Black areas in my preview and output

Similar Questions

• Best way to configure Photoshop workflow settings when source photos are taken in AdobeRGB, edited from a wide and output range in sRGB?

  Be able to quickly produce finished photographs is of importance with the majority of my photography work. That's why I pull, process and deliver JPEGs. There is no advantage to my clients to my shooting RAW for this time sensitive workflows. I won't be able to accommodate any possible future uses of the photos, so I shoot using the Adobe RGB color space. The output of my clients are JPEG images for use on the Web, so of sRGB. Currently, I used a screen wide gamut (NEC PA302W) with a 24-bit graphics card. (I plan on upgrading to a 30-bit card in the future).

  I noticed that in Internet Explorer, the reds in my finished photos are too intense on my screen. My photos look good in other web browsers on my screen. This situation worries me because I don't know exactly why it's happening since my pictures have embedded sRBG color profile and IE supports embedded color profiles. If anything, I think that the reds would be too intense in other applications that do not support embedded color profiles.

  Please let me know if my work flow can be improved outside shooting RAW and use a 30-bit screen:

  1. Take JPEG pictures in Adobe RGB color space
  2. Edit photos in Photoshop using range wide screen, 24-bit
  3. Color settings: colors of the monitor (Monitor RGB - PA302W, calibrated)
  4. Save for Web, convert to JPEG, incorporate the sRGB color profile

  When you work in Photoshop the reds appear very well. When registering for the Web and previewing "Color Monitor" the reds are intense, when previewing 'Internet Standard RGB (No. Color Management)' the reds appear very well. The final appearance of fine recorded images with the exception of when displayed in Internet Explorer, which supports embedded color profiles - color management.

  Shooting JPEG can certainly be beneficial for the size and speed, although with improvements in conversion raw in a few years it becomes harder to justify.  But if you expose just conversions in camera can be very beautiful.  The camera manufacturers do a decent job in their chips.

  Your sounds of workflow practices, but one thing you know may not be not is IE use NOT your monitor profile, so what you see in Internet Explorer is incorrect to 100% of the time.  He only reads the profile of your image.

  In other words, Internet Explorer is not properly managed by color, unless you have a monitor set to display accurately in the profile sRGB IEC61966 - 2.1.  Microsoft seems to have no intention to fix it either, which is a shame.

  I suggest to view your images in Firefox or Safari, who read your color monitor profile as well as the profile of the image.  Firefox can even be configured to display the elements of the web page in a mode of color management.

  -Christmas

• I downloaded a game on the internet, and now my screen does not match my screen. I have two large black areas on each side of my screen. How to resize my screen to fit the screen of my computer? (and yes I tried the button expand) :))

  I have two large black areas on each side of my screen. How to resize my screen to fit the screen of my computer? (and yes I tried the button expand) :))

  Hello val2000, welcome.

  These games is managed inside of Internet Explorer? If this isn't the case, then I suggest contacting the manufacturer of your computer for the latest pgrahics drivers. If installation of those who does not resolve the problem, then try to change your resolution to one of the following values (depending on the size of your screen):

  1024 x 768
  1280 x 800 (wide, common form for laptops)
  1280 x 1024
  1680 x 1050 (widescreen)

  To change your resolution:

  1. click on START
  2. click on "Control Panel."
  3. double click on "display".
  4. click on the tab "settings".
  5. change the resolution on your cursor tab and then click on 'Apply' at the bottom right

  Let us know what happens

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• whenever I try to download or preview and the image, I gives me the message "licensing for this image are no longer available" Why am I doing this?

  whenever I try to download or preview and the image, I gives me the message "licensing for this image are no longer available" Why am I doing this?

  He was going on with all the images. Using chrome, I disconnected and then reconnected and still had the same problem. I have signed in using firefox and had no problem. I bought 3 images of the last week with the help of chrome and downloaded successfully, the problem seems to happen after that. Right now I use firefox for preview images, I can't use chrome. I have not yet tried to make an additional purchase.

