BIA796 is possible on the MS SQL Server?

Similar Questions

• Installation of the Microsoft SQL Server 2005 Express Edition (KB955706) code error 0x2B2F

  I am trying to install an update on a desktop HP for Microsoft SQL Server 2005 Express Edition (KB955706).  It has downloaded everything and still not settle.  It gives the error code is 0x2B2F.  I searched this error on the microsoft website and nothing came.  Any help would be appreciated.

  Hello nesbitzero,

  Thank you for using Microsoft Windows forum.

  You receive the 0x2b2f error code when you use the web sites, Windows Update or Microsoft Update to install SQL Server 2005 Service Pack 3 on a computer with MSXML6 Service Pack 2 is already installed.
   
  Follow this link for the reasons: http://support.microsoft.com/kb/970674

  You must first try and reset Windows Update components to eliminate the
  KB955706 update for SQL server.

  Follow the link for what has a fixit: http://support.microsoft.com/kb/971058

  After reset, try to install it once more to check if the problem persists.

  If this is the case, install the update mode safe

  Follow the steps below to start in safe mode with networking:

  1. reboot your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.
  2. Select networking in Mode safe mode when the Windows Advanced Options menu is displayed and press ENTER

  In Safe Mode, download and install the stand-alone package for the Microsoft SQL Server 2005 Service Pack 3 on the site: https://www.microsoft.com/downloads/details.aspx?FamilyID=ae7387c3-348c-4faa-8ae5-949fdfbe59c4&displaylang=e

  Note: It is recommended that you temporarily disable the antivirus before installing the update.
   
  Follow the steps in the link below for "SQL Server 2005 Setup fails when MSXML Core Services 6.0 Service Pack 2 has been installed"
  http://support.Microsoft.com/kb/968749

  See: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/e78198b7-324f-4775-85bd-83ce5af4affc for the exact number.

  For more information, see: http://social.msdn.microsoft.com/Forums/en-US/category/sqlserver/

  Kind regards
  Aziz Nadeem - Microsoft Support

• Failure of the Services of metadata for the sine qua non check to the RCU - SQL SERVER 2008

  Hello

  I tried installing BI Publisher using DB in Microsoft SQL Server 2008. I already did with ORACLE DB and it went fine and smooth. But with this SQL SERVER 2008, I always face an error in when during the audit requirements in RCU. ' 'Metadata' Services ' failed. I don't know what is needed to overcome this problem and the error.

  Can experts help me with this RCU configuration in SQL SERVER 2008.

  Thanks and greetings

  Hello

  The problem here is that you try to use your database of P6 - which has a ranking of CI_AS (case insensitive accents)

  You must create a separate database and not use your P6 for BI Publisher database (actually it is simple is not possible that the BI Publisher database requires accents case-sensitive)

  When you create the new database in SQL Server, you can choose the ranking (go with the Latin 1, general CS_AS)

  While we also, you will need to set the read_committed_snapshot otherwise you will get just in another problem.

  After creating the BI Publisher database in SQL Server and set the correct classification, run the following query

  change the value read_committed_snapshot database on

  Do you think that the very next step before anything else touching the BI Publisher databases as otherwise there will be problems from the read_committed_snapshot because it requires no other access to the database (if the query takes more than 15 seconds, remove the database and start over).

  Concerning

  Alex

• Problem with the microsoft SQL server installation 2016

  When I'm tryig to install MICROSOFT SQL SERVER MANAGEMENT STUDIO 2016 his watch an error like

  [8:21 TO 8 19(D)] [2015 12-14 T 13: 46:06] e000: MainViewModel.OnBundleAction: Bundle action failed

  What to do to solve this problem. ?

  Hello

  Your question is beyond the scope of this community.

  Please repost your question in the SQL Server TechNet Forums.

  https://social.technet.Microsoft.com/forums/SQLServer/en-us/home?category=SQLServer

  See you soon.

• How do I access the Microsoft SQL Server ODBC in Matlab?

