Big increase in size of the backups after upgrade

Similar Questions

• As a Time Machine backup, it keeps adding to the size of the backup?

  TM starts the backup and starts suddenly to add to the size of the backup, it will do. This means that no player will never be large enough to accommodate the backup because it keeps growing in size (as each block of data is added, the size of the backup continues expansion of the same amount). I have attached 2 screenshots showing what has happened in the minute to restart the backup. TM is backup on an external WD hard drive via the USB-3 port on my MacBook Pro (retina, 15 inches, end of 2013). 1.9 TB of data backup - there should not be a problem because the external hard drive has 3 TB of space and has been freshly formatted before being used for the first backup on this drive. As you can see from the screenshots, the backup is much larger than it should be.

  

  1 minute later screenshot:

  

  Before this behavior, I have had problems with Time Machine while using another backup drive (a drive LaCie Quadra) with for example, ignored backups, backups landed at calculation time, backups, partially blocked by a backup for more than 36 hours etc., error messages from read-only TM etc... I tried several solutions on this forum and none seem to have corrected these strange behaviors. It felt like I've solved a problem, shortly after another was about to begin.

  I stopped finally try the solutions suggested here in the forums, as well as some external sites such as Pondini and chose to use another drive (HD freshly cleared using disk utility - the WD drive that is currently attached to the MBP). The WD external drive worked well on the Mac Pro in the office, and I have no reason to suspect that this is the problem (I ran some tests after erasing it and there is no error reported).

  Well, the first symptom that something still was wrong was when backing up to disk WD has slowed to a crawl yesterday afternoon, but I left it on overnight. At noon today the backup was still running, but about ⅔ complete (very, very slowly - running data blocks are moving into very small pieces), but I have to bring the MBP to a meeting and everything stop. Then my back and everything by plugging, TM started upward and all seemed well, until I noticed that the backup data was almost 2.5 to. I restarted the MBP. It's once again, I noticed that Time Machine did not work as I expected. The size of the backup continues to expand... I was expecting TM that she had about 250 GB left to save, but as see you from the screenshots it much much smaller than that. I have let it run like that for about 2 hours, hoping that it was just a small mistake, but the HD continues to fill, only 185 GB of space left. Strangely, I can enter TM and see my data.

  Suggestions please? Very much appreciated.

  Stu

  Nobody answered, so I thought I'd share the temporary solution I came up with.

  I started in safe mode, deleted the backup external TM drive I was using and launched a full backup with TM (always in safe mode). I leave TM turn all night and a full backup has been completed. I rebooted, entered TM and restore some files to confirm that I was actually able to restore the backup pieces. Since that time, I did have problems with TM make scheduled backups, with one reading errors etc.

  I will continue to spend some time to know what triggered these questions... since I was able to make a backup in safe mode, this means that I have other avenues to explore.

  I will report back if I find anything.

  Stu

• How to know the size of the backup through POS image

  Hello

  After you have configured vShpere Protection data, I run successfully backup jobs, but I can't find details on employment, the size of the backup image.

  is it possible to get it?

  I think that with the POS, it is pretty easy, I don't even know what the speed of the backup, backup image format, etc..

  To connect to vCenter through thick client. Select the POS device and goto tab «Tasks & Events»

  Now find the backup job id - see attachment file for reference.

  Now ssh to the POS device and run the following command. / * Don't forget to provide the id of the backup job in the command * /.

  grep-i "Logging" to/usr/local/avamarclient/var-proxy * /* vmimage?. Journal

  The command output contains the path of the log file of origin for the backup, which should contain complete information.

  Capture of the info from my log file (that you might want to watch)...

  2013-03-25 03:47:27 avvcbimage Info <9752>: Performance: 11221,9 MB/minute
  2013-03-25 03:47:27 avvcbimage Info <9753>: duration: 00:03:39 (+ 00:00:00 idle/load/preparation)
  2013-03-25 03:47:27 avvcbimage Info <9754>: VDDK IO 9229.00 MB, Performance: 5954,2 MB/minute, duration: 00:01:33
  2013-03-25 03:47:27 avvcbimage Info <9755>: Avamar deduplication entry 9229,00 MB, Performance: 4429,9 MB/minute, duration: 00:02:05

• The total size of the backup database and Total database size.

  Hi Experts,
  
  How can I find the size of the size of the database and the size of the backup with only the RMAN catalog help.
  I use Oracle 10.2.0.5. and Tivoli TSM
  
  I have

  Hello

  See this doc...
  http://download.Oracle.com/docs/CD/B28359_01/backup.111/b28270/rcmreprt.htm#CHDBIGHG

  Connect to SQL * for the database you intend to question the backup history.

  Ask the view V$ RMAN_BACKUP_JOB_DETAILS for more information on the backup type, status, and the start and end time.

