Connect an external monitor to an Equium L10-300

Similar Questions

• Tecra Z50 - need to connect two external monitors

  I think to buy Tecra Z50, but one of the features that I need is the ability to connect two external monitors.

  Is it possible to have a monitor connected to the HDMI and a VGA (with computer laptop lid closed)?

  * Hi-speed III Port Replicator is not an option, because it is not available in my country (Croatia).

  Hello

  I don t think you will be able to connect two external monitors to this laptop using HDMI and RGB port at the same time because of different types of signals.

  The RGB/VGA port supports analog signal.

  The HDMI port provides the digital video output and when the external monitor is connected to the HDMI port the device is set to HDMI.

  > * Hi-speed III port replicator is not an option because it is not available in my country (Croatia).
  What of the Dynadock? Its an external device connected to the s for computer laptop USB port.
  It supports own graphic unit and you can connect to another external monitor such Dynadock 2nd.

• WT8-B-102 - how to connect the external monitor

  Hello

  I have a toshiba WT8-B-102 Tablet and I need to connect an external monitor (vga or hdmi).
  My tablet doesn't have an hdmi port.

  Any solution?

  Best regards
  Francisco

  Hello

  WT8-B-102 does not therefore support other output micro HDMI port the connection to an external monitor or TV isn t possible.

  But as far as I know the Tablet supports the wireless display technology (Miracast / Intel WiDi) and if the TV supports the same technology, you should be able to output the internal display on TV s screen too.

• How to connect an external monitor to the hp slate 21 pro

  I have a HP Slate 21 Pro. Anyone know how I can connect an external monitor to reflect what's on my tab

  Hello

  There is no way to connect an external cable monitor such that HDMI port is entered only.

  Your only solution would be to use the wireless display option in the settings, but you would need a monitor/TV/adapter that would work as a Miracast receiver.  I'm not sure specific screens that function as receptors, but I used adapters are the PTV3000 Netgear and Actiontec SBWD100A01,.

  I hope this helps.

  Kind regards

  COWA

• Connect the external monitor to my Sony VAIO laptop Win XP

  Connect the external monitor to my Sony VAIO laptop Win XP

  thanking you in advance

  Connect the external monitor to my Sony VAIO laptop Win XP

  thanking you in advance

  Is there a question here?

  Read your manuals and find a way to use your laptop computer based on the instructions from Sony to connect external (including projectors) monitors for the laptop.  Usually a connection (as you said Windows XP where you have published, probably VGA) for the monitor and a few buttons to tell the laptop to mirror or extend the display to the second monitor.

• connect an external monitor to my Eeepc netbook

  How to connect an external monitor to my Eeepc netbook
  I followed the instructions on the support for the display menu, but a monitor turns on after the initial startup

  Hi GloriaFreeman,

  Follow the steps in the article.

  How to configure and use multiple monitors in Windows XP

  http://support.Microsoft.com/kb/307873

• Possible to connect an external monitor for laptop HP Pavilion dv4t-4200 CTO

  I have a HP Pavilion dv4t-4200 CTO Entertainment Notebook PC model # A1M02AV and it has a VGA, one port that resembles a cable port phone/broadband and one that looks like a USB port, but indented on each side down. I can even connect an external monitor? How will I know if I have more than 1 video card? In addition to the usual USB/headphone ports, I have not all ports. He says that my drivers are up to date... but I don't know even what I'm looking for. Do I need to install something or buy some kind of adapter?

  I'm trying to connect an external Dell montitor via the VGA port with a VGA cable. The monitor has power, but my laptop does not detect recognize them / it. However, when I plugged in the first time in, my laptop screen has shrunk in a square (vs the entire screen) so he acknowledged something... but nothing happened on the external monitor.

  I tried to detect through my display settings, but I have accidentally changed some display setting until the reception desk shows only 1 monitor, but not selected my real laptop screen or something or changed to be Monitor 2 (even if there is no monitor 1), so when I plug the cable into my laptop suddenly my desktop disappears and it's just a white background screen - and I cannot access the screen of the computer settings or whatever whatever... when the cable is disconnected this setting seems to be normal, so I can not understand how to fix it.

  Sorry, I don't know what I'm doing here - please help!

  Hello

  All Dell monitors are equipped with CD for the drivers. Your laptop may not know the monitor without its driver, it will not install automatically. Please check:

  Ringht click an empty space on the desktop,

  Click Customize

  Click on display

  Click on change display settings

  You can see the TWO laptop screen and external monitor in there, as shown in the following image:

  

  For the test, I put my Dell monitor is my main screen. If I can't see 2 monitors, you need its driver first and then check the cable.

  Kind regards.

• Equium L10-300: how to remove BIOS password which was never put

  Hello

  I have a Toshiba laptop Equium L10-300 which has just begun to ask a market BIOS password, which is strange, because you never have the value. I read in these forums and have found that the other models had the same problem.

  Now first of all, I was wondering if there is anyway to fix this without sending it away and if not then who can I send it to and the repair will be free?
  Thank you

  Hello

  I didn t notice such BIOS password on my laptop problem.
  However, if the BIOS has been set and that you can not connect, then you will need to contact the ASP in your country for the removal of the password! Without the help of ASP, you will not be able to use the laptop.

  But I can't say much about the cost. I think it could be done for free. Just call the guy and explain your situation.

  Good bye

• White screen on my Equium L10-300

  Hi all

  New on this site but I was wondering if someone can help me. I have an Equium L10-300 and the screen seems to start going white corners in until it becomes white. I found that by pushing on the top of the screen is the only why return to normal.

  This means that the screen is broken and it needs to be replaced completely or is it caused by another party? Anyone who can shed some light on this problem would be greatly appreciated.

