BIOS change date

Similar Questions

• Inspiron 15 and Ubuntu 14.04: parameters of the BIOS change removes partion "ubuntu".

  Inspiron 15 3551

  BIOS Rev A00

  14.04 Ubuntu preinstalled by Dell.

  My laptop is brand new. I went through the initial setup in 15 minutes approximately. This has worked well. I rebooted several times without problem. At this point, the boot options are (if I hit F12 at startup):

  Tittle: Startup Mode is set to: UEFI with legacy OPROM: secure boot: off

  THE LEGACY OPTIONS:

  Hard drive

  UEFI OPTIONS:

  PEBOOT

  Ubuntu

  HDD1 - OS UEFI (TOSHIBA )

  Please note that I never really used the start menu. I just use the default value.

  After a few days, I tried to change how the function keys worked, so I restarted and is gone the BIOS, change this setting, then choose 'save changes and "Reset". Restarted the laptop, but couldn't find the good disk (or partition, or whatever - not sure of the exact terminology). A flashed on the screen error: couldn't open '\EFI\BOOT\fallback.efi': 14

  Then the only choice I give myself is to boot from the recovery partition, forcing me to do a reinstall full - 15 minutes more loss of all data.

  If I hit F12 at startup while the laptop is in this State, the boot options are as above, except lack the "ubuntu" option, as follows:

  THE LEGACY OPTIONS:

  Hard drive

  UEFI OPTIONS:

  PEBOOT

  HDD1 - OS UEFI (TOSHIBA )

  I ran the ePSA assessment system, and it shows no problem.

  This problem is reproducible. I've walked through the entire sequence 3 times.

  So, what gives? How can I change the BIOS settings without losing my OS partition?

  Thank you

  Joel

  Today I received my 3551 Dell with ubuntu.  I am facing a similar situation.  If inherited boot mode, then something happens to the boot process for the uefi firmware.  I'm trying to understand uefi starting the process as well as the Partion of EFI (ESP) system works.   A good place is-

  www.happyassassin.NET/2014/01/25/UEFI-boot-how-does-that-actually-work-then/

  Once something bad happens recovery dell comes into play and reinstall everything.

  Another problem that I face is that the process to create a recovery on a usb flash drive media fails. I used different usb pen drives but runs aground with each of them.  The recovery flash drive me would be useful if the computer is required to be returned to factory State.   Please inform your experience with it.  I wonder what partition used by the dell recovery program.

  Also inform if drivers for Windows are hidden somewhere on the hard drive.

  Thank you.

• The batch change date and time

  I have a lot of photos which, for some reason, have lost their correct dates and hours of creation, so I was eager to correct in an easy and enjoyable way.  I unfortunately discovered that Photos is not the batch option to change that used to be in iPhoto.

  When you try to find a solution to my problem, I fell on this batch Change Date and time on a fixed Date, which works well, but not quite how I want it.  What I want to do, that's exactly what the script above does, but rather than increment by 1 minute of each photo, I want to increment by 1 second intervals by photo.

  Having not really used AppleScript before, I tried to change the references to the 'minutes' to 'seconds' but that did not work.  Is it possible to do using above seconds instead of minutes?

  Any guidance would be greatly appreciated.  Thank you.

  Just delete the text "" * minutes ' in the lines where the date is changed. "

  Then time will be incremented seconds.

  For example, for the first version of the script use:

  the value timeIncrement to 1 - increment of time in seconds

  (* select at least 2 images in Photos *)

  say application 'Photos '.

  activate

  game imageSel for (get selection)

  if ({ is } imageSel) or (the length of imageSel < 2) then

  error "Please select at least two images."

  on the other

  defined first_image to the point 1 of the imageSel

  the value first_date to (the date of first_image) as date of

  Repeat with I from 2 to the County of imageSel

  put next_image to the point I of imageSel

  the value next_date to (the date of next_image) as date of

  the value time_difference to (first_date - next_date) + ((i-1) * timeIncrement)

  say next_image

  the value le Date of next_image to (next_date + time_difference) as date of

  end say

  end Repeat

  end if

  return "Set the date and time of" & (the length of the imageSel) & 'photos. The last date is "& ((the date of next_image) as date)"

  end say

  
  

• change date on photo

  the date on the camera was wrong when photographed I can change date right?

  See change the date and time a photo was taken

• Changing data in a tabular view with Oracle MAF

  Hello.

  I need to change data in the table view, which component you would recommend me?

  I use the "TABLE LAYOUT" component, but it is very uncomfortable when I try to change data on each row because it has lost focus on the selection.
  

