HP Pavilion 15-e017tx - button Wireless does not work after bios update

Similar Questions

• Wireless does not work after Windows Update

  Original title: Wi - Fi internet connection is DISABLED since yesterdays upgrade, how can I get that back on?

  Since a windows update yesterday, before closing my laptop... I am not able to access the Internet.

  My without wire is off and I can't turn it back on.  Toshiba wants $99 for technical support.

  Hi Sheryl,

  Please join Microsoft Community where you can find the necessary information on Microsoft products!

  Wireless does not work after a windows update.

  1. what day that was installed?

  You can check the update in the update history:

  See the Windows updates are installed

  http://Windows.Microsoft.com/is-is/Windows7/see-which-Windows-updates-are-installed

  2. do you receive any error messages?

  3. What is the model of the computer?

  The problem may be with the drivers or with the device.

  I suggest that you refer to the procedure described in the site:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• router Wireless does not work after Windows Update

  I have a router WRT54G V.5. Windows Vista Home Premium did an automatic update. Now wired connection works, the Wireless does not work. Ask key, but when nothing happens. Action of diagnoses has been canceled. I disabled and enabled, does not. Any help will be appreciated!

  Take not of the Settings (SSID and WEP/WPA Key) wireless router...

  Know the wireless settings follow this link

  Once you know the wireless settings are attempting to connect to your wireless network...

  XP:
  Click Start and goto the control panel and double-click on network connections, right click wireless network connection and click Properties.
  Now, in this window, click on the second tab of wireless network and give a check mark on "use windows to configure my wireless" and then delete all network names present in the preferred networks window. Then click OK...
  Right click on the wireless again network connection and then click View available wireless networks and try to re - connect to your network...
  Now, it will give you the opportunity to put the network/wep key, make sure that you enter the correct network key and confirm...
  It will connect...

  Vista:
  Click Start > Control Panel > Network and Sharing Center > manage wireless networks, here to remove any present network and close the window.
  Click on connect to a network and try to re - connect to your network, he must ask for your key/password network, enter the network and password correct key and click on connect...
  It needs to connect... Once you're connected, you must restart the computer, it needs to connect to the Internet...

• Satellite Pro C850 does not work after Bios Update

  My satellite pro c850 cd does not work after updating the bios of toshiba.

  What should I do?

  Saying: don t work do you mean it does not fuel upward or what do you mean exactly?
  Flash the BIOS correctly?

  Maybe something went wrong during the upgrade, which means that l ROM flashed module isn't properly

  In most cases a special disc of crisis of the BIOS would be required to operate
  Not sure if you can get it repaired by your own
  Check this thread. Maybe this helps:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59637

  Otherwise you need help of the authorized service provider available in your country.

• Satellite L735-103: one key does not work after BIOS update

  Hello

  I got a Sat L735-103, part no: PSK0CE - 00N0OUEP and I download the bios for this pc, toshiba Web site.
  I have updated bios with no problem, but now a realization thatm a key (the key located in the good of "* f ' and 'z') of the keyboard does not work.
  I have a plate with windows and linux, and the result is the same.

  Maybey I need to go back to the old bios, but in the toshiba Web site only have a bios download: (.)

  Hello

  Somehow, I can't believe that this button malfunction has something to do with the new BIOS.
  Have you noticed the anomaly key immediately after the update of the BIOS?
  You have default BIOS? If not, access the BIOS by pressing F2 when starting the laptop.
  Here, you can set default BIOS and then save the changes.

  If this is not enough, I would recommend contacting the Toshiba ASP because the technician must check whether the button is defective. In this case, replace the keyboard. The technician would be able to downgrade the BIOS as well and could check if it of really a BIOS issue.

  To find an authorized Toshiba (ASP) Service Provider anywhere in the world, please visit:
  http://EU.computers.Toshiba-Europe.com--> "Support and downloads"--> "to find an authorized service provider" (down in the menu maintenance & repair).

• Satellite L750 - Bluetooth does not work after BIOS update

  I am preparing some L750 notebooks for use and accept updates from the Toshiba, which included an upgrade of BIOS v1.70 for v2.00. He appears after this update occurs that Bluetooth no longer works, i.e. try to install Bluetooth Toshiba stack will fail as it is said that the Bluetooth radio is disabled and must be turned on for continue.

  As the L750 (model PSK1WA-0C300R) is not a hardware switch to enable or disable the Bluetooth/Wi-Fi, the only option available (Fn + F8) is unsuccessful. I ran a recovery of factory default installation and Bluetooth still does not - resumption of classes does not restore the BIOS to the previous version. I have 5 of the model and confirmed the update of the BIOS is the cause. Two laptops now have v2.00 and Bluetooth has been tested in the work before the update of the BIOS.

