Inspiron 15 and Ubuntu 14.04: parameters of the BIOS change removes partion "ubuntu".

Similar Questions

• Cannot change the HARD disk parameters in the Bios on Satellite A200

  I can't change the hard disk parameters in the bios for my satellite A200-1The
  This bios does not support changing the parameters of the hard disk for example SATA to IDE?
  BIOS version is: 5.6

  AFAIK in BOS advanced settings you can change mode SATA controller only. You can use the AHCI mode or compatibility.

  I put t understand why do you think you can use IDE mode. What you want to do exactly?

• I have a Dell Inspiron N4110 and it says im connected to the internet, but I can't actually open things, what should I do?

  I have a Dell Inspiron N4110 and it tells me im connected to the inernet but I can't go online and for some programs, like steam for example, says that I have to connect to the internet. the only thing that I can open is Windows 64 bit, but I can't really do anything. When I try to do a syestem restore it tells me disk error C. Then I do a check disk. but that tells me error and do a system restore. Please help me boy Im only A 14 year HELP!

  -Thank you

  Cam

  Hello Cam,

  Welcome to the Microsoft community.

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  ·         What is the exact error message you get on the computer?

  ·         Were there any changes made on the computer before the show?

  Follow these methods and check if that helps:

  Method 1:

  Step 1:

  Check if you have the similar problem in safe mode with network, otherwise you can try to put your computer to a State of clean boot in normal mode and check if it works:

  Start your computer in safe mode with networking

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

  Step 2:

  Follow the article to perform the clean boot on the computer:

  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/929135

  Warning: After using the boot is a way to solve your problem step 3 follow-up to reset the computer to start as usual.

  Method 2:

  I suggest you to optimize Windows 7 for better performance and check if it helps

  Optimize Windows 7 for better performance

  http://Windows.Microsoft.com/en-in/Windows7/optimize-Windows-7-for-better-performance

  Please follow all the steps and if the problem persists, return back and we will be happy to help you.

• Parameters of the BIOS for VMware vSphere 6 & X 3650 M5 X 3550 M5

  I'm looking for the list of the BIOS settings recommended for high performance with VMware vSphere, ESXi 6.0U2 on M5 Lenovo rack servers. Any help would be appreciated.

  Hello

  I think this trick gives an idea of what parameters to look for, such as various energy saving features disabled.
  TIP H214692 unexpected of slowed performance VM in VMware
  https://www-947.IBM.com/support/entry/portal/docDisplay?lndocid=MIGR-5098137

  In addition, speaking in general.
  Use the latest UEFI firmware
  use image latest Lenovo personal ESXi
  Use the latest drivers

  Sure enough power and cooling

  Kind regards

• Satellite A300 and Centos Linux - EHCI: transfer of the BIOS didn't 01010001

  Hello

  I have a laptop Toshiba A300 - 211 PSAGCE.
  It has 32-bit Vista as the operating system.

  Now, it is dual bootable Centos linux with Vista and it does not start in Centos, displaying the message "EHCI: transfer of the BIOS has not (bug BIOS?). 01010001 "and it restarts automatically, without any statement by me. "Reboot" again and again.

  The same problem appears when loading windows 7 or windows 8. With windows vista, only it doesn't have problem. The only problem with Vista is that Skype does not recognize my toshiba webcam.

  My bios version is 2.2, and unfortunately, the TOSHIBA support site does not support the model of mylaptop with another more recent version of the bios. I tried to load the new version of the bios of other Toshiba A300 model, but my phone does not support the flash BIOS.

  Please help me! It is very important for my work to solve this problem.

  I wait anxiously for any help or idea or a new version of the BIOS.

  Kind regards

  Please give me a solution as soon as possible because I can't work!

  Thank you very much.

• Can not enter the parameters of the BIOS on Qosmio F60 - 147

  * Hello *.
  * Please could you help.*

  Toshiba Qosmio F60-147 have a brand of laptop. Yesterday, I wanted to put a password on the BIOS and the field "Set supervisor password" save the password I wrote and I recorded went with the F10.
  But then I want to enter is F2 during startup to restart when I press. I can't enter a kind of is. But I still can't connect is Bios Update. We don't have a problem with the windows open on my computer that I use without problem. Is why not glue only one question. ?

