binary passage replaces the State after commits

Similar Questions

• VDividedBox not to restore the position of the separator after the passage of the States

  I have two panels in a VDividedBox: a top and a bottom panel. Then I create a State, which will replace the top panel with a third round table. During the transition to the base state, however, the top panel does not occupy the space divided, it is pushed all the way up and is obviously reduced to a minimum. In addition, what I've noticed, is that if I change the position of the partition before moving to the States, everything looks good. Please see attached code and help me with this problem I hope it fast. Thank you.
  
  

  Thanks for the help. What I wanted was newPanel should have the same height as that of Top. So, I tried this and it worked:

  
  
  
  
  
  
  

  instead of linking the height of the two panels in a , I just put directly in .

• PopUpButton does not work after passage of the State

  Hi, nice to meet you.
  
  I work with FLEX Bulider in my Labs project.
  
  I used the States to demonstrate two different user interfaces. In one of them, there's a PopUpButton compenont.and it is not the compenont.
  
  When I run the application. I'm going between the two States. I find the popUpButton cant work .it open canoe.
  
  Could someone make me know WHY and how to handle this issue?
  
  Some codes my appliction like this:
  -------------------------------------------------------------------------
  
  

  This method works. I have change the visible property instead of using removeChild, although I don't know why yours does not.

  
  http://www.Adobe.com/2006/mxml '.
  layout = "absolute" >
  
  
  
  
  
  
  [Bindable]
  public var treeXml:XML =
  
  
  
  
  
  
  
  
  ]]>
  
  
  
  
  textAlign = "left" label = "Please sΘlectionner...". "x ="84"y ="85">
  
  
  labelField="@categoryName' showRoot ="false ".
  Width = "160" textAlign = "left" / >
  
  
  

• How to write good model to replace the string after a static string?

  Select regexp_replace ("Do replace not CONSTANT" VAR_123 "needs to be replaced", "CONSTANT" [A-Z0-9] ',' CONSTANT "REPLACE") twice;
  
  The output is:
  Does not replace CONSTANT 'REPLACEAR_123' SHOULD be replaced
  
  Output available is:
  Does not replace CONSTANT 'REPLACE' SHOULD be replaced
  
  
  What is the right model to solve my problem?
  
  Assistance is needed.
  
  
  Concerning

  possible alternatives

  /* replace everthing in between "" */
  select regexp_replace('Do not replace CONSTANT "VAR_123" should be replaced '
                      , '"([A-Z0-9_]*)"' ,'"REPLACE"')
  from dual;
  
  Do not replace CONSTANT "REPLACE" should be replaced 
  
  /* replace UPPER letters, Numbers and Underscore after keyword CONSTANT an in between "" */
  select regexp_replace('Do not replace CONSTANT "VAR_123" should be replaced '
                      , '(CONSTANT) "([A-Z0-9_]*)"' ,'\1 "REPLACE"')
  from dual;
  
  Do not replace CONSTANT "REPLACE" should be replaced 
  
  /* replace alphanumerica values including underscore after keyword CONSTANT an in between "" */
  
  select regexp_replace('Do not replace CONSTANT "VAR_123" should be replaced '
                      , '(CONSTANT) "([[:alnum:]_]*)"' ,'\1 "REPLACE"')
  from dual;
  

  One of the problems is that did ' t take you into account how the underscore character '_' is recognized.

• HP 700-330qe: how to disable or replace the SSD on HP 700-330qe

  Help for my HP 5 months! It kills Me!

  I bought a HP 700-330qe in 2014 from Amazon and just started getting SMART of Windows hard disk errors whenever my computer restarts, telling me that the hard drive failure is imminent. He also tells me to shut down the computer immediately, save it, contact the manufacturer, etc. Never seen it in any PC I owned before. Naturally, I freaked out and did some internet research, discover that it is relatively easy to clone and replace a hard drive. I ordered a new hard drive Western Digital 3 TB of Amazon, a docking station for disc brand cable hard of Amazonia and downloaded the Macrium Reflect free disk management software.

  Items from Amazon arrived in a few days and I got to work making a clone of my one and only hard drive. Clone was made with little problem. Shut down the computer, it opens and replaced the old hard disk with a new one. Start the computer to the top and got the same message on imminent hard drive failure! So I paid more attention to it this time and looked up the model number in the warning message, which was: ScanDisk SDSA6DM - 016 G-1006. I Googled that and found it was the disk solid state drive (SSD) used as a cache to speed up certain operations. Arrgh.

  I stuck my old hard drive in the hard drive docking station and was ready to be cloned partition SSD and all partitions on the hard drive to the hard drive and the removal or at least unplug the SSD drive to get rid of this problem. The software told me that the SSD is shaped as MPR (or something like that) while the main hard drive is formatted as GPT, which are different types of hard drive, formatting, so you cannot copy these different types of partitions on a hard drive.

