bios update Pavilion a1340n

Similar Questions

• HP Pavilion 15-e017tx - button Wireless does not work after bios update

  Hello

  I have the HP Pavilion 15-e017tx for the past 8 months.

  Press f12 to this machine is shared by the key wireless button, which was working fine until there was a BIOS update last week.

  Now I try to turn off the wireless using this button it will not respond (light orange).

  I checked the Device Manager, there seems to be a problem with the driver.

  IF you have knowledge of this problem please let me know.

  Thank you

  Hello:

  The update of the BIOS should affect the driver wireless button.

  I would recommend that you reinstall as the unknown device is probably the one.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-123643-1 & CC = US & DLC = in & LC = on & os = 4158 & Product = 5389906 & sw_lang =

• The HP Pavilion a6560z bios update

  I have a HP Pavilion a6560z. Product #: KZ851AV

  I tried to upgrade the processor of double base installed to a phenom x 4 9550, that my research shows is compatible as long as I have updated the bios. I am currently running bios version 5.14 20/06/2008. My problem is the OS original on this PC is Vista, I erased this OS and now run Win 7. I found an update of bios, version 5.49 but she said do not be there except if Vista is installed. Will install this bios brick Council since its desingned for vista?

  I can't enter the bios with the 9550 installed but it does not start in windows. The bios shows that it is a blah blah Phenom quad core, so at least he acknowledges that, but when I try to load windows it says "the file is maybe damaged. The file header checksum does not match the checksum calculated. "I read that had a memory problem and tried 8 different sticks, all with the same result, so I thought it was a bios problem. Anyway, any help on a version of bios, I can try without bricking advice would be greatly appreciated. Even if its for Vista that I am always willing to try. This pc is not much of value. Thank you.

  You are welcome.

  oldhppos wrote:
  

  Thanks for the quick response. Last question, if I could somehow reinstall Vista (system recovery is not an option) and then perform the bios update I was able to install windows 7 and then continue with the new (er) cpu?

  I checked the page download software & driver of the computer for an update of the BIOS for Vista and Vista 64-bit.  It seems not to be available.  You cannot use a retail BIOS update.  Where did you find a BIOS update?

• Pavilion x 2 10-n155sa: bios update does not install

  HP Support Assistant on a new Pavilion x 2 detachable (10-n155sa) said that the needs of the (Doritos 2.0) bios updated. He is currently F04 and offered new is F06.

  I accept the option of automatic update and it downloads etc and to sit down again 'installation' for too long. The PC is not suspended and the update can be cancelled OK, to keep the laptop on F04. It seems not really 'out' at all and immediately cancels the installation (I expected to take a long time to regularize).

  The laptop is running. I tried several times now and just on the installation screen.

  Someone at - it ideas? Is there a problem with this update? Any alternative to the automated mechanism?

  Thank you

  KB10

  Hello KB10,.

  You try to update the bios through the HP Support assistant or you download the file directly on the site of HP?

  IF not, I'll try later.

  Here's the direct link... SP73945.exe

  But in all reality, If it's not broken don't fix it. IF you don't have problems with the bios, then do not update!

  BIOS update are a different animal than updating a driver. If something goes wrong, you have enabled your system in a brick.

  And the HP Support assistant says you need to update the bios is not because its necessary. Don't do that if its absolutely need.

  But good luck anyway.

• Pavilion a1547c bios update

  How do update you the BIOS on an a1547c office? I can't find all the links to the BIOS updates for this motherboard.

  Here are the specifications of your desktop HP Pavilion Media Center a1547c. Based on the specifications, this model uses the same motherboard that my HP a1632x. The last update of the BIOS is v3.11. Windows XP drivers and software updates for your computer can be found HERE.

  Please send Bravo

• Pavilion Media Center M8400f Bios Update for Windows 7

  HP Pavilion Media Center m8400f. The Vista operating system has been replaced by Windows 7 (64 bit) a number of years.

  I've updated one of my hard drives with a SanDisk SSD (it is now my main drive with the operating system and all my files on board).

