Bios update Presario V2000 - can not find the model listed

Similar Questions

• Vision project of OR can not find the model after migrating to labview.

  Hello
  My problem is the following. I did a project with the vision Builder of NOR. Well, it works fine. BUT, when I migrate this labview project (and after that, I build an executable version) it can not find the model on the selected images. (Yes, I use the program with images, not with the camera.) What should I do? I tried to put the models next to this project, but it did not work.

  
  

• Can not find the model of hermetic Postcard Viewer in the Web Module

  I have 6 of Lightroom, and I can't find the hermetic Postcard Viewer in the Style of page layout in the Web Module?  It's probably something really stupid, but it seems to be the lack. grrrrr any help appreciated. Thank you

  Airtight galleries used Flash, which has been withdrawn from Lr6

• Update iTunes errors, can not find the file iTunes6464.msi

  Try to update iTunes on PC.

  Windows 7 (64-bit) with Intel i5 processor.

  During an update of base, update errors trying to find the file "iTunes6464.msi" he says is not available.

  I tried to delete all the software Apple on PC, but the file final iTunes will not uninstall because of the same file.

  The new apple software download now error with the same error.

  How can I solve this problem?

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  Start by missing error MSI.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Can not find the updated driver for Intel PRO Wireless LAN 2100 3B for R40

  I can't find the good updated software listed for my R40 on the Lenovo site. The Device Manager shows my card wireless as:
  Intel PRO Wireless LAN 2100 3B Mini PCI Adapter but I can not find the model listed in the update list.

  My R40 description is by Lenovo site is:
  Product: ThinkPad R40 2897 B4U
  Operating system: Windows XP

  Original description: P M 1.4 GHz, 256 MB RAM, 40 GB 4200 RPM drive HARD, XGA(1024x768) 15 TFT LCD, 32 MB ATI Radeon 7500, 24x10x24x/8 x CD-RW/DVD, Intel 802. 11B wireless (MPCI), Modem (CDC), 10/100 Ethernet (LOM), UltraNav, Secure Chip (TCPA), IEEE 1394, 8-cell Li-ion, WinXP Pro

  Lenovo driver update page, I have the following choices:

  Network: R40, R40e wireless
  (1) mini PCI driver of cisco Wireless LAN

  (2) high rate Wireless LAN Mini-PCI Adapter III
  Note: The models ThinkPad R40 2681, 2682, 2683

  (3) dual-Band 802.11ab and 802.11abg wireless LAN Mini PCI adapt

  (4) Intel PRO/Wireless LAN 2100 3B Mini PCI adapt
  Note: The models ThinkPad R40 2722, 2724 only, 2723

  My card is listed for models 2722 2723 and 2724 ONLY.

  Here is the direct link to the driver page http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-46024R40.

  Device Manager shows that I currently have the Intel of the installed driver version: 07/03/2003, version 1.1.5.0

  Can anyone help on what version of the software update I should use?

  Welcome to the forum!

  Here is your wireless driver:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo&lndocid=MIGR-59438

  After you download it, make sure you unpack it in the following directory: C > drivers > win > Wlanint

  I hope this helps.

• "windows can not find the new updates" when you click check updates

  Hello, I'm sorry for the confusion caused with my previous post. The error I got is 'windows can not find the new updates' when you click check updates. It displays a notification to install the new updates on the desktop and displays the 80072EFD error code. Please help me to get this resolved. Its 32-bit windows 7.

  OT:

  Windows

  First, update your anti-virus software and run a scan completes. Then:

  If you have not already seen it this article, it may be interesting to read through to check it out - http://windows.microsoft.com/en-us/windows/windows-update-error-80072efd#1TC=windows-7

  If it still fails to run the resolution of the problems of Internet connection (from Control Panel) and see if that finds & correcting something. More details here - http://www.dummies.com/how-to/content/how-to-troubleshoot-windows-7-internet-connection-.html

• X 1 carbon Touch Fingerprint reader 'can not find the fingerprint sensor device' e7210005

  Hi all

  I have spent far too long trying to solve this problem by myself and need to reach out to someone who may have solved this problem. I read tons of questions similar online and restarted from dozens of times after trying many different things.

