Vista Windows freezing guard, does not and will not close properly

Similar Questions

• Windows Vista starts - Windows error message does not close properly

  Whenever I turn on my computer, I get a message that Windows did not close properly, even though I know that I went through the correct procedure when stopping down.  It started only in the last days.  I did not change my machine or installed / uninstalled something.

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows import program does not close after you import photos from a camera.

  Windows import program does not close after you import photos from a camera. It is frozen on the desk and the computer must be restarted to use the program again, windows does not detect a problem, how to fix it.

  original title: importer of photo and video for windows

  Hello

  1. which version of the operating system is installed on the computer?
  2. don't you make changes on the computer before the show?

   
  Method 1:
  You can perform a clean boot and check if the problem occurs.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.
  
  Method 2:
  Alternatively, you can change settings for importing pictures and videos in windows by following the steps from the link.
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-importing-pictures-and-videos
   

• Firefox does not close properly

  Hello

  A new problem with Firefox occurs today. After turning on my machine, I can open firefox. When I close it, it does not close properly and leaves a firefox.exe running process. I so can not re - open firefox without going into the Task Manager and deleting process. A reboot of my machine did not help

  https://support.Mozilla.com/en-us/KB/Firefox%20hangs
  See hang-to-output

• Tecra A7: After using Record now does not close properly

  Hello

  I have a problem with recordnow software on my new laptop Tecra A7. It does not close after that I have to burn a CD/DVD (recordnow.exe still appears in the Task Manager). It closes correctly when I open only and nothing is burned. The main problem is that I can't access my DVD - RAM drive until the recordnow.exe is closed by the Manager tasks. I tried to reinstall the recordnow software but it does not solve the problem.

  I hope that someone will help.
  Thank you

  Hello

  Thanks a lot for the power supply to the back. This problem is unknown and tells you some very useful information.

  Thanks again!

• Main catalogue does not close properly.

  When I try to close PS Lightroom in my main catalog, the program does not close and watch the ball skippy. I have to force quit the program under Mac OS x to close. This does NOT happen when a different catalog is closed. How can I solve this? I've already updated OS and LR latest versions. I reinstalled LR, but no change. It looks like a problem in my catalog. Thank you.

  Thank you for your help. The update today to 6.3 helped solve this problem.

• My Windows Media Player does not work properly

  Windows media player seems to have stopped working, I can listen to music and look at my photos, but when I drag some songs to the burn list, it does not burn, and when I try to burn my pictures, it will start to burn, then it stops, the drive opens automatically and it says no more to check the drive or to check the disc that I use. Help, please!

  Hello
   
  1. you have any CD/DVD burning software installed on the computer?
  2. did you try to burn a different CD/DVD or any other program to burn the disc?
   
  Method 1: Make sure that the CD - R or CD - RW drive is recognized as a recordable device
  To make sure that the CD - R or CD - RW drive is recognized as a recordable drive, make sure that the recording tab appears in the properties of the CD/DVD drive:
  1. click on start and then click on computer.
  2 right-click the CD - R or CD - RW drive and click Properties, and then look for the recording tab.
  3. choose the appropriate settings.
   
  Method 2: It is not usually necessary to adjust the burn speed unless you encounter problems at the fire; in this case reduce the burn speed may fix the problem. This setting applies to all burners that you use with your computer.
   
  Visit this link to change the settings:
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-settings-for-burning-a-CD-or-DVD-in-Windows-Media-Player
   
  Once the settings are changed, try to burn the CD/DVD and check the result.
   
  Method 3: If the problem persists, disable all non-Microsoft programs and try to burn the disc to cross check if none of the programs is the origin of the problem.
  To disable Microsoft not services, follow step 1 perform a clean boot: http://support.microsoft.com/kb/929135
   
  NOTE: Don't forget to follow step 7 reset the computer to start as usual
   
  For more information on the CD/DVD burning, check out these links:
  1 burn a CD or DVD in Windows Media Player.
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player
  2nd burn a CD or DVD in Windows Media Player: frequently asked questions.
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions
   
  Post back with the results, so that we can help you further.
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Quick Launch button remains constant and every time the computer goes into mode 'sleep' and wake up to the top, it does not close properly.

