Black color copy?

Similar Questions

• Bad or missing ink when printing or copying on HP all-in-one and color copier product families

  Click here for a description detailed steps for when colours or black are bad or missing when you print or copy on HP all-in-one and color copier product families.

  Determine if the problem is associated with cartridge

  1. the test report does not print correctly

  Check the estimated ink levels

  Check and clean the ink cartridges and the print carriage

  2. the test page prints correctly (for products only all-in-one)
  Step 1: Verify that the correct printer driver is selected in the software program
  Step 2: Restart the computer
  Step 3: Make sure that the correct printer driver is installed
  Step 4: Verify that printing in grayscale option is not selected
  Step 5: Select a color management profile
  Step 6: Determine if the problem is with the application software
  Step 7: Remove and then reinstall the all-in-one software

  Click on the laurels on the left side to help and click on accept as Solution to a solution. I work for HP.

  Best regards
  Kenneth

  I hope this helps!

• Wallpaper changes to solid black color

  Original title: I'm changing my office and whenever I change and save it back to the solid black color option. What should I do?

  I'm changing my office and whenever I change and save it back to the solid black color option. What should I do?

  Hi Jorge,.

  Thanks for posting the request in the Microsoft Community.

  It would be great if you can answer the following questions:

  1 have had any changes made on the computer before the show?

  2 the copy of Windows 7 is enabled on the computer?

  3. is there a card installed on the computer?

  Method 1:

  Above all, the problem occurs if the Windows 7 operating system is not activated. I suggest you to check if it is enabled:

  How to tell if Windows 7 is activated?

  http://Windows.Microsoft.com/is-is/Windows7/how-can-I-tell-if-Windows-7-is-activated

  You can also check out the links for more information:

  Activate Windows 7 on this computer

  http://Windows.Microsoft.com/en-in/Windows7/activate-Windows-7-on-this-computer

  Activate Windows 7: frequently asked questions

  http://Windows.Microsoft.com/en-in/Windows7/activating-Windows-7-frequently-asked-questions

  Method 2:

  If Windows 7 is activated and you are always faced with the question, I suggest updating graphics card drivers and check if it works:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If the problem is not resolved, please answer and we will be happy to help you.

  Thank you.

• Black color of display problem turns red

  I have Hp G42, and has recently created a problem. all black color of my screen turn red colur. I have check the driver and updated also. no improvement.  splash screen also shows the red color. Difficult to deal with this problem. Please give me a solution.

  Hello vichuboy,

  I understand that the color is wrong on your screen.

  Connect an external monitor to the laptop and see if you experience the problem on the external monitor.

  I would like to know how everything goes.

• OfficeJet Pro 8500 a (A910a): [HP Officejet Pro 8500 a] print issue, especially in black color

  Hello

  My HP Officejet Pro 8500 printer all-in-One (A910a) almost does print in black color more and some colors have a few lines. You can view the Diagnostic Self Test Pages I printed here.

  Hi @CuiZinieR,

  Welcome to the Forums of HP Support!

• HP Deskjet 3545 A9T81B: 1 game free 678 cartridges (black + colors)

  1 free 678 game cartridges (black + colors)

  After recording the printer online, I'm not able to find out where to send the application to the Set of available cartridges.

  Has been mentioned as a choice of supply for this model.

  Hi @ParveenSharma,

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly post information and series numbers.

  If you are unfamiliar with the operation of the function of private messages of the Forum, this post has instructions.

• Color LaserJet Pro M177fw MFP: HP Color LaserJet Pro M177fw MFP is not not color copy

  Hello, I have a HP Color LaserJet Pro MFP M177fw, when I try to copy in color mode, the printer gives me the newspaper (on the LCD screen), color copy is limited. I did not have a password for the printer. and this error is seen when you use both scanner feeder and flat bed.

  I appreciate your comments and thank you in advance for your help

  Best,

  The gesture would be to try to restore the default settings of the control panel of the printer.  Conflicting configurations on disabling color copies would be destroyed and normal again.  Resets are normally under the admin menu or the control panel service.

• The problems of alignment of the HP all-in-one print cartridge and color copier product families

  Click here for a detailed description of the following steps to solve the problems of alignment of print HP all-in-one cartridge and color copier product families.

  Step 1: review the alignment page paper was printed on
  Second step: the alignment page prints correctly
  Third step: perform a print cartridge cleaning procedure
  Step 4: try to align the page again
  1 automatic alignment of cartridges
  2 models with the semi-automatic print cartridge alignment
  3 "errors of alignment page not detected."
  4 additional information
  a. examples of alignment pages
  (b) without going through the print cartridge alignment

  Click here for assistance based on the cartridge system is using your printer.

  Click on the laurels on the left side to help and click on accept as Solution to a solution. I work for HP.

  Best regards
  Kenneth

  I hope this helps!

• How can I change the black color at the top of the screen? color is givong me a headache.