  If Bluetooth is not critical for the environment which I deploy these notebooks, it's an annoyance I want to solve. My questions are: has anyone encounter the same problem and managed to resolve it? Is there a BIOS v1.70 available for download to restore the functionality? Y at - it an update of the BIOS > V2.00 for solve the problem I have? Thank you.

  Hi JasonL750,

  Load default settings after updating the BIOS? Go into the BIOS, press the F9 key to load the default settings of the installation. Also, make sure that Bluetooth is enabled in the BIOS if there is such an option.

  In addition, it would be interesting to know what happens if you use the FN + F8 key combination. Don't you see that he has an option to turn on Bluetooth and if so what happens if you do this?

• Satellite A300-20 b - Touchpad does not work after BIOS update

  I've updated the BIOS on my Satellite A300-20 b latest version 2.00. Update succeeded, but when I rebooted system touchpad has stopped working.

  I tried to find the solution, resettled drivers (windows XP system). In the Windows Device Manager there is no problem with Synaptics PS/2 Port Touchpad, I see. Software Synaptics shows no problem I can enable and disable the touchpad, but it does not work for the touchpad. I tried Linux live CD and in this system does not work as good touchpad. I think there is problem in this version of the BIOS.

  Does anyone have the same problem?

  Hey Buddy,

  Have you tried to turn the touchpad on or off if you press FN + F9? Check this please!
  Also, try to load the default settings in the BIOS.

  What happens if you connect an external mouse to the laptop? It work?

  I can t imagine that the BIOS update causing this problem. If it doesn't work, you need to contact a service provider for help. They can check the touchpad and replace.

• Satellite A500-17 x - micro does not work after BIOS update

  I have a Toshiba Satellite A500-17 x which I have just updated the BIOS to version 2, as recommended by the tempro software. Now with the new update my microphone does not work. Where can I download a copy of the old BIOS?

  ({I used winphlash64 in advanced mode to restore the original backup, it does to the computer, but it just gives the new bios to}) Thank you rich

  Hello

  BIOS cannot be demoted in windows mode.
  Even if you use an older version of BIOS update, you will get an error message saying that the latest BIOS version is already installed. So, forget the downgrade.

  By the way: I put t think the update of the BIOS assigned the microphone.

  Go to control panel of-> sound-> recording tab.
  Here you will see all the available recording devices (micro)

  Activate the microphone it (in this case the people with reduced mobility) and set its default value.

  Where it works: reinstall the audio driver.

• Re: NB520 - buttons on the touchpad does not work after BIOS update

  Got my NB520 yesterday and installed all windows updates, and then the BIOS updates proposed by the action center of Toshiba and after that the two touchpad buttons have stopped working.

  They did before. Any ideas whats happened, this is the update of the BIOS?

  I put t know if its the related issue of the BIOS, but if there is no way to get buttons working again I recommend you reinstall the OS using the recovery mode. Test the functionality of buttons with the factory settings.

  By the way: touchpad works properly?
  You can use an external mouse correctly?
  Have you checked all the settings of the touchpad?

• shortcuts FN does not work after bios update?

  I have a laptop HP Envy 14 with Win 7 Ultie 64 bit installed. I recently did an update of the BIOS via the HP Support Manager and subsequently, my fn shortcuts no longer work (such as fn + F9 to silent volume, etc.). I guess it's a problem with the startup services, but I'm not sure which one is for shortcuts. Can you point me in the right direction?

  Thank you!

  HI, you can adjust the behavior of the key FN in the BIOS.

  Reboot and press "F10".

  Use the arrow keys to highlight "System Configuration"

  go down to "Keys of Mode" and change the setting.

  By default, the setting is on Windows, press the button performs the action. for example on my device to mute I can press F11. Pressing F11 in itself does not send the signal for 'f11' for Windows. (Another example is that F5 on the old PC is normally to refresh the Internet Explorer page. On the units again default is some special action is related to the F5 key)

  If you change this setting, you need to press FN + F11 to turn off the sound, but by pressing F11 by itself will now send the command 'F11' for Windows.

• Satellite X 200-20 s - LAN does not work after BIOS update

  Hi all

  I've updated the BIOS version 2.7 and NIC LAN just disappeared from my list of device. The wireless network card works fine however. When I plug the ethernet cable, the green light turns orange not, so I guess that it is not broken, as it worked fine before the BIOS update.

  I tried different drivers lan Windows XP and still nothing. Any ideas please?

  I have Windows 7 x 64 installed.

  LAN option is listed in the BIOS boot menu?