  The bios on the PC has never been updated.

  The SanDisk SSD dashboard software will not recognize the SanDisk SSD as the system has designated the SSD as a SCSI device. I need to access the bios for this change to AHCI. The current bios does not support this.

  The PC has a card mother MCP61PM-HM. There is no update for Windows 7 BIOS for that motherboard I know (updates Vista only).

  　

  SanDisk gave me a link to http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-82094-1&cc=us&dlc=en&lc=en&... that shows a card mother M2P61PM-HM for m8400f desktop PC. This Bios download supports Windows 7 (64 bit).

  Can update the Bios to download safely a card mother M2P61PM-HM for card mother MCP61PM-HM I currently have?

  Hello

  The HP BIOS update link provided SanDisk is an update of the BIOS of your PC. It is listed under Win Vista 64 bit driver downloads here.

  If you look at the site to download the drivers for your PC you'll only see driver support for Win Vista but on 2010-04-08, Version 5.29, 1.47 M BIOS updatedshows support for Win 7.

  But the problem is this: the BIOS updates must be performed using the PC operating system comes with; in your case, Win Vista. Extreme care must be exercised when updating the BIOS under normal circumstances. I would not classify your situation as usual.

  I saw others download an update of the BIOS for their PC and try to install an operating system upgraded with disastrous effects. The PC was bricked.

  Be prepared for the worst case if you try to install the update to the BIOS.

  Jaco

  I'm not an employee of ch *.

  "" "" Please give a "Bravo, Thumbs Up" If the notice is relevant or "accept as Solution" to help other users of the forum having a similar problem.

  HP products:
  Office 810-150se (Win 8.1)
  17 t - j000 Notebook (Win 8 upgraded to Win 8.1)
  H8 1380t CTO Office (Win 7)
  560z Desktop (Win 7)
  
  Other PC:
  Laptop Dell Inspiron (Win XP upgraded to Windows 7)
  Custom build: (Win XP upgraded to Windows 7)

• HP Pavilion Elite HPE - 400z CTO: H - RS880 - Μatx Motherboard BIOS Update caused crash, to see a black screen now?

  I have a desktop HP Pavilion Elite HPE-400z running Windows 7 (64), my computer was working fine, however I thought that I needed to update the drivers and things from the HP website.

  The first thing I installed was the following: H - RS880 - Μatx Motherboard BIOS Update

  That restarted immediately frozen mouse on a black screen. When I turn on the computer the lights and the fan turns on but the screen remains black. Their is nothing wrong with the monitor, it's light is on, but when turn light it just says: "monitor going to sleep".

  I went through these troubleshooting pages: http://support.hp.com/us-en/product/HP-Pavilion-Elite-HPE-Desktop-PC-series/4269972/model/4300925/do...

  http://support.HP.com/us-en/product/HP-Pavilion-elite-HPE-400-desktop-PC-series/4269972/document/BPH...

  without success.

  Any other suggestions of what I could do to fix this?

  Hello

  Disconnect the PC and press and hold power for 30 seconds. Remove and replace the battery CMOS. It's a $4 item. Now let's see what happens. If no joy, then try the steps above once again.

  If your PC support has been changed or modified then put it back in its original state.

• HP Pavilion Notebook N9R33EA # a: problems with the BIOS update (HP Support Assistant)

  I was offered an update of software SP77359, which seems to me to be an update of the BIOS provided by HP Support Assistant. Version F.82Ap1. Two days ago, I updated the BIOS via the support and, on the report wizard got an other update via the support Wizard. I applied this patch to find that it was still an other BIOS update and now, which has been applied this third update has appeared. Please let know us how I do.
  
  The model number of my machine is actually N9R33EA #ABU (as reported by the Assistant to support) but ths was too long to type in the name of the product.

  Your laptop is a HP Pavilion Notebook - 15-ab208na (ENERGY STAR) for later use.

  I wouldn't update. Simply click the X to remove the download and install the list in the help Wizard.

