BlackBerry 10 contextual vibrate Mode?

Similar Questions

• BlackBerry smartphones helps, vibrate mode and ringing continues to play

  whenever I put my phone vibrate only mode, it still plays my ringtone after.

  That's my General and specific ringtones.

  so, im always silent use in place and lack of calls or texts.

  I had the same problem since I first storm last November. After many calls to Verizon and visits to several Verizon stores, I finally understood that I had to fix it myself. I created a sound custom profile with all the parameters that I would have expected the 'Vibrate' profile would have provided with the phone. When I use my custom profile, custom ringtones vibrate just like any other ringtone. If you need help setting up the profile, please reply to this message.

• IPhone 5 will silence and vibrate mode se

  Hi hope someone can help me with this

  My phone suddenly started to sound mode to vibrate mode. In this case the use of the phone or what is above the table

  I did a full restore and nothing. Please help makes crazy

  When this happens, before playing with all the other settings, I recommend you to check on the left side of your iPhone where there is a Silence switch. If you see the orange, the physical switch is market somehow when you use the device. If this problem occurs, and you will see that the orange bar is not displayed, there is a hardware problem.

  I do my assessments based on the fact that you already have a factory restore and installation of the iPhone like new with the persistence of the question.

• Vibrate mode

  It is fast way to put the droid in vibrate mode? I long for the simple switch on my Treo. Didn't even have to get out of my pocket. Why designers can't get these simple things made up? I love the Droid in general, but find this kind of confusing things. Why would someone who has used a phone smart not put the vibrate function power on a simple switch function?

  ... or...

  Download "Beautiful Widgets of Silence" from LevelUp Studio (free).  Once downloaded, do not open the app, just go to your home screen and now pressure on the Bureau to add a Widget - I used it at Church today and it works quite easily.  The widget takes the space of a single icon, you click on it (green) or off (red), simple as this and you don't have to memorize the volume settings you had before

• Change of Smartphones blackBerry quickly to vibrate and Vice Versa?

  When you go to a meeting or somewhere else, "quiet", is there a way to shortcut quick and easy to change ring to vibrate without going deep into the profile to change the settings?  And vice versa the meeting rapidly changing of the last ringtone vibrate?  Sorry for all the questions; I love this community!  Just found today!  Thank you!!  PeteRizz

  Straight to the vibration mode is not possible. However, if dial all the home screen is disabled, then pressing P on the sleep mode you brings to the profile menu. Now select the vibration mode... no sense reverse!

• Smartphones blackBerry shortcut to vibrate?

  If I'm in the regular profile Normal (active) , which is the fastest wat to switch to vibrate Mode for all calls inbound & msgs?

  Thank you.

  Hello

  I'll be back on it, there is no menu "deeper". The vibration fuction seems not to work at all.

  Thank you

  Don't forget to adjust your thread. Put the check mark in the green box containing your answer! Thank you 

• Text & Email alerts/notifications during a vibrate mode?

  Hello people! I just took the Motorola Droid this weekend and I'm having a problem with something... so here and I hope someone can help me with this question:

  While my phone is on vibrate, how is it that whenever I get a new SMS, gmail or facebook to update my phone only vibrates? All I get is a flashing that lets me know I have a new text or e-mail, but other than the light, there is no way for me to know that I have a new message.

  If my phone vibrate and someone calls me, the phone starts vibrating... but not when I get new messages... as I said, on the phone light will start to blink, but the phone vibrates to let me know I have a new message.

  I don't understand.. with my old phone (travel) when it has been set to "Vibrate" mode, the phone vibrated both when I received a call or SMS, but not my Droid. I looked in the 'manual' together and I wasn't able to find anything about alert messages and how to set up different types of notifications. So right now, I'm stuck looking at my phone from time to time to see if I have new messages. I received some messages while I got the phone on vibrate attached to my waist and I didn't know people had texted me because there was no sound or vibration notification type.

  Anyone has an idea how to set up the phone vibrates when receiving new messages when the phone is on "vibrate"?

  THANK YOU MUCH IN ADVANCE!

  under the settings of your email (I use gmail), there is a setting to vibrate when the message or something like that. and should be somehting similar to your e-mail. If these values are defined, then it still vibrates when a text or an e-mail arrives that you are on silent or not.

• BlackBerry Q10 needs a short key to swicth Q10 to vibration mode

  Please I need a short-key to quickly switch my blackberry Q10 mode vibration and return to the normal ring tone... As it does not exist in the series "BOLD" (you have only to press and hold the key "#")

  Glisser slide down on your home screen, then select Notifications. Set it to normal and close the Notifications. Now drag down and select Notifications again but this time it set on vibrate.