  Original title: MediaDirect problems

  I have a Dell Studio 1535 under Vista Home premium 32-bit. My computer has Media Direct installed, and lately the Quick Launch button stays on permanently. Whenever I put my computer in mode 'sleep' and then wake him up, I am presented with the problem of my computer being off does not correctly... How can I solve this problem?

  Hello

  1. What are you referring to whn that tell you immediately the Quick Launch button remains on constantly?

  2. are you referring to the Dell docking station?

  You can try to update the graphics card and check if it helps to solve the problem.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Also check out the Dell support link to download the drivers:

  http://support.Dell.com/support/downloads/DriversList.aspx?c=US&cs=555&l=en&s=biz&ServiceTag=&SystemID=STUDIO1535&OS=WLH&OSL=en&CATID=&impid=

  Hope this information is useful.

• APEX 5.0EA2 - Modal form does not close properly

  I have a master/detail form (detail lines are in a table). The part of the details pane, in turn, calls a modal form that allows you to edit the detail data. The modal form launches correctly and I can see the information it contains, with the right number of areas. The problem is when I use the buttons on the modal form to cancel or apply changes. It is supposed to go back to my original master/detail page. The weird part is that when I press one of the buttons in the modal window... all content in the window disappears... but the modal window itself remains visible on the screen. I have to press 'X' to close the modal window to return to my master-detail form. If this is supposed to be how it works, I find the very strange feature. You would think that if I am applying changes and/or cancellations out of the window that should clearly not only the content in this form, but it should also get rid of the window entirely. I don't think you should have to use the button cancel then turn around and press the "X" to close the modal window.

  I realize that some people would want to perform different functions within these modal windows, but it seems to me that when you perform an action such as the application of the amendments or by using the Cancel button, that you would like to close the window completely and take you from you. There may be a way to physically close the window (IE via javascript) so if anyone has any good ideas on how to do this, please let me know.

  After doing some reading, it turns out be the guy behind the keyboard. Apparently, there is a process of dialogue that should be used and this will be what I was looking for. For anyone else who is curious, see http://blog.iadvise.eu/2014/02/10/apex-5-0-modal-dialogs-have-never-been-so-easy/#comment-29067http://blog.iadvise.eu/2014/02/10/apex-5-0-modal-dialogs-have-never-been-so-easy/#comment-29067.

• Widespread problem "Firefox is already running" suggests it does not close properly - is Mozilla solve this?

  Several people including me have reported a problem when closing Firefox and then try to re - open. The message "FF is already running and should be closed... ' appears, but the taskbar does not display an active FF. At this point, it is necessary to use the Task Manager to close the old term.
  1 this not always the case on my computer has started recently.
  2. most of the time that it is indeed possible to open multiple versions of FF without difficulty. This problem only seems to happen if I close the first session and then immediately try to open a new.
  So my question is what causes this, not what workaround to usable solution when it occurs.

  1 both of these problems (ending to Firefox and restart) are a response

  http://dmcritchie.MVPs.org/Firefox/Firefox-problems.htm#close_firefox

  2. multiple versions of Firefox you have to use -no-remote on your combination of browser/profile not by default. Which cannot be by chance, so either you messed up in start parameters, or you didn't never have multiple versions of firefox running at the same time.

  • http://KB.mozillazine.org/Using_multiple_profiles_-_Firefox
  • http://KB.mozillazine.org/Opening_a_new_instance_of_your_Mozilla_application_with_another_profile

  Please mark "resolved" a response that will better help others with a similar problem - hope it was her.

• TestStand Simple OI does not close properly

  Hello.

  We need to build a test system that runs TestStand 4.2 and code modules are created with LabVIEW 9.0. The SW is running on a PC with Windows XP.

  We currently use TestStand Simple (LabVIEW version) User Interface to run the tests, and with the Interface of the operator we have a problem.

  If we use the file TestExec.exe provided with the installation of TestStand, everything works fine. But we need to make some modifications to OI and if we open the project file, and then recompile the IO, then the IO does not properly close. It seems the execution testengine stop and stop the VI, but the window doesn't go away until move us the mouse.

  When I open the LabVIEW project file informs me that the project was saved last version 7.1.1 and we now run 9.0.

