Black muslim in the White House virus threat

Similar Questions

• Black screen with the white underscore

  Hello
  I started most recently problems with my PC. It's an Hp pavilion slimline s7713w. The problem is that I get a black screen with the white underscore once he gets past the start screen for Hp. I have recently updated my RAM and my monitor but I need to download the video driver. I do not have the chance to update.

  Oh don't worry, I just went out and bought another computer, but I thank very you much for your help.

• After starting Windows Vista Recovery dvd 64-bit, the files are loaded on my laptop, however after the loading screen are replaced by a black screen and the white slider.

  Hi all

  I have my laptop startup problems, and after you use the Windows Vista Recovery dvd(64 bit), I get a black screen with a white cursor. If I try to start the system in safe mode, I get an error message "windows/system32/ntoskrnl.exe is missing or damaged. Because I can't run the recovery dvd, I'm a bit stuck. Any suggestions?

  Evan

  Hello

  If you have problems with the process of recovery of manufacturers, contact the manufacturer

  It's their recovery process not microsofts

• Satellite P850/040 - Windows 7 black screen with the white mouse pointer

  I have a Satellite P850/040

  I tried to start and was taken to the "Windows Error Recovery" screen. I tried the options "Start Windows normally" and "(recommended) launch startup repair. None worked!

  In the "Advanced Boot Options", I tried in vain the following options:
  Repair your computer
  Safe mode
  Activate video low resolution
  Last known good Configuration (Advanced)
  Start Windows normally

  Foolishly, I did not run a backup of my files for 6 months & can't afford to lose some of them.

  Does anyone have any suggestions? Or should I send it to a Repair Service Toshiba (it is not available in the city where I live)? Thank you

  > Stupidly, I did not run a backup of my files for 6 months & can't afford to lose some of them.

  Two options:

  (* 1) * you would remove the laptop HARD drive and use an external USB 2.5 enclosure SATA to connect this HARD drive on another computer. In this case, you should be able to access the HARD disk and save the files.

  (* 2) * you would be to start Notepad using Live CD Linux Live CD or a Live CD of WindowsPE. Google this for more details.

• PSE10: how to create the white text box with text in black? [was: question]

  trying to create a white text box in photo shop element 10 and black text, so write pop can not understand

  Open your photo in the complete edition

  In the top menu click Layer > New > layer & OK

  Select the rectangle Selection tool

  Drag a box on the top you photo where you want to place the text

  Ensure that the chip of high color at the bottom of the tool palette is set to white or press D to default to black & white, and click the rotation arrow to move the black chip behind the white chip

  Select the paint bucket tool and click in the middle of your rectangle to fill with white

  Go to the layers palette (window > layers) and put highlight the top layer then lower the opacity to around 50% slider

  Select the T tool and type in black, then save.

• Definition of white/black Points using the tone curve

  I am trying to install white/black points using the tone curve, but when I try to drag one of the end points of the line in the tone curve tool, I can't move. Could those be locked somehow...?

  It is what it is supposed to do. Without the sliders, you work with the curve itself. Now, you have direct control of the curve and can drag any part of it. Have you thought in your white and black points using the whites and blacks in the base Panel while holding down the opt/alt key? I guess the reason why what he says point curve is because this icon is what allows you to curve to the point.

• Satellite X 205-SLi3 - black screen with the mobile mouse at startup

  I have a computer laptop X 205 - Sli 3 satellite, which is a little more than a month and running windows Vista. (let me know if the exact specifications make a difference)

  Yesterday morning my laptop was working fine, I arrested him at home because I need to take to work with me to get some files there. However, when I tried to turn it back on all I got was a black screen with cursor mouse mobile white dead center. I saw other posts with similar problems, but no solutions.

  Loads everything up as normal at the beginning: I get the Toshiba load screen (this allows me to make changes to the boot from there with F2, F8, F12 or, but none seems to have no effect) and I get the little green loading bar of Microsoft just before the screen blinks a few times and then turns black except for the white mouse. The touchpad, Capslock and scroll lock keys * are * admissible, but the function keys and Ctrl + Alt + Delete to do * not * work. There is no way to stop the laptop at this point without maintaining the power button.

  I tried to start in safe mode, safe mode with networking, safe mode with command prompt, only to get exactly the same result after Windows loading bar. (only a lower resolution on this beautiful Virgin high-def screen mouse cursor). I activated the boot record, nothing, I tried to start with the "last known good configuration", nothing.