  I built a Microsoft SQL Server ODBC data source and tries to connect to the data source Explorer database in Matlab, however, I got this: length of string or buffer invalid [Microsoft] [ODBC Driver Manager].

  

  Anyone know where is the bug?

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Question: insertion of several lines in the MS Sql Server table using the DB adapter

  Hi all

  I managed to insert a single row in a table of MS SQL Server via the adapter DB to my process BPEL, but when I tried to insert in mutiple lines in the same table of MS SQL server, I encounter the error below.

  I use a DB SQL XA connection to connect to the server.

  Kindly help me to solve the problem. Thanks in advance.

  Error:

  " < bpelFault > < faultType > 0 < / faultType > < remoteFault xmlns =" http://schemas.Oracle.com/BPEL/extension "> < a name ="summary"part > < summary > exemption is is produced when the binding was used." Exception occurred during invocation of the JCA binding: "JCA binding run 'merge' reference operations have to: DBWriteInteractionSpec Execute Failed Exception." the merger failed. The descriptor name: [LoadCmpAggSpendStage.SapTable]. Caused by com.microsoft.sqlserver.jdbc.SQLServerException: incorrect syntax near ')'... Check the logs for the record output full DBAdapter before this exception. This exception is considered as reproducible, probably due to a communication failure. To be classified as not reproducible rather add property nonRetriableErrorCodes with the '102' value in the deployment descriptor (i.e. weblogic - RA.Xml). Auto retry a reproducible fault set composite.xml for this invoke these properties: jca.retry.interval, jca.retry.count and jca.retry.backoff. All properties are integers. ". The called JCA adapter threw an exception of resource. Please examine the error message above carefully to determine a resolution. < /Summary. (> < / piece > < part name = "detail" > < detail syntax > incorrect near ')'. < / details > < / piece > < part name = "code" > < code > 102 < / code > < / piece > < / remoteFault > < / bpelFault >

  Kind regards

  Balaji Rahmani

  It seems that in this case is called merge operation. If existing records (check primary key) are not there then it will be inserted on the other update. Check the syntax of the query that is created. It looks like she may have a supplement "). If you want to only insert then call insert operation and not merge.

• Comparing the data set of Oracle database local to the Remote SQL Server database

  Hello

  I have a table in an Oracle database that is gradually being updated with a table in SQL server through the database link. There is a field "Date of creation" in the table in SQL server that I used to find the newly created records and shoot and insert them into the local table to the Oracle database.

  Now the question is the documents/data in the SQL server remote can be deleted as well and I see a lot of files are already deleted and I couldn't find a way to capture the information of deleted data to remove from my local table.

  I tried

  SELECT id local_table

  where there is no

  (select * (or 1))

  of remote_table@database_link

  where remote_table.id = local_table.id).

  And I tried to replace not exist with no so.

  The problem is that the query is too slow with link of database for IN/NOT EXISTS clause NO. So, I'm trying to find an effective way to capture the lines deleted in the remote to remove as a result of my local table table.

  Any help is appreciated.

  Oracle Database 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit

  Thank you

  Chrystelle

  It is perhaps easier

  Select pk / * or sustitutive key * / from Oracle.tba

  less

  Select pk / * or sustitutive key * / from SQLSERVER.tab

  This returns the rows that exist in Oracle but not in SQL SERVER-> delteted lines in SQL Server.

  Another way is to create a trigger to remove in sqlserver and track in a table delete lines.

  HTH - Antonio NAVARRO

  http://SQL1.WordPress.com/

• Move the vCenters SQL Server to different hardware

  I have two clusters.  An AMD and another is Intel.  We are trying to remove the blades from AMD, but I get to a point where I must pass the SQL VM that hosts the vCenter DB.

  How would I be able to do it from vcenter will be down, because SQL server needs to be powered off to move from AMD to Intel? I guess I have to remove the inventory then just connect to a host of Intel directly and re - add inventory?

  A better way?