  So here's my options as I see them:

  (1) I have to either disable the SSD, but I don't know how and I don't know if the computer will always start the same. Windows is partially installed on SSD? I do not know.

  (2) to clone and replace the DSS about the same way I did with the main hard drive. I can get the SSD according to Amazon for $49: Kingston Digital 60 GB SSDNow V300 SATA 3 2.5 (height of 7mm) with adapter Solid State Drive SV300S37A / 60G.

  For the option #2 above, the only problem is that I have no idea where the OEM SSD of ScanDisk is currently installed in my computer! It is in the hard drive cage? I don't see anything else installed there. I thought it was in the cage directly above the hard drive cage, but I think that what I was looking at was the front memory card reader/USB ports. I don't have on CD Player installed and I can see where it is. Help!

  PS: I also downloaded EaseUS Partition Master 10.2 and it allows to analyze the SSD drive. While it was scanning it found 9 bad blocks (on tens of thousands of blocks), but when he finished the analysis it says there is a lot of blocks. For this to happen on an SSD, which is supposed to be more reliable than hard disks of small, to make this so much more aggravating situation. At least, I upgraded my hard drive 2 TB to 3 TB and know now that I can do. Sigh.

  Yes, I had a frusrtrating very experience with HP customer support, even after it was raised to a case manager based in the United States, who called me home. She found no part at all in its computer system and wanted to send me in my whole PC to a service center customer (it was still under warranty) which would take at least 3 weeks. I said no and went forward and the DSS out of my computer. I stopped receiveing the error messages and did not notice a slow down in performance, but went ahead and bought and installed this one, just in case it actually provides an advantage: My Digital 32 GB SSD Bullet Proof (on Amazon for $25).

  As a note to end funny to this drama, about 6 months after my discussion with HP support I describe above, I have randomly mailed an envelope of HP with the exact 16 GB SSD, they said that they didn't in their system. It also included an envelope to return my faulty SSD and a stern note saying if they do not receive the defective item within 3 days my credit card (that I never gave them) would be charged. I threw a long time ago the defective item and just throw it back into a drawer... or maybe that I returned it in the envelope for return of defective product? I don't remember really.

  In any case, it was a horrible customer service experience, and since then I have another HP Envy (my PC 3 year to my son) have a hard drive and video card fail at the same time. I replaced the two after a few problems, but no matter what I do, it can get its setup dual monitor want to work more. I tried several video cards and nothing.

  All of these factors combined caused me write off HP for the future PC purchases. The guys in my company IT say it's the reason why we only buy Dell computers at work (we have hundreds of maintain). They do not use strange pieces like these small SSD cache records, and their parts are standard and easy to replace because of the case. I'll either get a Dell or ASUS as my next PC.

• Continue the block after the exception management

  The guys in the slot block.

  create or replace procedure proc_case
  (p_in IN number)
  is
  begin
  case p_in
  when 1 then
  dbms_output.put_line('its one'); 
  when 2 then
  dbms_output.put_line('its two'); 
  end case;
  dbms_output.put_line('after the exception handler'); 
  exception when case_not_found then
  dbms_output.put_line('its not found'); 
  end;
  

  When the procedure is executed as follows.

  begin
  proc_case(3);
  end;
  

  It shows the statement in the block of exception, but after that it does not run the statement following the exception handler and the outputs of the block, how can I execute the statement after the end case statement. I do not use the Else statement in case because I wanted to understand the logic of this block.

  CREATE OR REPLACE

  PROCEDURE proc_case

  (

  p_in in NUMBER)

  IS

  BEGIN

  BEGIN

  P_in CASE

  WHEN 1 THEN

  dbms_output.put_line ('the one');

  WHEN 2 THEN

  dbms_output.put_line ('two');

  END CASE;

  EXCEPTION

  WHEN case_not_found THEN

  dbms_output.put_line ("' its not found");

  END;

  dbms_output.put_line ("' after the exception handler");

  END;

• High temperature after replacing the CPU T2500-> T7200 at T60

  After replacing the T2500 CPU temperature CPU T7200 varies from 70 to 85. It seems high, I think about the replacement of the thermal grease or thermal paste application. What could be better? To finish with the original grey Ribbon and fix a new radiator or better coat of toothpaste?

  orion9727 wrote:
  There was a test done and toothpaste is out near dough more themal.
  Artic 5 should never be used in a laptop.
  He money and this is a no no on mobile cpu.
  Use a no driver or a thermal buffer.

  the gray Ribbon is a preferable themal pad use this WHICH CAME into IT.
  Because maybe a wedge and to finish with this and without contact.

  you upgraded from a 31 to 34 watt TDP watt not much, but he's going to run hot.
  75-80 c is hot Yes, but you have class 65nm cpu will run hot because it is old and a lot of work.
  If you all know toothpaste can served in the tests but I have not use because it can dry out and not sure what exacly.
  heat wise, I do belive in toothpaste is wise very good heat but stick with the gray Ribbon.

