BI publisher and interactive report

Similar Questions

• patterns of authentication and interactive reports

  Hello

  I have 2 groups of users with different levels of security access, so I need to restrict certain data in the interactive report. I want to create 1 report with all data and 1 report that excludes certain documents based on one of the fields. Can I do this using an authentication scheme? Can someone direct me to some good instructions on how to do this? I'm open to other suggestions as well.

  I have another thread on that as well, but I wonder about another method (limitation of access to the records in interactive report), hoping that it will be a little easier.

  Thank you!

  Rachel PRO wrote:

  I have 2 groups of users with different levels of security access, so I need to restrict certain data in the interactive report. I want to create 1 report with all data and 1 report that excludes certain documents based on one of the fields. Can I do this using an authentication scheme? Can someone direct me to some good instructions on how to do this? I'm open to other suggestions as well.

  I have another thread on that as well, but I wonder about another method (limitation of access to the records in interactive report), hoping that it will be a little easier.

  Authentication schemes are used to establish the identity of a user. Common methods to include validating a username and password, call an external mechanism to the SSO or scan of a fingerprint. Authentication schemes are not related to your problem.

  Did you actually means 'permission' rather than 'authentication '? Authorisation schemes determine the actions by controlling access to pages and components of APEX, a user can run. You can use authorization to control if a user sees a report region, but not the lines that are shown in this report (although technically possible, it is generally not the best approach).

  In short: authentication determines the identity of the user. Authorization determines the operations that a user with this identity can perform. Restricted access control these operations can be performed on the data.

  What you need is an access control and DTV and view the methods described in the other thread are solutions to that. Close this message and focus on the other.

• Mix of traditional and interactive reports fails the process of RESETTING of PAGINATION.

  I have a tab page where I got 3 different reports REPORT_A (classic), REPORT_B (interactive) and REPORT_C (CLASSIC) in alphabetical order. I have a page to reset pagination process that will always draw (without condition) when you visit the page with the tab.

  
  Reset pagination process that exists in the front scene of the header is set to fire but not to reset the interactive report. It affects the subsequent classic report REPORT_C as well. The REPORT_A would be reset paging very well since it exists before the interactive report. Is this a bug in apex?

  I created an application of demonstration of test with specific steps to reproduce the problem. The steps are on the demo site itself.

  http://Apex.Oracle.com/pls/Apex/f?p=56638
  SUP: testuser
  P: password

  Apex Version: 4.2.4.00.08

  In my real application I wish a dropdownlist control on the page based on which I would like to filter the data. The dropdownlist control will have a corresponding branch of after-submit who will absolutely perfect pagination to reset & RIR. But when we visit Web site by tab the above problem would break the page.

  I tried the solutions like gReport.search ('SEARCH') but that will only set the interactive report, not the classic REPORT_C. It's just a hack anyway.

  Any ideas. ?

  Hello

  Create before that the process header on page 12 that calls APEX_UTIL. IR_RESET

  Kind regards
  Jari

• Export and interactive report totals

  Hi all
  
  I tried to get the totals on the basis of an interactive report, but the only way I can find is to make it as aggregations and save it as the default report.
  
  The problem is when users download the report totals are missing, is it possible to have the total number, displayed and downloaded with an interactive report?
  
  Apex to 3.1
  
  Thank you
  
  Graham

  totally different approach would be to add totals to your choice.

  It works for some already very well grouped queries
  Something like

  select e.departmentid, d.name, count(*) emp#, avg(e.salary) sal
  from employees e
  join departments d on d.departmentid = e.departmentid
  group by e.departmentid, d.name 
  

  Displays the number of employees and the salaray average for each Department.
  Now we can add a total row using rollup, or grouping sets

  select e.departmentid,  d.name, count(*) emp#, avg(e.salary) sal
  from employees e
  join departments d on d.departmentid = e.departmentid
  group by grouping sets ((e.departmentid, d.name), ());
  

• paging and interactive report

  Hello!
  
  is it possible to change the default number of lines for paging in an interactive report? the default value is 15 and I need 30 or something like that. in a normal report, it is not a problem!
  
  THX!
  
