Black screen on L10-300 Equium

Similar Questions

• White screen on my Equium L10-300

  Hi all

  New on this site but I was wondering if someone can help me. I have an Equium L10-300 and the screen seems to start going white corners in until it becomes white. I found that by pushing on the top of the screen is the only why return to normal.

  This means that the screen is broken and it needs to be replaced completely or is it caused by another party? Anyone who can shed some light on this problem would be greatly appreciated.

  * coop thank you *.

  For me, it is definitely hardware problem. It may appear or may display cable (maybe some crack on cable or bad connection). Sorry, but I don't think there is something you can do alone. I recommend you contact the service.

  They allow to check the view feature.
  Good bye

• Equium L10-300: white screen when turn on - nothing happens & displayed

  Equium L10-300. Just when turn it on, nothing happens and nothing appears. Before power indicators are on but not the green power on light.

  I thought that the LCD screen was broken, but it turned itself off recently on a couple of opportunity (I guess overheating) I think maybe that's the problem.

  If its possible to have it repaired I would like to know a little more before you cast.

  What you mean with I would like a little more knowledge? If the LCD is damaged it must be replaced. If the warranty is still valid, contact service in your country as soon as possible.

• Equium L10 300 Wont start white screen

  Hi I wonder if anyone can help or advise me with a problem starting

  It's a portable satellite L10 300 XP homedition, after running PC doctor to remove Popups and adware my laptop stopped commissioning.

  Initially started after the system check it kept returning a blue warning screen that flashed off very quickly before close and try to restart this making it very difficult to read, but I managed to do something about a problem of physical memory and the dumpster, I managed access the options of safe mode and tried each of the options including the last good configuration known, but all failed to start the machine and I'll be back the same error message. Then at some point with all of my violin that it now wont even run the system check before crashing it's now only the initial startup which allows me to access the system BIOS F2 and F12 and nothing more.

  I have the product recovery disc and tried briefly before interupting it is when I realized the instructions say it will reformat the hard drive and I'll lose all my data that I do not wish to.

  Is there a way for me to fix it or copy extracts my data before using the product recovery disc.

  Thank you very much in anticipation.

  First of all, you should check the memory, it may be altering the data. Have you recently installed spare memory? Go to www.memtest.org and memtest from a floppy disk or a bootable CD.

  To recover your data, you can remove the HARD drive and connect it to another PC using a 2.5 "USB adapter. Then put the HARD return drive recovery to and execution.

  PS. You can view the blue BSOD code by pressing F8 at startup of Windows start and select 'Disable automatic restart in the event of system failure' in the Menu.

• Equium L10-300 - message "media test failure".

  Hello

  I'm asking on behalf of a friend. They recently, accidentally had a spill of liquid on the keyboard of their laptop Equium L10-300 which resulted in the message "media test failure" appearing on the screen and makes it so the laptop unusable. Apparently when the liquid was split open CD-ROM drive (coincidence?), while the player also "clicky" sounds when the case he pressed.

  Is their machine completely buggered now or maybe just the hard drive / liquid obtained in the drive? Are there recommendations for when such an incident occurs or just let it dry out and hope for the best?

  Thanks in advance

  Hello Michael

  The liquid spited in Notepad is the worst thing that can happen.

  > Is their machine completely buggered now or maybe just the hard drive / liquid obtained in the drive? Are there recommendations for when such an incident occurs or just let it dry out and hope for the best?

  Why hard drive? I fear that the defective mainborad may be responsible for this message (IDE controller). Boyfriend sorry but it is just a recommendation, contact the service and let check the laptop.

• Connect an external monitor to an Equium L10-300

  Hello

  I wonder if someone can tell me how to connect a Viewsonic external monitor to a laptop Equium L10-300?

  I unplugged the screen and when I got to reconnect again I got a message "No signal input" on the monitor. I sent the manufacturers of screens that said I had to turn on the laptop, wait for Windows to load, and then press and hold the function key, while pressing F10. There is nothing! Before that, they said that I needed to press the feature key followed by the key with the monitor symbol F on it, it doesn't work anymore!

  Can someone help me out here?

  Thank you

  Jodie

  Hello

  The laptop supports a port external monitor (port/VGA RGB port).
  You need a VGA cable to connect the external monitor to this port of s for laptop.

  After that, use the FN + F5 key combination to switch to the external video output
  All that s

  If the buttons FN n t work then you must install the utility of the European driver Toshiba page shortcut

  PS: I assume you are using Win XP
  You can also do this:
  Right click on the desktop
  Choose Properties
  Has chosen the last settings tab
  Choose Monitor 2 and check extend my Windows desktop on this monitor

  Welcome them

• Equium L10 300: question of burning & DVD S-Video

  I have a 300 Equium L10. I have 2 questions.

  1: it is said that it is a MULTI recorder, but it does not burn on a DVD + RW, is this correct?

  2: when I connect to the TV via the S-video cable to play a slideshow of the laptop, the TV screen is blank.

  Help, please.

  Hello

  1. it is OK
  2. I don't know how you do this slideshow, but I assume that it can occur if you use the screen LCD and TV at the same time. Try setting the TV only.

  Good bye

• Black screen on Equium P200D blocking

  I bought an Equium P200D about two weeks ago and it keep "black screening" on me. Without warning, it would be empty screen, no mouse, the keyboard is unresponsive, caps lock, shift etc. is more changed their lights. Click briefly on the power switch, it wasn't in mode 'sleep'. The only solution I found was to hold down the power button, then restart.

  I myself am sick of this problem so I reinstalled Vista. After the long list of SP1 updates and an update of the video driver, it stays black screened. So I tried upgrading the BIOS. So far so good. No more black screens. Two days running this laptop is not black projected onto me.