• The input and output encodings are not same

  Hello

  I'm trying to quantify a value by using the function 'Encrypt' and the same thing I'm trying to decipher in the next page before you update the database.

  I am using the same key algorithm and the encoding process to decrypt.

  But he is back this error "input and output encodings are not same.

  Can someone help me on this?

  
  

  form.txtPassword is plain text.  You can't decrypt() plain text.

  --

  Adam

• Source and output windows display the content horizontally cut - that makes it much too

  Hi everyone - I use both the CC2014 and the old versions CC of the Media Encoder to convert WMVs for use in Captivate 5.5. The software has been installed on a new machine, so initially when I did drag an item in the queue (in two versions), Windows Source and output would show only black and would make black only.

  Later, I discovered that Quicktime must be installed I did (for Windows 7).

  Now the two encoders show the cut content to half way down in the Source and the release of windows. content reproduced and when it is encoded (as a flv in CC for example), it displays remove off as well.

  The basic video settings are set to Match Source is not a question of culture. I have two monitors and have seen oddities when questions arise on different monitors - the graphics card is a NVidia Quadro K2100M.

  Any Format choose to exit, the result is the same. The software knows the correct proportions of the source video, only half superior is cut off - that is black.

  Is this something experienced by someone else?

  Thank you

  Frank

  Yes confirmed the answer given by marisela2013 in the link more than half of the video is missing (black screen) - Help! regarding the removal of said KB Microsoft update fixes the problem.

  It solves the problem under a new laptop of Dell Win 7 with CC2014 and CC installed with this update removed.

  Thank you

  Frank

• Jigsaw puzzle shows up to weird in preview and publish. Help!

  I use a trial version of 8 Captivate, and I added an interaction of Jigsaw Puzzle, with no funky setting. I don't have no resize or even move interaction either. He's sitting in the middle of my slides.

  However, whenever I saw or that you post, many of the pieces of the puzzle are scattered off screen and I can't even see them, and even less then move to complete the puzzle.

  Here is a sample of my preview (the puzzle is supposed to have 16 pieces). Seems better in the view "1024".

  

  If anyone else has experienced this? Or know how to fix?

  I think you will find that this interaction is not compatible with sensitive output.

  Try to add to a project inadmissible and see if it works there.

• 16:9 1080 p menu includes black bars on the left and right

  I'm a beginner still.

  I think that this question has been asked before, but are all the answers to my question. I have a clip of 16:9 (1920 x 1080 422HQ) I want to use my DVD Blu - Ray. There is no HD because of SD here. Everything is HD. This is a clip of movement, that I want to use as the background for the Blu - ray menu animation. The project is set in 1920 x 1080 full HD Blu - ray. Then why I make two thick black bars on the left and right? I'm not him in preview, only in the project view.

  Also, when I saw it, why it looks so grainy? The preview is not in full HD 1080 p, there also two black bars.

  Thank you guys!

  

  It turns out that I need to create a menu by importing a PSD 1920 x 180 instead of create a new manu in En(command+M). Can I add a background of movement as usual after the PSD imported as an asset of menu. That solved the problem, black bars have disappeared. Thank you guys for all the help!

• Why print preview and print lose lines of text from the image to the screen in the browser

  When I bring up (for example) a magazine article in my browser and you want to print it for future reference, print preview and printed image 'lost' lines of text between pages compared to the original image in the browser. For example: visit this link: http://www.pcauthority.com.au/Feature/408318, how-to-make-windows-admin-easy-with-powershell.aspx?eid=2 & edate = 20150828 & utm_source = 20150828 & utm_medium = newsletter & utm_campaign = weekly_newsletter & nl = weekly and select 'Print' from the menu. Print preview that appears - poster in portrait mode or landscape - loses one or two lines of text for the print version wraps useless. Where the missing text? pagination is not identical, and Firefox seems unable to handle it.