  If you have tested with Win7 and WXP maybe you should do finally test and install recovery image original Toshiba that you got with your laptop and see what happen when you use the laptop with the factory settings.

• Satellite Pro L100 does not work after BIOS update

  Okay, the computer is a Toshiba Satellite Pro L100 PSLA4. Problem occurred during an update of the BIOS on the official website of Toshiba. I downloaded the zip file, it extracts and activated the .exe file at the Interior.

  The window opened by the .exe is a program flashing BIOS, the .exe wrote at the same time a new BIOS file to a temporary folder.
  When he tried to use the program I got was an error saying it couldn't find the new BIOS to the entrance.

  I tried again only to get the same error. Then I left the laptop for several minutes and when I got home, I found a laptop no longer Virgin.
  On which I hear by an obvious lack of BIOS functions i.e. power LED does not change when the connection to disconnect it from the power outlet and the fact that I had to take out the battery to turn off the machine. When the power is turned on now it is check readers and restarts (no display, no beeps)

  What should I do?
  The first thing that comes to mind was to reset the BIOS.
  A problem, I can not find the RTC battery or a rider switch.

  Hi George

  I can't tell why it happened, but I can tell what happened.

  In my opinion, something went wrong during the process of updating the BIOS and the ROM modules was not writer properly.

  Simply says the BIOS update procedure has failed.
  In this case, you will need to contact the ASP in your country for a fix
  The technician must be able to rewrite the ROM module and updated the BIOS again.

  Good luck buddy

  See you soon

• Equium A60-173 does not work after bios update

  Computer laptop girls. A lot of windows screen blue/broken files. Who sets. Site Web de Toshiba says 1.8 bios c can stop it again - Web site also announces 1.90 bios. To go with this...

  Tried to Flash the Bios 1.90 which you have to do in the (stupid) windows. Naturally it hangs during the "preparing for the bios update", with only 15% of progress. WAITED a very long time (30-45 minutes) - no progress took place. Had to turn off the machine and had clearly not worked.

  Now the machine will even not respond to the switch. I was expecting a momentary start - but it's like the power switch has been disconnected. Actually attaching the power supply does not even turn on the power light!

  Can a flash failure turn off the machine so much?
  Or would it be another fault (as well!)?

  Thanks for the tips...

  > Not waited a very long time (30-45 minutes) - no progress has occurred. Had to turn off the machine

  Looks like you broke upward from the procedure of updating the BIOS and it's deadly!
  I put t see any other possibility as to contact the ASP in your country for assistance!

  Maybe you are a lucky man and module ROM on the motherboard is not damage and must be flashed only
  Please note that the update of the BIOS is risky! If you use an incorrect BIOS or update wrong procedure can damage the MB

• brightness key does not work after bios update

  Hello. I have laptop 650 hp, everything has worked until I have updated the bios after this brightness keys don't work. I tried reinstalling the drivers, restored, updated the bios, hd formatted, installed windows and drivers the latest and still nothing. all other keys work fine. checked the buttons, they all work, it's just the brightness function is not working. Thank you.

  the version the older BIOS, now his market not :/

• Satellite C55-A-16Z - graphics card does not work after BIOS update

  Hello

  I have a portable Satellite C55-A-16Z with windows 8 and a Nvidia geforce 740M graphics card.

  Last week he asked me to update the version of the bios at 1.30.
  The bios update was successful.

  However when I restarted my laptop I started having a BSOD dgxkrnl.sys.
  Correction of the error and restarted for an another BSOD Windows, and after the second solution, I stopped making BSOD.
  But now, I noticed its games running, if not use the dedicated card, but use the 4000 Intel.

  In the settings Nvidia dedicated card is configured to be always on.
  It seems that my card is missing, but it appears in Device Manager.
  I tried to delete, update the drivers and the default factory reset, but nothing helped.

  Also, when I go into Options power the Intel card is listed and when I disable the card intel in the Device Manager it starts to use the graphic viewer for windows.

  How can I get my Nvidia card to work again?
  Any help is appreciated.

  Thanks in advance.

  Hello

  After the BIOS update the BIOS should be set to default settings.
  You can do it in the BIOS.

  In addition, you mentioned that Windows 8 is still installed on your laptop.
  8.1 to win has already been published by Microsoft and I highly recommend that update you the system of 8 to 8.1 Win Win.

  Before you start the upgrade to 8.1 win, you should check and read the instructions step by step for Toshiba: http://www.toshiba.eu/innovation/generic/windows8_1-message/

  I guess that after the Win 8.1, nVidia graphics card upgrade works well also.

  Your comments would be greatly appreciated.