  Please do not take into account the (re) post above.

  I used AS5 on thousands of ThinkPads with no ill effects, in fact the opposite. Research experiences minimal posted by other owners on Bill Morrow ThinkPad Forum will confirm this statement as well. Arctic Silver is as good as it gets unless you want to spend $50 for a tube of thermal paste.

  To OP, your machine is running too hot for the processor in question. My 15 "T60p with T7600 is inactive at least 50 degrees C and does no more than 62 in normal use. And Yes, it was AS5 inside.

• DeskJet 3070 ceased to print a few days after replacing the black print cartridge

  Please help me, I have HP Deskjet 3070. There works well since then, but I replaced just the black cartridge with original ink and he confirmed that it was a real ink, I printed a few documents and everything was fine and it's just less amonth ago.

  But unfortunately I turned on the printer a week later, but it prints, it only passes through the paper as if it is printing but instead he brings her on a white sheet.

  The task of mentenance using I could see the State of health, says the good. Show full of ink cartridge ink level. Device report - derniŠre indications affixed some pink, blue, yellow rectangles and the printed report print 4 holders.

  I noticed someone has posted a simlar here question one obtained help same day via private message that he has fixed his problem, I commented here a week ago and had asked for help, but have had no response to date.

  Today, I installed a new black ink, thinking that he could be in ink, but she does not always print anothere.

  Please help me.

  New replacement printer arrived today with the new inks, installed game machine with the new inks and everything works as it should. Old machine is to immerse for recycling as advised.

  I'm relieved and I appreciate the after sale HP just rendered services. Although I am a little worried and now fear that it could happen again "after the guarantee" since no clear explanation is given in what concerns what could have caused the failure. And judge with an option of replacement is the best solution, it seems like the cost of the den could be greater than the value.

  Finger is crossed, I hope that it will serve this time or at least give reseonable service before getting on my nerves.

  Thank you HP.

• My printer HP LaserJet 1536dnf printer prints black pages after replacing the toner with a new one!

  I changed the toner cartridge for my printer HP LaserJet 1536dnf with a genuine HP toner cartridge and now it's printing the pages in black.  Any suggestions on how to fix this?

  Thank you!

  Hi @Beaglemom49779,.

  I see by your post that you have replaced the toner and now get all black pages. I can help you with this.

  Have you had the same problem with the printer before replacing the toner?

  It could be a hardware or with the printer fuser problem.

  If the problem started just after replacing the toner then most likely, the toner.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector)

  Number one cause of problems with toner.

  Check if the drum unit for damage:

  1. remove the cartridge of toner product and check that the tape has been removed.
  2. check the memory chip for damage.
  3 examine the surface of the imaging drum on the bottom of the toner cartridge.
  CAUTION: Do not touch the roller (Imaging drum) on the bottom of the cartridge.

  His fingerprints on the imaging drum can cause print quality problems.
  4. If you see the scratches, fingerprints, black on the drum, or any other damage on the imaging drum, replace toner.
  5. If the imaging drum does not appear to be damaged, rock the toner cartridge gently several times and reinstall it. Print a few pages to see if the problem is resolved.

  Please call our technical support if the there is a problem with the toner and you learn about a replacement, to the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Contact HP.

  Good day!
  Thank you.

• System Restore to factory settings after replacing the hard drive?

  I have a Lenovo ThinkCentre A52, which recently required a change of hard disk and the removal of a defective RAM 1 GB stick. When I bought my computer, it came with Windows XP Pro and the new hard drive that the updated computer has Windows XP Pro, but it seems to be missing a large part of the software (drivers and programs) that originally came with the computer, and even if I downloaded and installed most of them since the Lenovo Web site There are still some problems related to software that I can't fix. Ideally, I'd like to go back just to restore the system to the factory settings using the ThinkVantage Rescue and Recovery program, but I don't know if it will work. All programs and the necessary drivers will be installed again, even if my current hard drive is not 'knows' thereon? I need to get a Windows XP Pro installation CD, if I want to keep my operating system? Also, is it important that my current hard drive is half the previous, or that I now have half as much RAM?

  Thank you

  After replacing the hard drive, the only way to restore it to the State of the plant is using the Lenovo installation diskettes. You can also ask if Lenovo has a solution to your problem without having to reinstall Windows.