  Hello

  There is no component entry in table form in the CRG at this stage. The disadvantage - as you mentioned - the use of tabular layout with an iterator is that you must follow and set the current line in the link layer

  Frank

• password change date

  Hello

  What data dictionary, I know that when my sys or other user password has been changed.

  Concerning

  Rabi

  dbksunil escribio:

  Hello

  Oracle follows the expire of the password based on when it was most recently modified. So, looking at the DBA_USERS. EXPIRY_DATE and subtracting PASSWORD_LIFE_TIME you can determine what password was last changed. The last password change time are also directly from the PTIME column visible in dictionary USER table $ (view DBA_USERS based).

  If you have PASSWORD_REUSE_TIME and PASSWORD_REUSE_MAX contained a profile assigned to a user account you can reference dictionary table USER_HISTORY$ for when the password has been changed for this account. This will keep any password which always falls within the limits PASSWORD_REUSE_TIME and PASSWORD_REUSE_MAX.

  Must run this query after the Sys user login

  SELECT user$ .NAME, use$. The user PASSWORD$ .ptime, user_history$ .password_date

  OF SYS.user_history$, SYS.user$

  WHERE user_history .user$ # .user user = $ #.

  =========================================

  OR try this query:

  SELECT name,

  CTime,

  PtIMe

  FROM sys.user$

  WHERE name = 'username ';

  Note: Replace-USER NAME with the user name you need to know the information.

  CTIME tells - moment of creation

  PTIME indicates - change time password

  Thank you.

  Lol, you forgot to copy the last sentence: "under the direction of: varun4dba February 3, 2011 19:28.

  Of

  Password last changed date

  At least paste the link from which copy you it... does not the words of others

• m8100y stopped no boot, no beep, light food. No software or BIOS changes.

  Hello

  I have a m8100y PC which ceased boot, no beep or any other activity (spining hdd or all other front panel lights) light on power visible from outside is light up. There is no software or BIOS changes. He used to work fine and the next day it does not start. I spent the cord with my monitors cord to make sure it's good. Also open the front panel to ensure that the contact of the switch is good.

  What would be my next steps to identify I have

  (1) power supply is ba

  (2) card mother or other components are a problem

  It is a machine for 3 years and older, can the CMOS battery cause me to not start? What does the beep System x many times to warn that. I hear no beeps and the CD wont open, so I know that there is a power problem. But the power supply has an outside light that truns when I plug in the power band.

  You will appreciate a help about what my next steps should be to identify the problem.

  Thank you!

  NB.

  Naimy, welcome to the forum.

  I think you may have a defective power supply unit (PSU).  Are the replaced component in a computer.  You can disconnect all unnecessary items, for example, hard drives, optical drives, USB devices, etc.  After these items are disconnected, try to start the computer.  Here's a guide to troubleshooting of the PSU.

  If you need to replace the power supply, I like Corsair and OCZ.  I normally recommend at least 550W for peak power needs.  I suggest to measure the existing PSU and comparing them to the one you choose.

• How Golden Gate will use change data Capture (CDC) in SQLserver2008R2

  How Golden Gate will use change data Capture (CDC) in SQL server 2008 R2. How much space it will occupy for each table when it erases the data and what will be the retention period for the tables of the CDC.

  So, here's what happens next. Normally, when a tranlog backup occurs, SQL Server may decide to release the tranlog space after the backup of the log, for transactions that have been committed and saved.

  When you activate a form any replication, like with OGG and allowing TRANDATA, you need to eat this truncation periodically. So with your configuration, even if the log backup occurs over 15 minutes, data in the journal are not allowed to be released after the log backup until the log backup that occurs after the 4th consecutive time of work.

  It is fine if you are not concerned about the lack of free newspaper in 4 hours. Just something to keep in mind.

• Nothing happen when I click 'Change date limit' in Tracker

  Hello

  I have a problem with the function "change date limit" in Tracker.

  When I click on update a deadline for a shared review, nothing happen.

  The strange thing is that comments that won't let me put to update the deadline have a way of 'http' then that some of my other reviews - with a path to my local drive - let me update the due date. (I don't know why my comments have different paths, in the first place since I use the same method to create shared reviews)

  I know that the trick to workaround (save a copy of archive and send for review) but I wonder if there is a fix for this problem.

  Thank you

  You get "http" in the path of the test that you had opened the review folder directly from the server.

  You do not need to launch another review, just save the control file if you open the file directly from the server. Then it shows the path of the local disk and you can easily change the deadline.

• How to change data objects and update the corresponding task and task forms?

  Hi all
  
  I modified this thread because I found that I had many questions to ask.
  