  * coop thank you *.

  For me, it is definitely hardware problem. It may appear or may display cable (maybe some crack on cable or bad connection). Sorry, but I don't think there is something you can do alone. I recommend you contact the service.

  They allow to check the view feature.
  Good bye

• Equium L10-300 - how to replace the keyboard

  I recently got a Toshiba Equium L10-300 and it has serious issues of keyboard.

  Some buttons do different things they are asked (for example. The letter M is going to be transformed into letters NM or the right arrow will turn into a huge space).

  The enter/return key does not work all together and that's all I want to work really (want to format and start over).

  I tried to remove the keyboard, but he can't seem to drag out (is there an easy way out without breaking everything?).

  Any help or advice on this would be much appreciated.

  Hello

  The keyboard is fixed with screws.
  You need to remove these screws to remove the keyboard from the laptop.

  As far as I know there is a small plastic above the F1 - F12 buttons cover.
  You must remove this cover to gain access to the screws.

  After removing the screws you may carefully lift the keyboard.
  But note; the keyboard is connected to the motherboard with a flat cable. Be careful and don't use force.

• Equium L10-300 - battery failure

  Hello

  Can someone tell me if the battery isn't on the laptop Equium L10-300 it will not feed with the lead/charger pluged?

  Hello

  First of al you will get a few suggestions here in the forum if you want to be 100% sure which part is defective or malfunctions, you must contact a technician for laptop and it could check the hardware.

  Now my opinion; If the laptop lights even if the AC adapter is plugged in, then it has nothing to do with s battery but with the internal parts like for example electronic power supply on the motherboard.

  If the battery is faulty, you should always be able to use the laptop connected to the power adapter. Right?

  So I think that your problem is not related to the battery I m not sure what could be wrong, but first the adapter sector and RAM check if both parties would be ok then there must be another serious problem that I suggested above maybe motherboard is affected

• Equium L10-300: can't see my Wlan router!

  I have a laptop Toshiba Equium L10 300 with a domestic Infocomm IPN 2220 wireless network card.

  The computer is running Windows XP Home SP2 and ConfigFree. I have updated the drivers wireless to the latest version.

  I'm trying to connect the computer to an ADSL Modem Belkin Wireless G Router (model: FSD7632 - A).

  The wireless switch is turned on.

  When I update the wireless LANs in windows or configFree, I see each SSID wireless LAN on my Street (which are also 54G) besides me. I have another laptop which connects the Belkin quite happily. The L10 stubbornly refuses to acknowledge his existence.

  Anyone has an idea why this is?

  Any help much appreciated woud.

  Kind regards

  Alasdair

  Hello

  The WLan card seems to work because the other s WLan are visible.
  To my knowledge of the wireless network card integrated Ambit minPCI support 802. 11b / g wireless technology.

  I recommend you change the mode to G only. This can be done in the Device Manager-> properties-> Advanced tab card WLan

  Please also check if the wireless network adapter using the same channel as a Wlan router.

• Equium L10-300 - message "media test failure".

  Hello

  I'm asking on behalf of a friend. They recently, accidentally had a spill of liquid on the keyboard of their laptop Equium L10-300 which resulted in the message "media test failure" appearing on the screen and makes it so the laptop unusable. Apparently when the liquid was split open CD-ROM drive (coincidence?), while the player also "clicky" sounds when the case he pressed.

  Is their machine completely buggered now or maybe just the hard drive / liquid obtained in the drive? Are there recommendations for when such an incident occurs or just let it dry out and hope for the best?

  Thanks in advance

  Hello Michael

  The liquid spited in Notepad is the worst thing that can happen.

  > Is their machine completely buggered now or maybe just the hard drive / liquid obtained in the drive? Are there recommendations for when such an incident occurs or just let it dry out and hope for the best?

  Why hard drive? I fear that the defective mainborad may be responsible for this message (IDE controller). Boyfriend sorry but it is just a recommendation, contact the service and let check the laptop.

• Car/truck/plane for EQUIUM L10-300 charger?

  Please can someone tell me what loader is correct for my EQUIUM L10-300?

  Hello

  As far as I know your unit has got a CA PA3396E 65W adapter - 19V - 3. 42A
  I found a part: charger car/truck/plane laptop 90W, 3 - 5A
  Part number: PX1116E-1NPO
  But I m not really 100% sure if it s compatible with your device.
  I recommend you contact the service partner. There you can get more information
  on the compatible parts.

  Best regards

• Equium L10-300 - Question about BIOS password

  Hey all hope you can help a new user please.

  Had a customer to put in a notebook Equium L10-300. Somehow has been a password on the BIOS and start-up, so I can't do anything with it. I can't boot from a CD and I tried a USB floppy drive, it seems to the flexible time and then just operates in the password box. I was going to try a BIOS flash, you see.

  I'm guessing maybe remove battery from the bios might help? But do not know where it is or how to get to it. All links to the manuals etc. would be nice. I ve read some new Toshibas have special security chips now hold passwords etc.

  Any help would be thank you very much, really need to solve this problem.

  Mark

  Hello Mark

  If you have clients, I assume that you work for an authorized service. The fact is that each service description how to remove the BIOS password on each laptop model.
  So if you try to delete the BIOS password I can't imagine work you for some Baker. So many things on your work.

  Another important thing is that the BIOS removal procedure is kind of top secret information and may not be the subject of public debate. This information cannot be displayed here. This will be a valuable aid for all who attempt to enter stolen laptops. Do you agree with me?

  If your customer needs professional help to send him to the authorized Toshiba service provider nearest. They know how to remove BIOS password.