biacm, console and em crashes when workload is generated using biacm 11.1.1.8.1

Similar Questions

• Visualizations and frizes crashes when I try to use the WhiteCap in Windows Media Player

  Windows Media Player stops working after a few minutes of course using visualization WhiteCap, what should I do to fix this problem?

  Hi ISROBI. R.,.

  1. the problem occurs only with screen saver and visualizer whitecap?
  
  Method 1
  I suggest you perform the clean boot and check if the problem persists. The following link will help you perform the clean boot.
  
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: follow step 7 of section of boot KB929135 to the computer in normal mode.

  
  Method 2
  I suggest that you uninstall visualize whitecap and see if you are able to use windows media player. If you are able to use the media player without freezing then the problem is with plug-in and you must contact the plug-in manufacturer.

• How can I fix my Lightroom 6? It starts and then crashes when I try to delete a photo from a collection or edit a photo.

  How can I fix my Lightroom 6? It starts and then crashes when I try to delete a photo from a collection or edit a photo.

  Go to the dialog box Preferences, Performance tab and disable the GPU acceleration. See if that helps.

• Illustrator and photoshop crashing when opening

  Since the last update - every time I move my home - Illustrator and Photoshop crash when opening - Office it is very capricious and driving me crazy!

  I tried out singing and back again - but does not

  can anyone help?

  Hi Eryl,

  Please see the link below:

  Photoshop CC 2015 release: FAQ

  You can also see the thread below:

  New installation of Photoshop CC (2015) crashes when opened

  Kind regards

  Sheena

• Firefox crashes when the flash is used.

  Firefox crashes when the flash is used at all.
  I've checked everything and it is only with flash 10.1.53.64 on the tree

  == a site using flash is open

  I use Windows 7 and I have the same problem. When I went to 3.6.4, Firefox would be to lock up whenever I tried to play any flash video. I have tried several sites and it would lock up every time I have to close by the Task Manager. I've updated the Flash Player and even tried uninstalling and reinstalling, nothing could solve this problem.

  I read that they supposedly separated the plugins like flash in a separate procedure to keep firefox crash if flash does, but apparently they didn't do this right. I had to go back to Firefox 3.6.3 worm and flash works without any problem in this version. Seems that firefox must correct 3.6.4 since it seems he's messed up video flash for many users, if not most. It is useless if it can't play flash since almost all Web sites use this format!

• my laptop displays windows is installed and activated but when I go to use powerpoint, he asks a validation of key that when I get home he tells me is not valid

  my laptop displays windows is installed and activated but when I go to use powerpoint, he asks a validation of key that when I get home he tells me is not valid

  Please note that if you use the Windows 7 product key located on the certificate of authenticity attached to your system label, this will not work, it is only for Windows 7. You need a product key Office 2010.

  If your computer comes with a trial version of Office, you need to get a trial key or buy a full license:

  Trial license:

  http://Office.Microsoft.com/en-us/try/

  Full license:

  http://support.Microsoft.com/kb/823570

  Get the key;

  http://Office.Microsoft.com/en-us/buy/redir/XT101874326.aspx?CTT=5&origin=HA101847520

  If you purchased Office 2010 and get no valid product key error to refer the article mentioned below:

  http://support.Microsoft.com/kb/2002262

  Frequently asked questions about Office Activation Wizard and about features in Office 2010 and Office 2007 programs view programs

  http://support.Microsoft.com/kb/927921

  Error message when you start an Office application after installing a suite Office: "invalid product key".

  http://support.Microsoft.com/kb/836178

  If you have a trial version of Office 2010 that came with your computer, try to uninstall it first:

  Run the patch tool mentioned in the article below to uninstall Office 2010:

  http://support.Microsoft.com/kb/290301

  Download a trial version of Office 2010 that corresponds with the edition that you purchased and convert it to a version full:

  Trial license:

  http://Office.Microsoft.com/en-us/try/

  See the link on how to convert a trial version of a suite full Office 2010 or program to a commercial version: -.

  http://Office.Microsoft.com/en-us/project-help/convert-a-trial-version-of-an-Office-2010-suite-or-program-to-a-full-retail-version-HA101886436.aspx

  http://Office.Microsoft.com/en-us/buy/convert-your-trial-to-a-full-product-version-HA101812668.aspx?CTT=1

• Why LR 6 on my mac unexpectedly and repeatedly crash when I scroll my images or change?

  Why LR 6 on my mac unexpectedly and repeatedly crash them? This happens when I view my images after importation and in the middle of changing them.

  First of all make sure that you use Lightroom 6.5 (if you have 6.5 then update your Lightroom through keeping updated in Lightroom)

  Try to disable the use of the graphics processor

  Go to Preferences, click the performance tab, and then clear the check box

• With the help of Photoshop CS6 on Yosemite with a Cintiqt and get crashes when I go to save. A way to solve this problem? Only the updates seem to come from CC and I am the last of people loading discs.

