With a binding high-speed small (1.3 MB) and living in a multi storage House, is it a lot to win add a device from the airport to the BT router?

Similar Questions

• Problems with mathematics at high speed on FPGA

  I'm new on fixed-point numbers and math at high speed on the FPGA. I use the 7962 with 5751 adaptation module. I am writing a few simple codes to convince me that I understand what I do before writing code more complex. I wrote a simple code to divide two numbers and then multiply the result with one of the original numbers. The block diagram is shown below.

  

  Looks like that the fracture is not working properly. But the multiplication always gives zero, and I can't understand why. A typical result of the façade is illustrated below.

  

  If I remove the divide, the multiplication seems to work fine. Any idea on what I'm doing wrong would be greatly appreciated.

  After more than a day of scratching my head, I realized that one of the entrances to the multiply function is always zero, because it is read 52 cycles later (i.e. when the structure case is false). To resolve this issue, I added a node back feed, so that the data is made in advance and are available to the function to multiply once the function of the line ends. I have attached a picture for those interested / with similar problems.

  

• When I start my computer, it seems to stall until the CC box. As I am on a connection high speed limited is CC connect and stay connected to the internet using a portion of my allocation of limited use.

  Internet and CC slow down my computer at startup upward and using resources of my pocket money to broadband

  Stan, you can disable the creative menu topic Cloud file synchronization.

  Go to: gear on the top right corner icon > preference

  You can also uncheck "Start with the connection".

• When I add a picture (from the organizing elements) to the timeline it seems horrible completely filled with vertical lines (first 14 elements). Not with the first element 11.

  

  Premiere Elements cannot work with 16-bit color. Please set the photo on 8 bits per RGB channel.

  Also resize the photo to 2000 x 1500 great will improve performance

• Working with USB high speed Interface Modul 2.7 in LabVIEW

  Hello

  is there an example works with a USB high speed Interface Modul 2.7 in LabVIEW?

  The EGG is a "Cypress CY7C68013A-56PVXC»

  Thank you

  Best regards, patrick

  Hi patrick,

  I searched on google for the module. The manufacturer is Braintechnology.
  If you need a LabVIEW driver ask them please, maybe it's that they can provide you with a.

  Braintechnology offers a DLL - USB. With a little work, you can include this dll in your LabVIEW project (call library function node).

  The following documents explain how to:

  Integration of external Code with the Shared Library Import Wizard (requires a corresponding header dll)
  http://zone.NI.com/DevZone/CDA/tut/p/ID/2818

  Writing Win32 dynamic link (dll) libraries and qualifying of LabVIEW
  http://zone.NI.com/DevZone/CDA/tut/p/ID/4877

  Example: Passing a variety of Data Types in the DLL for LabVIEW
  http://zone.NI.com/DevZone/CDA/EPD/p/ID/1288

  Kind regards
  N. Ralf
  NIG.

• WiFi unstable and slow Internet high speed

  Hello world:

  Recently, I am facing a problem of unstable wifi, slow speed of the internet of my macbook pro. I hope someone could help me with my problem.

  
  

  Symptom:

  Internet mainly speed just unstable using a wifi connection. (no problem with wifi connection self and my wifi suddenly grave would not be)

  Example:

  • FaceTime with my friends and the connection would suddenly abandon or images & audio gets fuzzy.
  • Videos in online streaming and suddenly occurs buffering.
  • Download file of software update iPhone via iTunes, the speed is slow, he needed to take 2 h at the end and later on a window display "cannot download and check your internet connection".
  • Suddenly cannot open websites like site apple.com, google.com. Sometimes it will take more time to open Web sites.

  Hardware and software:

  MacBook Pro mid-2009, OS X EL Capitan 10.11.5

  ISP: Cox, 50Mbps

  Modem & router: Netgear N450

  Test:

  Turn off my wifi and connect my macbook pro with modem & router with cable, internet high speed is stable and fast. Internet speed download speed test result display is of around 60Mbps, download speed is around 8Mbps. And I tried streaming using the connection cable, there was no buffering.

