Black screen with the white underscore

Similar Questions

• Satellite P850/040 - Windows 7 black screen with the white mouse pointer

  I have a Satellite P850/040

  I tried to start and was taken to the "Windows Error Recovery" screen. I tried the options "Start Windows normally" and "(recommended) launch startup repair. None worked!

  In the "Advanced Boot Options", I tried in vain the following options:
  Repair your computer
  Safe mode
  Activate video low resolution
  Last known good Configuration (Advanced)
  Start Windows normally

  Foolishly, I did not run a backup of my files for 6 months & can't afford to lose some of them.

  Does anyone have any suggestions? Or should I send it to a Repair Service Toshiba (it is not available in the city where I live)? Thank you

  > Stupidly, I did not run a backup of my files for 6 months & can't afford to lose some of them.

  Two options:

  (* 1) * you would remove the laptop HARD drive and use an external USB 2.5 enclosure SATA to connect this HARD drive on another computer. In this case, you should be able to access the HARD disk and save the files.

  (* 2) * you would be to start Notepad using Live CD Linux Live CD or a Live CD of WindowsPE. Google this for more details.

• After starting Windows Vista Recovery dvd 64-bit, the files are loaded on my laptop, however after the loading screen are replaced by a black screen and the white slider.

  Hi all

  I have my laptop startup problems, and after you use the Windows Vista Recovery dvd(64 bit), I get a black screen with a white cursor. If I try to start the system in safe mode, I get an error message "windows/system32/ntoskrnl.exe is missing or damaged. Because I can't run the recovery dvd, I'm a bit stuck. Any suggestions?

  Evan

  Hello

  If you have problems with the process of recovery of manufacturers, contact the manufacturer

  It's their recovery process not microsofts

• Why Windows 7 setting would deliver a black screen with the cursor visible before you load the Office?

  I had a very unusual event this morning.  I am running Windows 7 on a desktop computer.  On startup, I reached the login screen and proceeded to connect to my name.  Prior to loading the desktop computer, however, I was in a black screen with the cursor visible.

  1. I am able to load successfully under another user ID.
  2. I am able to boot in safe mode (with networking) using my own code.
  3. I did a system restore with no luck.  The problem persists.
  4. I don't think it's a driver issue because it would affect the two IDS and who does not.
  5. I have a touch screen and the white slider moves even in the place where I touch.  (what works)

  Issues related to the:

  1. what "custom" setting would result in a shift of the display of this type?

  2. If I go to Windows 8, will I have the opportunity to 'reset' my display options?  Or it will automatically upgrade to the wrong setting?

  Thank you.  Any guidance would be greatly appreciated.

  Thank you for your solution.

  The problem turned out to be the result of a combination of events.

  1. I did a change of media display a week ago but never restarted.
  2 MS did the periodic security update that rebooted the machine overnight.
  3. the update may have actually been in the middle of the installation when I got to my machine in the morning.
  4. when the screen has not responded, I restarted manually by pressing the power button.

  Ultimately, I was able to access Task Manager and found several instances of several components running.  When I "force stop" several of them, the office completed and I was in business.

  I still have the wide black border around my 'Live TV' screen in Windows Media Center, but that's another question for another time.

  Once again, thank you for the time spent to help me.

  Best regards

  Steve

• black screen with flashing related underscore

  Hi my name is Joshua, I have a computer that starts, but then gets the black screen with a flashing underscore in the upper left. I check my hard drive and my ram on a separate computer and they all work and start fine. I can not even boot the recovery disc or same thing happens to a black screen with the underscore. Please help I'm a youtuber and have not been able to implement all the videos by the way in which this computer is new.

  Hey I found the problem. the hard drive was not entirely start cause I'm a card mother amd. has my other hard drive and just reinstalled windows has windows 7 on it and its working fine also the cd drive has been bad had to pass out but thanks for the info, I can use it later in life.

