Big problems for export video in Media Encoder - details

Similar Questions

• How can I make the export in Adobe Media Encoder CC 2015 format MXF 25 Pal 720 x 576, in CS6 is possible!

  How can I do for export in Adobe Media Encoder CC 2015 MXF 25 Pal 720 x 576 format?

  CS6 is possible!

  Hi Ser VOC,

  Here's how you can do:

  

  Under Format, select MXF OP1a and fewer Preset: DV PAL 25.

  Thank you

  Regalo

• CC 2015 shows the updates available for the creation and Media Encoder, but fails to download/install them.

  CC 2015 shows the updates available for the creation and Media Encoder, but fails to download/install them. Generated the log shows "ERROR: DS015: cannot read the target of the symbolic link to the file source (...)" at the end.

  What am I supposed to do?

  Thank you, Carlo Romano

  Finally, what worked for me was to completely uninstall and reinstall both apps until 2015 for CC.

  Thanks a lot for the quick reply anyway.

  Carlo

• Computer crashes when exporting with Adobe Media Encoder

  Hi, whenever I start to export via media Encoder, my computer kind of freezes... I am not able to change or even to use no matter what other applictions when exporting with Adobe media encoder. It didn't happen with the old version CC7. All advice please? Very frustrating.

  Hi Henen,

  Hi, whenever I start to export via media Encoder, my computer kind of freezes... I am not able to change or even to use no matter what other applictions when exporting with Adobe media encoder. It didn't happen with the old version CC7. All advice please? Very frustrating.

  Press SHIFT when you start the program. If this does not work, please contact support at this link: http://bit.ly/PPro-support

  Thank you

  Kevin

• Blue mount when you export images via Media Encoder CC 2015 Lumetri

  Hi all

  I have a really weird issue involving images with a Lumetri applied LUT and export through Media Encoder. Rendered images will come out with a massive distribution of blue color. I use CISC-c of a MkII C100 and application of color Lumetri with a LUT and then a few basic correction (no creative effects). There is no other effect applied to the images, and the exported result is not equivalent to the images without the applied LUT (so this isn't like ME is just without taking into account the effect). Export directly from the first results in video correct research, as does the export through ME without the applied LUT.

  Images of example (as it appears in the first and when you export directly, first and then when exported from Media Encoder with the color cast):

  

  I'm under Premiere Pro CC 2015 (up to date as that is to ME) on Windows 7 64 bit Pro, Intel Core i7-4910MQ, 32 GB of Ram, Quadro K4100M (362,13 drivers). I can't say with certainty when this problem first arose, partly because I am not using lut for a long time, but it was certainly past at least a month or two. I tried searching online on this subject, but the only similar thing I came up with that was of CS5.5 and given workaround solution was to place an effect of cropping on the video, which I have tried without success.

  Someone else has experienced this or has any ideas please? I can export directly from first as a solution, but it's not ideal at all because I can't move on to other work while it exports.

  Thank you very much

  Tim

  Hi cast,

  What is the setting of reading Mercury on Premiere Pro and SOUL engine?

  In addition, in the preferences of the SOUL, could you please uncheck the option "Import sequences in native mode" and check if it works?

  Thank you

  Regalo

• Problem with Wraptor STC in Media Encoder CC2015 of banding

  Hello

  I need to prepare a .dcp for a cinema projection and I colleague had recommended the Wraptor DCP plugin that comes with Media Encoder CC. After a few test export I noticed some odd banding and artifacts around the shadow to the image (see attached image).

  I don't know if it's because of the video player I was using (VLC) or a codec problem. It is certainly not in the original image. If anyone has some light on the situation that would be greatly appreciated. See you soon!

  

  After some exports and a screen test, I can confirm that the strapping is non-existent. The flaw lies in the video player and not the codec.

• Audio damage when the file is exported in Adobe Media Encoder queue?

  Hey guys

  Hope you can help me with my problem...

  I'm fairly new work in After Effects, so I might have too have it explained in detail.

  I am currently working on several animations for the customer, where I did the visuals and got audio lying elsewhere...

  There have had no problems with the audio before the lengthening...

  When I play the audio (wav file) new in Quicktime format, there is no problem at all - it's the same for when I play the audio in AE, no problem either...

  BUT when I export the files through Adobe Media Encoder queue (h:264 - mp4) audio is corrupted and when played in Quicktime,.

  the last seconds is played at least twice, just to repeat... I tried with 2 of 5 files, and both were corrupted, with the same error in the end...

  I can't know if the files are corrupt (the guy who fixed them) in a way that he doesn't ' watch that "when files are exported through AMECQ...

  Or if I just do it wrong... I worked at AE for about 5 months, so I don't know yet of all the parameters, etc...

  Hope you can help because it is an urgent task and there is no one else in the office that I work, knows nothing about AE... Haaalp!

