BIOS error

Similar Questions

• Satellite Pro M30 Bios error resource conflict - bios setting change or boot

  Hello.

  My beginning of portable satellite M30 with a bios error. The error that says "resource conflict, the bios setting change or start" If select 'start' the computer crashes before windows starts completely. I have remove the wi - fi and modem module and the same error message. I can't update the bios because the windows start. The bios version is 1.7. The laptop is the UK version. If select "Edit the bios", beginning of the bios but I can't find any resources management.

  Thank you

  (Sorry for my English, I'm from the Spain)

  Hello

  I think the bios error change setting means that you need to access the BIOS and should set the BIOS default settings.

  Please to do this, save the settings and try to start!

• Tecra S1 starts correctly but does not work properly and beeps from the BIOS error

  Toshiba S1 began to regularly plant after a certain period of use.

  Sometimes: BIOS error beeps: short-short-long.
  Sometimes: Blue screen of reduced resolution or screen size reduced.
  Sometimes: Just freezes (frozen) and must be turned off manually.

  Toshiba uses its own BIOS, no one knows what these sounds average beep or can provide support?
  It is a hardware / connection problem between map chart and monitor or is it an error of memory?

  Hello

  tried to do a memory test? If this isn't the case, I suggest you to do. For these tests, I would prefer to use "memtest86" (www.memtest86.com)
  Otherwise I guess that your motherboard is faulty and you need to bring your machine to a local ASP.

  If you need help to find an ASP, here's a good site:

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_gaspLocator.jsp?subs=TAIS

  Good luck
  Welcome them

• Compaq Presario CQ57: bios error 501

  What should I do to get rid of this problem?  Please help me someone.

  Welcome to the community of HP @ANAKONDA support,

  Thank you for joining on the HP's Support Forums! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support.

  I wanted to join you and help! I understand that you have a problem with an APPLICATION (501) BIOS ERROR on your Compaq Presario CQ57 laptop PC.

  Remove all USB devices. Disconnect all non-essential devices, because they can cause some problems.

  Try starting your laptop normally after having disconnected all. If that does not solve the problem, please continue with troubleshooting.

  The next step would be for you to try to restore the BIOS. You will see that the document says:

  If the BIOS of your laptop becomes corrupted, and a failure to upgrade the BIOS or damage caused by a virus, the computer can display all the following symptoms:

  • The computer displays the error message from the BIOS APPLICATION ERROR 501.

  After restoring the BIOS see if you can start the computer normally.

  Thank you for your participation in the Forums of HP where we want to help you as well as others who may encounter a similar problem that you have. Remember to mark this message as an acceptable Solution if it solves the problem for you.

  To show recognition for my efforts please click the Thumbs Up below.

  If you need assistance, I would be more than happy to continue to help you. Please re-post with the results of the resolution of the problems. Could you please also provide your model number (How can I find my model number or product number?)

  Have a wonderful day!

• PASSWORD OF BIOS ERROR CNU9423W4T

  PASSWORDS FOR BIOS ERROR CNU9423W4T? WHT is my password

  Try Fran's.

  e9lov7fdva

  3rd letter tiny L.

  4th letter lowercase O.

  Use this code to go into the BIOS.

  Disable all passwords that are enabled.

  IF demand for CURRENT password using this code.

  REQUEST NEW password just press ENTER.

  If asked to hit just to CHECK password to enter.

  Save and exit.

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• BIOS error 1 long and 2 short beeps

  Hello

  My Lenovo Thinkpad R61 laptop does not start and gives me those who emits a beep 1 long and 2 short beeps. I found that this beep code is a BIOS error reading file. How can I solve this problem? I try to clear CMOS. I found on the net for phoenix bios, it is possible to fix it with a disk, but I can't find the bios to support from lenovo with a file *. WPH. Anyonw knows where I can find? I really need my computer for work.

  Thank you

  Hello dp88, welcome on the Lenovo forums.

  Please check this thread:

• the HP mini 1000 CNU9162V02 bios error code

  My sister gave me a hp mini 1000 computer but it has a bios password and we don't know what is the password, bios error code is CNU9162V02 ive searched high and low for a solution, can someone please, if you know the correct for this error code, pllleeease... help me... Thank you for the wonderful people!

  Try Steve.

  e9lo3g7617

  3rd letter tiny L.

  4th letter lowercase O.

  9 is number 1.

  Use this code to go into the BIOS.

  Disable all passwords that are enabled.

  If demand for CURRENT password using this code.

  Request NEW password just press ENTER.

  If asked to hit just to CHECK password to enter.

  Save and exit.

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• Satellite Pro L670 - 14 p - cannot update Bios - error message appears

  Hello

  I downloaded the latest update of the Bios for the computer laptop afforementioned, and it is not allowing me to update. It says that I need to make sure that: Bios is not later than 210 (mine is 1.80), AC is connected (it is), and that the battery is greater than 10% fee (mine is 100%).

  I have tried everything I can think (update running as administrator, reset the bios by default, removing all power from the laptop for half an hour etc.) and I still get this error message?

  Does anyone else have this problem?
  Its got that puzzled me.

  Thanks in advance for any help!

  See you soon,.
  Craig

  Hello

  Did you install VAP (value added package)?
  If so, uninstall and update this tool. Once again install it and restart the laptop.
  Then try to update the BIOS once more.