  I tried windows repair options: repair system, System Restore (it * was * a windows update just before restore point in my laptop screwed up and I m wondering if that has something to do with it because it was the first time the computer was turned off since the auto update installed... but get an older restore point does not help) , as well as the windows memory diagnostic tool. Everything is displayed normally but still black screen after the loading bar Microsoft...

  I also tried the debug mode, and directory services restore mode just for the heck of it - each time the black screen of death.

  I even put in the Toshiba recovery disc and put my laptop to boot from the CD rather than the HD (it gives me the same options by pressing F8 and go to repair are starting only I didn't have to put my admin password)

  The only thing I can think that I n t done is format my whole hard drive, I know that this is not always a solution, and I prefer to keep all my school and work files if possible. Fortunately I am able to get into the command prompt BACK and some of the most important things am copy on a USB key, but I'll still probably lose all my programs and larger files.

  Someone had a similar problem?
  If so, what was the solution?
  I would call all technical support, but I won't have time until after the new year to spend on the phone and I have a feeling that their solution will be to format and use the recovery disc.

  Man, such an expensive machine and then all this work of wouldn because of some software sh... So, if you have backed up your most important files, then, I would _recommend_ you to recover your machine. Won´t solve you anything just trying to find the error, believe me, you'll go nuts.

  Just put the recovery in the drive and start the process of "delete-all-my-programs-but-protect-my-nerves-and-make-everything-OK".

  Welcome them

• Why my iphone 6 more stuck with the apple logo and the black screen after the factory reset?

  I'm selling my iphone 6 Plus I did a factory reset, but it has stuck on a black screen with the white apple journal for more than an hour, why what is happening?

  Force the restart: press the lock and home buttons until the Apple logo appears again.

• Black finger across the screen to the bottom only in locked mode - retina 2014

  Mine is a MacBook Pro (retina, 15 inches, mi 2014) 2.2 GHz with integrated display. When I opened the laptop this morning, I was welcomed by a screen locked and noticed a black spot on the lower part of the screen. My heart sank for a moment, but when I logged in, I did not notice the finger any longer.

  I see the black spot that looks like an ink spot (see photo) when I get back to screen locked again. What is an LCD failure or is there something else going on? If it's an LCD has failed, why not see the problem when it is unlocked? How to fix? Thanks for any help.

  

  Notice the black spot. The white point at the bottom left of the screen above is just the cursor hidden.

  

  No stain when unlocked can be exceeded.

  Could be a hardware failure.  If you bought AppleCare, you have 3 years warranty on the material and can diagnose the Genius Bar it repair free of charge - it is reproducible, so you can show them.

• Vista black screen after the loading bar

  I have the problem that I am assuming that almost all users of Windows Vista have probably experiences - the black screen with the white cursor lonely after the loading bar 'Microsoft Corporation'. Here are the steps that I tried to solve the problem, but have not yet worked:

  • With the help of "last known good configuration" brings back me to the screen and the white slider
  • Go into safe mode which brings back me to the screen and the cursor
  • Activate the video mode low resolution which brings back me to the black screen and a cursor
  • Using Ctrl + SHIFT + ESC to appear during the black screen Task Manager
  • CTRL + Alt + Delete does not work on the black screen
  • I do not have access to the installation CD, as it was preinstalled on the computer

  Yes, as usual, what happened after a windows update - I really should stop waiting for something good to these updates.

  I'm under the original version of Vista Home Premium without service pack - these caused a similar problem, but at least I was able to return the system restore.

  Thank you in advance, I know how useful these forums can be.

  Yes, a new installation of Windows 7 was the way for me. Lucky he composed a back all my documents, however. Thanks for the help all. Unfortunately I have no where near more closely to solve the problem, then when I started.

• Disc Read Error black screen with the mouse cursor

  Hello world.

  I'll apologize in advance if this was picked up elsewhere, however, I've been unsuccessful with validated solutions, I found.

  I am trying to reinstall windows 7 on my laptop. I used to have win8 but got fed up with the thing of 100% of the disk. I reformatted my drive and installed win7. Everything was ok for a few days, and then he started getting lag. I decided to do a chkdsk (c:/f/r/x). He asked for a reboot in order to complete the process. After the reboot, chkdsk found a couple of bad sectors (I don't remember what files should be moved) and restarted again. This has happened 3 times in total.

  The last restart led me to the «a read disk error occurred press Ctrl + Alt + Delete to restart» It comes as I can get without the disc...

  Then I tried an official win7 installation disc which gets a little further. After lingering on the 'Starting Windows' screen for a few minutes, the screen turns black with only the white slider.

  I changed my BIOS settings also so:

  * SysInfo *.

