DeskJet 3070 ceased to print a few days after replacing the black print cartridge
Please help me, I have HP Deskjet 3070. There works well since then, but I replaced just the black cartridge with original ink and he confirmed that it was a real ink, I printed a few documents and everything was fine and it's just less amonth ago.
But unfortunately I turned on the printer a week later, but it prints, it only passes through the paper as if it is printing but instead he brings her on a white sheet.
The task of mentenance using I could see the State of health, says the good. Show full of ink cartridge ink level. Device report - derniŠre indications affixed some pink, blue, yellow rectangles and the printed report print 4 holders.
I noticed someone has posted a simlar here question one obtained help same day via private message that he has fixed his problem, I commented here a week ago and had asked for help, but have had no response to date.
Today, I installed a new black ink, thinking that he could be in ink, but she does not always print anothere.
Please help me.
New replacement printer arrived today with the new inks, installed game machine with the new inks and everything works as it should. Old machine is to immerse for recycling as advised.
I'm relieved and I appreciate the after sale HP just rendered services. Although I am a little worried and now fear that it could happen again "after the guarantee" since no clear explanation is given in what concerns what could have caused the failure. And judge with an option of replacement is the best solution, it seems like the cost of the den could be greater than the value.
Finger is crossed, I hope that it will serve this time or at least give reseonable service before getting on my nerves.
Thank you HP.
Tags: HP Printers
Similar Questions
-
After replacing the black ink cartridge, I cannot print and the printer does not recognize my action. I had a printer who worked three days ago and now with the diagnoses, I wonder to load Smartweb print disc which I did not.
Can I get a support phone number to get this problem resolved?
Here's how to contact HP technical support: www.hp.com/go/totalcare (click on printers & monitors, there is a phone number on the resulting page).
-
Will not print black after replacing the black ink tank
After replacing the black ink tank, the printer does not print black data (text or graphic). I ran printing HP and scan doctor utility and printed assessment page. The text is printed in a pale blue color. Gray scale apperas block (far right) to have no black content and has a hint of cyan.
Printer:
HP Officejet 6000 E609n
Thanks in advance for any help
OK because that is a thing of warranty which may be worth dip the printhead as described below...
(1) get a pan and put 1/2 "of very hot (not boiling) water in the bottom.
(2) remove all ink cartridges, then remove the print head Assembly.
(3) gently put the printhead nozzles down in water and soak for 5 minutes.
(4) remove the print head and gently dry the electrical contacts.
(5) replace the print head in the printer and then reinstall the ink cartridges. -
DeskJet 932C, you can print with just replace the black ink cartridge?
My question is basically simple. The printer DeskJet 932C can operate with only black ink? Color ink was empty for a while now, but the printer kept working, printing in black and white. Due to the cost of the ink and the absence of any income available, we just changed the black ink cartridge. The problem now is that the printer will not print not even black and white. Do I have to scrape some funds to replace the color ink cartridge, or y at - it another way to get the printer working with just the new black cartridge?
Thank you in advance!
Michael Sponable
Hello
Your printer can print in black only, but up to a certain point , you need tri-cartouche color otherwise it will not print. It's a little late now, otherwise if you only need to print B & W, a monochrome laser printer is very good and much cheaper to run (in terms of cost per page).
Kind regards.
-
HP Deskjet 3070 will not print black.
I have a HP Deskjet 3070 and recently brought a few pack hp ink 364 ink combo from Amazon. The well installed ink cartages. When I try to print in black continues leaving as Faded or not at all. It's strange look I just made them. The printer seems to print correctly using the other colors like red or blue. I tried to alline in the printer, but it failed. can you help me
Hi, is the printer under warranty?
Troubleshooting steps
http://support.HP.com/us-en/document/c04030353
HP Support phone numbers
-
HP Deskjet 1000 J110: Intense black print with the black ink cartridge only
Hello
I am trying to print the darkest possible black, but simply by using the black ink cartridge. How do I get there?
My printer is HP deskjet 1000 J110 using cartridge HP 301.
I do my drawing in Adobe Illustrator and set the color to be CMYK 100 100 100 100.
If I insert only the black cartridge, the printer will leave empty place where color CMY ink should be or it will fill the space with black ink?
Basically, what I'm trying to do is to increase the density of ink to the highest possible but only using only the black cartridge.
Thank you.
Welcome @didididot,
Thanks to their participation in Forums of HP! I see by your post that you would like to be able to print in the black as dark as possible. I can help you.