  I use a HP desktop with Intel i7 CPU 8 GB of RAM and Win 7 Pro SP1. Firefox is V40.0.3

  I do not see "imposed by the system of page breaks" encoded in this Web page. It would be difficult for an author of a Web page with an international audience.

  You use A4 paper, but what about those of us using letter-size paper? Page breaks may screw up page print to LETTER, from a Web site to THE like this.
  And what about the 'zoom' different levels? For printing which is called scale preview of Firefox and Page Setup print.
  I put systematically "modest" when printing to save paper, to keep the last page to only a few lines, or when the font size in print preview is too great (IMO) for printing on paper. And the size of police appeared to have worsened as monitor resolutions have gotten larger over the years.

  The only time wherever I lost lines of text between printed pages was when I was "pushing the limits" with the paper up and down / page margins. IOW, too small header / footer trying to get on each page as possible. By default, Firefox a. 5 "margins (left and right) with. 5 "header / footer (top and bottom margins) = letter-size paper. With 'A' type of paper using metric would be tantamount to the margins of 12.7 mm on all four sides. The /metric of inches "toggle" is with the size of the paper, the user has selected.

  Check the Page > margins & header / footer to see if you have the parameters of ~ 12mm or it they are smaller.

• Black areas appear in green

  Since I upgraded to Firefox V: 8 some of the images show black areas (background, shadows, etc.) as a bright green. If I change the IE engine, the problem goes away. I messed with disabling add-ons, without any repeatable fix. Sometimes, disabling one of them the problem will be solved, the next day, when things are again (?) screwed up.

  The problem seems to link to images JPEG, but I won't guarantee that right now.

  http://ashleymichelew.blogspot.com/ is a place that I saw the problem.

  Which may be caused by a problem with the profile for your monitor screen colors or color profiles embedded in images.
  
  You can disable color management to test this.
  
  You can set the pref to 0 on the subject gfx.color_management.mode: configuration page to disable color management.
  
  You have to close and restart Firefox for the changes to take effect.

  See:

  • http://KB.mozillazine.org/GFX.color_management.mode

• I have mac pro 3.1 and it is insufficient for what is his is. I need an internal card with more flexibility to the inputs and outputs as used in windows systems.

  A sound card internal Mac pro 3.1 what they do?

  And if yes where can buy one?

  I need more input and output it attach to my PA and recording, hardware as I do with a windows PC.

  The mac comes with a microphone and a single output with terrible impact when it is connected to my sound stuff.

  A few people responded to your post above. Might be better to explain what your needs are, rather than starting a new discussion here.

  http://www.Sweetwater.com/C703--PCI_Audio_Interfaces

• Since then went black download firefox 4 top and bottom of my screen and I can barely see the button/arrow to the left

  Question
  Since then went black download firefox 4 top and bottom of my screen and I can barely see the back/arrow button, if I can not go back to 3.6 and you'd have to show me how, step by step without computer talk if it is not possible for you that I return to internet explore... cordially chris williams

  You are welcome. I'm glad that you were able to find a solution with the information provided by the contributors here.

  So that other users can find solutions to Firefox previously asked take charge of issues, please take a few minutes to come back on the forum, log in, then click 'resolved' next to the answer above you helped more to find a solution. Thank you.

• HP Photosmart 7520E-all-in-one: black prints fine for text but the black areas in photos come out green

  Black ink works very well for text and text with little color, but when you print photos (on HP Advanced paper which is recommended), printed black areas aqua green, or deep.  Other colors are fine.  How can I fix it?

  The probable cause is a cartrdige Photo print does not correctly.  In the paper here troubleshooting steps can help solve black photo print does not correctly on your printer Photosmart 7520.  The Photo cartridge is on the far left of the printer.

• USB & Firewire audio interface ports still work as input and output?

