BIOS time / date zero when power is connected.

Similar Questions

• Time & Date stamp when sent

  I would like to create a function that would be time / date stamped my form at the moment it is sent.  I have a button designed for the PDF in a specific email email inbox.  Is it possible to time & date stamp this form at the time where the person presses the button send the form?

  He just sent

  Paul

• Internet LAN conection problem when power is connected - Satellite M70

  Hello

  I recenetly bought a satellite M70 - 360. For some reason, internet connection (LAN) only works when the computer is running from the battery to the moment where you plug in the AC adapter, it is cut (you can also hear that there is some type of distortion on the line when the power is on)-its impossible to conect to the net, even if you already have AC. Have searched all previous messages and found that another person has reported the same issue, but no one answered at his post... ideas?

  Would be very grateful for any advice.
  Mark

  Hello

  Very strange. Have you checked the State of LAN card in Device Manager if the captain was connected? A yellow exclamation point appears in the net
  Section of the cards to work?
  In the properties of LAN card, you will find an Advanced tab. There you can activate and deactivate some additional options. I think you should check the options and possibly allow it.

  You said that the internet connection does not work when the power adapter is connected. But what about connecting to the local computer network?

• BIOS time date stamp is 1999 after update 09:30 trade released in 2001

  The release of the bios date is 1999 after update 09:30 trade that is published in 30/07/2001.

  Is this correct, did the job of updating the bios? If yes why it displays the old timestamp?

  Rick

  Hi slumpie

  It's a very interesting question, but I really put t see any possibility to check it on the page of downloading if you n writing t which unit you have. In any case, it is possible that the date is not correct, but check the higher version number.

  If you want to do the BIOS update for the use of the largest number of versions and I don t see any problems there. It will also be interesting to know why you want to update BIOS at all. Is there a serious problem with your unit?

• T400 screen flashes when power is connected or disconnected

  Hi guys!

  I recently bought a T400. For the moment, it runs on Windows XP, Service Pack 3.

  After the installation of Windows XP, I installed all the drivers concerned and no yellow question mark appear in Device Manager Panel. However, during the process of installing these drivers, now whenever I plug into our remove the AC power plug, the screen turns off for about a second and then comes back.

  This problem was there immediately after the installation of Windows XP and Service Pack 3, that is before installing the drivers. I think it's a particular driver that may have caused this.

  Could someone help me with this? I tried to reinstall the graphics driver.

  Your video card moves the refresh rate when you change the energy sources.

  See your power manager and video card settings - I bet you on battery, you are ready for 50 Hz and AC, you're ready for 60 Hz.

• My iPhone 6 guard making his power on and off loading when it is connected with the MacBook Air early 2015

  Hi Please help me. My iPhone 6 retains what load noise when connected with my MacBook Air early 2015. It makes me crazy! I tried with several real Apple's USB cables, update to the latest iOS (phone and MacBook), updated the iTunes, clean the orifices, everything! I just got this MacBook on the Apple store. Please help me! Thanks in advance!

  Hi mikaelaridz,

  I understand that you just bought a MacBook Air in an Apple store, and when you plug your iPhone 6 in it, you are to hear a sound indicating that the connection does not work.  If your MacBook Air has a port USB - C, you must use the USB - C for Lightning cable to connect your iPhone.

  Using the USB - C port and adapters on your MacBook (retina, 12 inch, early 2015) and later

  Port USB - C

  USB - C is an industry standard generation that allows to load and transfer of video data - while a simple connector. Your MacBook comes with a USB - C port:

  

  Through this port, you can:

  • Charge your MacBook.
  • Power output.
  • Transfer data between your MacBook and other devices.
  • Connect the video output such as HDMI, VGA and DisplayPort.
  • Connect to other technologies, such as Ethernet.

  Port USB - C on your MacBook supports data transfer speeds to up to 5 Gbps (USB 3.1 Gen 1).

  USB - C for Lightning cable

  Apple USB-C for Lightning cable allows you to connect any device equipped with a connector of lightning with your MacBook. It provides data transfer and power of lighting fixtures. For example, you can use this cable to connect your MacBook to these devices:

  • iPhone, iPad and iPod touch
  • Magic Mouse 2
  • Magic keyboard
  • The Magic Trackpad 2

  You can also load these devices without using your MacBook by connecting to the C - USB to the lightning cable and plug the cable of the USB - C 29W power adapter.

  USB - C for Lightning cable supports data transfer at up to 5 Gbps (USB 3.1 Gen 1).

  This cable requires no power to operate. However, devices that you plug into it could draw power from your MacBook, you should unplug it when you're not using it.

  If this isn't the issue, then I suggest taking your new MacBook Air and iPhone at the Apple Storewhere you bought it.  A genius can inspect your computer for you, there is no hardware problems and staff can help you set up.  Here's how Contact Apple and make an appointment.