  I already tried the possible Solutions:

  • Restart the Macbook pro and restart Modem & router: will not work. I mean the internet will be very well at first, but later would be unstable again.
  • Reset Wireless Modem & router and change channels: useful, but not completely solve the problem. After you change the wireless channel, I tested my internet speed and the result showing 20-40Mbps (slower than 60mbps) speed download. Sometimes, the result will be like 6-8Mbps and sometimes it will be 60Mbps. If its unstable.
  • Wireless diagnosis: result indicates connection is good.
  • Called my ISP provider: they checked and said all right.

  
  

  Other Questions & details:

  • The internet is ok for most of the time. But when all of a sudden I can't open site or I can't download and streaming & FaceTime at normal speed, his frustration.
  • I thought it might be related to my hardware since its an old macbook pro. I can't run Apple hardware test because I don't have the installation disc more and my macbook pro is very old. Is it a third party software that can perform the test hardware on mac?
  • My wifi used to be very stable and I don't have to worry. Just for these last two weeks.

  
  

  
  

  I really appreciate your time and help! Looking forward to any reply!

  Wi - FI connection drops

  Connection Wi - Fi in OS X Yosemite problems

  Wi - Fi in OS X Yosemite connection problems (2)

  Connection Wi - Fi in OS X Yosemite problems (3)

  WiFi potential temporary fix - Yosemite

  Also try turning off Bluetooth.

  WIFI AND BLUETOOTH FINALLY SOLVED, NOT REALLY - YOSEMITE 10.10

  If your Wi - Fi source is capable of generating a 5 GHz Wi - Fi network, try that in order to avoid conflicts with Bluetooth.

• E3000 won't handshake with the edge router

  Recently, I bought new E3000. I place the E3000 with edge router static IP address rather DCHP which seemed failing at the same IP address and DNS. Associated with the E3000 laptops have their own IP which differ from the IP address of the border router. E3000 is configured with firewall No. minimum protection, for now. The reason for a minimum protection was to get the handshake between the two routers. The border router is a product of Verizon. The old router I was using is a Netgear who did the handshake with the edge router. I have the latest firmware for the E3000 version of the Firmware: 1.0.04)is build 6. Router will not handshake with wired connections or wireless. Used to connect to the E3000 laptop is running Windows 7 Ultimate.  In fact, all laptops here use the same OS and connect wirelessly. I've tried the package of software provided on the site, which housed a diagnosis that apparently could not solve the problem as well. I have not idea about why E3000 not handshake with the edge router. Can we make a few suggestions. Thank you to all those who respond.

  What is the IP address of the router Verizon? What you write suggests that the Verizon router uses 192.168.1.1. If this is the case, establish the E3000 as a switch simple ethernet access point as follows:

  1. disconnect the E3000 from the Verizon router.
  2 wire a single computer in the E3000.
  3. open the web interface at http://192.168.1.1/ (or whatever the IP address you put it now).
  4. on the main configuration page, make sure that your type of internet connection is on "auto/DHCP.
  5. on the same page, set the LAN IP address to 192.168.1.2.
  6. on the same page, disable the DHCP server.
  7. save the settings.
  8 unplug the computer and one of the LAN ports numbered from the E3000 wireless to your router to Verizon.

  That's all. Now, you can use the E3000 as access point and you can use the remaining 3 LAN ports for wired devices.

• Help with the VLAN routing

  I'm pretty green when I just went and routing configurations please bear with me.  I'm available what I want to achieve and what I could do until now (although it may be completely wrong).

  I have an office where we run low on IP addresses for our local network, the obvious answer is to get VOIP phones on their own subnet.  So, I have a switch PC6224 I want to use to create the second subnet.

  Existing Workstation LAN = 172.22.144.0 (255.255.255.0)

  Default GW for the LAN = 172.22.144.1 for all devices on that subnet

  I would like to create an IPPhone = 172.22.145.0 (255.255.255.0) subnet

  Here's what I have "Achieved" so far:

  Currently, I can ping from a client on 172.22.145.x to the 172.22.144.12 (VLAN 3 ip interface) but cannot ping any other 172.22.144.x that is not directly connected to the 6224 switch device.  Trying to ping the network 172.22.145.x device leave a device plugged into the 172.22.144.x VLAN on the switch of packets results was sent to the default gateway for the network (172.22.144.1) who does not know what to do with them.

