BlackBerry Classic view e-mail and the e-mail folders

Similar Questions

• BlackBerry classic to synchronize Contacts and calendar on 3 devices (BlackBerry Classic, PRO Surface and a laptop)

  Hello

  I have a classic BlackBerry. I try to sync my contacts and Calendar Details on 3 devices, my BB, Surface PRO and my laptop using the Link BlackBerry software. I use Microsoft Outlook on my laptop and the Surface where I synchronize from. When I connect my BB to my laptop, can I synchronize all the contacts created on my BB for the laptop and the contacts created on the laptop for my BB, even with the calendar, calendar events created on the BB will be synchronized on the laptop and vice versa. When I connect my BB to my Surface, I can do the same thing there, sync contacts & calendar events created on the SURFACE Pro for the BB and vice versa.

  What I'm looking for, it's that all contacts & calendar events created on my Pro SURFACE which have been synchronized on my BB must also be synchronized on my laptop when I connect my BB to my laptop and vice versa, as any event or the contacts created on my laptop that have been synchronized on my BB must then be synchronized on the Surface PRO Microsoft Outlook. So I try to reach that 3 of all devices must have the same calendar and contacts whenever I connect my BB device (Surface & laptop) to synchronize with the BB link.

  I would appreciate a response from anyone.

  Thank you

  Hello and welcome to the community!

  Rather than captive link, I recommend you go to OTA sync... see:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-10-OS-device-software/how-to-OTA-sync-BB10-and-non...

  Using this method, I have my email, calendar and contacts sync all 3 SmartPhones BB, 1 BB PlayBook, 1 Windows/Outlook2013 system, and a MAC (although, by introducing the MAC and it's limits, I had to implement a hybrid solution... email from HotMail, but the calendar/contacts via Google). I don't know any way to do what you want to link (and it would be more instant OTA anyway and let it do everything remotely rather than purely local).

  Good luck!

• BlackBerry Smartphones blackberry 9000 mds on server and the device (mds control center)

  Hello

  I have the following problem. We use the SDM Service on the server to push the software programmed on a few blackberrys (e.g. 8800). All Blackberrys are saved on the server in the list of mds.

  The new Blackberry 9000 does not appear in the lists of mds. And after the activation of the SDM control center is not on the device. the control center of mds push automatically by group policies. but I can't found on the device. How can I make the blakcberry 9000 working with SDM on the Enterprise Server BES services?

  We use the 4.1.4.15 version.

  I'm sorry for my English. IM German.

  Thank you.

  !! UPDATE!

  I had a contact with level 2 Support T-Mobile. They told me to download the latest firmware to the updatecenter of t-mobile (has not heard of so far), then install this software on a PC and install the MDS Runtime of this package to the devices.

  After the url of the download location, where I found the firmware:

  http://updateservice.t-mobile.NET/BlackBerry/download/download.do?ref=%2Fservices%2Fftp%2Fproftp%2FS...

  --> Download

  --> Installation for PC

  --> Start the Desktop Manager

  --> Connect Blackberry "BOLD"

  --> uninstall all the "fragments" of MDS duration of unit

  --> restart the Blackberry device

  --> Install MDS DURATION & MDS default Launcher (V 4.6.0.13)

  --> Restart device

  You're good...

  The "BOLD" today BBlackberry is a device registered and within seconds all of our MDS applications when pushed to the device and work perfectly.

  I hope this will help you too.

• Smartphones blackBerry HS-655 + wireless headset and the "BOLD"

  I have the HS-655 + wireless headset and the "BOLD" and I want to know why I can't listen to music using my bluetooth?

  You need a STEREO BLUETOOTH for listening to music, with a simple bluetooth, you can not.

  Read this link

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB04009&sliceId=SAL_Pub...

• Problems when views containing subqueries and the parentheses of engineering reverse

  I am running questions when using Data Modeler to reverse engineer Oracle views.  A problem occurs if the SQL view contains a subquery, one more question if the SQL view contains parentheses more than necessary.  Unwanted results include: views not valid, the main request being removed from view, leaving just the subquery, the schema name be stripped from the SQL and produces an error when testing the query and the view SQL completely deleted/ignored.

  Thanks in advance for your suggestions.

  Environment:

  Version 4.0.2.840 SQL Developer Data Modeler, build 840

  Running on Windows 7 Professional SP1

  Oracle Database 11.2.0.4, running on Oracle Exadata

  Steps to reproduce:

  1. the installer for the test:

  Create table 1A. for points of view

  CREATE TABLE test

  (col1 VARCHAR2 (10))

  Col2 NUMBER

  col3 DATE

  );

  1B. create a view with a subquery and parentheses "extra".