  Now, whenever you are in Normal mode and want to toggle it on vibrate, just slide down and tap the bell on the Notifications (not the word but just the Bell) and it it will switch to some notification you had before the current (in this case, vibrator).

  That's the best we can do for you.

• How to know the profile is changed on vibration mode in blackberry?

  Hello

  I'm tring an application where I take a label and a button.

  I want that when the user clicks this button 'Select profile' form of popup is opened.

  When the user selects the profile of vibration then the label must be set to 'Vibration On' & for other profile it is defined as 'Off Vibration'

  I tried it but that Label does not immideatly after having selected the profile.

  This is my code

  public final class MyScreen extends MainScreen
  {
      /**
       * Creates a new MyScreen object
       */
      LabelField lbl;
      ButtonField btnOk;
      public MyScreen()
      {
          // Set the displayed title of the screen
          setTitle("MyTitle");
          lbl=new LabelField("Set profile ");
          btnOk=new ButtonField("OK");
          btnOk.setChangeListener(new FieldChangeListener() {
  
              public void fieldChanged(Field field, int context) {
                  // TODO Auto-generated method stub
                  try {
                      ApplicationManager .getApplicationManager().launch("net_rim_bb_profiles_app");
                  } catch (ApplicationManagerException e) {
                      // TODO Auto-generated catch block
                      e.printStackTrace();
                  }
                  if(NotificationsManager.isVibrateOnly())
                  {
                      lbl.setText("Vibration on");
                  }
                  else
                  {
                      lbl.setText("Vibration Off");
                  }
  
              }
          });
          add(lbl);
          add(btnOk);
  
      }
  }
  

  Pleease please help me, since 1 week...

  Peter OK it works when I update the screen in OnExposed(). Now it works really well for me. SO happy

• BlackBerry Passport stuck in mode alarm and cannot be disabled. but it's only the début gets much worse

  I contacted support blackberry before about the problems with the alarm, especially that, unlike previous devices that the passport must be left switched on so that the alarm to work. which means that any owner Passport learned the hard way, if you set the alarm and power off, the alarm will be off not because the device must be on the alarm will go off.

  However, bedside mode ends up being - I don't know - "corrupt"? by being left permanently. I've known many strange bugginess of the bedside mode. but nothing like that is.

  -This morning came the cherry on top, the alarm could not be disabled.

  normally in bedside mode when the alarm goes off, you just touch the screen and it stops the vibration and noise of the alarm and goes into the screen unlock mode so you can get your day.

  but this time, he has not extinguished. It happens now for more than an hour. with a full battery (since it was loaded before calling IT a night), I estimated that the device of vibration inside will wear down or the battery will take a week or more to die.

  the Passport is designed in contrast to other blackberry phones, we can't remove the battery for a hard reset. that would have solved this problem immediately (but not my concern for her)

  without anything turning off the alarm, I tried a pass Hail Mary: turn the unit off.

  Initially, it appeared that he was going to work; He had stopped the alarm sound and vibrant and has been turned off - but then partially through this judgment, the blackberry logo came on the screen and alarm and vibrating started.

  It does not turn off, the battery cannot be removed and nothing while the aircraft was still on has been to turn off the alarm. What to do in a situation like this?

  I think that after the flood of various technical flaws, I knew within eight months of owning, this severe alarm fault has probably ruined my passport, he simply refused to let me turn the alarm off and now it is blocked in alarm mode, halfway between being off. I can't tun this return, cannot turn off, it will simply and as a mobile with tourette's.

  I really wish blackberry did not alarm system set up for turnthe peripheral turned off if you want the alarm must be activated, leaving constantly in bedside mode rather has an effect on it.

  previous mobile blackberry I had always allow you to stop, and then in the morning it goes on automatically to the alarm-it was perfect. He laso allow you to get the mobile to have to reset every night. how much is it?

  but now, given that I bought in England and returned to the Canada, I find myself now in a quandry: thousand dollar mobile is destroyed (well; it was £500 so it's a thousand Canadians), my insurance overly expensive unconditional replacement if lost, stolen or damaged is from a company in the United Kingdom, and I of course can't send it in the post for my replacement free while she is buzzing and alarming, and vibrant.

  so it'll be at least a week before the battery dies offshore, so I can do it.

  It's a nice mobile phone, by far my favorite blackberry ever but that alarm is of course quite wrong.

  If only the battery could be deleted

  I didn't have problems with the alarm as you make it.

  What should do?