  The current version on your laptop support portal is F.8.1

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-15-notebook-PC-series/8499306/model/8942501

• Pavilion 15-p246sa: BIOS update successful but cannot now access the BIOS screen

  The recommendation in HP Support Assistant I've just updated BIOS version f33, f34.  This succeeded and the Pavilion starts normally.

  However when I try pressing ESC at startup key is ignored and the trunk.

  How to reactivate the computer to respond to the ESC key and allow me to access the system configuration utility?  Have I somehow corrupt CMOS data?

  SOLVED!  I discovered the site of download drivers HP there is more BIOS updates for my Pavilion, the last being F.42.  So I installed this.

  At that time, it was possible to get the system configuration utility by pressing the ESC key.  However, it works a cold power upward, not reboot.

  Also the window by pressing the key is very short, some say about one-fifth of a second, and if you press two times you do not see the system configuration at all.  If some patience is required.

• HP Pavilion a1767c Vista Home 32 bit - BIOS update failed

  The unexpected happened by updating my BIOS, we lost the power.  Once the power came back, my machine was bricked.  I get the error of Checksum BIOS's Boot Blocker

  I did some research and found that I could re-Flash my BIOS so I could boot to a CD or a floppy disk.  I don't have a floppy drive, and after many attempts, I learned how to create a bootable CD with PHLASH16 and the extracted from the update of the BIOS ROM file that I had downloaded from the HP support site for my computer (sp37378.exe).  The question is the program flash will not read the ROM file that I've extracted from your exe file and I can't find the original file for the BIOS on the HP website.

  Am I right in thinking I can reflash my BIOS?

  Can you help me to loacate the worm/Date BIOS:

  Phoenix Technologies, 5.08, 12/08/2006?

  Thank you for your time and help,

  Ken

  From another thread, I started looking for a copy of the Bios file, I found my answer.  I tried to use the tool of phoenix bios when I should have used the bios awards tool.  You can search for "BIOS for Pavilion a1767c Vista 32 bit" for the full net.  Here is the comment that has saved my pc.

  Thank you all for your time and your help.

  Please try the file downloaded from the following link... some details are also provided in the readme files:

  https://SkyDrive.live.com/redir?RESID=1FFCCA6FE63FD77! 214 & authkey =! AOYevSziujFH8oQ

  I am an employee of HP.

  Kind regards
  Vidya

• 2330 Pavilion p6: p6-2330 bios update fails

  HP Pavilion p6-2330, I was warned by the HP Support Assistant I had a bios update available.  I clicked on it to start the process, and it downloads, etc. successfully, but when it comes to 'install' step, it turns a little, then returns the error 7, bios checksum error.  I tried this update in all imaginable ways (with all closed virus/malware scan software, since a prompt cmd, etc etc) and nothing works.   Help!

  Hello

  Boot into the BIOS and disable Secure Boot and save the changes. Then download BIOS update and manually install the update.

  HP Secure Boot Windows 8 themes

  I've noticed a number of positions when the Support Assistant for the BIOS update method seems to have failed or HP provided the wrong update of BIOS for the help Wizard to install.

• Pavilion 15-n010tx: HP 15-n010tx BIOS update problem - no internet. Help!

  Hello

  On how to solve the problem of Intel VT - X on the BIOS, even if I enable vt - x on the BIOS it doesn't allow me to install HAXM. So I decided to update the BIOS. My BIOS version was F.66 A. I checked on the HP software and the download page for the BIOS for HP Pavilion 15 - n010tx. He showed two results:

  http://support.HP.com/in-en/drivers/selfservice/HP-Pavilion-15-n000-notebook-PC-series/5401225/model...

  

  I downloaded the update of the BIOS to F.67 and used the Setup program to update my BIOS sucessfully. But then I noticed that I can not internet CCADE on Google chrome. So I decided to restore the BIOS. But on his way, I chose the version F.67.A himself to a restore to. this has changed my current versions and earlier BIOS F.67. I tried to install the F.66 A by downloading its download file, but does not have that, the update of the BIOS in the installer option has been disabled.