  How can I change the black color to the screen? I tried all the usual stuff. I installed IE9.

  Hi JOEGWF,

  For instructions on changing the color, see the following article:

  Change the colors on your computer
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-colors-on-your-computer

• Print black color with a color of the image page

  If I set up my printer to print in color, it prints black parts with cartridege or black color combination?

  Hi reneincer,

  I understand that you would like to know if the printer uses black ink if you set up to print with the color cartridges.

  There are different to choose print settings.

  High quality grayscale will use less cyan, megenta and yellow (CMY) that say normal printing mode, but will not be a drastic reduction. However, the only feature of black ink slightly reduced the use of the CMJ. This setting produces a composite black.

  The feature of black ink only will limit the use of color for the amount that passes under the black ink to ensure an impression for a long time and the true-black tone that should.

  More economical printing would quickly the project and black ink only.  Grayscale setting uses the color cartridge to print in grayscale, because it offers better quality.  The quality is better with shades of gray, but it uses more ink.

  You will find information in the following article. Use of inkjet printers ink.

  Here is a document on the color management settings.

  I hope it's useful.

• Windows7 Desktop only shows black color whenever any substantive theme or Image are selected in the customization

  in my Windows7 Desktop only shows black color whenever any substantive theme or Image are selected in the customization. Plese geve me a solution

  Hi Odette.

  Thanks for posting your query on Microsoft Community forum.

  Question has started happening recently? If YES, did you of significant changes to the computer before this problem?

  The question could arise for various reasons, including corrupted cards, damaged TranscodedWallpaper.jpg file, Remove background images is selected in the Control Panel, etc. To diagnose and troubleshoot these causes of the problem, I suggest you try the steps outlined in the following link and check if the problem persists.

  Impossible to change the background image in Windows 7

  In addition, please refer to the steps provided by Shawn "Cmdr" Keene [MVP] replied on January 6, 2011 in the following thread link: "".

  I am unable to change the background of color United in my windows 7 ultimate

  Additional information:

  Why can't I change my desktop background?

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Photosmart D7360: Photosmart D7360 with the new watch black print cartridge black color will be simulated

  When you install a new black cartridge HP the message "black ink cartridge empty. To continue with othe caolors pick continue. Black color will be simulated. I cleaned the contacts, clean print head, run test page, reset the printer. Still not clear. Any suggestions to solve the problem?

  Sunshyn2005

  Thanks for the info. The cartridge was not the problem.

  Problem resolved by reinstalling the program.

  Pang308

  bravohelen:

• Last updated for iOS do annotation in Arabic in black color only

  Hello

  Last updated for iOS do annotation in Arabic in black color only

  No matter what work-around?

  Thank you

  Raouf

  Hello Ronin,

  The latest version (15.2.0) of the Acrobat Reader software for iOS contains the fix for the problem of text annotation color.

  Would you please try it and let us know if it works for you now?

  Thank you!

• How to convert a different value of black color photos

  How to convert a different value of black color photos

  There are many ways to do it. You can open it in Camera Raw and check the box "convert to grayscale".

  

  Or you can add a B & W adjustment layer in Photoshop:

  

• Question about four black color

  Hi all!

  I noticed that Photoshops seems, by default, do black Black "4 color". In other words it uses C, M, Y and K to create black rather than simply set K 100%. This creates problems for me when I print things on my laser CMYK printer, because it pulls in fact all four black create toner cartridges ink. I printed out a 300-page document which was ALL black text last week and was surprised when, half by printing, I ran out of YELLOW ink!

  Also, when I create documents for commercial printing, what I often do, the problem with four black color is not wasted ink, its registration. Its very difficult for the press to save the black text is built using the four colors. Especially with the small text.

  Is there a way to DEFAULT photoshop do all black PURE black? And also this would include shadows. Even the shadows must be pure black. Thank you!

  If you insist in Ps, then you must work in CMYK destination space and then when you do your text layers, just the spec as 100% black. Convert your images color separately prior to their importation into the final doc and you'll have the best of both world, less, of course, the sharp kind that would receive you if you let the imagesetter solve it at its native resolution instead of as a halftone. Then, after all that is done, you will need to make sure that there is no color inadvertently conversions downstream where a reconversion can screw with your black generation. If the downstream conversion is done, they must be done with profiles of connection of device set up to preserve the original black gen.

  But even after all that, there is no reason not to use IDS to make even smaller announcements. The size of the announcement has no impact on the merits of the application for the work, and ID is really the most appropriate.

  As you laser printer, your original post said that you were printing of 300 pages of text, so, given that you want to check the black only option and do with it. Again, same printing to a laser printer, if you have mixed color images, you must be in final CMYK mode and have you type spec'd correctly, the printer prints all that is spec'd but only as long as there is no downstream of color conversions, which means you can print through a true CMYK RIP with your laser.