  Here is my config of 6224 switch operation:

  Console execution #show
  ! Current configuration:
  ! Description of the system "PowerConnect 6224, 3.3.6.4, VxWorks 6.5.
  ! 3.3.6.4 system software version
  ! Passage mode is configured as disabled
  !
  Configure
  database of VLAN
  VLAN 2-3
  VLAN 2 1 routing
  VLAN 3 2 routing
  subnet of VLAN association 172.22.144.0 255.255.255.0 3
  subnet of VLAN association 172.22.145.0 255.255.255.0 2
  output
  battery
  1 1 member
  output
  IP address no
  IP routing
  IP route 0.0.0.0 0.0.0.0 172.22.144.1
  interface vlan 2
  name "IPPhone.
  Routing
  IP 172.22.145.1 255.255.255.0
  output
  interface vlan 3
  name "TWLAN".
  Routing
  IP 172.22.144.12 255.255.255.0
  output
  level of 746f7a78621059d80fdc538acc40cbf2 user name 'admin' password encrypted 15
  !
  interface ethernet 1/g3
  switchport access vlan 3
  output
  !
  interface ethernet 1/g4
  switchport access vlan 3
  output
  !
  interface ethernet 1/g5
  switchport access vlan 2
  output

  !
  interface ethernet 1/g6
  switchport access vlan 2
  output
  !
  interface ethernet 1/g7
  switchport access vlan 2
  output
  !
  interface ethernet 1/g8
  switchport access vlan 2
  output
  !
  interface ethernet 1/g9
  switchport access vlan 2
  output
  !
  interface ethernet 1/g10
  switchport access vlan 2
  output
  !

  interface ethernet 1/g11
  switchport access vlan 2
  output
  !
  interface ethernet 1/g12
  switchport access vlan 2
  output
  !
  interface ethernet 1/g13
  switchport access vlan 2
  output
  !
  interface ethernet 1/g14
  switchport access vlan 2
  output
  !
  interface ethernet 1/g15
  switchport access vlan 2
  output
  !
  interface ethernet 1/g16

  switchport access vlan 2
  output
  !
  interface ethernet 1/g17
  switchport access vlan 2
  output
  !
  interface ethernet 1/g18
  switchport access vlan 2
  output
  !
  interface ethernet 1/g19
  switchport access vlan 2
  output
  !
  interface ethernet 1/g20
  switchport access vlan 2
  output
  !
  interface ethernet 1/g21
  switchport access vlan 2

  output
  !
  interface ethernet 1/g22
  switchport access vlan 2
  output
  !
  interface ethernet 1/g23
  switchport access vlan 2
  output
  !
  interface ethernet 1/g24
  switchport access vlan 2
  output
  output

  Console #.

  Any help would be greatly appreciated.

  Thanks, Grant

  What port connects to 172.22.144.1 the jump according to the internet?

  What should happen is we need a VLAN 'remote' separate just for the connection between the 6224 and your 172.22.144.1 jump following the internet device.

  If 172.22.144.1 remains the same, then you must create another local network VIRTUAL to "TWLAN".  Eventually, VLAN 4 with a range of ip addresses of 172.22.146.1 - 254 255.255.255.0.  Where the VLAN 4 interface has an IP address defined as 172.22.146.1.  Once that all connected devices again VLAN 4 that were in the VLAN 3 need to change there IPs and gateway 172.22.146.1

  So the only port that has configuration of VLAN 3 is the connection to 172.22.144.1 port next to the internet break.  The IP address defined on the interface VLAN 3 should be in the same subnet as 172.22.144.1 range.

  Here is a diagram that can help you to see the whole upward.  VLAN 100 in the diagram represent VLAN 3 in your case.  Switch 2 would represent your device from the internet of next hop.

  

• ADE 2.0 and 4.0 do not work with Windows 10. The next problem is generated when you try to download a book from the public library.    Error getting License Server Communication problem E_ADEPT_DOCUMENT_OPEN_ERROR.

  The next problem is generated when you try to download a book from the public library.

  Error getting License Server Communication problem E_ADEPT_DOCUMENT_OPEN_ERROR.

  The work around works of Jean.  It would be nice if Adobe provided a real difficulty however.