  Tried to install A F.66 via external USB using HP_TOOLS and create image files. But during the installation it management through Firmware utility, it says "Unable to BIOS Open File signature."

  

  Maybe if I can find the correct SIG file, it will be solved.

  I messed up a lot. My pc boots fine. Everything is going well except the internet connection.

  Any help will be appreciated. Thanks in advance

  Nikhil-

  Hi all

  I managed to solve this problem of "no internet Connection" after a BIOS update "F.67 has ' on Hp computer pavilion laptop 15-n010tx with W8.1."»

  I just checked in IDM for recovery of a file download and it said 'cannot open the Internet socket. I did some research on Google and resolved this.

  The Solution is to:

  http://forums.techguy.org/networking/745349-open-socket-error-no-Internet.html

  ------------------------------------

  Press Windows + R and type CMD and press to enter.

  At the prompt, type:

  netsh winsock reset catalog

  and

  netsh int ipv4 reset reset.log

  -------------------------------------------

  A response by message 'Avistor '.

  Thanks to him.

  and thanks to "erico" for the quick response.

  Best regards

  Spoiler (Highlight to read)

   

• Pavilion dv6-7029wm, do not boot after BIOS update

  Hello

  Here are the details of my laptop and the problem.

  Product name: Pavilion dv6-7029wm

  OS: Windows 7

  Error: Fail to start. Caps Lock flashing in 1-1/2 dry once continuous, red wifi light on. Power light and the battery light on, no flicker.

  Pre-grant changes: updated to the latest BIOS updates as well as 3 other updates; security etc.

  I've tried remove the battery, unplug adapter, start-up. It still does not work.

  Its only for 5 months I've had this laptop. Please help me.

  Hello again Sowmya_Harsha.

  Unfortunately there is nothing more I can do.  However, I've increased your case.  You should be contacted by a specialist soon.  They normally have with customers using the feature of private message on the forums.  If you don't know how to use the private message function, take a look at this thread. I wish you a great weekend!

• HP Pavilion XE763 BIOS update Release Notes?

  Work on the following machine:

  HP Pavilion XE763 with Phoenix BIOS revision of Basic 4.06 2.02 07/14/00

  ... and considering the BIOS firmware with this update:

  Dunidar wrote:

  I understand that you are looking for documentation of the HP Pavilion Cognac BIOS update. Unfortunately, the only information I can find on this update is located on the page I linked to you.

  I found the release notes.  Where everyone is looking to get this info, it's here:

  Technical release notes:
  ------------------------

  2.09 14/04/01
  (1) adds the control On / Off of FAN3 for rev b/j. H
  (2) support Simple Boot Flag

  2.10 20/04/01
  (1) changing the report option of CPU frequency for unlocked CPU (update of the standard rev 2.0)
  (2) edit the table above 1 GHz CPU speed

  2.11 07/19/01
  (1) display ID of FDI in manufacturing
  (2) fix error modem Cheetah under WinXP

  ... so it's not like they have added support for the USB boot.

• Pavilion p7 - 1236 s BIOS update

  Last fall, I bought a Pavilion p7 - 1236 s and have bypassed just to install a better power supply and graphics card (EVGA gtx 770). Unfortunately, when the card is inserted, I'm stuck in the position, given a few beeps and sent to a black screen. After having verified that the card itself works by testing it on another computer, I decided I have to do to update the BIOS. Currently the version is FRIEND 7.11. So, I checked the HP site for an update of the BIOS for the p7 - 1236 s, but could not find one. Is it possible to find a BIOS update, or am I just bad luck?

  Hello

  You always have the right size of power supply in the p7 - 1236 s to get the video card to work. It has nothing to do with the other PC that you test the map.

  I don't see any bios updates for your model displayed.  You would probably need the level of 8 bios version.  Check with the HP Support and see if there is an update of the unaccounted-for bios version 8 available.