  The following query shows the history of the backup jobs sorted by the session key, which is the primary key for the RMAN session:

  COL STATUS FORMAT a9
  COL hrs    FORMAT 999.99
  SELECT SESSION_KEY, INPUT_TYPE, STATUS,
         TO_CHAR(START_TIME,'mm/dd/yy hh24:mi') start_time,
         TO_CHAR(END_TIME,'mm/dd/yy hh24:mi')   end_time,
         ELAPSED_SECONDS/3600                   hrs
  FROM V$RMAN_BACKUP_JOB_DETAILS
  ORDER BY SESSION_KEY;
  

  Ask the view RMAN_BACKUP_JOB_DETAILS V$ at the rate of tasks of backup in an RMAN session.

  The following query shows the speed of backup job sorted by the session key, the primary key of the RMAN session. The in_sec and out_sec columns columns display the input data and output per second.

  COL in_sec FORMAT a10
  COL out_sec FORMAT a10
  COL TIME_TAKEN_DISPLAY FORMAT a10
  SELECT SESSION_KEY,
         OPTIMIZED,
         COMPRESSION_RATIO,
         INPUT_BYTES_PER_SEC_DISPLAY in_sec,
         OUTPUT_BYTES_PER_SEC_DISPLAY out_sec,
         TIME_TAKEN_DISPLAY
  FROM   V$RMAN_BACKUP_JOB_DETAILS
  ORDER BY SESSION_KEY;
  

  Ask the view RMAN_BACKUP_JOB_DETAILS V$ for the size of the backups in an RMAN session.

  If you run the DATABASE BACKUP, then V$ RMAN_BACKUP_JOB_DETAILS. OUTPUT_BYTES indicates the total size of backup games written by the backup task for the database that you are backing up. To view the backup set sizes for all registered databases, ask RC_RMAN_BACKUP_JOB_DETAILS.

  The following query shows the speed of backup job sorted by the session key, the primary key of the RMAN session. The in_sec and out_sec columns columns display the input data and output per second.

  COL in_size  FORMAT a10
  COL out_size FORMAT a10
  SELECT SESSION_KEY,
         INPUT_TYPE,
         COMPRESSION_RATIO,
         INPUT_BYTES_DISPLAY in_size,
         OUTPUT_BYTES_DISPLAY out_size
  FROM   V$RMAN_BACKUP_JOB_DETAILS
  ORDER BY SESSION_KEY;
  

  The following sample output shows the speed of the backup jobs:

  I hope this will help...

  Kind regards
  Levi Pereira

• Height ADJUSTMENT group to the size of the content, after having defined it explicitly

  Hello

  I have a group such as:

  < group id = "test" height = "100" >

  < button height = "200" / >

  < / Group >

  I can't group, to have the size of the content after you set the height explicitly?

  Concerning

  Martin Andersen

  You can set the height of Nan, for example:

  http://ns.Adobe.com/MXML/2009.
  xmlns:s = "library://ns.adobe.com/flex/spark" >

  
         
     

  
         
     
     
  

• Size of the backup set

  Hello
  How to choose the size of the backup set? Small or large? What would we be better? We have the archivelog 250 MB. Size of the backup set for archivelogs is 300 MB. Is it enough or we should change? The bandwidth and the number of the Chanel play a role too?
  Thank you.

  Hello

  If you are askig for your logs archiving that is only 250 MB, so you need to have several channels and don't worry abt the size of the backup set for that much archive logs,

  You must take into account the channesla when you are in large number of saved data files.

  Kind regards
  Navneet

• What happened to the flashlight after upgrade to ios10

  What happened to the flashlight after upgrading to IOS 10

  Flashlight is the control center? I swear that I saw on one of these demo phones in an Apple store.

• Problem with the mapping of the keyboard after upgrading to Fusion 7

  Hello

  I noticed that the keyboard layout has changed in the comments after the upgrade to VMware Fusion version 6 to version 7, even if nothing has changed in the settings "Region and language" in comments Windows 7.  Keys that have changed are "------' with ' < ' and ' | ' with ' > ' everything is OK. The keyboard is configured in Italian

  All the world has noticed the same problem?

  Have you solved?

  Thanks in advance.

  The problem has been resolved by the technical support of vmware with a workaround. They know that the question on the keys is interchangeable in the VM after upgrade to Fusion 7.

  Their development team is currently working on this issue on the priority. This will be fixed in the next update.

  However, they have a work around for the problem of keyboard. Following the instructions below to map the key manually in VMware Fusion.

  : Note make a note of the interchangeable keys in Windows before you enable the mapping of the keys.

  1. click on VMware Fusion-> preferences-> keyboard & mouse-> mappings of keys

  2. make sure that 'Enable key mappings' is enabled

  3. click on '+' sign at the bottom

  4. press the key that you want to send from the text box Mac keyboard

  5. press the key you want to receive on the VM in text box

  Note: You can also use the combination of change, control, Option, command if necessary.

• How can I reinstall the CS6 after upgrading Windows Vista to Windows 10?

  How can I reinstall the CS6 after upgrading Windows Vista to Windows 10?