  1.
  I'm quite new to OBPM and would like to know how to change data - for clarity objects add a new attribute "Dependents of the Client" "Customer care" - and therefore update the task that uses the 'customer information' what makes via data binding - I get an error message here - or via the data about the data Task-The chosen tab it does not appear to be linked to my approach in some sort.
  
  2.
  Will be the task form that I generated earlier in < 1 > update automatically? Is it possible to update manually if the task has been clearly customized?
  
  3.
  What are the objects of project data? They do not store values in my process. They are for the arguments only - like reusable process?
  
  Thanks in advance,
  
  Kind regards
  
  Yanis

  Hi Yanius,

  (1) assume that you start from scratch. First, you declare your data object structure. To do this, you must go to the BPM project Naviagtor, right-click on 'Catalogue of trades' and create a new Module. Then you can right click on the module you created and select the new object of trade. Add all the attributes you need. It is the same to declare a class in Java. Second, you must declare a variable of the type process you have created: select the process, go to the Structure display (if you don't go and activate it in menu view Jdev-> Structure). Right click on the Process data object and create your variable. It's like setting a variable in Java. In short, answering your question, make the path opposite: find in your process of type "Customer Details", then go to your catalog Business, right click and change the definition to add what you need.

  (2) the human task will not update automatically (annoying). If you change the object itself, so you don't need to change your mappings because actually there the same object you are through the task as in / out argument. There are two things here: the human task and form associated with it (where probably change you the subject i.e. customer details). Go to the form (.jspx) - click on the tab links (by default, you are in the Design). In the links page, there is a link on top: "Page Définition File" (something like proj/pageDef/...xml). Open the XML file and go to the source. There you can add manually now all the attributes you need and that were not available before (i.e. dependent Client). It's a little complicated, but at least you don't have to recreate it. particularly useful if you have already implemented and subsequently form, you need to add more things (business is very good to say otherwise, "I would like to see something else in the form" ;)

  (3) project data objects are visible by all processes that you have in the project rather than the object of process data that are visible only to the method where you set the variable to. This means that you declare an object of data of the project once and then it will be available to all processes. Keep in mind that each process has a copy of it. In other words, it is not like a global variable that everyone sees. If edit you in a single process, other processes will not see the new value.

  I hope that I have answered your questions.
  See you soon,.
  Felipe

• Lightroom export - original file with the Lightroom change data

  Hello, Hello!

  I imported a file, for the sake of arguments, some JPEG files, TIFF and DND in Lightroom photos, leaving the files in place and just linking them to the library of the Lightroom Catalog. I then did a bunch of 'changes' to photos in Lightroom (the data of these changes are stored in the Lightroom catalog file, right?).

  Now can I export some of the photos from Lightroom so that the file that comes out is, in the same/different file format (e.g. JPEG/TIFF/DNG) and have the change Lightroom incorporated (perhaps in the EXIF data) data from the exported file? Can I then open it with a 'normal' program and have it show the original? Can I open it with Lightroom/Photoshop (?) so it shows the original with the change data applied?

  Thank you very much! :-))

  Now can I export some of the photos from Lightroom so that the file that comes out is, in the same/different file format (e.g. JPEG/TIFF/DNG) and have the change Lightroom incorporated (perhaps in the EXIF data) data from the exported file?

  Yes, but you must not export. Simply press Ctrl / Cmd + S to save metadata. the metadata will be incorporated into files. Note that the image will not be altered. In other words, if you view the jpeg format in an external viewer, you will not see adjustments made in Lightroom. Only Adobe products can interpred those.

  Can I then open it with a 'normal' program and have it show the original?

  Yes.

  Can I open it with Lightroom/Photoshop (?) so it shows the original with the change data applied?

  Yes. When you open in Photoshop, and it's a non - RAW (such as JPEG or TIFF) file, there is an option somewhere in Camera RAW to be used for the opening no-RAWs. The point is, those who must go through Camera RAW, instead opened directly in Photoshop, to correctly interpret metadata.

• Cannot change data values

  I want to change data in a view that joins multiple tables
  
  Change value window appears but I can't change the value
  
  I looked on the columns tab and UPDATABLE column is set to NO for all fields
  
  I tried to set the MODIFIABLE Yes field by clicking on the selection button
  
  again, a window for editing the value comes back but I can't change the value
  
  Help, please
  
  Thanks in advance

  Right, your point of view is not editable, and so you cannot place the INSTEAD - OF trigger or the other. Because you are unable to update normally, you can do anything in the place or the other. Catch philosophy?
  So, your only options are to open the underlying tables, so you can change them through the data tab or write the INSERT/UPDATE statements yourself in a worksheet.

  Kind regards
  K.