  Thank you

  Katrine

  This problem is fixed in update fixes after effects CC 2015.3 (13.8.1). This update, available now, can be installed by using the creative Office Cloud app, or by choosing Help > updates within any Adobe application.

• Export from Adobe Media Encoder Mac AVI

  I would like to export the files AVI of Adobe Media Encoder (CS5 or later version) on a Mac running 10.6.8 or later. I am able to purchase codecs for Mac to do?

  AVI is not a codec; It is a type of container (more precisely, it is the breadsticks for video and audio in the video for Windows system). You cannot export directly to AVI from Adobe Media Encoder on Mac OS.

  What if I need an output to AVI on Mac, is to create a QuickTime (.mov) movie lossless encoded from Adobe Media Encoder and then worked for QuickTime Pro to convert to .avi.

• How to make a dvd with an audio track after export using the media encoder? I have 2 separate files?

  Hello

  I just burn a video that I have completed. It's a m2v file and so I have a point of view audio AC3 and a video track. I thought I was ready to go, but I can't understand how to burn audio and video on the same disk. It's very embarrassing because the settings I should use for export to keep video quality will give me 2 separate files.

  So, what programs you use or recommend I would like to add an audio track? I don't want people to have the ability to switch between tracks, I just want a normal life trace that you have when you watch a movie, I mean he's playing just by default.

  Thanks to the adv.

  Mark

  Again is Adobe for DVD software, although there are others.  In General, the export of the elementary streams for use in an authoring application is the preferred method, then you are doing things.

  Specific help again, I would do you for the help file again.  If you decide to use another application, its own set of instructions will guide you.

• Export of Adobe Media Encoder CC 2015 H.264, very poor quality compared to VLC

  Hello

  I do a few screencast with VLC Media Player (www.videolan.org, free and open source), it picks up my office and exports the file to H.264 format at 25 fps. Can I change this in the body and also to export the video in the H.264 format.

  All right, but... The original video files of VLC has a good quality with a very low rate (200 Kbps), and when I try to export the edited with the same flow of SOUL video, the quality is just horrible! Artifacts, fuzzy, with a few blocks... Even if I export with a rate over 20 times higher than the original file (4400 Kbps), the quality is not as good as the original.

  Here is a comparison between the export of three:

  

  Can you explain to me why there is a big difference even if the flow is multiplied by 20? Here are the settings of export (with a rate of 400 Kbps):

  

  Thank you very much for your help and please excuse my bad English

  Any time you take a highly compressed encoded video and then re - encode at such a low rate, it will look bad. In this case, your examples are not surprising at all.

  I don't know how VLC it coded in the first place (color space limited?), but I know that for some that you'll never get a good video performance with such a low flow and a high resolution - especially since you're re-encoding video already highly compressed.

  As a suggestion, regardless of your final settings, 2-pass encoding will give you a slightly higher quality for your budget to flow. 1 pass encoding in my experience is generally better for situations where you are not worried about bitrate, or when you need to code something quickly.

  Good luck with your efforts!

• 10 PE problems for export for Samsung TV

  Hi forum.

  I bought a new video camera (Panasonic SC-V700), and I'm not used to the use of HD formats.

  I bought PE10 (I desided to change the Corel) and export my video on my NAS (Synology 211 +) and play on my TV (Samsung c6005 46 '') via DLNA.

  BUT:

  Looking at my TV spec´s it supports (among others):

  Header 1	Header 2	Header 3	Header 4	Header 5	Heading 6	Heading 7
  Filtype	Container	Video codec	Oplosning	Billedhastighed (project of law. / sek.)	Bithastighed (Mbps)	LYD-codec
  *. JPS	JPS	H.264 BP / MP / HP	1920 x 1080	6 ~ 30	25

  MP3 / ADPCM / AAC

  And when I export items that I use:

  MP4 H264 1920 1080 p 25

  But the file will not play.

  I tried a few other options, but still no luck.

  No one knows what the format to use to make it work?

  (There is no problem to play the file on my tablet from Samsung. And the connection to the TV is testet OK, since everything else works.)

  Cordially Settemand

  Maybe it's really more a question for Samsung or NAS. Looks like you have a file according to their recommended output specifications. It even works on your Samsung Tablet!

  So it may be necessary to contact Samsung to find out why .mp4s will not play on your TV.

  Also, could you get MP4s output in your Corel program to play on TV?

• Droid - problem sending Email - BIG PROBLEM for many!

  I've been back for quite some time trying to set up my work email.   I got everything to work some time ago, except for sending, response or message transfer.  You can see my previous post on this regarding

  Anyway, I wanted to let everyone know that I discovered, as apparently a lot of people will not be able to send, answer or transfer e-mails using their phone.