  I have ADE installed 4.03.  The problem will occur as soon as that ADE is closed and reopened.    It takes so the patch every time allows you to download a book ADE.

  1. for Overdrive - select a book and click Download. -pop - up - select - Save file. - under the open with select - acsm_auto_file - download the file of social mobilization in your download directory.

  2. expand the Explorer open the file - go up to the OS (c)-

  -go to Program files (x 86) - enlarge

  -to enlarge Adobe

  -go to Adobe Digital Editions and the left click.

  -On the right part of the screen right click on Digitaleditions.exe.

  -Pop - up menu - on the left, click PROPERTIES

  -Pop up to select COMPATIBILITY

  -at the top of the menu compatibility, choose the resolution of compatibility issues run

  -Pop up to select the troubleshooting program

  -Pop up choose the program worked in earlier versions of windows, etc.

  -on the left, click NEXT

  -POP up - which version etc? Choose that I don't KNOW

  -on the left, click NEXT

  -POP - up - left click Test Program-

  -AT THE TOOL Avantek of window screen, a FLASHING ICON will appear - left-click on the icon - a pop-up will ask you if you want this program to change etc. On the left, click Yes.

  3. ADE open - make sure ADE is in library view.

  -Left click on FILE and then select Add to LIBRARY from the menu drop down.

  -POP UP - down to the right to choose the type of file of social mobilization

  -left side of the pop up to choose the directory where you downloaded the file of the CMHA.

  -Select the file of the CMHA in the right side of the window and on the left, click OPEN

  -It should work, but you have to go through the whole routine if you close ADE.

  I HOPE ADOBE will solve this problem. With each update of Windows 10 ADE seems crumbles a bit more.

• High speed continuous measurement of encoder with sampling frequency of 1 kHz

  I am able at all times the position of a linear encoder using a PCI-6602 counter card, and I need to know how to set up so that the counter rotating at high speed, but the data is inserted into the buffer at a frequency of 1 kHz.  I am able suddenly to a hydraulic cylinder, and I am not concerned about the event recording to high frequency except to the extent where they throw off the number considerably if the equipment does not run fast enough to detect all the impulses of the encoder.

  Now, I think is that the external sample clock signal control (routed internal pulse output counter) time rate whereby the equipment detects the impulses of the encoder and the rate at which it inserts data into the buffer.  With a pulse 100 per inch encoder and a sampling frequency of 1 kHz, the extended final position of the cylinder is turned off by +/-0.15 inches, which is unacceptable.

  I need calculate a speed of this information, so I prefer not to use software timed sampling to control this (it's more difficult programming for other reasons as well - several asynchronous measures).  Any ideas on how to configure the hardware to count faster than the speed at which she inserts counties in the buffer?

  OK, you're clearly on the right track here, so I will focus on some details.

  1. How do you know that the +/-0.15 "differences are * measurement error rather than * error of movement?  Why wouldn't be an accurate measure and a proposal which can vary slightly from the nominal value?

  2. I wonder some all electric noise and defects that may produce false edges.  The fact that the behavior was better by using a sampling rate limited (200 kHz) in the digital inputs may be that some of these flaws were so short that they were never captured.

  I did a ton of work with the Commission to 6602 encoder and I can certainly confirm that count equipment is sensitive to the edges in a few tens of MHz.  (I know its 80 MHz for edge counting, but I think I remember that it can be of the order of 20 to 40 MHz to accommodate the time of signal propagation extra of the quadrature decoding circuit).

  A small point of clarification.  You're talking about the speed at which the meter "works to.  The value of count is a register whose value is changed completely by the circuit, * independent * of the sampling frequency.  If you enjoy with material-clocked County in memory buffer or interrogation of software without buffer not a bit for circuits that increments / decrements the value of the counter register.  (In other words, I am completely convinced that you would get commensurate with position end even if you took only 1 sample software-polled after the end of the move instead of sampling at 1 kHz all the way through.)

  So, if the value of the counter is disabled, it is because the circuit detects producers of County of the edges that shouldn't be there.  Something you can try is to set up digital debounce filter for input lines of the PFI corresponding to the encoder Source inputs and to the.

  -Kevin P.