  Bye,.
  Christian

  Hello

  Yes, you can set the value by running the report as a developer. Set the rows to the value that you want to save the report, and then choose Save as default settings. Then, when any user running the report, the values will be that you have saved will be used.

  Concerning

  Paul

• The column titles and interactive reports

  I noticed that when you create an interactive report (IR) with a name such as "PEI", when the IR is displayed, it comes out as "Pei". Short change this manually for all names of columns like this, is there a way to prevent the IR to make this 'conversion '. Other columns such as 'DOCUMENT ID' out like 'Document Id'. I really don't want to do this to the column titles, as acronyms that I want to appear as entirely in capital letters.

  Use custom column names... Cape of init is default IR

• sorting and interactive report

  Is it possible to have an interactive report but hide some columns in the action area. If users take to sort?
  
  Ex: created an interactive reports from the tables. There are columns with large text tabled. I would like users to sort on them for fear of perfomance hit. However, must these fields show on the report. Is it possible? All suggestions will be grateful.

  When you change a column in an interactive report

  Click on the interactive report
  Click on the column name

  In the column definition area, you can pick stocks, you allow the user to make on this column
  Allow users to:
  Charter of calculating overall sorting filter control Break

• BI analysis and creation of interactive reports and published reports

  Hi all
  
  all first of all maybe this very absurd question.
  
  I use bi publisher and write the report. now I need bi web service. I can web service with analysis and interactive reporting, but I can not with published reports. is this possible? and what is analysis of the fundamental difference between the reports (I have no store). pls help me...
  
  Sorry for the bad English
  
  better compliance

  Hello. Yes, you can run reports to BI Publisher using webservices.
  Documentation, explains how to:
  BIP11g: http://docs.oracle.com/cd/E21764_01/bi.1111/e18863/toc.htm
  BIP10g: http://docs.oracle.com/cd/E12844_01/doc/bip.1013/e12188/T421739T524310.htm

  Also, take a look at this blog of my friend Kan:
  http://bipconsulting.blogspot.com/2010/04/how-to-run-report-with-bi-Publisher-Web.html

  Concerning
  Jorge
  p.s if this answers your question please mark my answer as * "Correct" * or * "useful."

• Set the size of the field in the report and the interactive report

  Hello.
  
  I have 2 questions.
  
  1. How do I report and interactive report to broadcast 100% of the width of the screen, even with just 1 column?
  2. how to set the custom field size. For example, first field should be 100px 200px second and so forth
  
  Thank you.

  This is to answer your second question.
  Define the columns with a width of custom field?
  Go to declare attributes--> click Change next to the domain name-->
  Find the region column--> CSS formatting style:
  Enter the values you want to account for your specifications.

  Ex: CSS Style: Width: 100px
  or Style CSS: Width: 200px

• interactive report based on an existing table

  Many people, it is the next step in the construction of my app.  I watched a tutorial of utube produced from a worksheet a table in a database and a set of pages to enter data and to display and edit data in the table.  I already have the table and I would like to make the pages I've seen.  a spreadsheet as a table which allows the edition of each row and a button create on top.  I guess I was also able to delete a line if necessary. I think I need to creata a page, select report and interactive report.  Continues in this way, I get a request for a sql statement that will likely tell the page generator that he needs to create the report.  I need to make the report based on a table in another table space.  At this page, I entered in the query designer and my table space is not listed, only the current APEX of table space is available.  I went in a different direction to create a form for a table and to the bottom of the sequence, he also requested information in the table.  My table db space is listed as available and I am able to create the registration in a satisfactory manner.

  Then, why I can see and interact with my db table space when you create a form for a table but can not find the db table space when you generate an interactive report?

  Also, I'm heading down the correct path for the interactive report, that I need?

  "HustlingHare" alright, get ready to be the hero.  "" "You're almost there. '"

  (1) Firstly, nuke has report page IR that you just created.  You don't need it.

  (2) then go back and run the wizard to create a Page.  Choose 'Form', then 'form on a Table with the report '.  Because your DBUSER1 has privileges discrete objects on the table in the schema DBUSER2, DBUSER2 must appear in the select list of "Table / view owner" in this wizard.