  .... I guess I have to remove the inventory then just connect to a host of Intel directly and re - add inventory?

  This is probably the simplest and fastest approach

• Connect the MS SQL Server database

  I need to connect my MS SQL server back-end database.

  I would like to know what I can login to u string to connect to the server or I now have code to connect the database.

  < NAME = "CFPARAM Application.DS" DEFAULT = "MyDB" > "

  < NAME = "Application.UserName CFPARAM" DEFAULT = "MyUser" > "

  < NAME = "CFPARAM Application.Password" DEFAULT = "MonMotpasse" > "

  Your information and help is much appreciated,

  Kind regards

  Iccsi

  Yes, I just installed Dreamweaver CS 6 and will use the ColdFusion web server.

  Thanks again for the information and help.

  Kind regards

  Iccsi

• Get the last inserted into the table, SQL Server Uniqueidentifier

  I'm looking for the code that will make me the last ID entered in a table.  I am using SQL Server and have the ID defined as uniqueidentifiers.  I tried SCOPE_IDENTITY() and had a problem.  I also want to make sure that it is for this unique insert, not an insert that has crept into almost at the same time.

  Thank you!

  NCC

  I'm looking for the code that will make me the last ID entered in a table.  I am using SQL Server and have the ID defined as uniqueidentifiers.  I tried SCOPE_IDENTITY() and had a problem.  I also want to make sure that it is for this unique insert, not an insert that has crept into almost at the same time.

  SCOPE_IDENTITY() only works with identity columns.  If your table does not identity column, it will be of no use to you. Neither will 'result' of cfquery attribute such that it only works with ms sql identity values too.

  As far as I KNOW, there is no method integrated to automatically return a newly created uniqueidentifier.  The closest you can get in MS SQL 2005, without involving triggers, use an OUTPUT clause.

  SET NOCOUNT ON
  INSERT INTO yourTable (ColumnA, ColumnB)
  OUTPUT inserted.yourIDColumn
  VALUES ('foo', 'bar')

  SET NOCOUNT OFF

  Post edited by: == cfSearching == -.

• How to fill a spry menu by using the microsoft sql server database?

  Hello

  I use dreamweaver cs4 and spry menu to create a dynamically created menu system.

  My concept is to fill the menu items on the fly using MS sql server as database technology.

  Can someone point me in the right direction? I googled and searched, but can't seem to get anywhere.

  As soon as I get my menu established, I would like to this style. It seems that a lot of work for each element of style by hand. I was wondering if there was a collection of css files menu spry somewhere that I could just tie and presto!

  Thank you.

  Jerry

  I use dreamweaver cs4 and spry menu to create a dynamically created menu system. My concept is to fill the menu items on the fly using MS sql server as database technology.

  Basically

  1. create a dynamic XML files containing data from the database
  2. create a SpryXMLDataSet
  3. create a SpryRegion when the menu is displayed
  4. using SpryRepeat fill the menu

  More information can be found here http://labs.adobe.com/technologies/spry/samples/

  As soon as I get my menu established, I would like to this style. It seems that a lot of work for each element of style by hand. I was wondering if there was a collection of css files menu spry somewhere that I could just tie and presto!

  Have a look here http://www.adobe.com/cfusion/exchange/index.cfm?event=extensionDetail&extid=2141544

  If you need additional Spry associated support go to http://forums.adobe.com/community/labs/spry

• Is is possible to the PL/SQL call ODI scenario

  Hi all

  Can we call PL/SQL procedures in ODI, I would like to know if you can call the ODI in PL/SQL scenarios.  If so, can someone explain to me how this is possible.

  Thanks in advance

  Your plan will look like - it's the infinite loop as long as certain conditions (CHECK at the END)

  

  This package you must start manually.