  Hello

  You can download the Photoshop CS 6 from the below mentioned link.

  Download Creative Suite 6 applications

  Thank you

• Not able to reduce the size of the police after turning off the projector.

  I use my laptop for powerpoint presentation for the students of the University. I use a Lenovo Thinkpad SL500. However, there is no problem to connect to the projector. The last time that I disconnected the projector, the size of the font is not some up to normal. I tried to go to the option of customization and selected the smaller font. Even after a reboot, the font size is not down to normal. The next time I plugged the projector, the size of the font was normal. After disconnecting, the font size is increased further. Help, please.

  Hi MamoonSyed,

  1 - is the maximum resolution (800 × 600 pixels), your computer can get?
  2. what happens when you set a higher resolution?

  You can try to set the resolution higher than 1024 × 768 or higher and check.

• Publish with the increase in size of the readers

  Hi all

  I have a seemingly common problem, but unfortunately common solutions do not seem to apply.  I have a VM that I migrated to ESXi 4 5.1 a year ago and have used without problem.  Recently, it has become necessary to increase the size of main drive of the 60 GB original but the size options are grayed out.  I checked and it is y no snapshot files or y at - it hard < 0000 files > in the directory of the virtual machine in the data store.  I even created a new snapshot, then used the "clear all" button to make sure that all of the snapshots are gone, but the size options are still grayed out.  I tried the upgrade virtual hardware then in the VM properties, I see that the version is vmx-09 that I understand is the latest version.  The disk is a thick accrued lazy set to zero that I thought that maybe part of the problem, so I added a new thin provisioned disk and I can't increase the size of this one either.  It seems to be limited to this virtual machine, but as I have other VM is present on this server I can increase the size of the disk without any problem even if I have not updated the virtual hardware for those so that they are always to version 7 (I don't know if this matters).

  So I'm quite positive, there is no snapshot or snapshot files, I updated the latest material available, and I'm sure that the type of disc is not serious because it seems to apply to thin provisioned and drop discs thick.  I'm out of ideas.  Any help would be appreciated!

  Kind regards

  Tim

  Hi Tim,.

  Have you tried to add additional SCSI disk (which adds the controller and drivers needed). Do a clean reboot then switch your IDE to SCSI and if successful (after other clean reboot) remove the new drive that you have added. By doing this, you are making sure the drivers for the controller are installed before switching types.

  See you soon,.

  Jon

• Finish the backup after the failure of the backup

  I have Vista Home Premium and has begun in full who has not completed a new backup (not) because of the lack of free space on my external hard drive. So I released the space by removing an older backup. After stopping and restarting my PC because of display problems on the monitor, I wanted to try and resume the backup failed, but it seems that Windows is now again a new full backup. Is it possible to get just Windows to complete the first incomplete backup, without having to start a new backup complete? Thank you in advance.

  In fact the backup failed threw when I clicked on backup files. Initially, it seemed Windows began a new full backup but backup completed in less than an hour and added the files to the backup incomplete, similar to an incremental backup. I guess that Windows has recognized that the new backup had not completed and recognized the game on the external hard drive to backup.

• Office has increased in size and the print size is almost double.

  Original title: Hi, my office decided to increase in size - how to decrease (printing is almost double than it should be).  Thank you.

  Printing has suddenly increased - how I reduce to normal size please?  Thank you.

  Hi GlenisRhodes,

  1. What is the brand and model of the printer?

  2. This occurs when you try to print from a specific program?

  3. when the problem started?

  4. did you of recent changes to the computer?

  You can try to change the resolution of the screen and check.

  Change the screen resolution

  You can also try to print a test page and check.

  Print a test page

  Hope this information is useful.

• Only 80% of the size of the screen after getting out of the mode standby

  After doing a complete clean reinstall of windows 7hp by a geek I had a problem with the size of the windows form when coming out of the fashion watch? (about 80% and the text is distorted) I even disabled sleep mode and still am having this problem... screen size is the value recommended 1920 x 1080 on viewsonic monitor.  Have windows 7hp with ie9. All antivirals and malaware say all is well in the registry, etc.    Thanks for your help!

  On the right side of this page: http://www.cpuid.com/softwares/cpu-z.html

  Click on the link that says ' 1.68 zip, English.

  Here's a direct download link: http://www.cpuid.com/downloads/cpu-z/1.68-en.zip

• Photos - increase in size of the Image in the surface Gallery

  The small image tiles are too small for me to see when I'm trying to select among them for various purposes.  I would just like to have pictures of tile less, but BIGGER.  Were not able to understand this through settings.  Please advise?  Thank you.

  You are looking inside your photo folder?  If so, click on the view tab at the top, then click on 'BIG PICTURES' as the size of the thumbnails.

  Tip: If you have a scroll of the mouse wheel or a touch pad that can be scrolled up and down, you can use it to get even more great. Simply simplement cliquer click on an icon, then hold down the Ctrl key while you scroll upwards.