beyond the image mask color

Similar Questions

• Photo extends beyond the image in PDF format

  Adobe InDesign CS 3 on PC platform. I have a problem recurring and random whereby when I import a picture in a picture frame, and then make a PDF, one or many edges of the photo extends beyond the image in the PDF file.  The photo is fine in InDesign. How to solve this problem?  Example is found in the attached PDF, page 2, the photo with the caption that begins with "material ships Aeroglide in large modules...". »

  Shelly

  What is the difference between the width of the image and the width of the image? If it is less than 3.2 mm (and it sounds like it could be), then you can see the same bug that Andrew Millar described last month:

  http://forums.Adobe.com/message/2534024

  The problem occurs in InDesign CS3 and CS4 on Mac & PC (XP) (10.5.8). If you have a picture in a picture frame and the frame is crop the image less. 0625 "(1/16th) * and you export a PDF the frame disappears." This reveals the image that shouldn't be there.

  If crop you the image. 0625 * or more or if the frame fits the image is no problem. The image is not move or scale when that happens, you get just a small piece of the picture that should not be there.

  • I don't know about the exact measure, I know that 1/16 works around a 1/64 is not (Yes we have that picky customers)

  So if you can invent your image more than 1.6 mm larger than the frame (just sufficient it a fraction) on all the edges, this bug should stop biting according to tests of Andrew. It will take about 58.5 mm width if this framework is 55 mm wide.

  Noel

• Release the Images masked - and - unable to separate what had been hidden

  Sometimes, when I hide a picture - or hide in fact - a group of several complex images, when I have communicated the mask, it is impossible to separate the images. Is it possible to make hidden groups but then not having that happen? Thank you very much. BTW CS5.

  You can post a screenshot of one of the files before and in the end the mask was released, showing the layers panel and the appearance Panel. I t would be a good thing if the layers Panel has been expanded so that we can see if there's anything unusual about the art.

  The appearance Panel woud be good as well.

• Displacement of the image mask.

  I have just moved from CS3 to CS6. Previously, when you work on a layer mask I could make the active image by command - ~. It does not work now - is there an another keyboard shortcut for this? I can't find any references to this anywhere. I use a Mac, OS 10.7.4.

  From CS4, you must "Option + click" on the layer mask to reveal the toggles between the image and the mask.

  However, there is an option that CS6 is for experienced users inherited, like you!

  Photoshop > Edition > keyboard shortcuts.

  

  Activate the check mark on the reading highlighted area in the image - use Legacy shortcuts channel. You will be able to revive the existing shortcuts for channels / layers.

  Note that CS6 has many improvements in orders of shortcut to the other layer / channel options and tools within the PS you will be sacrificing these if you choose to use channel Legacy shortcuts.

  However, the trust that helps

• Divide the Image background color does not Matching - Murray * ACP * please help!

  Actually, can someone who wants to help, but Murray helped me before so that he will get the references.

  I noticed you said on my Murray design, making the stretching of the site due to funny content in the background of the image being degraded. So I changed it to a solid color, a simple gray. But now it will not correspond to the top of the image for the image and I'll have a particular problem with the image of main_right.jpg regarding the color change. I can't even select it.

  Here is my link to see what I mean:

  http://www.canadianimprovshowcase.com/About2.html

  And I'm posting the link I noticed that the right side is even more fucked up! Man am I frustrated!

  Thank you

  Matt

  [email protected]

  Congratulations!  The only problem now is that you erased the black 3px border 1px - replace and vertical expansion will be visually homogeneous.

• any ideas on the images masked?

  I don't know how - UrtheCast - The Earth video camera (pronounced "earthcast")
  masking of image under move scratches...

  Thanks for the ideas!

  Hello

  You may be looking for this, check the video below

• How to get a constant of the image with color

  I've seen of many Labview program that has a constant 'photo' but with a specific color. I tried to do, but I can not just know how to get it.

  Can someone help me

  G

  
  

• Key shortcut (or batch) Image-> Auto color - and - save in the same format

  I scanned a lot of old photos in color, positive.

  FWIW, I scanned the sRGB in the scanner software settings.

  24-bit color, 600 dpi resolution

  Images are not professional, just for screen viewing.

  Probably not, but if... or even not at all printing is required, it will be 4 "x 6" (10x15cm)

  The scanned images are somewhere between 5-6MB (still intact)

  Almost all have this yellow and even slightly red color change.

  Found the Image-> Auto color restores the color well.

  Nothing more useless.

  For now, I need to

  1. open one by one,

  2 then image-> Lee,

  3. save,

  4. Select JPG (it is set by default to .psd).

  5 crush the source.

  Q: is it possible by using a keyboard shortcut?
  If so, how can I proceed?

  (I'm not an expert on this topic, sorry)

  Don't talk about 375 to 400 images.

  Photoshop CS6.

  First of all, I will copy them all to a new '-working folder ", to keep the original scan yet.

  Then:

  Open - say - a half dozen

  Select 1,

  shortcut key

  Select the 2nd

  shortcut key

  Select the 3rd

  etc.

  (I want to see the results before closing)

  Thank you!

  =

  Are the original scan JPEG files?

  The files must be of the same file format to crush.

  Anyway, you can record an action with a stop/continue after the step of automatic color.

  Then use file > batch automate to open, run the action and save the files.

  Something like below:

  Action:

  

  Lot:

  

• How do you change the default mask rubylith color?

  Anyone know how to change the default mask color permanently? I have never want this bright red default "rubylith" and am so tired of having to change color every time I do a new mask! (This process takes 6 clicks!)  I just want it to be automatically my default color.