  Then you can start scenarios insertion of records in the table (which controls OdiWaitForData)

  Each insert starts the script in OdiStartScen

  You can pass the name of the scenario by REFRESH VARIABLE (GET the SETTINGS in this example)
  

• Impossible to apply the update of security MS15-058 on sql server 2008 R2 SP3

  Hi team,

  Here's my situation: and ask for your help as soon as possible

  ServerName MajorVersion MinorVersion version complete edition
  XXXXX 2008 SP3 Enterprise Edition (64-bit) 10.50.6000.34

  I'm not able to install the update of MS15-058 security on my server and it throws me error below.

  SSMS, it's showing as 10.50.6000, but isn't actually to SP2 (10.50.4000) only of SP3.

  Please tell me the resolution.

  The version of SQL Server's MSSQLSERVER instance does not match the version expected by the update to SQL Server. The installed version of the SQL Server product is 10.52.4000.0, and the expected SQL Server version is 10.53.6000.34. *.

  Only shared feautures are getting updated to MS15-058, which is 10.50.6220.34.

  But the SQL Server database engine and other services are not getting updates and please help us its been 3 days we suffer with him.

  We tried to uninstall SP3, SP2 later none is uninstall properly and seems to service pack SP3 to SQL server 2008R2 in our machine is broken. Kindly help us resolution as soon as possible.

  SLP: VstaRedistWithLangPack_Cpu32_1049 Package ID: NotInstalled
  2015-11-06 05:59:24 Slp: VstaRedistWithLangPack_Cpu32_2052 Package ID: NotInstalled
  2015-11-06 05:59:24 Slp: VstaRedistWithLangPack_Cpu32_3082 Package ID: NotInstalled
  2015-11-06 05:59:24 Slp: VstaRedistWithLangPack_Cpu32_1053 Package ID: NotInstalled
  2015-11-06 05:59:24 Slp: VS_Shell_Cpu32 ID of Package: installation - Version: 9.0.30729
  2015-11-06 05:59:24 Slp: msreportviewer90sp1_Cpu32 ID of Package: installation - Version: 9.0.30731
  2015-11-06 05:59:24 Slp: msreportviewer90sp1_langpack_Cpu32_1028 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: msreportviewer90sp1_langpack_Cpu32_1031 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: msreportviewer90sp1_langpack_Cpu32_1033 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: msreportviewer90sp1_langpack_Cpu32_1036 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: msreportviewer90sp1_langpack_Cpu32_1040 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: msreportviewer90sp1_langpack_Cpu32_1041 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: msreportviewer90sp1_langpack_Cpu32_1042 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: msreportviewer90sp1_langpack_Cpu32_1046 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: msreportviewer90sp1_langpack_Cpu32_1049 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: msreportviewer90sp1_langpack_Cpu32_2052 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: msreportviewer90sp1_langpack_Cpu32_3082 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: msreportviewer90sp1_langpack_Cpu32_1053 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: sql_engine_core_inst_loc_ctp6_Cpu64_1028 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: sql_engine_core_inst_loc_ctp6_Cpu64_1031 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: sql_engine_core_inst_loc_ctp6_Cpu64_1033 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: sql_engine_core_inst_loc_ctp6_Cpu64_1036 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: sql_engine_core_inst_loc_ctp6_Cpu64_1040 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: sql_engine_core_inst_loc_ctp6_Cpu64_1041 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: sql_engine_core_inst_loc_ctp6_Cpu64_1042 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: sql_engine_core_inst_loc_ctp6_Cpu64_1046 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: sql_engine_core_inst_loc_ctp6_Cpu64_1049 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: sql_engine_core_inst_loc_ctp6_Cpu64_2052 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: sql_engine_core_inst_loc_ctp6_Cpu64_3082 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: sql_engine_core_inst_loc_ctp6_Cpu64_1053 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: sql_fulltext_ctp6_Cpu64 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: sql_engine_core_inst_ctp6_Cpu64 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: sql_engine_core_inst_ctp6_AnyInstance_Cpu64 ID of Package: MSI: Package version data are "" Version Installed: MinVersion 10.52.4000.0: 10.0.1400 MaxVersion: 10.50.1599.1 ""
  2015-11-06 05:59:24 Slp: sql_engine_core_inst_ctp6_AnyInstance_Cpu64 ID of Package: match result for MSI - Version: false, Cpu: True, language: true
  2015-11-06 05:59:24 Slp: sql_engine_core_inst_ctp6_AnyInstance_Cpu64 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: sql_as_loc_ctp6_Cpu64_1028 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: sql_as_loc_ctp6_Cpu64_1031 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: sql_as_loc_ctp6_Cpu64_1033 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: sql_as_loc_ctp6_Cpu64_1036 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: sql_as_loc_ctp6_Cpu64_1040 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: sql_as_loc_ctp6_Cpu64_1041 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: sql_as_loc_ctp6_Cpu64_1042 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: sql_as_loc_ctp6_Cpu64_1046 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: sql_as_loc_ctp6_Cpu64_1049 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: sql_as_loc_ctp6_Cpu64_2052 ID of Package: NotInstalled
  2015-11-06 05:59:24 Slp: sql_as_loc_ctp6_Cpu64_3082 ID of Package: NotInstalled