  VIEW to CREATE or REPLACE test1a

  AS

  (SELECT * FROM biuser2.test WHERE the col3 =)

  (SELECT MAX (test.col3) FROM biuser2.test

  )

  );

  1 create a view with a subquery, without the parentheses 'extra '.

  VIEW to CREATE or REPLACE test1b

  AS

  SELECT * FROM biuser2.test WHERE the col3 =

  (SELECT MAX (test.col3) FROM biuser2.test

  )

  ;

  1. create a view by specifying different column names, followed by parentheses 'extra '.

  VIEW to CREATE or REPLACE test2a (vcol31, vcol32, vcol33)

  AS

  (SELECT col1, col2, col3 FROM biuser2.test

  );

  1. create a view by specifying the names of different columns, without the parentheses 'extra '.

  VIEW to CREATE or REPLACE test2b (vcol31, vcol32, vcol33)

  AS

  SELECT col1, col2, col3 FROM biuser2.test

  ;

  2. run Data Modeler (stand alone, although the built-in SQL Data Modeler developer seems to work the same)

  Import of data, including the test table and all dictionary the views of trial 4.

  Any import, all 4 views have yellow triangle! icon indicating the points of view that must be analyzed, Parse old views of Style.

  3. right click and select "Parse of old views of Style" for each of the 4 views.

  Status of views are now:

  TEST1A: red triangle! icon

  TEST1B: disabled icon

  TEST2A: still has the yellow triangle! icon

  TEST2B: disabled icon

  TEST1A 4A.

  Right-click, selected Validate views has no effect.

  Examine the properties TEST1A

  Examine the query Query Builder

  Warning window will appear: parse error: could not parse the SQL query. Invalid SELECT statement. Unexpected token ') "in line 2, pos 7

  Click ok, the displayed query is:

  SELECT MAX (test.col3) OF biuser2.test

  )

  )

  Result of 'test the query.

  SQL:

  SELECT MAX (test.col3) OF biuser2.test

  )

  ^

  )

  Error at line 2, column 6:

  ORA-00933: SQL not correctly completed command.

  TEST1B 4 b.

  Examine the properties TEST1B

  Examine the query Query Builder

  displayed query is:

  SELECT

  TEST. COL1,

  TEST. COL2,

  TEST. COL3

  Of

  TEST

  WHERE

  TEST. COL3 =

  (

  SELECT

  MAX (TEST.) COL3)

  Of

  TEST

  )

  Results of 'test the query:

  SQL:

  SELECT TEST. COL1,

  TEST. COL2,

  TEST. COL3

  OF THE TEST

  ^

  WHERE TEST. COL3 = (SELECT Max (TEST.) (COL3) TEST)

  Error on line 4, column 5:

  ORA-00942: table or view does not exist

  Preferences for the Data Modeler: DDL: include the defined schema in DDL

  Note that BIUSER2 schema name was stripped from the SQL

  4 c. TEST2A

  Examine the TEST2A properties

  Look at the generator query of query

  No SQL appears

  Results of 'test the query:

  Nothing, if you use "test application" of the display properties window.

  Query executed successfully, so by clicking the green checkmark in the query designer window

  4 d. TEST2B

  Examine the properties TEST2B

  Look at the generator query of query

  displayed query is:

  SELECT

  TEST. COL1,

  TEST. COL2,

  TEST. COL3

  Of

  TEST

  Results of 'test the query:

  SQL:

  SELECT TEST. COL1,

  TEST. COL2,

  TEST. COL3

  OF THE TEST

  ^

  Error on line 4, column 5:

  ORA-00942: table or view does not exist

  Hello

  It seems that the problems with validate selected views and Parse old views of Style both TEST1A and TEST2A occur as a result of the view being defined with the SELECT initial placed in brackets.

  I logged a bug about this.

  Regarding the result of your Test request, you should be able to get this works using a connection that uses your username biuser2.

  When the Test Query window, you must set the login field at the top of this window to your biuser2 connection.

  In the case of TEST2A, it has "successfully" carried out an empty SQL string!

  David

• BlackBerry Z10 battery drains quickly and the phone gets hot

  I noticed that my Z10 become hot and the battery takes time to load, and when it is disconnected from the power, the battery drains quickly in less than 1 h.

  I think it said when I update the OS, but I'm not sure.

  Please, what is someone with the same experience?

  How this can be solved?

  Hello

  My phone is now back to normal.  I just removed my most recent email account and wholla high temperature went and the battery now the normal duration.