You can use the mode single-cartridge:
Use single-cartridge in the HP printer with a single cartridge. Mode single-cartridge begins when an ink cartridge is removed from the distribution of the print cartridge. In the mode single-cartridge, the product can only printing from the computer.
Source: HP Deskjet 1000 J110 series.
Here is a document for printing with black ink only (Windows).
If you use a Mac, let me know.
Feel free to click on the button 'Accept as Solution' and the 'Thumbs Up' for my help. Please let me know the results and if there is anything else I can help you. Thank you! -
touch screen does more than a few days after the release of Marshmallow.
Hello.
I ask for some advise the issue I'm having with my z3 compact.
I was really happy, the phone never had problems, and I always have the software updates as soon as they are available.
Now the phone has 3 days until the end of the warranty and a few days after that update Marshmallow, the screen stopped responding to touch, I couldn't turn off the phone or made a backup because the phone is locked.
I was able to turn the phone off using the power button / stop and continuous volume upward, but after it restarted the problem with the screen.
I decided to do the repair of software with sony's Companion (losing all my data), but even if the problem was not resolved.
And had upward the retailer was bought the phone's NEW in New Zealand sold the company and the new owner doesn't care... sony told New Zealand that they can not do something, because it was in a parallel importer boght... but if the 1 year warranty is international they should not be able to help me?
It's as if this update is programmed to damage the phones in order to decide to buy a new... do you really think that would happen? I'm already regretted that I bought a new sony action cam...
Sorry for the long text.
Any help is welcome
See you soon.
@samsun
It could be a hardware problem unrelated to the updates then, and unfortunately we cannot help you here as users with maintenance problems. You will need to visit an authorized repair shop and get your phone diagnosed by a professional.PS: Guaranteed Sony is not international, it is local/regional.
-
I changed the toner cartridge for my printer HP LaserJet 1536dnf with a genuine HP toner cartridge and now it's printing the pages in black. Any suggestions on how to fix this?
Thank you!
Hi @Beaglemom49779,.
I see by your post that you have replaced the toner and now get all black pages. I can help you with this.
Have you had the same problem with the printer before replacing the toner?
It could be a hardware or with the printer fuser problem.
If the problem started just after replacing the toner then most likely, the toner.
Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector)
Number one cause of problems with toner.
Check if the drum unit for damage:
1. remove the cartridge of toner product and check that the tape has been removed.
2. check the memory chip for damage.
3 examine the surface of the imaging drum on the bottom of the toner cartridge.
CAUTION: Do not touch the roller (Imaging drum) on the bottom of the cartridge.His fingerprints on the imaging drum can cause print quality problems.
4. If you see the scratches, fingerprints, black on the drum, or any other damage on the imaging drum, replace toner.
5. If the imaging drum does not appear to be damaged, rock the toner cartridge gently several times and reinstall it. Print a few pages to see if the problem is resolved.Please call our technical support if the there is a problem with the toner and you learn about a replacement, to the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Contact HP.
Good day!
Thank you. -
My podcast is not always appear 2 days after receiving the confirmation email.
https://iTunes.Apple.com/us/podcast/Church-of-Christ-Northside/id1112198492 Still does not appear in iTunes 2 days after receiving the confirmation email.
It may take a few days: I have to give it another 48 hours and if it appeared then contact Support. Go to https://itunespartner.apple.com/en/podcasts/overview and click on the link "Contact us" at the bottom of the page.
-
After replacing my black cartridge in my HP 7200 printer, it says remove and check right cartridge. It also says this if I put the old cartridge in. Worked well before ink has low cartridge-more
Cartridge OT:Ink
Hi Jim,.
I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.
What operating system is installed on the computer?
I suggest you try the steps from the following link:
Error message: remove and check ink cartridges
http://h10010.www1.HP.com/ewfrf/wc/document?cc=us&DLC=en&docName=c00054462&LC=en&product=391151Hope this information is helpful and let us know if you need more assistance. We will be happy to help.
-
my hp 5550 printer is not printing from a connection direct mac after replacing the hard drive due to the recent recall
So, you have reinstalled the HP software after replacing the hard drive?
What version of Mac OS X are you using?
-
Officejet 4315 slow printing problems after replacing the print cartridge
my printer was working fine until I replaced my print cartridges. I replaced the black with color with 22 and 21.
my test page prints fine and sometimes my impression is very good. but often, my impression is extremely slow. can't understand why it is slow sometimes and other times it is nice. do not have this problem until I replaced my print cartridges.