  Thank you

  Vijay

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  Or in SQL Server TechNet Forums.

  https://social.technet.Microsoft.com/forums/SQLServer/en-us/home?category=SQLServer

  See you soon.

• Dblink Oracle to sql server, multiple database on the same server sql under a dblink

  Hi, we managed to set up an Oracle dblink to sql server and retrieve data.

  The user of sql server have been using via dblink has access to multiple databases on the same sql server

  But the question is how in oracle (if possible) prepend you the SQL access to this?

  For example:

  Sqlserver_prod has the user sqlserver_user which seems to be set up as default database sqlserver_db1

  But we have select access to sqlserver_db2

  all work well as sqlserver_user

  Select * from table_fromdb1

  Select * from dbo.table_fromdb1

  Select * from sqlserver_db1.dbo.table_fromdb1

  as does

  Select * from sqlserver_db2.dbo.table_fromdb2

  more in Oracle

  Oracle_db a dblink sqlserver_prod. World connection sqlserver_user

  everything works fine

  Select * from 'table_fromdb1"@sqlserver_prod '.

  Select * from 'dbo '. "table_fromdb1"@sqlserver_prod

  But how to (if possible) access from oracle

  sqlserver_db2.dbo.table_fromdb2

  without having to create a new sqlserver_db2_user referenced in a new dblink

  If oracle for oracle would be

  Select * from remote_oracle_schema.table@remote_oracle_db

  Hello

  You cannot select a table in a different SQL * database server from that to which the gateway instance connects.
  As stated in the documentation-

  Oracle® database gateway

  Installation and Configuration Guide

  11g Release 2 (11.2) for AIX 5 L Based Systems (64-bit), HP - UX

  Itanium, Solaris (SPARC 64-Bit), Linux x 86 operating system,

  and Linux x 86-64

  In the section.

  The example SQL Server multiple databases: Configuration of the modem router

  A separate instance of the gateway that is required for each SQL Server database. Each

  instance needs its own Gateway system ID (SID).

  ==========

  You will need to create a new instance of the gateway for the SQL * Server DB2 as well as a link separate db.

  Kind regards

  Mike

• How to completely remove the SQL Server 2008 R2 from my system?

  I got the SQL Server loaded on my computer before I realized it was the express edition that I needed. When I tried to load the version I needed the computer said that I had to create a new instance for the second version to run simultaneously. (had already uninstalled the original SQL Server and did not not the problem.) I went through the steps again and somehow there is the menu server must remove files, but they can access it. The only solution I see at the moment is to reload the server and uninstall and I hope that everything that caused its not completely withdraw from my system is corrected. Please tell me there is another solution which has guaranteed results.

  Hi Avendia,

  Your question would be better asked on the SQL Server forum

  SQL Server Forum
  http://social.msdn.Microsoft.com/forums/en-us/category/SQLServer