  Good luck

• NB200 - cannot update the BIOS error 1072

  I can't upgrade to new Bios 1.90 for NB200, error 1072, could they do?

  Thank you.

  I m glad to hear that! :)

  I guess you have extracted the files from zip archive. This is necessary before starting the update.

• Re: Satellite L500-202 - Bios error! in front of HARD drive

  I have a laptop Toshiba Satellite L500-202.
  I tried to reinstall Win 7 on it, but I can't install it and display an error message from the Bios.

  In the configuration of installation a menu! in front of the HARD drive.
  What is the problem?

  Best regards
  Abbas

  Hello

  Please try to configure the default BIOS by using the F9 key in the BIOS.
  To access the BIOS F2 press immediately after the laptop is turned on.
  Then press f9 and save changes

  I recommend that you test the HARD drive as well... use a tool called 'Test of fitness Drive' for this...

• Satellite 1800-100: BIOS error message

  Hello
  I got a message when I turn on my satellite 1800-100.
  "bios (block3) is damaged (call your local Department of human)." "Place a maintenance disk in the drive and press to enter.
  I downloaded the bios and inserted in the drive. The laptop read the disk and successfully write the new bios, but when it restarted it have the same error message. So I need the MAINTENANCE DISKETTE.

  Thank you.

  Hello

  In my opinion, this disc has all the service partner. In my opinion, you should contact them. You will be very happy if a user has something like that especially for this device older (three years).

  Good bye

• Satellite A500 - cannot update the BIOS (error message)

  Hello

  I have a PSAR3A - 02U002 Satellite A500 with BIOS version 1.9 is installed.

  After reading several forums, I discovered that there may be a BIOS (v2.0) update available to resolve the current problem, these Satellites have with overheating cooling switch down.

  Excited, I have tried to install the new BIOS - this is what I get:

  "There is an error occurred, please check below the elements."
  BIOS version more than 200.
  Battery capacity more than 10%.
  AC is fixed. »

  First of all, my BIOS version is 190, no more than 200. Second, I find it very difficult to believe that the battery must be less than 10%. And third, I don't see what that remove the power supply cable will do.

  Please note that this update of the BIOS found on Toshiba's European website, but v2.0 claims to be a worldwide release. I then checked on the Australian site and there is no BIOS for my model. I don't know how to interpret this contradiction.

  Help, please!

  Hi umm_excuse_me,

  So I think that BIOS update is not available at this time for you. European and Australian models have different model numbers, so I doubt that the update of the BIOS is always the same. The pieces of equipment may also be different.

  In your case, I would wait until the BIOS was released on the page Australian too.

  By the way: where did you read that this update was release in the world?

• HP Pavilion x 2 removable: Admin password Bios error

  Error message 532563391 on bios admin

  Hello

  Try to enter: 42134919

  Kind regards

  DP - K

• small business of HP dc 7700: 1801 bios error after upgrading processor

  I upgraded the processor of pentium dual core E5200 @ 2500 Hz. After all biosupdates, I still get the error from the bios 1801 on the revision of the processor. The processor is now set to 2500 Hz, before the updates, it was 1800 Hz as the old processor was. But I can't get the error removed. Suggestions?

  added: the system is slow now.

  Hello:

  I could run the last update of firmware and see if that fixes the problem.

  Microcode update is a complicated business, but I simplified it for you...

  Tools you will need... usb flash drive of at least 1 MB in size.

  I have attached all the files you need below.  You will need to unzip them into their records.

  1. make the bootable flash drive.  Insert the flash drive into your PC and run sp27608.

  2 once the tool formats the flash drive and make it bootable, copy the contents of the folder BACK to the flash drive system.  All the contents of the file, not the file.

  3 copy the contents of the file in the folder BACK flash in the usb flash drive.  Once again, just the contents of the file, not the file.

  4 restart the computer, press the F9 key and select the USB in the list of bootable devices.

  5. the PC should boot from the USB and will take you to a command prompt.

  6. at the command prompt, type Flashbin.exe and press the Enter key.

  7 follow the instructions on the screen to update the firmware.

• T460s delay start-up and BIOS error message ' error sending end post message me HECI disabled»

  Hi all

  I just bought T460s in the website of sale at auction...

  After you install windows, I found several problem:.

  1 I can't update my bios

  2 the machine some time having the intermittent fan noise and restart by itself.

  3 I can't seem to update intel management engine firmaware

  So, I decided to return all the bios to factory setting...

  so my laptop is fine, but sometimes the laptop take a few momet to start and send the message:

  "error sending me end of message post HECI disabled.

  di decides to put my laptop to allow the lenovo Service Center:

  the technician suggest my Planar is a problem...

  but when I checked my machine detec system my warranty has expired...

  any suggestion is appreciated...

  This my thinkpad 3, my previus SL400 and T420 machine works great

  Thank you.

  If you can get into the BIOS, try to disable AMT (under the Security menu)

• the HP pavilion a6567c bios error

  Today, I installed the latest bios for my hp Pavilion. I followed the instructions but after I restarted it would give error 0x7B with which I figured out ways my bios is damaged. I would like to know if I can reinstall my bios or what I can do to fix the error.
  Thank you
  SID

  SID, you can certainly replace the motherboard.  However, if you can't find the exact motherboard, you should ensure that you confirm that the connectors are compatible with your components and case.