  Can someone tell me what is now the window on the screen until there is activity on the mouse?

  I found a solution.

  But I'm still a little bit frustrated because I have no idea why it works...

  Anyway, if I open the vi for the OI Simple properties, go to execution and change the enforcement system preferred UI Standard, then the problem goes away.

• Elements of 10.0 does not close properly

  New PSE 10.0 installation. Mounted on an i7-920 with Win7 x 64. When I quit the program, the process, Photoshop Elements 10.0.exe * 32 continues to run. No matter how I try out the PES, the Red X, Close file, output file, all options of leave this process running in Task Manager.

  PSE don't re - will not start until I end the process still running in the Task Manager.

  I must say that this problem with PSE crashing regularly, does not leave a good taste.

  Any idesa getting PSE to close?

  Bypass the annoying screen by creating shortcuts to office for the organizer and editor.

  Editor executable file is:

  "C:\Program Files (x 86) \Adobe\Photoshop elements 10\PhotoshopElementsEditor.exe.

  Executable file of the Organizer is:

  "C:\Program Files (x 86) \Adobe\Elements 10 Organizer\PhotoshopElementsOrganizer.exe.

  The unwelcome screen leaves a zombie running process that prevents the actual program launch again.

  Ken

• Satellite L300D-13s - CD/DVD drive does not close properly

  Hello

  I have the L300D-13s, about a week.
  Today and for a short time last Sunday the DVD drawer is not closed.
  I rebooted several times and tried to put the disc in but again, she is ejected and does not read disks.

  I installed Norton 360 Version 2.0 the day I got it, I really don't know much about computers and I hope that it's fairly simple.

  I checked the control panel and checked all the settings and they all seem fine.

  I'd appreciate any help.

  Thank you.

  Hello

  I think it s a mechanical problem of CD/DVD disc and you should contact the ASP in your country for a control.
  I mean that the guarantee must be valid because this laptop does not seem to be old.
  Therefore ask the ASP, and maybe the CD/DVD drive must be replaced.

  Good bye

• Vista - Windows Update service does not work

  Windows Vista 32-bit sp2... Its said that for a while and I think I got malware or spyware, virus, because updates have been down.

  In addition to using an anti-virus, as Malware/spyware scan:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight...

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that thePerform full scan option is selected and then click on theScan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button toview the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/971058

  How to reset the Windows Update components?

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Windows Update Forum:

  It's updated operating system Vista, upgraded installation and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 8 - frequently does not work properly in suspense/questions

  I'm very frustrated with windows 8. It is not that there are so many problems; I had XP, I'm used to it. Frustrating, this is how it is difficult to solve or fix the problem. I spent hours online reading and download, the setting of the obscure details...  That's enough I was forced to buy this when they gave up that bad. I would like to at least it work. Here are a few things I do deal with - please help me solve this problem.

  1 Unable to access store.

  2. impossible to pass to 8.1 or add apps. (Yes, I paid for an upgrade key #)

  3 users, user accounts, user-difficult to browse access.
  4. incomplete or no windows updates.

  Hello

  In this case, I suggest to perform a refresh and then upgrade to Windows 8.1 Windows 8.

  It will solve the problems on Windows 8 as well as help us to upgrade to Windows 8.1 without any problems on Windows 8.

  1. You have a Windows 8 installation or recovery media?
  2. When you say you have a product key, it is for the 8.1 Windows or Windows 8?

  If you don't have a Windows 8 media, you can always create one by using the product key for Windows 8. Check out the link to do so:

  http://Windows.Microsoft.com/en-in/Windows-8/create-reset-refresh-media

  Note: you will need the product key for Windows 8 Pro to create media.

  To perform a refresh, refer to:

  See the section ""Rrefresh your PC without affecting your files".

  http://Windows.Microsoft.com/en-in/Windows-8/restore-refresh-reset-PC

  Note: Apps you have installed Web sites and DVD will be deleted. Your PC apps and the apps you installed from the Windows store will be resettled. Windows puts a list of apps removed on your desktop after you refresh your PC

  To upgrade to 8.1 Windows, refer to:

  http://Windows.Microsoft.com/en-CA/Windows-8/update-from-Windows-8-tutorial

  Please let us know if you have more queries on Windows.