• How to use Sync high speed (HSS) with the HVL-F60M on a NEX-6

  I recently bought the HVL-F60M flasgship flash for my NEX-6. I can't see how to exploit the higher with the NEX-6 synchronization speeds. The built-in pop-up flash is limited to 1/160th shuter speed flash sync. The HVL-F60M claims can I synchronize the maximum of 1/4000e camera which is one of the main reasons I bought this flash. I've scoured the menus but can't find this configuration. Can someone point me in the right direction. Thank you.

  Hi, thanks for the response. I since found that HSS is disabled when the flash HVL-F60M has the bounce flash diffuser installed. There is a small magnet on the hood that tell the camera what it is attached. I guess that the indirect light and power are not suitable for high speed motion gel. I can adjust the shutter speed all the way up to 1/4000 in mode S and M. which concerns

  cmosse wrote:
  

  • Make sure THAT HSS is activated on the flash
  • Set the camera to the mode S and select shutter speed<>

• Portege Z30 16 GB with high speed Port Replicator III and two monitors - resolution

  I have a Portege Z30 with 16 GB of Ram, connected to a Toshiba high speed Port Replicator III which is connected to two monitors running in mode extended.

  The monitor attached to the first section of the video is 1920 x 1200 running.
  However the second monitor is only show support for a maximum of 1280 x 1084.

  The monitors are identical, and both are connected by DisplayPort cables.

  I tried to lower the resolution and save the settings on the first monitor to see if it offered options on the second monitor, but the options remained the same.

  At this point, I have narrowed down to 1280 x 1024 so that it conforms to all the monitors but would like to a plus-res solution.

  Does anyone know if there is a fix/work-around for this?
  If this is a hardware limitation, has anyone tried a USB 3 to DisplayPort adapter in a similar configuration?

  Thank you!

  At the same time using two displayports?
  I wonder how it is possible, because of my knowledge it is not possible... as far as I know the Port Replicator III supports two DisplayPorts but you could choose and use one of them...

  In any case, you can use both with a lower resolution, I guess that this problem can be caused due to incompatible display drivers.
  I suggest you to uninstall reinstall or update the display drivers and check if it helps

• A measure of speed high speed with encoder in quadrature and NI 9401 on cDaq

  Greetings,

  We use an encoder in quadrature with 360 pulses/turn on the tracks (track A and B) and no trace of Z to measure motor speed at startup. Data acquisition, we use a NI 9401 in 9178 cDaq chassis and a pc with LabVIEW. The problem is that the start-up period is relatively short (less than 1 second), during which we measure speed as precisely as possible. The speed range is from 0 to 10000 RPM.

  What type of measurement method that you would recommend.

  Here are a few methods that we have already tried:

  -Measure with DAQmx CIFreq--> high frequency with 2 counters: speed measurement, but with a very big mistake (+ 166 RPM).

  -CIFreq DAQmx--> wide range with 2 counters: good speed data but more slow measurement,

  -CICntEdges DAQmx (counting separated the two lanes, speed conversion): very incoherent speed data.

  Thanks in advance for your help.

  Matej

  I would definitely say a 4, the measure of a low freq called option with 1 meter.  (Frankly, I've never been

  fond of this name because it is useful for freqs much higher than what I expect most people think "low freq".)   This

  is the method that I almost * always * use for frequency of counter measures.  It works really well to capture transitional

  variations in speed.

  10000 rpm and 360 cycles/rev, you are looking at a maximum frequency of 60 kHz.  The frequency measurement mode 1 meter

  There will be 80 MHz internal clock by encoder cycle edges, then you will get more than 1000 strokes per measure.  The point

  that means only 1 number of quantization errors, you can expect<>

  Further, you can average overall, say, 10 samples to you give even better accuracy and you could still be a data capture

  rate significantly higher than the probable bandwidth of your mechanical system.  (The average would just clean the jitter and noise and would not

  Hide answer true mechanical characteristics).

  -Kevin P

• How to get sync high speed off faster with a 60 d and 430 ex ii camera?

  I try to get my speedlite 430 to sync high speed with my camera off camera.  Once I did all that I can't get a shutter speed of 250.  I need the higher speeds for what I want to do and I need the flash off camera.