  Take care

• Why the last OS update cost me gigabytes of data when you are connected directly to my computer and ISP via Itunes February 29, 2016

  Why the last OS update cost me gigabytes of data when you are connected directly to my computer and ISP via Itunes.  29 February 2016

  While it is connected to ITunes via my Dell system, I was informed of the latest OS update for my IPhone 6.  I decided that the direct connection to the internet would be the fastest way to download and install the software.  During the process I started to have some warning of our AT & T account that I approach the limit of our data plan, then in quick succession, only warnings, said I've reached the limit and then passed in the data, limit charges.  At the time it was done, I had accumulated more than 2 gigabytes of additional data charges.

  Until that point, I was very pleased with the device and confident in the ability to use Wifi and data.  Due to this incident, I became very suspicious of the camera and the huge potential for data overcharges. It is extremely disconcerting as it happened while it is directly connected to the internet using my computer at home.

  Please note that, in the episode my ISP and the computer is remained connected to the WEB with no sign of connectivity issues.

  Someone at - he had a similar experience and understand what went wrong?

  Thanks for your support,

  Jerry

  JerrolK wrote:

  Why the last OS update cost me gigabytes of data when you are connected directly to my computer and ISP via Itunes.  29 February 2016

  While it is connected to ITunes via my Dell system, I was informed of the latest OS update for my IPhone 6.  I decided that the direct connection to the internet would be the fastest way to download and install the software.

  You have chosen the option of direct download, you have received a message of warning from AT & T about it yet.

  He did what you asked it to do.

• Time Date & keep refreshing in the BIOS

  Sorry

  I am new to Toshs so I don't know that it is a very simple problem. Keep redefine the time & date.

  It will hold in the BIOS for about a week and then must be updated again. I am upgrading the hard drive anyway, but don't want to start this without get in the way of this Issus.

  Battery problem?

  If the sounds

  I think that the RTC (BIOS) battery is not fully charged.
  In the manual, you will find information about the BIOS battery and how long it of necessary to load.

  I think you should leave the laptop running for approximately 12-16 hours on the AC adapter / CC.
  Then the RTC battery must be fully charged

  Good bye

• Internet decreases when it is connected to time capsule

  When my iMac is connected to my Time Capsule Ethernet, I can't connect to the internet at the same time.  If I unplug the ethernet cable from the TC, internet works fine.  I use the TC that for TM backups - I it was not connected to the ADSL router via WAN port.  This configuration has worked perfectly for about a year, then stop working and I cannot identify what has changed at the same time.

  Status light blinks orange if the cable connected or not.

  Status light blinks orange if the cable connected or not.

  Find out why by opening AirPort Utility on your Mac by clicking on the image of the time capsules

  Search for status in the small window that appears

  Click on the small yellow dot next to the State for more information on think the Time Capsule is bad

• I forgot my bios password please help when 3 times hit the code 99470161.

  I forgot my bios password please help when 3 times hit the code 99470161.

  Thank you

  Hello

  Enter: 26558167

  Kind regards

  DP - K

• Why the date and time is wrong when I start my computer

  Why the date and time is wrong when I start my computer

  CMOS battery die/of - usually about the size of a quarter on the motherboard of your system.

  It keeps things when you are not using the computer - if it starts to die/dies - then the time is no longer maintained.  Replacing, it is no different (in most cases) that replace the batteries of your TV remote or FOB car key.

• Force use carrier data when WiFi is connected?

  I have a random question, is it possible to use data (3 g / 4 g) when the WiFi connection is asstablished? Basically what the app to choose what data signal is the best?

  Again, this is something random I thought.

  Thank you

  Be based

  Already discussed.

  

• How to recover data from a response of connection when the connection is unknown(-1)?

  I use the following code to retrieve the data in response to a connection:

  long len = _httpConnection.getLength();
  is = _httpConnection.openInputStream();
  _data=new byte[(int)len];
  is.read(_data);
  returnContent=new String(_data);
  

  But how can I form a byte array, when the length is-1 if the response includes appropriate data.

  Any ideas / best way to get the inputstream?

  StringBuffer sb = new StringBuffer();
  while ((ch = is.read()) != -1)
  {
     sb.append((char)ch);
  }
  

• The battery on my Toshiba NB500 has not been charged since one should use it when you are connected to the power. The battery in the tool bar icon indicates charge but is always 0% available.

  The battery on my Toshiba NB500 has not been charged since one should use it when you are connected to the power. The battery in the tool bar icon indicates charge but is always 0% available. What could be the problem and how can I solve it?

  A problem better put to the support of Tosh or their forums, with regard to their equipment, not MS or Win

• I'm trying to convert a word doc into a pdf file (which I've done 100 times) but now when I connect and press 'convert' after selecting the file it gives me a error message that says "player doesn't have the ability to access this service?

  I'm trying to convert a word doc into a pdf file (which I've done 100 times) but now when I connect and press 'convert' after selecting the file it gives me a error message that says "player doesn't have the ability to access this service?

  Install and use Acrobat Reader DC. You can not use previous versions more.