  Double-click the button quick mask (button down in the toolbar)

• Large black (or white) box on the top of the image in Photoshop (does not record on the file)

  It started all of a sudden - a black box (sometimes white)

  appears on the top of the image & mask what Im doing. It is not present when I save the file - only when Im trying to work on it. I don't see what Im doing in the image

  Help!

  James

  Anyone having problems with black and white squares, launch Bridge and go in Camera Raw preferences and at the bottom of the window make sure 'use graphics processor' is DISABLED.

  This is a temporary work around, but it's going to at least squares disappear.

  Chris

• I have horizontal lines and the image overlap downstairs in my Sony Bravia LCD KLV32BX320

  I have a Sony BRAVIA LCD TV M no. KLV32BX320. It works well, but yesterday when I was watching TV all of a sudden it appeared a few horizontal lines at the bottom of the screen and there is overlap of the image and color a dysfunction in this area, which is on the underside. I turned off the television and put into service later in the evening, but the problem persists and is still doing today. Help, please.

  Good afternoon!

  Please try the following link in my post. From there, it will provide you with a few troubleshooting steps that you can use to fix the horizontal lines that you get on your screen.

  If my post answered your question, please mark it as "acceptable Solution".

  Thank you for your message.

  http://www.community.Sony.com/T5/television-picture-sound/horizontal-lines-on-the-screen/m-p/100261#...

• Hello, I want to make an outline of the text that I created.  I started with a blue background.  Then, I created a text and changed the color of gold.  I then put on an image and used the clipping mask to show the image by the text. Problem

  Hello, I want to make an outline of the text that I created.  I started with a blue background.  Then, I created a text and changed the color of gold.  I then put on an image and used the clipping mask to show the image by the text. Problem is it gets rid of color and shows that the peak through the text.  I wanted a draft of the text with the picture.  Is this possible?

  Thank you

  Peter

  You're welcome, Peter.

• Cannot make the fx color correction without getting the image of strobe

  Cannot make the fx color correction or blur fx with masks without getting the image to strobe. Do not return in the sequence, or export without the video strobe effect. It is clearly a problem since at least 2011 because I saw some forum posts dating back that far. Don't know how or why it is always a question 5 years later. I have the correction color fx on an adjustment layer that makes very well. Leave color and blur fx on a couple of individual clips is whats creating the problem. Does anyone have a solution? It does not appear that I can wait for Adobe.

  At this point, I would create a sequence for each clip (in the garbage, make a right click, create sequence and apply the FX it) then replace the clips in the mixture with the sequences.  -Test this point by one before they go crazy.

  OR, using the idea of sequence preceding above, return on a new clip with holiday color applied to replace as new originals in the mixture.

  Third idea: replace the clips with linked AE comp and try the color of leave which are.

  In short, do what you can to take the color of leave out of the final equation.

• You can use the range of colors in quick mask mode?

  I like to use the color range and the use of masks is quick to make a selection, but when I enter the Quick Mask Mode, I can use is no longer color range. I want to be able to do is:

  1. Enter the quick mask
  2. Range of colors allows you to make a selection
  3. Specific areas of this selection, I want to use as a paint mask
  4. Quick mask out of having my spiffy painted areas as the selection

  If all thinking is possible? I'm in CS6, and I've been looking to make this option available for years.

  No, range of colors will not work. It should be greyed out, otherwise you'll be sampling your mask and your image.

• Gum changing from white to black on the layer mask, leaving the image transparent.

  I used the following method in CS5 to erase parts of a layer/bring these pieces back again if necessary. It works in the same way after that I upgraded to CS6 (not sure if the version difference plays a role or not.)

  What I'm doing here is blend two layers that overlap in one of the other

  1. create the layer to the top layer mask

  2. Select pure white in the color selection window

  3 select the Eraser tool, set the opacity to 30%, 50%, flow 100% hardness

  4. Select hide, erasing the edges of the image where there is overlap to eliminate hard edges and merge the images into another

  5. when I need to highlight an area of the image at the top (one mixed), I pass the color pure black opacity set to 100%, hardness 100% and paint over the areas that I want to "undo" my deletion.

  -Sometimes happens a lot after my initial deletion, so a simple cancellation or who goes back in history is not a possible solution at this moment here.

  -Another note: I have to move over the other layers to align as much as possible, make the story do not brush useful in this case.

  Previously, this would simply restore the image to where it was originally for this place, by removing completely all masking. Now, when I do this procedure, the area that I'm trying to "undo" is however, as if the opacity is set to a level lower than 100%. This poses problems because I want to have the completely opaque image at this stage.

  Some other notes I hope to answer some questions that may arise in advance:

  I haven't settled the opacity of one of my layer masks

  I tried to do the same operation by using the Brush tool (with 100% opacity and hardness, using the opposite colors), with the same result

  As we have earlier I don't know another effective way to achieve the same goal. I'd be happy to do it differently but if necessary.

  All the layers in these documents are dynamic objects

  Thank you!

  I'm sorry it's so confusing. I guess the only reason why I use the Eraser tool is a vestige of when I was actually erase the image - and also I get the brush and Eraser different opacity value to quickly switch between them.

  @Theresa actually, I didn't watch only the mask. Of course the mask was gray in the areas that I was talking about. But that lead me to realize that while the color picker looked purely black and white, I was working with a grayscale image, and it was in fact color and converted to looked at pure Grayscale black and white. I need to set the color of the brush at a certain point, when working in RGB (which I rarely do) and not realised.

  Sorry for posting something with such a trivial response, but you all help me to understand thank you!