  * I turned on the computer, I press F2 until the Qosmio logo, but I can't enter the bios and resumes.*

  When you start your laptop can see you in the lower corner of the message display press F2 to enter the BIOS...?
  What happen exactly when you press the power button / stop?

• Win 10 Portege R700 and R930 works but wher is the BIOS?

  I installed W10 on my R700 and R930 successfully - but I have two minor I have questions can´t address:
  -I can not enter the BIOS - the road via advanced settings - start - troubleshooting - repair etc does not work. How can I enter BIOS in W10?
  -J' I try to update my Intel drivers through the Intel driver utility to update - but when I run this app - the App are not able to identify the Intel on my Porteges two drivers - how can it be possible? In the system information, can I see information about Intel processors - how is this possible?
  Otherwise W10 works well...

  / Anders

  Well - I found the answer to the first question - how to enter in Bios in W10 - energy options that you must disable the quick start - then you enter BIOS just taking the F12 to power. Worked on my two Portégé.
  / Anders

  I installed W10 on my R700 and R930 successfully - but I have two minor I have questions can´t address:
  -I can not enter the BIOS - the road via advanced settings - start - troubleshooting - repair etc does not work. How can I enter BIOS in W10?
  -J' I try to update my Intel drivers through the Intel driver utility to update - but when I run this app - the App are not able to identify the Intel on my Porteges two drivers - how can it be possible? In the system information, can I see information about Intel processors - how is this possible?
  Otherwise W10 works well...

  / Anders

• Can not enter the parameters of the BIOS on my Qosmio F30-112

  Dear lovers of Qosmio,

  Since I have updated Bios version 3.60 - winning, I'm not able to access my BIOS. I turn on my laptop while pressing ESC I get SYSTEM CHECK. Press [F1] to enter the bios. I press F1 , nothing happens, I pressed it several times the same thing. It's not like my Qsomio f30 - 112 made problems or anything else I want to be able to access my bios, who knows.

  Can you please help. by the way I tried 100 times > _

  Dear Hamid is very strange and at the same time stupid situation. I don't really know what the problem is here. Computers laptop Toshiba usually have 2 different BIOS versions. One is defined as Toshiba BIOS and secondly is Phoenix BIOS. Your Qosmio definitely has this version of the Toshiba BIOS and you can enter the BIOS settings using the keys F1 ESC.

  If possible try to call the service authorized in your country. If you can not enter the BIOS settings you need of some explanation expertise. If you will get some info useful please share it with us.

• Satellite A100 - BIOS and Windows does not start after the BIOS update

  Hello, I extend my Satellite A100 laptop BIOS.

  After update, I can't start my laptop and the BIOS will not start.

  You see the Toshiba logo?

  Was there a power failure when you updated the BIOS?

  Try to remove the battery and the adapter and leave for a few hours. You can also try reinstalling the RAM.

  If this does not help, you will need to send it to a Service Center for repair.

• Parameters of the BIOS for Compaq Mini 110 c - what are the default settings

  Hello - when I look in the bios for the compaq mini 110 c, it shows:

  Boot Priority Boot Device 1st - disabled Devixce

  When I hit enter then displays:

  SATAM - WDC WD1600BEVT-60ZCT1 disabled

  As I sat at a white screen with a cursor blinking with only the f9 and f10 options, I'm looking in the bios.  This information is correct?  If this is not the case, how can I change?

  Thank you.

  CAT

  Excellent - it worked!  Thanks for all your help - it starts now.

  CAT

• USB key not in Explorer and devices, but this Manager in the BIOS

  I tried troubleshooting, then also same problem continuesm, my pen drive icon is not there in "explore and Device Manager» but I checked in the BIOS, its name from s showing pen drive with precision.

  method 1.

  I deleted the UPPERFILTERS KEY in 4D36E967-E325-11CE-BFC1-08002BE10318, THEN I rebooted, but windows did not start several times, finally, I've recovered from systemrestore. When I have connected to the windows screen, I inserted the USB, but there are no ICONS, yet once I went and cross checked in the registry, EVEN UPPERFILTERS is restored.