  Well, my last computer was destroyed when the son of a friend seeps water so I am rocking a brand new Macbook Pro. Unfortunately, this means that I have to use Yosemite. I am a cartoonist and I draw in Photoshop using a Cintiq. I indeed get bugs like not being able to use some keyboard shortcuts, or by using the zoom or the lasso. But the important thing is that Photoshop crashes when I go to save the work for the first time. No idea how to solve this problem?

  Install the MacOS 10.10.1 update to fix the crash bugs generalized in the open and save dialog boxes.

  And make sure you have the plugin WhiteWindowWorkaround installed in CS6 (no not necessary in 2014 CC) to work around some of the well-known MacOS issues.

• Firefox crashes when I try to use then printer

  I did not really see a response to my question, looking at the previous Q & A. So I'll try here. Just from today, every time I try to use my printer with firefox, I get a crash report? When I try to use the printer in another browser, no problem. I tried several times today, to use the printer in firefox, nothing helps. Yet once, each time, I get a crash report. Can anyone help? Yet once again, this was never a problem before with my printer and firefox. Appreciate any help. Thank you.

  Rick

  It's a problem with the Flash plugin.

  You can check the problems caused by a recent update of Flash 11.3 and possibly upgrade to Flash 11.2 or 10.3.

  • https://support.Mozilla.org/KB/Flash-113-doesn ' t-charge-video-firefox
  • https://support.Mozilla.org/KB/Flash-113-crashes
  • http://blogs.Adobe.com/asset/2012/06/inside-Flash-Player-protected-mode-for-Firefox.html

• InDesign CS3 crashes when trying to print using OS x 10.7 Lion

  Since the installation of Lion, passing of snow leopard, InDesign does not print, but crashes when you try to get the print dialog box. I can print by generating the PDF of the document, and then print from Acrobat 8.3.0. It of a workaround, but what should I do to be able to print from InDesign, the use of Lion, for my EPSON WorkForce 635 printer now.

  Everything worked fine in Snow Leopard, but I don't want to go back to an older OS now.

  Ken

  I found this form of solution Michael Wiwerka. It works!

  Kind regards

  Kabeljauws (Laurent Spierings)

  on Adobe forum and IT MARKET, my InDesign CS3 and Illustrator CS4, two silencers during printing (with OS X 10.7 Lion). This correction is no problem, but has really solved my printing problems.

  To avoid this accident try this workaround.

  -------

  Adobe PDF PPD delete the following folders:

  OS/Library/Printers/PPDs/contents/Resources/en.lproj,

  OS/Library/Printers/PPDs/contents/Resources/Zh_CN.lproj,

  OS/Library/Printers/PPDs/contents/Resources/Ja.lproj,

  OS/Library/Printers/PPDs/contents/Resources/ko.lproj,

  OS/Library/Printers/PPDs/contents/Resources/Zh_TW.lproj,

• 2072 AND 2126 ERROR when you try to use the printer

  ERROR 2072 AND 2126 WHEN YOU TRY TO USE THE PRINTER?

  Hello

  1. What is the brand and model of the printer?

  2. What is the exact error message you get?

  3 when was the last time you were able to use the printer?

  4 did you a recent software or changes to the material on the computer?

  Method 1:

  I suggest you to go through the steps mentioned in the link and the Coachman.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  If the issue does not get resolved, then you can move on to method 2.

  Method 2:

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  Hope this helps and keep us informed if you need help.

• After Effects CS6 crashes when you try to use the Preferences submenu

  I have a problem with AE "freeze" or lock in place when you try to use under preferences submenu items. I have to stop with the Task Manager to regain control. I have a PC wintel with 8 GB RAM and 2 TB of disk and a quad-core, do not think that any of those who are a problem. AE is the only child of problem in this entire suite. Any help/advice is greatly appreciated. Thank you in advance for your time and effort.

  Sincerely,

  Vidmist

  1360 x 768.

  That does not meet the system requirements and I think it's safe to say thatr it is the reason for the accident - the program seeks to draw the preferences panel in an invalid area because it cannot properly address the resolution of the screen too small. Increase the screen resolution and everything will probably work.

  Mylenium

• RoboHelp 8 crashes when you try to use an open dialog box

  The title says pretty much all this. RoboHelp freezes when I try to use Open... of the start screen or file > open or any other control that accesses the dialog box open (i.e., open/Explorer button on the settings tab of content in the settings of FrameMaker Document dialog box). I have to finish the process in the Task Manager, and then restart RoboHelp. (Fortunately, the recent projects links work - except to open them..., of course.)

  I discovered this when I had to restore links to displaced FrameMaker documents. My installation is TCS2 running Windows 7 32-bit; all all components TCS2 and Windows 7 updates have been installed.

  I tried a Reinstall RoboHelp on-site, but that made no difference.

  Any ideas?

  Thank you

  John

  Maybe that something went crazy and he thinks that you have several screens, and open your dialogs out of the screen?

  Select file > open, and then do the following:

  Press Alt + space + M, then an arrow key.