  Follow the steps in the wizard to create the interactive report and form, and you're done!

  Joel

• Need help to create a button on a page of interactive report.

  Hello everyone,
  
  I am trying to create radio buttons on a page of interactive report. Here are sql, used for the radio and interactive report button:
  
  Select apex_item.radiogroup(1,a.key_atm_insp) as "select."
  b.KEY_LOCATION,
  b.NME_INST,
  b.ADR_STREET,
  b.ADR_CITY,
  b.ZIP,
  a.KEY_ATM_VIOLATION,
  a.KEY_ATM_INSP
  ATM_VIOLATION a.,
  ATM_BRANCH_INFO_TT b
  where b.KEY_LOCATION = a.KEY_LOCATION;
  
  Above sql create several lines, but do not create the radio button instead show the text as ' < input type = "radio" name = value "f01" = "29039" / > "on the browser. Here is an example of one of the line that displays o browser.
  --------------------------------------------------------------------------------------------------------------------------------------------------------------
  < input type = "radio" name = "f01" value = "29039" > 48552 JPMorgan Chase Bank, National Association 82 road & Route 376 Hopewell Junction 12533 693 29039
  --------------------------------------------------------------------------------------------------------------------------------------------------------------
  
  Your help/comments would be very appreciated.
  
  REDA

  go to the report attributes, Edit Column ("Select" column) change the view regarding "* Standard report column."

• ERR-1777 interactive report on Mac Safari 4

  In interactive reports, the quick search box allows me to search for text that appears in the line. In Firefox and IE (on the PC), I can type the search criteria in the quick search field and press < enter > to have the page then automatically filter the report for my results. In Internet Explorer (IE 7 and 8, at least), I hear of PC Speaker beeps weird after validation <>, but my results invented.
  
  When I perform this action even on a Mac using Safari 4.0.2 I get the error:
  

  ERR-1777: Page 1 provided no page to branch to. Please report this error to your application administrator.

  Is this a bug or maybe something has changed in Safari recently because of this problem? I searched 'ERR-1777' and 'Interactive reports' and 'Safari' and I found nothing special in it. Anyone has any ideas on this?
  
  Shane.

  Hi Shane
  You know that Apex only supports Internet Explorer & Firefox. You use a different browser, you can get weird results.
  It comes to the Application of the Express Installation Guide:

  2.2 browser requirement
  To show or develop applications, Oracle Application Express, browsers Web must support Java Script and HTML 4.0 and CSS 1.0 standards. The following browsers meet these requirements:
  -Microsoft Internet Explorer 6.0 or later
  -Firefox 1.0 or later version

  Concerning
  Oscar

• Dynamic interactive report

  Hello
  
  I have a requirement to create the financial report of pivot using interactive report. I managed to create a function retutning the dynamic query for the report of pivot as follows:
  
  CREATE OR REPLACE FUNCTION
  fnc_pivot
  RETURN VARCHAR2 AS
  CURSOR cur_qry IS
  SELECT DISTINCT', SUM (CASE WHEN financial_year = "')
  || financial_year
  || "' ' AS case_st
  (' THEN annual_allocation END) AS
  ||'"'
  || financial_year
  ||'"' AS case_head
  OF finance_table
  ORDER BY case_head;
  
  l_query VARCHAR2 (32000) DEFAULT NULL;
  BEGIN
  BECAUSE me IN cur_qry
  LOOP
  l_query: = l_query
  || i.case_st
  || i.case_head
  || CHR (10);
  END LOOP;
  l_query: = 'SELECT id.
  || l_query
  |', ' SUM (annual_allocation) AS
  ||'"'
  ||' Total general '
  ||'"'
  ||' OF finance_table '
  ||' GROUP BY id';
  
  Return (l_query);
  
  END;
  
  Which returns the following query:
  