  I tried above methods three times, but no use

  I use, CARD INTEL DG41RQ, INTEL CORE 2 DUO 2.93 Ghz PROCESSOR, bus front-end to 1066, TRANSCEND 800 Mhz 4 GB DDR2 RAM, SEAGATE BARRACUDA 500 GB 7200 RPM, OS is "WINDOWS 7 SP1 PROFESSIONAL."

  PENDRIVE IS TRANSCEND 8 GB CAPLESS COLOR VIOLET,

  PLEASE SOLVE MY PROBLEM OF USB.

  USB KEY IS DETECTED IN WINDOWS SERVER 2003 AND HIS WORKED FINE

  BUT IT'S NOT WORKING WINDOWS 7

  I shared your post from the old thread from your USB key is not lock up your PC as the SPÖ a. (previous thread: USB key works not on Windows 7, system hangs up and need to restart )

  You could try to save all the files on your USB key to another source and then try to reformat the drive on a PC that recognizes it (try formatting in FAT32 and NTFS to see if one or the other works) and check if your Windows 7 system can find it later.

• have 2 admin accounts and it is impossible to get the option to remove one of them

  I created for the administrator accounts and cannot get the option to remove one of them. I want to delete that won't give me the option to delete all it will let me do is change the password, it says it will allow me to change the picture, but when I try blank on the login screen is displayed. I can't change it even for standard user if I am logged in under the account of other admin. what I want to do is get rid of all my accounts and re-created them correctly like the one that I can't delete will sometimes pop up for password when I want to install something when I am connected with the other account.

  Is it possible to reset all our and start from scratch? I think it happened when I made some changed account policy local when I couldn't get a regular with my admin account setup program and now I don't know how to cancel it.

  I do not have to reinstall windows just to get this problem resolved... There must be an easier way.

  Thanks in advance

  Brenda

  For the guest account - I have a little poorly stated.  You * can * remove, but it is not recommended to perform this (possible to unintended consequences.)  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/deleting-guest-account/5a116d33-0056-47CA-B51A-b6615b90e160

  Administrator account - as far as I know you just cannot delete the built-in one.  Whichever one you can NOT remove - who is integrated. * smile *.

  Rename you accounts?  If not - it is one called "administrator."  Alternatively, you can use a registry setting to understand - but really the name should give it (if you have not renamed - and even if he did you rename... You renamed, you must know what you renamed to) the description of the account should be, "the computer or to the domain administrative account '...

  At the end of the day - you must remove only the accounts you know * you * created.  Ignore the rest.  Windows is/has been / will probably always be a multi-user even system when it is used by a single user.  He has accounts that are doing things in the background at almost any time.  Better than to let them be - unless you like instability.

  Whenever you install something (attempt to) as a normal user, it should appear and ask you an administrative level account - but you can select 'other' and put in ANY account of administrative level on this machine, you know the credentials. ;-)

• What PCI - E parameters in the bios I put?

  I was just in the Bios in Advanced tab and view the graphics settings is set to PCI-E x 1. my video card is dead and now I'm running on the chipsets integrated video card. I set this parameter to 'onboard' or leave it to PCI-E x 1? When I buy a new video card to change too PCI-E x 16?

  the PC seems to run very well on PCI-E x 1 on the onboard video in 1920 x 1080.

  Leave the setting as it is now... also when you install a new card. Install a new PCI-E card will automatically disable the edge.

• parameters of the BIOS E5530 Latitude

  Dell Hi, my name is Hamza... I ask how can I change the settings of the BIOS on my Dell latitude E5530 laptop because when I check the many BIOS settings is not editable. Thank you

  No, there are no manual assignment for video RAM.  If you have games that show errors about insufficient video RAM, the problem is that Intel Integrated GPU is not to play - in other words, they really need a system with dedicated video memory and a nVidia or AMD GPU - not the GPU from Intel you have.

• HP Pavilion g6: Pavilion goes directly into hibernation in Windows resume, and I can't go to the BIOS

  When I turn on the power, it goes directly to the recovery of Windows, and after it loads the user connection, it goes directly to the hibernation and it stops after a few seconds.  Since it is in Quickboot mode, it will not BIOS open with any method.
  
  I have Windows 7.

  How can I fix this, please?

  Apparently struck only the Windows key in the repetition while it's start, was the solution.