  Waggle, the mouse wildly until the dialog box is displayed on the screen, then left click on the mouse to drag where you want.

  (I assume that it will continue to operate under Windows 7, but don't have this version to try it).

  If you encounter any problems with your dialog boxes, I think that you would have access to each dialog box and repeat to get them all in the right place. Even if I remember something about a registry hack - I don't know if that affects all the boxes of dialogue or just a / a. I think it's Rick who posted originally, so it could hold and be able to answer this question.

  Amebr

• Pages and Numbers crash when print drivers Toshiba

  In my office, I have a black and White Copier 857 of Toshiba e-studio and a Toshiba 4555C color copier, who never gave me problems printing on the network from a PC or Mac before El Capitan. Since he joined some of the Mac (some MacBooks, some iMacs, liberation of the years from 2011 to 2015) to El Capitan (all versions up to and including 10.11.4), I met a strange behavior when you try to change printers in Pages or in number on all of these Macs (no problems with the PC, regardless of the version of Windows). The exact location is:

  -Open the Pages or numbers and starts with an existing document or a new document

  -Bring up the print dialog box

  -Change the printer active 857 c 4555 or vice versa

  -Pages/numbers instantly crashes with the following error report (I don't publish the complete stack trace unless someone finds it useful):

  Crashed thread: 0 dispatch queue: com.apple.main - wire

  Exception type: EXC_BAD_INSTRUCTION (SIGILL)

  Exception codes: 0000000000000001 0 x, 0 x 0000000000000000

  Note the exception: EXC_CORPSE_NOTIFY

  Request for clarification:

  Crashing on the exception:-[NSMenuItem supportedPPDOptionKeys]: unrecognized selector sent to instance 0x7ffa04cbe8d0

  Note that this happens only (so far in my tests) in Pages, Numbers and curiously, Google Chrome (but only if you use the dialog box print system). It does not occur in Keynote, Safari, TextEdit, or all the productivity applications from Microsoft, nor when printing test pages from the printers and scanners preferences window. It also does not occur when moving from one of the problems Toshibas completely different printers (HPs, brothers, Epsons), or vice versa - only between the Toshibas. I tried:

  -Delete the printer preferences

  -Configuration of the drivers of Toshiba to "pretend", that printers are different models

  -With the help of Hello, PPI or LPR to connect

  -Remove all equations in partial derivatives of Toshiba and SDPP/library and re - install the drivers from scratch

  -New and old drivers Toshiba

  -Ensure, Pages and Numbers are the latest versions: 5.6.1 (2562) and 3.6.1 (2566) respectively

  -Various updates of El Capitan

  -New installation of El Capitan

  No luck. Same behavior, no matter what machine or El Capitan version I try on. Unfortunately, I don't have other models Toshiba to test. I would be recognizing all thought - I understand that the answer could end up being 'complain to Toshiba of their pilots', but I thought it was worth a try here first. Thank you!

  I would say that you are looking for in a bug report. A all Pages, a copy of the numbers.

  In each, open the app, go to the menu of the application (Pages or numbers) and choose to produce (application name) return. Use the bug report category and give a detailed description of how to reproduce the results you've met. Repeat for other affected applications.

  Kind regards

  Barry

• Applications and programs crash when open file Explorer

  My programs and applications are blocking as soon as I open Explorer file (I use windows 8).  For example, when I go to attach a file to an e-mail, the Web browser crashes.  Also, when I go on ' Save as ' in microsoft office, word/excel crashes too.

  So far, I have:

  -Updated and rebooted

  -virus research (clear)

  -Startup in safe mode - safe mode will not allow not even me open microsoft word, and the problem persists when you use gmail via google chrome

  -re-installed office - no change

  What could I do next?  The computer was perfect up to this problem that began a couple of weeks.

  Help, please!

  Thank you

  Cara

  Hello Cara,

  Thanks for posting your query in Microsoft Community.

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  1. You did changes to the computer before this problem?
  2. You get an error message when the applications or programs crash?

  The question could arise due to corruption in specific applications or due to file system corruption directly affecting the launch programs. In order to diagnose and resolve the issue, I would suggest trying the following methods and check if the problem persists.

  Method 1:

  Run the Troubleshooter of Apps and check if that helps.

  The Apps store is an automated tool that we have developed to deal with a number of known issues that may prevent applications from running correctly. This troubleshooting automatically solves some issues including the suboptimal screen resolution, incorrect security or account etc. settings. If the problem persists, refer to the remaining steps in the help article and check.

  Solve problems with a soft

  If the problem persists, try the following method.

  Method 2:

  Try to run a scan of the file system (CFS) auditor to check corruption of system files in the system. SFC scan will search for system files corrupted on the computer and fix them.

  1. Press the Windows key + X, click prompt (Admin).
  2. In the command prompt, type the following command and press ENTER:
     sfc/scannow

  For more information, refer to this link:

  Use the System File Checker tool to repair missing or corrupted system files

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.