  I have a carbon 3444-GCU Touch who can not see his fingerprint reader. It used to work when it is brand new, but after many updates from lenovo and windows, it now does not work:

  

  I'm on Windows 8.1, with all updates.

  No problem in Device Manager.

  Coprocessor (WBF advanced mode) Fingerprint TouchChip installed under thin biometric devices.

  _Not_ power management value disable device to save power.

  The bios is 2.61.

  I suspect that the problem is very low, because even the BIOS can not find the device trying to implement.

  If I have the lates BIOS, but it can't see the camera - what can I do?

  Thank you all...

  you have a faulty drive.

• Cannot install Windows XP on my Probook 4520 s in mode ACHI... can not find the correct drivers anywhere!

  Hi all!

  I'm a newbie here, please help me. Just bought a new laptop, 4520 s and can not install windows in AHCI mode. Very strange things are below:

  -I'm reading on this tread: http://h30434.www3.hp.com/t5/Operating-systems-and-software/No-SATA-AHCI-drivers-for-6440b/td-p/2592... And I havea even question...

  -Have these:

  PCI\VEN_8086 & DEV_3B2D. DeviceDesc = "Intel(r) 5 Series/3400 Series Chipset Family 2 port Serial ATA Storage Controller - 3B2D.

  PCI\VEN_8086 & DEV_3B2E. DeviceDesc = "Intel(r) 5 Series/3400 Series Chipset Family 4 port Serial ATA Storage Controller - 3B2E.

  Hardware items, but can not change driver PCHM SATA AHCI Controller 4 Port or Port 6 ...  BSOD and reboot even when...

  -tried to find out all the correct drivers, no results...

  -When it is used the nLite and running the Windows installation again with ACHI (setting in BIOS) mode I just receive this message in the first minutes of blue screen: can not find the ACPI. SYS... Press a key to reboot.

  Help me please guys, if you can.

  Thanks in advance, Peter

  I had the same problem and now works properly. That's what I did:

  1 position (BIOS) setting to IDE compatible mode

  2. install XPP as usual.

  3. install the drivers for the chipset Intel (sp46692)

  4. download and run softpaq for Intel Matrix Storage Manager (sp45106)

  5. go to the controller Start > Run > devmgmt.msc > IDE ATA/ATAPI

  > Port controller 5 series/3400 Series 6 Chipset

  6. set to update manually the folder c:\swsetup\sp45106, with option "have a disk.

  7. Select "PCHM SATA AHCI Controller 6 port".

  Windows says it is not compatible, but it will be restarted from the nest

  8 restart the computer, and set its mode controller SATA (BIOS)

  9 complete! Windows does not boot ok

  I hope you understand my instructions: English is not my mother tongue and may be poorly written. In any case, it worked for me.

  Miguel.

• HP Pavilion g6-1310ea: can not find the ethernet controller driver

  I reinstalled Windows on my HP Pavilion g6 - 1310ea and can not find the drivers for the Ethernet, PCI Device and SM Bus controller controller. There seems to be no more this kind of drivers on hp suupp.

  Hello:

  I can't even to the driver page.

  Here are the drivers you must however...

  Ethernet controller: download and install the 2nd driver on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 14 & PFid = 7 & Level = 5 & Conn = 4 & DownTypeID = 3 & getdown = false

  PCI device: Download, unzip and run the exe file to install from the first item on the list at the link below...

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 15 & PFid = 25 & Level = 4 & Conn = 3 & DownTypeID = 3 & getdown = false

  SMBus Controller: This is not on the driver page even if it worked...

  I zipped and attached to the driver that you are interested in below.

  Download and uncompress the file in its folder.  Don't do anything with the files in the folder.

  Go to Device Manager and click the controller smbus who need the pilot.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the driver folder, that you unzipped.

  Make sure that the include subfolders is selected and the driver should install.

  Then restart the PC.

• @ sign is the captial lock + 2 How can I change this - also can not find the sign of the pound sterling

  I had my computer updated and the keyboard acts weird, I know that this can happen, but I can't find where to change it.
  The sign @ is capital lock + 2 and I can not find the sign of the pound sterling.  The dates where the American MM/DD/YY, but I managed to change it, but can not find where to change the keys on the keyboard.  Help would be appreciated.
  Thank you
  Jenny

  Hi JennyBrightwell,

  1. how you accessed the pound sign before on the computer?