  Thank you.

• Classic phone holder blackBerry SUCKS! Poor training and the call centre in the Philippines!

  I bought a classic there is about 1 1/2 weeks and had not yet found the user guide. I called their phone support several times with simple questions and most of the time, they could not answer questions or gave me completely false answers. For example, I didn't know how to access the FM radio function and support BB told me to contact the carrier to bring them to market. I knew that the answer was wrong and once I found and read the guide to the user discovered how access FM radio. My point is that these representatives have a knowledge on the classic. They are located in the Philippines and their English skills are limited and it is difficult to communicate with them. If anyone has had this experience and anyone could explain why the BB spend the resources necessary to make these fine products and then skimp not big time on the customer support? And if BB company listen to MOVE YOUR PHONE SUPPORT EITHER to THE UNITED STATES or CANADA for YOUR CLIENTS IN THE UNITED STATES AND MAKE SURE ENGLISH IS THEIR mother TONGUE. And please do not hire someone who has lived in the United States or Canada for a short period of time and has recently learned to speak English.

  That support number is added to the support you get from your provider. The way it is supposed to work is that att with your phone number. Either they don't solve your problem, or that they degenerate to BlackBerry supported which is the same as the paid support, but if they skyrocket you, you do not pay anything. The problem is that carriers are too lazy to do the climbing when / if necessary.

• BlackBerry Classic speed dial back at the top of the call screen

  I used to have 12 contacts in the upper part of the speed of call screen to compose. Now I'm down to only 8. I try to add an extra 4 it tells me that I have exceeded the maximum number allowed. I just moved to the classic, this device was working fine on my previous 3 Q10s.

  Any suggetsions?

  If you look in the 10.3.2 the user guide, it says:

  "You can add a total of eight contacts or numbers to the speed dial list on the screen of the calls.

  I also looked in the guide to the previous version (10.3.1) and it is said you can have 12 contacts. Thus, they seem to have reduced the number from 12 to 8 for some reason any.

• BlackBerry Smartphones Blackberry won't turn on and the red light just blinks

  I have a curve 8330 and I tried to remove a set of it. He had uninstalled the game and restart box came so I said to restart and he never returned. I tried out the battery and that didn't work. The red indicator flashes just four times in a row and then stops and flashes four times and break ect... What can I do about it?

  Something is broken in the Blackberry device file system that is causing the problem.

  Device in this State is available for Blackberry Desktop Software for a very short time - when it starts.

  JL_Cmder utility to clear the memory of your device when the device is available for this short period of time.

  It is not easy to capture the moment - but we will try.

  After wipe - download the RIM OS here

  and install it on your PC. After this - connect the device to the PC, run Blackberry Desktop Software to install the OS on device.

  If that doesn't help - bring your device for repair shop to erase the memory of the device.

  There is nothing broken on the hardware of the device, it is a severe software failure.

  Unfortunately, RIM does not provide a hardware button to reset the unit to factory settings.

  Try this utility.

  I hope this helps.

• BlackBerry Z10 Z10 led flashing and the software update error code

  Hi, forst time poster and beginner, so please be nice!

  I got a Z10 for three months and today, I could not turn it on and light flashes 1-3-1 sequence.  I plugged on Blackberry link to perform a restore, and I now get an error on Blackberry link code: cannot repair because of the error: BDSLSV2RequestURL.  Any thoughts?  My carrier wants to remove it for repair, but if I can fix it, I would be happier.

  Thanks a lot for your help!

  Chris

  I think that LED Flash 1-3 is a bad battery...

• BlackBerry 5 - image with text and the background transparent resizing

  Hey,.

  My application consists of a series of images stacked on each other. Some are transparent, some are not. I use images high resolution and resize them based on the width of the screen of the blackberry that runs the application.

  I'm having some trouble resizing of images with text on a transparent background. The resulting image is not of all anti-aliasing. This is the code I use to do:

  function scaleBitmap(Bitmap bmp){
  
  int rgb[] = new int[imageWidth * imageHeight];
  bmp.getARGB(rgb, 0, imageWidth, 0, 0, imageWidth, imageHeight);
  int rgb2[] = rescaleArray(rgb, imageWidth, imageHeight, width, height);
  scaledBmp.setARGB(rgb2, 0, width, 0, 0, width, height);
  
  return scaledBmp;
  }
  

  And here are the results from a group of images resized in photoshop:

  

  Is it possible that I could improve my resize code to give better results?

  Thanks in advance!

  I found a solution and it is on these forums all the time!

  http://supportforums.BlackBerry.com/T5/Java-development/solution-for-properly-resizing-transparent-b...