I found a post on slow printing and I tried the different steps. don't know what the issue is. Thank you
Real new ink installed HP?
You could remove the cartridges, reset the printer and turn on without the cartridges, and then reinstall the cartridges. Eliminate any power surge strips or extensions, plug the unit directly into a wall outlet.
When you mention slow, how to slow down? How long to print from the computer exactly? How long for a print job initiated from the printer exactly?
-
HP Deskjet 3520: My HP Deskjet 3520 won't print black after replacing the cartridge
I just replaced all my ink cartridges in my HP DESKJET 3520 printer (it's wireless). It prints fine colour, but not black. I tried to clean the print head, align the cartridges, check the intake on the cartridges. I have also just opened another black cartridge, thinking maybe my new was defective. So now, I've just lost a cartridge.
so frustrated! My printer is more than a year now. So not guaranteed. When I click on the printer ink levels, he is grateful I have full cartridges - but is not printing in black at all.
FYI, never heard of anyone in case HP. himself seems to have resolved the day after. Now my black ink cartridge works.
-
My computer crashed and a blue screen came a few seconds so that I couldn't read what she says then I restarted in safe mode and then start normally after that I did what it said to do. Then I opened my PC and Firefox does not open. I update a fews days there and it seemed different, as you can imagine, then after a while, it seemed like the old. I also downloaded IE9 which I almost never use and I downloaded Adobe 10 x until all my problems began. I tried everything but nothing works and I'm afraid to uninstall Firefox Control Panel, because I fear that it will mess up even worse things. What can I do?
Upgrade your Firefox 9 browser and check
-
Microsoft Explorer Mini Mouse stopped working a few days after installation
Running Vista Home Premium.
Microsoft Explorer Mini Mouse a few days ago.
Worked perfectly.
Today, it just stopped working - the mouse pointer disappeared and would not pass.
This is a wireless mouse and the blu is always lit.
Restarted Windows - no change.
Use the USB differet for sender - message this driver installed correctly.
No change.
Used to another USB Wired mouse, worked.Hello
Looks like the mouse has a problem.
Tips for solving problems of USB devices - and a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGBControl Panel - Device Manager - click in the empty area - VIEW - show hidden devices
Now look everywhere EXCEPT the USB controllers for your device (cannot be found) and if you find
It RIGHT CLICK and UNINSTALL all. The device is your mouse or similar.now go to the USB and UNINSTALL ALL controllers in the category, but the category itself.
RESET
This refresh battery USB and hopefully it will allow the unit to install. Update the driver as needed.
Here is the similar procedure under XP, Vista is the same, except that we need to clear the specific device if present.
http://support.Microsoft.com/kb/310575This is a utility to help you, but do 1 above.
USBDeview is a small utility that lists all USB devices currently connected to your computer, as well as all
USB devices that you previously used. Run Options and check the 1st three choices to see if one is there.
Try to remove all instances and restart then plug the drive.
http://www.NirSoft.NET/utils/usb_devices_view.html----------------------------------------------
If no joy:
The mini mouse has a 3 year warranty.
Joystick - see guarantee near bottom of page
http://www.Microsoft.com/hardware/mouseandkeyboard/ProductDetails.aspx?pid=002&active_tab=systemRequirementsWarranty
http://www.Microsoft.com/hardware/warranties.mspxClaims of Microsoft Hardware
Hardware support of MS and warranty claims - 1-800-936-5700
I hope this helps.
Rob - bicycle - Mark Twain said it is good.
Maybe you are looking for
-
Using the camera on my iMac, I recorded some videos short 'selfie' with their grandchildren and their transfer to DVD-R discs, using the function of burning of the computer. However, the discs could be played on DVD Player family. Do I need a differe
-
The name of the Table may be 2 lines
Can the name of the Table "numbers be 2 lines?
-
I have Windows xp and Vista on the same computer, my fligth Simulator is on xp. How do I play for vista or I need to install Island all on vista
-
I get a notice to update for KB updates: 2690729, 2604111, 2604121, 2656405. It says update downloaded and ready to install. I hit install then an error code appears, cannot install error code 641... I also have problems with the 6TO4 adapter. Says c
-
troobles with creation Station
I ' v bought a station of creation a few days ago, I installed the CD in my HP pavillion without problems, but windows Vista Pack 2 do not colonize the device, it's show: UNKNOWN DEVICE , I tried all the tricks I know but without any result and now I