  1. What is your operating system loaded on your device? From the main screen, drag to the bottom of the black bezel that is superior to the settings > everything... What is the Version of the OS that there are listed?
  2. Do NOT turn off the device to restart the device.
  3. Restart the unit in one or two of the following methods:
  • Restart: With the BlackBerry powereddevice, press and hold the power button on top about 20-30 seconds, ignore the 3-2-1 timer and hold the button until the screen goes black and you see the red LED.

  or

  • Restart: With the phone smart BlackBerry turned on, using the keys of volume of the edge side, press on and hold the keys of volume for about 20 seconds and both of the Up, ignoring the initial message of screenshot... the screen go black, reboot.

• Vibrate mode on silent mode phone on the parity of the watch?

  Is there a way to mirror silent mode on my watch when I switch my phone vibrate like do not disturb works? Also you can change the default sounds. For example, have a chime no apple app as do the Apple apps. I do not use Mail as my mail client on my phone and would like to know when I get an email by the chime sound.

  Hi Derek

  No - it isn't currently possible to mirror Silent Mode / Mute on your iPhone and watch or change the default sounds on Apple Watch.

  If you want to suggest that Apple consider adding these new features, you can do it here:

  https://www.Apple.com/feedback/watch.html

• Phone rings, even in silent mode and to vibrate mode

  Hello

  I have a problem with my Z5C as the ringtone goes even when the phone is in vibrate and 'do not disturb' - mode. When I then accept or reject the call, the phone is in "normal" mode. Messages to act normally, vibrating / being silent when it should and not to place the selected mode.

  Now, I have to set the phone to make sure airplane mode it interfere in the case of meetings.

  Anyone with advice on how to fix this?

  Similarly, the hard reset worked, until I had reinstalled all my software again.

  The culprit was my call blocking app as soon as it was installed again, the fault returned. So now I have to find a new blocker, but at least the phones works as it should again. The hard reset was when even a good thing, because it cools the phone and felt much faster and 'new' again.

• BlackBerry Z30 battery saving mode uses "location services", although not active

  Hi all

  Although exclude/disable battery saving mode settings location service monitor says the opposite. Each time that the savings mode "location services" use about 30% of all resources during these times.

  Bug or "feature"? ".

  Thank you
  Sandro

  Hmm, you can try to reset

  Turn off battery saving mode--> press and hold down the power button until the red LED is displayed, the device restarts and appearance of the logo blackberry and telephone lights--> ride on battery saving mode (with off location services), and then monitor the battery consumption again.

  Can bring back you after that?

  P.S.: Do not try the restart process if you are on a low battery due to some black screen issues that some users have on this forum.

• Wifi blackBerry 10 power saving mode

  Hi, became a new Member of Blackberry

  first of all: I'm really impressed by the responsiveness of the user interface, productivity of the phone and other features so far.

  The only point I want to ask is whther BB has a feature for wireless energy saving mode to improve the daily life of bnattery?

  Let's say that, while the phone is locked for about minutes N - wifi should be turned off. After that phone is unlocked - wifi is turned on. 'S already done it for Windows Phoine somehow but I would really like to know whethre there is sort of this feature for my z10 BB?

  Sorry, I'm a new user so please report me where I should look to the top of this feature.

  BB OS 10.2.1.xxx P.S.

  Thanks in advance,

  Valentine's day

  You can make suggestions at blackberry.icanmakeitbetter.com.

• Smartphones BlackBerry of RIM blackBerry 9220 curve - vibrate profile does not work.

  Hello RIM! :

  I have my Curve RIM 9220 for a month half and suddenly vibrate profile does not work.

  I tried the soft reset, Double Soft Reset and finally what I hated the most, is the Hard Reset.

  This phone is ideal, but with this question, I might think twice. Please help RIM. Helpsmilie::

  Hi PinoyAkoBakit,

  Welcome to the support community!

  Can you please clarify what you mean by rebooting to hot, double soft reset and hard reset?

  I would say that your database of sounds/profiles of compensation and set up your notifications again manually, without restoring these settings from a backup file. This article provides the steps to do this. 'How to clear data from the BlackBerry Smartphone user' http://bbry.lv/JtQKcw

  If this does not resolve the problem, try to back up your data and perform a clean reload of your BlackBerry® Device Software. For additional instructions, see the following KB articles.
  For Windows®: "how to perform a clean reload of the BlackBerry Device Software for Windows' http://bbry.lv/GI9beY
  For Mac: "Perform a clean reload of the BlackBerry smartphone application software on a Mac using BlackBerry Desktop Software" http://bbry.lv/J0UN1U

  Please test to make sure that the problem has been resolved before restoring all the data from your backup file.

  I hope this helps.