  Note there is another black screen blocking out there - but it is not the same. In the other, you get a mouse and can use CTRL-ALT-DELETE to get a task manager and run explorer.exe to recover. This black screen, I found usually happened after the system went to bed or while you are using.

  Pete

  Thanks for this message from Pete.
  I noticed the empty screen after wake up form hibernation on Vista laptop too.
  As you update the BIOS solve this problem successfully.

  This thread might be useful for other users who noticed the very strange behavior.

  Ciao

• Equium L40-10 x black screen

  OK, I'm at my wits end with this one

  Equium L40 - 10 x screen went dark. Can know roughly if brandi for screen light. Works fine when connected to the external display.

  Replaced the power inverter - still black screen
  Replaced screen - screen still black
  Replaced the screen cable - still black screen

  Only other thing I can think is too that the replacement inverter was defective?

  What else could be?

  > Can know about if brandi for screen light. Works fine when connected to the external display.

  He is a singing typical of FL inverter problem
  The FL inverter is part hidden behind plastic frame and control the hand lit display.
  I guess it must be replaced

  New part can be bought from authorized maintainer Toshiba
  Get in touch with the guys in your country and ask to fix.

• Equium L10-300: how to remove BIOS password which was never put

  Hello

  I have a Toshiba laptop Equium L10-300 which has just begun to ask a market BIOS password, which is strange, because you never have the value. I read in these forums and have found that the other models had the same problem.

  Now first of all, I was wondering if there is anyway to fix this without sending it away and if not then who can I send it to and the repair will be free?
  Thank you

  Hello

  I didn t notice such BIOS password on my laptop problem.
  However, if the BIOS has been set and that you can not connect, then you will need to contact the ASP in your country for the removal of the password! Without the help of ASP, you will not be able to use the laptop.

  But I can't say much about the cost. I think it could be done for free. Just call the guy and explain your situation.

  Good bye

• Car/truck/plane for EQUIUM L10-300 charger?

  Please can someone tell me what loader is correct for my EQUIUM L10-300?

  Hello

  As far as I know your unit has got a CA PA3396E 65W adapter - 19V - 3. 42A
  I found a part: charger car/truck/plane laptop 90W, 3 - 5A
  Part number: PX1116E-1NPO
  But I m not really 100% sure if it s compatible with your device.
  I recommend you contact the service partner. There you can get more information
  on the compatible parts.

  Best regards

• Equium P300-19O - black screen and does not restart

  My Equium P300-19O had a blue screen of death after a few accidents occurred due to a broken Windows media player which 3 safe resets and then I get a blue screen of death.
  I restart the laptop, but now I have past the toshibia load up, but do not get further rather get a black screen with a dash flashing in the upper left corner.

  Please suggest anything that could help me get the laptop again.

  Hello

  Have you checked if you can boot into safe mode? You can try to start in safe mode if you go into the advanced boot menu by pressing F8 after you have switched on the laptop. Here you can choose.
  Maybe you can also try a system restore to a previous state.

  If it doesn t work it should boot from the recovery disk Toshiba and reinstalling Windows.

• Equium L10-300 - Question about BIOS password

  Hey all hope you can help a new user please.

  Had a customer to put in a notebook Equium L10-300. Somehow has been a password on the BIOS and start-up, so I can't do anything with it. I can't boot from a CD and I tried a USB floppy drive, it seems to the flexible time and then just operates in the password box. I was going to try a BIOS flash, you see.

  I'm guessing maybe remove battery from the bios might help? But do not know where it is or how to get to it. All links to the manuals etc. would be nice. I ve read some new Toshibas have special security chips now hold passwords etc.

  Any help would be thank you very much, really need to solve this problem.

  Mark

  Hello Mark

  If you have clients, I assume that you work for an authorized service. The fact is that each service description how to remove the BIOS password on each laptop model.
  So if you try to delete the BIOS password I can't imagine work you for some Baker. So many things on your work.

  Another important thing is that the BIOS removal procedure is kind of top secret information and may not be the subject of public debate. This information cannot be displayed here. This will be a valuable aid for all who attempt to enter stolen laptops. Do you agree with me?

  If your customer needs professional help to send him to the authorized Toshiba service provider nearest. They know how to remove BIOS password.

• Equium L10-300 radiator & fan Exchange

  The fan on my sisters laptop computer has stopped working, making the laptop overheating and turning off.
  The laptop is an Equium L10-300.
  Also, the warranty has expired, giving 2 options, get a professional to open it and change the fan or do it myself.

  Nobody knows the type in the assembly code radiator & fan how do I disassemble the machine, I tried to find a guide to disassembly without look much.

  Thank you.

  Hi dude

  Hmm, as far as I know, you need to set cooling module which has been designed especially for this series of satellite.
  These special Toshiba parts can be bought from the AEP from Toshiba, which is responsible for your country!

  I recommend to contact the guy and to order this part.
  In addition, you should ask for additional help on the replacement of the cooling module. Disassembly of the laptop is not easy and a little trickier. People with no experience could damage other parts during disassembly procedure. That is why it s really desirable assistance some technicians.

  Best regards and mate good luck

• Re: Equium restore factory L10 300 (XP) without CD

  Hello

  I have an Equium L10 300 on XP and I need to restore to factory State, however I have no backup CD.
  Any advice on how I can do this or how to order backup CD?

  Thanks for your help

  > Any advice on how I can do this or how to order backup CD?

  If you still * Hdd recovery image * you can restore the factory settings as described here [Hdd recovery | http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm]
  The original Toshiba recovery disc can be ordered online by [here: https://backupmedia.toshiba.eu/landing.aspx]
  or use the Windows installation disk and [pilots | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]