• BlackBerry Smartphones Blackberry Bold 9930 update failed and the software does not load

  I have a Blackberry Bold 9930 and yesterdasy I received a msg saying to upgrade to 7.x software Blackberry. I followed the instructions (takes too long like 2 hours to download) and then. Big mistake because it cooked my phone. It seems that when you upgrade, the upgrade process goes thru, but stops after the time zone to restore the process and reports an error 602 with a reset button to reset your database. The reset button does not work and I restarted the phone to restore the db. At the moment that it restarts, launched the process, and even once, it failed after the msg indicating time zones (100% and overall restoration treatment 7%). Zones roughly completed, but then I got a msg saying I wandered 602 belive. On all courses was about 5 to 10 percent. Now my phone is undesirable because it does not restart. Verizon says they have a large number of phones across the country, but BlackBerry says it's a matter of Verizon...  Someone at - he already heard of this I am now without such a 4 days while I get a replacement Friday because of the holiday...  I am not very happy as another question, I found - during the upgrade process it used the cells instead of my wirelss home network to download the software and it really took about 2 to 3 hours, then another hour before it failed during the upgrade process. So about. 3 to 4 hours to play with an upgrade yesterday.

  Thank you

  Rich

  Hello merlin02131

  Welcome to the Forums of the BlackBerry Support

  Sorry to hear about the problem you are experiencing during the update!

  But you can still use Desktop Software for the update process, personally, I prefer never to do an Over the Air update. I think that something has gone wrong with the update process and thus you encounter this error 602.

  You have a backup of your device, or using BlackBerry protect for the backup?

  If you wish you can try several method to recover your device of this error, all you need is a PC and an Internet connection active. But attention, this method deletes the data user in this device. This is the Knowledge Base to follow:

  KB10144 : How to force detect the BlackBerry smartphone using the Application Loader

   

  Additional information:

  KB29237 : "App Error 602" appears on the BlackBerry smartphone running BlackBerry 7

• BlackBerry OS 6.0 Smartphones and the Blackberry Bold 9700

  I'm new to Blackberry, so please forgive me if this is a stupid question. I read that OS 6.0 will be out soon. I will be able to load it on my Bold 9700 from T-Mobile? If Yes, what is the best way to know when it is available? I will be able to simply connect my Blackberry up to the Desktop Manager on my computer and load? Thank you.

  No one yet can answer these questions.

  My "thinking" is that OS 6.0 will be released first on new devices. If it is the result of past experiences, you will see probably available for some of the most recent (like the 9700 devices), at some point, but no one doesn't know, and those that do, are not certainly say.

  So... my recommendation: check back around here at beginning-middle of the summer.

• View 4.5 and the smart card configuration

  Hi all

  I encountered a problem which I hope one of you can help me with.

  I install a new server connection view, v4.5 on Windows Server 2008 and everything works fine. I can browse to display administrator connect to a virtual computer by using view Client and also with a thin client. So all is well.

  The problem comes when I try to configure smart card authentication. I created a locked.properties like the documentation file, placed in the install_directory\VMware\VMware View\Server\sslgateway\conf\locked.properties has the status of docs, restart the service and now nothing. Cannot browse to the administrator of the display, unable to connect with View Client or thin client. I tried to start and stop ALL services on the machine vMware, restarted the machine and still nothing.

  I deleted the locked.properties file, rebooted the machine, nothing. If I uninstall and reinstall see connection to the server, everything is fine, but as soon as I add in locked.properties, all works again.

  The content of my locked.properties is:

  trustKeyfile = mystore.key

  trustStoretype = JKS

  useCertAuth = true

  The key file, mystore.key, was obtained using the keytool utility and copied in install_directory\VMware\VMware View\Server\sslgateway\conf, as the docs state.

  I'm just ideas on how to solve this problem.

  Sounds like something in your trust store causes a problem when you start the Secure Gateway service.

  When you started your broker with the locked.properties in place, the service "VMware View security component of gateway" stops shortly after startup? There may be an exception in the newspapers of debugging describing such a problem, near a line similar to:

  2010-12-01 14:38:03, INFO 199 generating managers trust for authentication of the client

• BlackBerry Z10 difference between guest and the data service

  Hi all

  new user of the Z10, his job very well, I just had a small problem or issue. What is the difference between data services being on vs calls in roaming? I usually use wifi, but often the mode invite, can't do the acquisition of internet connection, even though I have the data service and a G full download available.

  Any help would be greatly appreciated!

  See you soon,.

  Excellent!

  Thanks for the reply "prompt"!