• iPhone 7 more stuck on black screen with the spinning wheel

  How can I fix it? I tried to reset, go into DFU mode, recover from iTunes. Nothing works. I can't use iTunes because he wants me to grant access from my iPhone is not responding. DFU mode doesn't work, the screen does not any combination of seconds I hold down the buttons to. This has happened more than an hour. Should I just wait for the battery to die? Please note that I do not live in the United States or the U.K. or anywhere with an Apple Store, I can take it to.

  Thank you

  Hello! I think that I may have a solution to our problem of the black screen with the circle of rotation.

  I came across this post today because my iPhone all nine 7 (which I've upgraded to the latest ios) also got stuck on a black screen with the circle of rotation. I tried to update some of my apps, when suddenly the screen froze. I clicked once on the home button and the screen become black with the subsequent appearance of the circle of rotation.

  I have tried everything - simultaneously press the home button and power (does not work). connected to itunes to do a restore (it won't let me not because my "find my iPhone" was turned on - but I could not turn off because my phone was insensitive).

  In any case, a very useful Mr. Damon (Senior Advisor to Apple) helped me via chat to solve the problem.

  Here's what I did:

  1. make sure that your iPhone is disconnected from the socket or the computer.

  2. hold the POWER button and the VOLUME DOWN button at the same TIME. If it works, the screen should turn off almost immediately.

  3. connect your iPhone to the computer. (when I have connected to the computer, my iPhone automatically on and was ready to be reused).

  The steps below are for those whose iPhones did not turn with the above steps. The following steps are designed to allow you to disable remote your 'find my iPhone', so you can do a manual restore from iTunes.

  4. go to www.icloud.com.

  5. click on Find iPhone

  6. given that the phone is turned off already, he won't be able to find it. On the top bar, click DEVICES.

  7. click on your iPhone.

  8. click on "delete account".

  9. go into your itunes and do a restore.

  I did have to do steps 4 to 9 more, because as I said, my iPhone automatically activated after step 3.

  This really worked for me. I hope this works for everyone else too! Have a great day!

• I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. Hard restarting does not help, neither do not connect the camera to MacBookPro. Any ideas?

  I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. I left plugged in all night and still no change. Hard restarting does not help, neither do not connect the unit to aMacBookPro. When I do this, iTunes complains that it can not connect because the iPad 'expires '. Now it is disconnected, but I can't turn it off. Even close the lid will not extinguish it. Any ideas?

  Try the following. It seems yo may have to let the battery drain is completely:

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• Windows 7 black screen with the cursor of the mouse in normal mode and safe

  Hi all
  I hope someone can help.
  Laptop downloaded updates and after the restart will only go to a black screen with the mobile mouse cursor.
  This occurs in safe mode, normal mode.
  I tried all variations of safe mode and still the same thing happens.
  Last known configuration does not solve. (i.e. no restoration or image to enter)
  Using the vista win7 dvd upgrade or a linux dvd and screen appears as you expect his obvious system is very good.
  I tried the options on ctrl alt del, ctrl shift esc etc etc, but I cannot go into Control Panel, or a any part of the win7 GUI.
  Best I can do is access via the command-line... any thoughts on how to fix?

  Hello

  Welcome to Microsoft Windows 7 answers Forum!

  You can try the following steps and check whether the problem is resolved.

  You can disconnect all external devices except the keyboard and mouse and check if you are able to boot to the desktop and check.

  I also recommend what to do the Startup Repair. Follow these steps:

  To perform a Startup Repair follow these steps:

  1. Insert the DVD of Windows 7 and restart the computer.

  2. when we are asked to press a key to boot from the DVD, please press enter or the SPACEBAR.

  3. choose your language settings, and then click Next.

  4. click on repair your computer.

  5. Select the operating system you want to repair, and then click Next.

  6. in the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem, and if necessary, it may restart your computer, because it makes the repairs.