  2. where you using a third party program for characters to work?

  3. What keyboard layout you have defined on the computer?

  4. What is the serial number and model of the keyboard?

  5. what you up to date on the computer?

  I suggest that you check if the problem persists when using on screen keyboard on the computer and the post with the result back.

  Keyboard on the screen overview

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/osk_overview.mspx?mfr=true

  Using the character map

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/app_charmap.mspx?mfr=true

• DVD player, install the game, but can not find the CD to play

  This happened recently with all my games. My DVD Player recognizes that theres a CD/DVD in the drive and install without problem, but when I go to run the game after the installation, it asks me to insert the CD/DVD in the drive, or can not find the CD. any suggestions? already I've updated my DVD player, it's out of the question. only, he began doing this a few days ago

  Hi Ubergringo,

  1. What is the brand and model of the CD/DVD device?
  2. what game you are trying to install and play?
  3. are you able to view the contents of the CD/DVD using Windows Explorer?

  Please provide us with more details on the issue, so that we can better help you.

  If the problem is with the games Microsoft, then try the steps mentioned in this article.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• can not find the product code

  My computer is locked and since we got it fxed part of my microsoft programs don't work. I try to put in my update for windows vista, but can not find the product code and the phone number here has too many numbers.

  Here are the different ways to try to find the product keys:

  http://www.Belarc.com/free_download.html

  http://www.magicaljellybean.com/KeyFinder/

  If your Vista is a functioning and activation of operating system Vista, use either of the program above to find out what is your product key.

  If a desktop computer: look on the side or the rear of the case for a sticker

  If a laptop: look for a sticker on the underside.

  The sticker will contain 25 digits, divided into 5 groups of 5 digits.

  Look on the packaging in which it came.

  Or contact the manufacturer of your computer.

  This is all the help we can give you about a lost product key.

  See you soon.

  Mick Murphy - Microsoft partner

• Can not find the handle!

  Hello

  I am updating an application and it works well in 5.0.But he can not just run under althougth 5.0, its icon appears in the home screen.

  All modules does not appear to be loaded compeletely.

  DEBUG:

  CodeStore.DependencyList.reset () - can not find the handle of the name update_1000-1

  CodeStore.DependencyList.reset () - can not find the handle of the name update_1000-1

  CodeStore.DependencyList.reset () - can not find the handle of the name update_1000-4

  Thanks in advance

  What version of BlackBerry Java SDK or BlackBerry JDE do you use? See the link below for information on compatibility.

  http://supportforums.BlackBerry.com/T5/Java-development/appropriate-version-of-the-BlackBerry-JDE-an...

• BlackBerry smartphones can not find the BBM icon...

  I can't find my icon of bbm anywhere, even not in the bar to switch applications. I was updating it from app world blackberry, then the progress of update has failed. bbm icon was there until later that day, I deleted something and the phone was in need of a reboot so I rebooted it and since then I can not find the icon of anywhere. I tried to download it again from the appworld, it always says that there are already, but I can't find it yet. and I'm also trying to update nd it always says error update! Please help me!

  OK, so just do the last part of the instructions...

  Finally, use your BlackBerry browser to go to http://blackberry.com/blackberrymessenger and download/install again the Messenger application.

  After installation and reboot if necessary, check your instant messaging, or downloads of the application folder.

• Can not find the downloaded file

  I regularly download files, and they will 'always' in the same directory. Now, I downloaded fedora-live-workstation-i686-22-3.iso
  of https://getfedora.org/en/workstation/download/and (a) I didn't get the usual "save/open" Download dialog and (b) I can not find the downloaded file. The < downloads - tools > FF screen displays the file as downloaded, but not (AFAICT) where he was placed.

  Any clarification would be appreciated. Thank you.

  (OP) Well, I downloaded the same file again and this time everything went as it should. For example, some of my 'facts' above must be wrong, but I don't know who. I suspect some personal deficiencies.