  PS: For a view to be updated, you need to have a 1:1 relationship with the underlying tables, so the UPDATE statement inherits the same key. The database is not so smart to find another.

• Replication with only changed data?

  We want to transfer changed data from Oracle to SQL server for Data Warehouse solution. It is one-way replication (from Oracle 10 g 2 to SQL server 2005). We are having about 100 tables that must be replicated with SQL server, but only changed(Insert,Update,Delete) data will be replicated.
  
  Please let me know if you have any suggestions on how can I perform this replication and what tools I use.

  Of course, the major challenge will identify changed lines. Assuming that you don't have a way to make his already (i.e. a LAST_UPDATED_DATE column in all tables, a table of audit, changes, etc.), Oracle provides a few different technologies to do this. For heterogeneous replication, I tend to focus on Oracle Change Data Capture (CDC), which publishes the changes in a table that your replication process can subscribe to. That also tends to be more conducive to the load of nightly standard an DW. You can also use Oracle Streams either using streams and heterogeneous services or by writing your own code to apply the XML representation of a CRL to the SQL Server database. If you need real-time data, it is probably the best solution, but for most applications of data warehouse, it is probably overkill.

  Once you can identify changed lines, - hand replication logic coding usually isn't too difficult. You can spawn probably most among the definitions of table on both sides (assuming these definitions to match). If you want to go out and buy an ETL tool, there are probably tools who can subscribe to CDC and push the changes to SQL Server. Oracle Data Integrator (ODI) would be the tool I'd look at first like most likely to be able to do. There are also third-party (i.e. Golden Gate) that sell software that mines redo logs and applies changes to all databases, but which tends to be quite expensive and a bit complex to install / configure / administer.

  Justin

• EliteDesk 800 G1: EliteDesk 800 G1 does not boot UEFI disks immediately after-&gt; UEFI BIOS change

  I am changing our configuration of the BIOS boot in the UEFI. I tried to simplify the problem.

  I boot via PXE BIOS of SCCM task sequence and perform following actions:

  1. Apply UEFI Secure Boot configuration with BiosConfigUtility (enable Secure Boot, boot which is ignored anyway... order)
  2. Fixed disk partition type as TPG
  3. Create Fat32 partition to boot EFI and an NTFS volume for the data
  4. Apply WinPE to NTFS and copy the boot (bcdboot) in Fat32 files
  5. Set the volume to Fat32 as ESP
  6. Reset

  Now BIOS does not allow me to start this disc. Disk appears in 'Device Configuration', but not in the boot order.

  If I start again to PXE (now in mode UEFI) and check the contents of the disc, everything seems in order. If I reapply my script to repeat steps 4 and 5, and then the next time the disc will apper in the boot and boot order.

  If before the first attempt of UEFI, I put in a known UEFI boot disk, the system does not start it no more.

  I think that there is a bug in the BIOS.

  I saw something similar with Z620. When to apply some config past to the BIOS, the system is no longer shows startup valid drives in the boot order (this attempt was in BIOS mode). Emulation of the RAID controller is switched back to AHCI has worked around him then. But this time I'm not emulation of the controller.

  As BiosConfigUtility reports that it has fixed start changes but when reading them back (before or after the restart, they are the same). It's not as important, but

  BiosConfigUtility 4.0.15.1

  BIOS final v2.68

  My repro led nowhere (successful boot) but I was hired by HP support and all by responding to their email, I accidentally found the question.

  My BIOS setup script was a command to disable temporarily BitLocker if configuration is repeated his request for a system that is already deployed.

  manage-bde-protectors-disable c:

  However, this had inexplicably FAT32 partition become encrypted. If I started to UEFI PXE SCCM WinPE on the next boot, silently erased WinPE encryption and system would be on hard disk again, causing confusion.

  But when, for a test, I booted a Linux LiveCD, it showed encryption.

  I guess it's been like this for a while but only in this case C: was be the UEFI boot partition (usually it's system partition). In hindsight, my repro of WinPE image have also components BitLocker...

  I deleted command BitLocker and now it starts normally on hard drive after the configuration change. Detective Conan for time to engage the support of Microsoft and HP...

• Alienware Aurora R4 will not save the BIOS changes

  Guy g ' Day.

  I recently changed on a motherboard in an Aurora R4 and now it will save some changes to the BIOS, but not others. For example, he remembers the time and if I set a supervisor password, but remember changes to the boot order.

  A battery low motherboard? Remember that your PC can be created automatically sync date/time on the internet so date/time are not necessarily an indication that the BIOS remembers those...

  You can get a better response if you re - post it in the forum of the Club of Alienware .