BlackBerry Dev Alpha - touch screen capture?

Y at - it a shortcut to make a screenshot on the real device Dev Alpha? I prefer to use it if possible more it captures ripple.

Thank you!

I thought about it myself (by chance), it's of the +/-volume key at a time. It will take a screenshot of the screen.

Tags: BlackBerry Developers

Similar Questions

  • BlackBerry Dev Alpha Crash

    Hello

    I'm debugging my application on Blackberry Dev Alpha, but then the crash of the aircraft

    The screen looks like this

    http://sdrv.Ms/S2NR9f

    How to return to zero, so that the appliance can be used again?

    Thank you

    Ah I have to wait for the battery to run out and then load it again

    And press the Start button.

  • BlackBerry Dev Alpha insists the point on the Bluetooth connection mode.

    Hello.

    I tried several times updated BlackBerry Dev Alpha to the new firmware with the instructions on the website to update. Make sure that all the steps I did. I have tried but no luck. Desktop software did not update. I tried the troubleshooting, but I couldn't find any chance to try several times and it get messages that he has made available.

    I clicked on update and repair. When you click Repair, no fading, rather office continue to find the update software and finally sometimes found. When it concluded, Office Automation application password for the bluetooth connection (I'm sure bluetooth was disabled on device and my laptop) and it continued just as the device was only pretending to be connected with bluetooth. Then it starts to download. But even once, it never ends.

    I already have:

    > Remove the registry as indicated

    > set the USB for windows

    > enable development mode

    > set file sharing on

    > run the troubleshooting steps.

    No luck, I found . Everyone knows the same symptom?

    Yes of course. My Dev Alpha is updated at the moment. Even though she insisted update on Bluetooth connection mode, when install just re - check again if the connection is available and I just reconnect the device to continue the installation.

  • BlackBerry Dev Alpha & Cascades example 10

    I'm running through the example to create your first application Cascades with him comes out BlackBerry Dev Alpha Simulator (running on Mac OS X 10.7.3) 10 and problems to make the MyFirstApp running (I'm running the App on this page section: https://bdsc.webapps.blackberry.com/cascades/documentation/getting_started/first_app/lightning_cross... - I get the error "Cannot start MyFirstApp due error 8" on the Simulator and "Impossible to") determine PID returned to launch' error in the IDE. Has anyone else encountered this problem?

    Thanks in advance

    Simon

    Please ensure that you deploy the x 86 target and not the ARM variant to the Simulator.

    Daryl

  • BlackBerry Dev Alpha 10

    Hello

    How and where can I get/buy BlackBerry Dev Alpha 10 of?

    Thank you

    Jan

    Are provided by RIM to the developer met. They cannot be sold by the developer. The simulators are very good in testing the application.

  • Resolution of the smartphone BlackBerry Dev Alpha 10

    What will be the alpha of resolution Blackberry 10 dev device? It will be same as Simulator? How he gona be in real aircraft?

    Need for clarification

    Dev Alpha device resolution is 1280 x 768. The real device resolutions will be as follows:

    1280 x 768 for the first full touchscreen device
    1280 x 720 for future devices full touchscreen
    720 x 720 for models with a physical keyboard.

    More information about this is located in the following developers blog:

    http://devBlog.BlackBerry.com/2012/08/BlackBerry-10-screen-resolutions/

    I hope that info helps!

  • The driver installation failed BlackBerry Dev Alpha 10

    When I plug my dev alpha bb10 into my computer, it says driver installation failed. Office software Blackberry cannot pick it up. What should I do?

    Try going into the menu alpha dev (small gear top-right).  Go to storage & sharing.  Set the «Connect to Windows» USB connections

    Who can help, mines on auto and never given trouble.  There's a first time for everything.

  • BlackBerry 9800 Smartphones Touch screen does not

    as mentioned in the subject

    am having a problem with my torch 9800 sensitivity to the touch screen does not work. I tried formatting than her apps, but still nothing is happened

    also it restarts automatically several times and it is the fact that it is difficult to do something to solve the problem of the screen

    Please I need your help for this problem

    Try a battery pull if you please, with the BlackBerry device powered on, remove the battery 15 seconds and then reinsert the battery to reboot the device. This will clear all hide as restarting a PC. Then try again and see if the problem persists.

    What OS are you on? On your device, type a new message MYVER and a space after to see and report please.

    On device, go to Options, device, application management is a great way to see what your applications with your use of the CPU on Smartphone. Simply drag bar greater than CPU and see what happens. Also touch the CPU menu to see other time variables. I discovered that an application has been eroding CPU cycles on my own

    Disable Compression on the memory card? go to Options, device, storage

    using a custom theme? Try it for a day that factory by default to avoid your theme

    remember the ESC key to close most applications, with the exception of GPS and some chat clients. other applications must use the menu and then exit or close. The key furthest to the right is a key to the House and does not close on its own apps, but will put an end to the calls.

    If the above does not work then maybe in running a new OS is in order.

    Manual device OS upgrade instructions:

    1. start by searching for your operator and the system operating file that you want to use.

    http://NA.BlackBerry.com/eng/support/downloads/download_sites.jsp

    2. make a backup of your device first, using Desktop Manager > backup. Close at the end Office Manager and disconnect it from BlackBerry. Get DM here http://us.blackberry.com/apps-software/desktop/

    3. download the OS files to the PC then install on the PC by running (double click) the downloaded file.