  You can download Lenovo drivers if they are not included on the installation disk. The size of your hard drive does not matter.

  Lenovo - call to order recovery disks:
  http://support.Lenovo.com/en_US/product-and-parts/detail.page?&LegacyDocID=YaST-3P2QYL

• Value of the element after replacing the automated process of line does not?

  Greetings!

  I have a standard process of line automated filling in the fields on my current form after the header. Certain values that I need to replace by calculations from the data in other tables. If right after the line, I inserted another process for this. The results are actually stored in the database, but does not reach the customer. Why? Somehow it seems, once the line is completed, the html elements are not affected more during the processing of the page.

  So I resolved to set certain values with a call ajax after the page is loaded, but which actually is not the best way to do this.

  In coordination with the question: what is the difference between the headings of before and after? I looked in the documentation, but wrong in details. Myself I havn't found no difference between the two.

  I hope you can help me get clarity on who and how to implement the calculation as well as the shape of line.

  Thanks a lot and best regards,

  Tobi

  Hi TobiP,

  If your item has as the Type of Source database column, and I think you do since your using an automatic process of line Fetch, in the properties of the element, you'll find a region called 'Source '. If the Source value or expression is not null and the Source is set to "Always replace the value that exists in the session state", then the value of the source will be taken from what you put as the source and ignore session state values defined by other processes. Assign to this "only when there is zero current value in session state" to use the session as a source value.

  Kind regards

  Joni

• Hello world? I wonder where we can see the State repaired our phone, after that send it for warranty repair?

  I sent my iphone to warranty service for more than 20 days and still not recover.

  I wonder where we can see the State repaired our phone, after that send it for warranty repair?

  Thank you and best regards!

  You will receive emails with updates from Apple. Have you received one indicating that they have received your iPhone?

• In the Pages, after copying a passage, a box pops up that I can not remove

  In the PAGES, after copying a passage, a box appears that I can't delete and I can't edit the passage

  What Pages, what the passages, where?

  If it's around the text and you copied this on the Internet, probably you just caught a few html formatting to the text. Paste without style.

  Peter

• Want to 800-060: reactivation after replacing the motherboard

  I bought a HP Envy 800-060 with Windows 8 pre - install Amazon in July of 2013. It was an incredible computer since that time, and when the free update of Windows 8 for Windows 10, I did immediately released. Recently, however, the motherboard has failed on the computer. It would not stay same POSITION, and after much troubleshooting, I finally decided to replace the motherboard. Now that the computer is running again, I guess that the motherboard change was sufficient for the operating system to think that it is no longer enabled. I was never provided with a key of Activation of OS (Win8 has been pre-installed), and Microsoft has suggested that I contact HP to find the original key. I've looked everywhere on the chassis and inside the tower for a valid Windows activation key, nothing helps. I tried to find a phone number to call for support, but my product is outside the guarantee. I don't need advice or troubleshooting tips (so I don't pay the $59.99), all I need is my activation key valid Windows based on my serial number of the product. Anyone know the best way to achieve HP with this problem and have it is resolved?

  Thanks in advance!

  JC

  jcontino889

  The unfortunate, is that your original product key has been incorporated in the firmware original by HP motherboard UEFI when the PC was built.  There is no way to recover this key now.

  HP retains no record of keys to individualized product corresponding to individual computers, so they won't be able to provide you with the original key - and they are under no obligation to provide you with a SECOND key, that you didn't do the replacement of HP hardware.

  With the product now being out of warranty, it's really call HP or not you upload support - and the experience I have had with older equipment-, they do that, there's just no way around IDs.

  HP customer support is really the only way you have to get support.  If they don't help you for free, because your PC is out of warranty, there is nothing we can do about it on this forum.

• Satellite Pro A30: after disk HARD replacing the BIOS does not see DVD or HARD disk

  Hello

  I bought a new Pro A30 of Satellite earlier.
  Shortly after, I noticed the system sometimes
  would freeze, with a rattling of the HD.
  A reboot cold was the only solution.
  I was told to replace the HD I did but the
  problem persisted with the new HD.

  I tried a known working HD and the problem still persisted.
  At this point, the warranty period has increased.
  Frost started happening more regularly, and
  now, the BIOS does not recognize the HD player or DVD.
  It starts and then try to boot from the network,
  because he doesn't have a HD or DVD player.

  At this point, I think I need a new system board.
  Someone at - it other advice or seen this problem
  before?

  Thank you
  Ray

  Hello

  What happens if you remove the CD/DVD drive or the HARD drive?
  The laptop recognizes one of these devices?
  Have you used the devices recommended by Toshiba?

  in any case, this seems very strange and the dysfunction of the motherboard is not impossible