  I talked to a technician at verizon who told me that verizon used to provide SMTP servers by courtesy, but no longer do.  I was told that I had to check my email provider to get their SMTP information.  Unfortunately, my e-mail provider does NOT provide SMTP servers.  So basically the tech told me that I won't be able to send, to meet or to transfer emails through my phone.  The technology could not tell me why verizon ceased to use the SMTP servers, but read quite a long list of some popular mail providers who don't provide the SMTP servers and so anyone who tries to use these emails would have the same problem as me and not be able to send emails through their phone (tech shook off a certain big email providers that do not provide the servers SMTP. For example, according to me, that said, that Comcast has no?) -. Anyway, apparently Blackberry provides its own email service, so if you have a Blackberry it wouldn't matter.  I'm quite surprised that the Droid is a smartphone, will not be able to send different emails to a large number of e-mail providers.  So my question, why verizon would stop providing SMTP servers so for many email providers, it is the only way you would be able to send e-mail.  Shouldn't the (Motorola), or verizon Droid, do something about it?  I think it is crazy enough to not be able to use your email on a smartphone, not to mention the most recent smartphones.  They should not get the same thing that Blackberry made so that you can send emails or verizon should not provide SMTP servers so that this could happen.  Fortunately for me I love the Droid for several other reasons, and it is not an absolute necessity to be able to send my work email (although it would make things a LOT easier), but I can def. see how that annoy people and get them to get another phone that allows them to use their electronic mail.

  
  

• Driver problem for the dashboard of media

  Hello

  I installed the dashboard of media today, but there is a problem. The first time that an SD card is inserted in the jury he identified OK. After the withdrawal of the security, it is not identified more and cannot be opened. I need to restart the PC (Windows 7 64-bit) to open a card again. What is the solution to this problem? The seller has no drivers and said Windows 7 should identify the device.

  Hi Alexander,.

  If this is the scenario then, try the steps to uninstall the USB Device Manager, uninstall the drivers of device from the list of programs, and then download the latest drivers from the manufacturer's website.

  Step 1:

  Uninstall the device from Device Manager

  • Press the Windows key + R to open Run box.
  • Type devmgmt.msc in the run to open Device Manager.
  • Expand the USB section.
  • Find the USB device.
  • Click with the right button on USB and select Uninstall.
  • Select the check box delete the driver for this device.
  • Restart the computer after the uninstall is complete.

  Step 2:

  Uninstall the drivers of device from the list of programs in the control panel

  • Click Start, select Control Panel
  • Now, click on programs and select programs and features.
  • Find the USB.
  • Right-click USB driver and select Uninstall.
  • Restart the computer after the uninstall is complete.

  Step 3:

  Download and install the latest drivers for the USB on the manufacturer's Web site

  Keep us.

  Kind regards

• Newby - problems for export non-standard characters. CSV or delimited by tabs

  I'm trying to export data from a table where many fields contain non-standard characters such as double quotes * []] * or * labels *. If I * export to one. CSV file, embedded quotes foul invariably upward alignment of output columns and if I select one * export tabs-delimited *, built-in tabs do the same thing.
  
  Is anyway that I can specify the text qualifier to use so that I can choose a character that is not used in the text (like, for example the tilde * [*] *)?
  
  I use discoverer 3.1
  
  Thanks in advance

  Hello

  With a requirement of export complicated like this, it is often better to create a named calculation that returns the fields in the required format, as a single column, for example

  col1 | » ~'|| col2. » ~'|| COL3

  Then, you can simply export the report to a text and get all the fields with the correct delimiters and the characters replaced.

  Rod West

• recently I upgraded my adobe acrobat in my 3rd generation ipad ios 8.1.2 after update my files manual pdf including more than 500 MB are very slow to respond and stuck all the time... .it has become a big problem for me now... I'm stuck... can not

  Help me

  Player crashes with files larger than 700 MB

  700 MB files are exceptionally large.  Any PDF reader you choose, it would be slow to display the content of a PDF in particular for previous generations of iPhones/iPads with CPU/GPU less powerful.

  Because your files are so large, I am afraid that you will not be able to share files with us (Adobe) via attachments or links to the cloud storage.

  Here are a few suggestions (not solutions, however).

  • Update to the latest version of iOS on your iPad.  iOS 8.1.2 is old enough. In general, you will get the performance and bug fixes update to a newer iOS.
  • Try other free PDF viewers for iOS.  For example, try Apple iBook.  You will not be able to add comments, annotations or filling out forms.  But it may be more appropriate for display.
  • Use the desktop version of Acrobat Reader.   All desktop/laptop computers are faster than iOS devices.

  We will make an effort to improve performance with large and complex files in Acrobat Reader for iOS. However, it would be difficult to overcome the limitations of hardware and file size. Sorry for the inconvenience.