  SELECT fin._id, SUM (CASE WHEN fin.financial_year = ' 2007/8 ' THEN fin.annual_allocation END) AS "2007/8.
  , SUM (CASE WHEN fin.financial_year = ' 2008/9 ' THEN fin.annual_allocation END) AS '2008/9 '.
  , SUM (CASE WHEN fin.financial_year = ' 2009/10 ' THEN fin.annual_allocation END) AS '2009/10 '.
  , SUM ("CASE WHEN fin.financial_year = ' 2010/11" THEN fin.annual_allocation END) AS "2010/11"
  , SUM (CASE WHEN fin.financial_year = ' 2011/12 ' THEN fin.annual_allocation END) AS '2011/12.
  , SUM (CASE WHEN fin.financial_year = ' years future "THEN fin.annual_allocation END) AS"Future Years ".
  SUM (annual_allocation)
  OF end financial_table
  GROUP BY fin.id
  
  And these are the results
  
  
  
  
  Total general 2011 2010 2009 2008 2007 ID/8/9/10/11/12 years to come
  0 121 541 2545 1454 5454 3545454 CHWP01L201
  80000 654534 45654 4545 545 54545 212545 CREP01L201
  
  
  
  So if I create a normal SQL statement (function of PL/SQL returning query) it works beautifully, but as we cannot make the same Interactive report I created an apex_collection based on the above function.
  
  Here's my problem, because the columns are dynamic can't go and create a report based on ' Select * from apex_collection ' that returns all the 50 columnswhether apex_collection they gave or not. And even if I do "Select c001, c002 c003... Of apex_collection 'headers are' c001, c002... rather than the exercises I need.
  
  Has anyone had a similar problem? Is there a solution to this problem or should I just wait and hope that the next version of Apex has this feature (and no, Oracle buddies, no sarcasm here, only resignation after day of head breaking with no solution).
  
  Any help will be much appreciated.
  
  Best regards
  Sophie

  Hi Sophia,

  Take a look on: [http://apex.oracle.com/pls/otn/f?p=27169:4]

  This is a report from pivot for standard and interactive reports and explains how to create report data and generate results.

  As you have seen, the complicated bit is the headers and masking the unused columns. For the version of the IR, the titles are stored in the hidden page items and the column headings are defined as & P5_HEADING1, & P5_HEADING2. etc. The columns are hidden by checking another hidden element which holds a number of columns.

  You may not use directly for your own needs for IR, but if all goes well, it should give you an idea of what you could do.

  Andy

• Do we not have option to deselect ascendant and descendant of the options in interactive reports 4.2

  Hi all

  I've created an interactive report in my application and the required headers, I had used options for sorting as shown below

  

  Option selected now ranking ascending or descending sort, then report will appear as

  

  But the small icon will be kept in the report, or we can choose alphabetical, have we not option Select United Nations this option so that the option will not appear in the header part.

  Version 4.2 of the apex

  Theme-Light blue-100

  Kind regards

  Sruthitamiri.

  Sruthi Tamiri wrote:

  I've created an interactive report in my application and the required headers, I had used options for sorting as shown below

  

  Option selected now ranking ascending or descending sort, then report will appear as

  

  But the small icon will be kept in the report, or we can choose alphabetical, have we not option Select United Nations this option so that the option will not appear in the header part.

  The option is in the Actions of IR menu. Go to Actions > Format > sorting and deselect the current sort columns by setting - Select the column - column .

• How it is possible to create the chekbox in interactive report column header and select all the features.

  Hello

  My requirement is

  Interactive report the first element of box check columns and the topic also point check box.

  If I click on the element of box section columns and then automatically select all the lines in the box.

  Select all / deselect all interactive report header check box.

  Kind regards

  Arianne.

  Check this box

  https://Apex.Oracle.com/pls/Apex/f?p=76604:2:111027941779152:

  username:-test

  password:-test

  SELECT

  APEX_ITEM. HIDDEN (2, null, null, 'f02_': rownum) |

  APEX_ITEM. CHECKBOX2 (P_IDX-ONLINE 01,

  P_VALUE-online null,

  P_ATTRIBUTES-online null,

  P_CHECKED_VALUES => NULL,

  P_CHECKED_VALUES_DELIMITER => ':',

  P_ITEM_ID-online 'f01_ ' | ROWNUM,

  P_ITEM_LABEL => ' label for f01_ #ROWNUM # ')

  as Delete1,.

  of the double

  Choose the column type: report

  in the heading of column delete1

  Simply put