  Access the link below for more information on the Startup Repair:

  http://windowshelp.Microsoft.com/Windows/en-us/help/5c59f8c1-b0d1-4F1A-AF55-74f3922f3f351033.mspx

  See also:

  http://social.answers.Microsoft.com/forums/en-us/w7install/thread/ab43493b-247C-427e-BA21-4950eea279ac

  http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/24b44a01-872e-4d87-867f-ed01a3579031/ for the black screen problem

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows xp black screen with the cursor

  Windows xp black screen with the cursor

  Hello

  You did it changes on the computer before the problem started?
  You are able to start the computer in safe mode?

  If you cannot start the computer in safe mode , and then follow the steps in the article mentioned below.

  Computer stops responding with a black screen when you start Windows XP:
  http://support.Microsoft.com/kb/314503

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers Feedback Forum and tell us what you think.

• Windows xp does not start, I can't even in safe mode. I Mindprint just a black screen with the mouse arrow. What can I do

  Windows xp does not start, I can't even in safe mode. I just get a black screen with the mouse arrow. What can I do

  Hello

  1 did you changes to the computer before the show?

  You can try the troubleshooting provided in the link below steps to fix the problem.

  Computer stops responding with a black screen when you start Windows XP

  http://support.Microsoft.com/kb/314503

• Windows xp does not start, I can't even in safe mode. I just get a black screen with the mouse arrow. What can I do

  Windows xp does not start, I can't even in safe mode. I just get a black screen with the mouse arrow. What can I do

  You have all the features non-essential related to the machine?
  Have you installed a new hardware or software recently?

  Try to do a repair install and see if it corrects the problem.

  How to perform a Windows XP repair install

• I have service pack 3 installed and yet I still have a black screen with the message of counterfeiting

  I have service pack 3 is installed, but I still have a black screen with the message of counterfeiting. I am a beginner of the computer

  Hello

  (1) you are able to log the desktop computer?

  (2) when exactly you get the black screen?

  (3) you receive an error message on black screen?

  (4) have you made any changes to the computer before the show?

  Please provide more information on the issue so that we can better help you.

  In the meantime, try the methods below and check if the problem persists.

  Method 1:

  In case you receive a black screen on startup of the computer, and then try the steps of troubleshooting provided in the link below.

  Computer stops responding with a black screen when you start Windows XP

  http://support.Microsoft.com/kb/314503

  Method 2:

  If you are able to start the computer and you get the black screen at the level of the office without wallpaper then try the procedure described in the link provided below.

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

  http://support.Microsoft.com/kb/318027

• XP, black screen with the msg of boot errorm insert disc drive system & hit enter, does that mean?

  When you feed on my PC I get a black screen with the "Boot disk error msg; "Medallion system disk & press enter" what does that mean? I don't have the original CD or a recovery disk, what can we do?

  Hello

  This means that your hard disk contains an error, or the start-up phase damaged operating system. If you have any bootable media, you must visit certain computer services near you.

  Maybe just an idea - you have a floppy drive? Maybe you have inserted the floppy in the floppy drive. If the answer is Yes - Remove the floppy disk and restart your computer.

  LC

• Computer starts up, it stops at a black screen with the mouse icon (which moves around as usual)

  When I start my laptop, it goes through all the loading screens (Windows Vista etc.) then sticks to a black screen with the mouse icon... I somehow managed to try a restore of the system by a few points, but they all failed a moment I can't even find this option.

  Hi Peter,

  1. have you done any recent hardware or software changes to the computer before the show?

  2. with what code error did system restore fail?

  Method 1:

  Try to start the computer in safe mode and check if the problem persists,

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:

  Try and perform a startup repair and check if that helps you.

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

• My Dell Vostro 1310 won't start. I turn it on and the black screen with the Dell logo appears and nothing more

  It was working fine and accidentally my phone fell on the keyboard and the computer froze. There was a part of the image of what was on the screen before that happened and blue and red lines/markings or whatever it is. I unplugged and took out the battery. When I turned on it again, the black screen with the Dell logo comes up and just stays there. What should I do?

  Hello

  If under warranty contact Dell

  http://support.Dell.com/

  or ask in the forums Support of Dell

  http://en.community.Dell.com/support-forums/default.aspx

  If it is under warranty, contact a reputable repairman, local computer