  I guess everyone has to start somewhere, even if it is borne by almost everyone I would like to know the answer to my questions, perhaps with good reason, what I don't know is so if the USB ports unique connection and firewire on an audio interface function ALWAYS both as input AND output.  In other words, whenever I read the information about the product on audio interfaces, no matter where I go, it is generally accepted that most people buy their audio interface for RECORDING.  And so when most people talk about connecting their Apple computer, iMac or MacBook Pro, it is generally accepted, they turn to the USB as INPUT.  That's all very well and good.  But in my case, I want to use the USB port as output (not the taken mini) and go into an audio interface that gives me as a symmetric output signal that I can plug my amplified studio monitor (which has only a balanced XLR input). All of the examples I see with audio interfaces address registration and involve the use of the USB on the audio input interface.

  So my question is: can one USB port I see on any number of audio interfaces always function both of the inputs and outputs? It takes, but if so, why does any site mention this fact and whey didn't they show in all the diagrams of the audio interface manual hook to studio monitors?  I know what may be obvious to some, but as a user with the intention not to use a piano for a scene while but rather a keyboard/MIDI controller that is attached to the iMac to be able to use the virtual instrument software, I need to go to the controller to the iMac, then the iMac in symmetrical powered monitors. Do the balanced inputs of speakers requires more than a simple adapter to give the President a balanced input.  But nobody talks about audio interfaces usually unless they talk about as a way into the computer to record.  As for my situation? Why don't they include this example?  And why should they assume that novice will automatically KNOW that the usb port, an audio interface will work as an output as if they never EVER mention this example or Setup?  I guess it is to operate in both directions!  But really, I'm crazy to wonder when no one never speaks or shows this configuration? He suggested I buy something similar to a UR22MkII of Steinberg, who has a USB port. Even the Steinberg site speaks only records and so using the USB key as input for use with the recording software. There is no mention of its use out the mac in balanced speaker entries, even in the manual. In fact, it is question is always true for every audio interface manual that I watched, even by other manufacturers! Why they all assume a novice like me (whose money is just as good as money from the experienced user) KNOW that? It's frustrating!

  I know that this is not strictly a matter of logic, but I guess, in my view correctly, that a logic user community could be more appropriate to address my question for others communities. If I'm wrong, please help to re-send-the matter.  Thank you.

  Sound the interface itself that determines it can send and receive Audio or Midi... not the USB or FW port which both are devices of e/s...

  All USB and Midi peripheral FW are inputs and outputs

  All the USB and Audio FW are inputs and outputs...

  All devices USB or external hardware with a USB port... can handle Midi and Audio...  Some do... Most manipulate just Midi... or just Audio

  The Steinberg UR22MkII manages Audio and Midi...

  However, I do not recommend USB 2.0 audio devices... There are simply too many cases, problems and questions after the major updates for OS X with such devices especially when they are class compliant (IE without driver), even if the UR22MkII Steinberg is supposed to be compatible 10.11...

  View the other may vary... because it's just a personal opinion based on my past experiences both in my studio... and based on the many issues presented here and elsewhere.

  I'm sticking with Motu equipment for all my Audio devices... and I use iConnect devices for my Midi needs...

• Synchronized analog input and output on myRIO

  Hello!

  A brilliant new myRIO just landed on my desk and I'm looking forward to learn how to use it.

  I have a question about the ability of the default FPGA personality.

  Is really similar synchronous HW in and output possible? Can configure you the necessary trigger and clock routing from within VI RT? To say ~100kS/s?

  I need to delve into a FPGA design to achieve this?

  Thank you!

  You will not be able to get your RT loop to run reliably at rates greater than 5 kHz, and we generally do not recommend trying to control I/O faster than 500 to 1000 Hz. This isn't a limitation of the default personality himself, it's just that some tasks are better suited for the OTR and some are better for the FPGA (it is important to understand when developing an application on the myRIO). Synchronization and the output of ~100KS/s signals are something that you have to do on the FPGA.

  http://www.NI.com/Tutorial/14532/en/

  There are some good tutorials in the link above. They use the cRIO instead of the myRIO but the functionality is basically the same. The biggest difference is that you won't have to add modules to your project, because all the inputs and outputs of the myRIO are fixed and must fill out automatically when you add a FPGA target to your project.