    4. go into c:\program files Research in motion\apploader and delete the file named "vendor.xml."

    5. This step is not necessary unless there is a problem on the next steps. Use BBSAK from BBSAK.org and wipe the device (after doing a full backup), then after you get the 507 error (no OS installed) then proceed to step 6

    6 remove the internet connection for PC and reboot the PC.

    7. plug the BlackBerry and double-click on "Loader.exe." It is located in the same place as the above vendor.xml file was in.

    8. If you did step 5, restoration of the back upward. Follow this KB if necessary http://www.blackberry.com/btsc/KB10339

    Take advantage of the new operating system.

    If after all this then maybe you have a problem with your device and will need to contact the place of purchase if under warranty still.

  • BlackBerry torch Smartphone touch screen and Smartphone password

    Hello!

    I activated the smartphone password to lock my bb when I try to unlock the mobile by the keyboard to touch screen, I still get a wrong password error! If I use the keyboard, everything works fine!

    I tried to update the software (I have the latest version), tried to recharge the mobile, to restore the operating system... But still the same problem!

    Thank you in advance for your help!

    Ana

    I bet you think that it is in numbers on the keyboard, while they are letters.

    don't forget to use a number your must hit the ALT key first

  • Menu popup blackBerry Smartphones No touch screen

    This use to work properly, so I have no idea of what I did.  I use to be able to hold my finger on the screen and get the pop-up menu, now nothing.  It still works if I hold the trackpad, but nothing when I hold my finger on the screen.

    All the other features touch screen seem to work well.

    I appreciate any help/suggestions.

    Thank you!

    I have no problem with it on my end.  If it used to work, he'll probably be corrected with a battery pull.

    With your phone, remove the battery, then replace a minute later.

    Let us know if that does the trick.

  • Shades of Smartphones blackBerry for keyboard (touch screen, mode)

    Is there a way (or any application) such that you can switch on a tone of click for the touchpad?

    Thank you

    Hello

    Follow these steps:

    Go to Options-> typing and entry-> keyboard-> then uncheck/check the box indicating ""(décocher pour arrêter la vérification n de la tonalité deles de touches pour commencer la tonalité deles de touches)... keypad tone ".

    This should solve your problem...

  • Boot device blackBerry Dev Alpha 10 loop


    I had the same problem but I have a kind of a solution here my Dev aso in a loop when I tried to start it, but it only has is spent qhen I unplugged the charger.

    Try it, start your devide WITHOUT unplugging the charger, which has worked for me several times. Hope this works for you.

  • BlackBerry 9550 Smartphone touch screen buttons not working not

    I've been around and with the customer service on this - the buttons on the lower right corner of my phon (including red buttons and return) do not work.  I pulled the battery several times and wiped the phone, making it very well run for an hour or two before the return of the problem.  Customer service insists that the problem is related to the data in my phone (?), which is ridiculous.  They keep encouraging me to upgrade, but I don't have the phone for a year! Is the product of the touchscreen just useless and I should get a "BOLD"?

    Well I finally gave up and ordered the replacement phone.  Can not say that this is not new, frankly, and works as it is, so that was the point.

  • BlackBerry 10.0.09.1675 Dev Alpha Loader not found

    Someone check it please?

    The URL on:

    Update the software of the device BlackBerry Dev Alpha 10

    Does not work here.

    The charger is not download for me either. Give him a little time since they just went live with it if.

  • How to install the BlackBerry Java application in BlackBerry 10 Dev alpha

    Hello

    Does anyone know how to install the BlackBerry Java application in BlackBerry 10 Dev Alpha. I am able to wear an Android app in worms BlackBerry Dev Alpha 10. But there is no idea to install application developed with BlackBerry Java SDK 7.1 in verse 10 BlackBerry Dev alpha.

    Thanks in advance.

    I guess what pradeep_ch is correct,

    FYI,.

    http://supportforums.BlackBerry.com/T5/Java-development/DevCon-update-BB-Java-is-dead-no-Java-suppor...

    Thank you

Maybe you are looking for

  • News update of the firmware that corrects Toshiba 32TL933K

    Hello I found a forum of French to a firmware that fixed my 32TL933K. https://app.box.com/s/9jknysmzvlwfa3e93ek7 Copy all 3 files on a 4GB max, FAT32 usb, than rename rename the .bin file format according to this rule:Name of the model followed by Pa

  • HP Pavilion Ultrabook 15-b005eo - software, driver downloads & User Guide

    Hello! I bought this phone last week and I'm unable to find software and driver downloads on your site. I can find the product page, but when I click on the "technical support / user guides" link I get a message referring me here or contact customer

  • Satellite C70D - how to start from the DVD

    HelloYou just bought a Satellite C70D with Win 8.1. Everything works (as much as I know to knowledge), except start it from the DVD. I disabled the Secure Boot in the bios and changed the boot order on a DVD first, then USB and HARD drive. The DVD pl

  • Updated to the Server 5

    I will start by saying that I am in no way educated on from a server or a maintenance of way I should be. This may be the problem #1. The company I work for just improved servers to a box of MacMini running 10.11 and Server 5. I created a folder on t

  • Canon T1i photos: Red led Busy, seeds of the screen

    I have a Rebel T1i. It focuses, and then when I break the shutter button to take a picture it is red 1) busy seeing lights up for 3-10 seconds then go back to the main screen, but no image was taken or 2) will a screen looking for glitch and stays th