  What do you use to control the 430EX II off-camera?  You have a speedlite controller or another flash speedlite?

  The 430EX II supports Sync high speed when it works as a remote off-camera/slave flash, but it's automatic.  If the flash unit is set to use high sync speed then the slave will also use high sync speed... you have not actually the value of the slave in sync mode high speed.  (See page 29 of the manual 430EX II).

  If you use the built-in on the 60 d flash to trigger the 430EX II then this could be the problem because the built-in flash does not support Sync high speed.

• T3i sync high speed with popup flash?

  When shooting outdoors with a light background, it would be nice to be able to use the flash pop-up as a fill light (to the shadows on a face, etc..). However, the shutter speed is set to 1/200 when the popup flash is in place, overexpose the scene. Is there a reason why the pop-up flash can't sync high speed like an external flash to allow a faster shutter speed and always get a filling?

  Thank you

  David

  It has to do with the amount of energy is available for the flash.  A more powerful flash can more easily manage the sync high speed.

  Sync and sync high speed are related to the work the Shutter curtain on any SLR digital.  There are two doors.  A slides open, and close other slides.  The reason for which there must be two doors (instead of one) is because that if there is only one, then the door would slide open, then reverses to slide.

  Assume the following scenario were true:

  Suppose it takes the shutter a full 1 second door to slide open.  If we set an exposure time of 2 seconds, the following should happen if there was only one door.

  -l' shutter starts to slide open from left to right, allowing light to reach the pixels on the left edge of the sensor.  The right edge is always in the dark.

  -as slides of doors, more and more pixels are eposed to light.

  -a second later reached the opposite end and all the pixels are exposed to light, but the door must immediately reverse and start close because it will take a full second to slide the door closed.

  -the door begins to move and immediately the pixels on the edge of most on the right are in the dark, because they are covered by the shutter, but the pixels on the left edge are still exposed to the light.

  -the door has finally reached the edge against a second later and no pixel is exposed to light.

  Think to what just happened... the pixels on the edge of 'left' of the sensor got a second exhibition 2... but the pixels on the right edge of the probe were barely exposed for a fraction of a second.  You'd have a horrible blow to look.

  To resolve this problem, the camera uses TWO doors... begins a sliding open... the other follows a moment later (based on the selected shutter speed) and starts sliding closed.  Now, all pixels are exposed for the same period of time, regardless of the shutter speed you use.

  But the reality is they are mechanically sliding doors and it takes time to move.  Flash sync speed is shortest possible exposure that can be turned where the first door has enough time to COMPLETELY slide open so that when the flash goes off, the entire sensor is exposed and benefit of lightning.  The second door can slide THEN closed.

  If you do not use flash and you set a very fast shutter speed (say 1/1000th) the second door actually starts closeing long before the end of the first door opening.  In fact the second door is "hunting" the first establishes a "slot" which sweeps the sensor.

  With this in mind... now think just what a flash how to predict sync high speed.

  Assume that your camera has a maximum speed of flash-sync of 1/200th, but you want to shoot at 1/400th.

  This means that the first door must begin to open.  When he reached the midpoint, the flash must trigger to light the subject - but half the sensor did not lightning.  The second door closes as the first door continues to open up.  When the first door reaches the opposite edge, the second door will now be in the middle.  The flash needs to fire AGAIN - this time to expose the pixels on the 2nd half of the sensor.

  This means that the flash should fire TWICE in quick succession and the impulses must be PRECISELY 1/800th second (half or your second 1/400th total exposure times) apartment.    No flash would be able to recycle in just 1/800th dry if she gave a burst of the power of the light.  In other words, that it must reserve at least half of its power for the second round.

  If you increase the shutter speed to 1/800th... now the flash to trigger FOUR times and no single burst may be stronger than 25% of the power of lightning - and gusts must precisely timed occurs 1/1600e seconds, independently of the other.

  You can quickly see how this is going to require a flash with a power or you won't be able to finish the sync high speed on something more than just a few feet.

  For the light of day, the most brilliant exhibition is going to be the sunny 16 rule... f/16 with the shutter speed, the value in contrast to ISO.  So, for 100 ISO, you can use 1/100th sec.  To f/8, you can use 1/200th (and now you are still below the max flash sync speed).