  -No change

  * Advanced *.

  -CPU - disabled power saving mode

  -EDB (Execute Disable Bit) - active

  People with disabilities - Mode BIOS fast-

  -AHCI Mode Control - Manual

  -Set the AHCI mode - people with disabilities

  -USB S3 Wake-Up - disabled

  * Security *.

  -No change

  * Start *.

  -Boot Device Priority

  1 SATA CD (DVD player)

  2 SATA HARD DRIVE

  -Touch Mouse Pad - people with disabilities

  -Secure Boot - people with disabilities

  -Selection of the Mode of OS - OS CSM

  -Internal LAN - enabled

  -PXE OPROM - disabled

  [Please note that I used setting 'UEFI and CSM the OS' aswell in the Mode of the OS but kept a CSM OS as long as there is no point using both with win7]

  I have used most of the F8 options and get the w/cursor black screen.

  Start in safe mode always seems to stall on "... \drivers\disk.sys" what "loading Windows Files". After 5-10 minutes on this, it would eventually return to the screen Black w/cursor...

  Jacky help would be really appreciated, soon.

  There is no point in trying to reinstall Windows. If your drive is faulty, then a new installation will not fix it. To get a reliable report on the status, you must download and run the web page of the Disk Manager Diagnostics tool.

• Safari in demonstrating the existence of a threat of viruses and asking me to send Apple. Unable to browse a Web site on safari. What to do please help?

  While browsing the site approached a pop and watch, it of a virus threat and requires me to send an email.

  Go to settings > Safari > clear the history and Web site data > type and confirm. Then, in the same advanced screen > the Web site data > make sure that there are no site here and if there is, remove it by pressing Edit (top-right) and then on the red icon on each site.

  After that, press the "home" button twice and slide downwards (force close) Safari

• First white screen of death, now black screen on the internal, external screen works

  Hello

  a few months before I could not suddenly start my macbook more. He had the white screen of death and absolute no functionality in addition to its departure.

  A few days ago I got the macbook, open/close a couple of times so that it is operated and suddenly the keyboard LED lit and the screen

  turned black. I realized that he really started and connected to the external monitor. everything works fine now in addition to the internal display.

  I run Apple Hardware Test mode clamshell, but extensive testing even said that there is no material errors.

  can I conclude that my screen is not faulty? I thought it of the graphics chip, but wouldn't the AHT it detects then?

  Another thing to mention is that the battery should be changed (warning hint)

  I tried PRAM - & resetting the SMC without success.

  MacBookPro 13 "A1278 mid-2012.

  I would really appreciate any kind of advice.

  Thanks in advance

  Alex

  The symptoms you describe point to a faulty screen or display connection.  Make an appointment at an Apple store genius bar for a final assessment.  The event will be FREE.

  Ciao.

• Satellite M30-853 - vertical white lines or black spots on the screen

  Hello

  I have a laptop Toshiba Satellite M30 - 853 during nearly four years. A few days already, I'm having a problem that they come from the white lines vertical or black spots or screen is smear when I am trying to move a window from time to time. My wireless adapter is in use.

  The vicinity of processor, video card and wireless network card are very hot. My cooling fan is starting and stopping, but I'm not sure of its effectiveness.

  I disassembled the laptop to clean it if there is little to dust, but I found it in very good condition. Anyway, the problem persists and I am looking for decision. Someone told me that probably that's because of the defective video card memory. It's strange to me because the problem is not permanent it is often and if I try to cool the surface it disappears.

  I'd appreciate any suggestions.

  In my opinion, these issues must be verified correctly. This can be done using different diagnostic tools. It is important to know what the problem cases.
  Of course, it has something to do with the temperature of material and graphics card. Sorry but I'm really skeptical, you can do something alone. Maybe you should seek professional help.

• I have a black border to the left with a white line and viewing area office is shifted to the right?

  I tried everything I know to get the full screen. But still have a black area on the left with a white line in the middle and I can't read the whole screen? just as now the typing I get to the right goes beyond design. I need to move the screen to the left one having full screen again. Help

  I tried everything I know to get the full screen. But still have a black area on the left with a white line in the middle and I can't read the whole screen? just as now the typing I get to the right goes beyond design. I need to move the screen to the left one having full screen again. Help

  ==================================================
  Your monitor has any manual controls for the centering of the screen?
  There may be buttons or buttons just below the exposure correction.

  Depending on your video driver... you may have a control panel that
  allows you to adjust the display settings. For example... NVIDIA has this
  option... just go to... Control Panel and see if you have the Nvidia control
  The Group of experts.