BlackBerry PlayBook-deploy author does not error

Similar Questions

• 500 the application author does not match the author token of debugging

  My name is Jean-François Geyelin. My application name is PewPew.

  When you try to run PewPew on a playbook, I get the error "500 the Application author does not match debug token author.":

  the command deploy blackberry - installApp-password abdelkader 192.168.1.37 - package device-Debug/PewPew.bar returns:

  Info: Send request: install
  Info: Action: install
  Info: File size: 3575023
  Info: installation...
  Info: Treatment 3575023 bytes
  actual_dname:
  actual_id:
  actual_version:
  result::failure 500 the Application author does not match debug author token.

  I did check the following:

  the blackberry-nativepackager - listManifest PewPew.bar command returns (among others):

  Package-author: Jean-Francois Geyelin

  Package-author-Id: gYAAgPqb4i9DBQ-DjR0zWsAWK8s

  blackberry nativepackager - listManifest library/Research\ In\ Motion control / debugtoken1.bar returns (among others):

  Package-author: Jean-Francois Geyelin
  Package-author-Id: gYAAgPqb4i9DBQ-DjR0zWsAWK8s

  What should I check or what is the problem?

  
  

  Problem solved by clearing and forwarding of the token of the device debugging.

• 881 failure: The Application author does not match debug author token

  Hey guys, I'm a newbie at software development and don't know anything about the other languages except HTML and CSS so I decided to try the apps program to see how it works and if it's the right think for me. I received my 'key' for the playbook and generated and download the Debug Token. My first idea was to put the Hello World app (that I copied on the BB site) on my playbook to see if everything works, but every time I try to download the app, I get "the application failure 881 author does not debug author token.

  I have tried a few troubleshooting myself (make another Debug Token, adding the and a blackbery - tablet.xml with these fields in the config.xml file and) and still nothing. Do you know the guy what is happening and what should I do to solve this problem, so I can download my apps on my playbook?

  Thank you

  Oskar

  There is an easier way... and maybe just an alternative.  I had this problem before and the reminder to change the bbwp.properties file to run.

  For more information, see this page:

  https://developer.BlackBerry.com/HTML5/documentation/runnning_unsigned_apps_using_a_debug_token_1866...

  Copied from this page:

  For PlayBook OS applications

  1. In the SDK BlackBerry WebWorks for BlackBerry Tablet OS installation folder, navigate to thebbwp\bin folder.
  2. Using a text editor, open the bbwp.properties file.
  3. Add the path to the file to debug token using the debug_token > tags.

     path to debug token file
     

  Example: file bbwp.properties with the path to the file debug token

  
  
  -quiet
  C:\Program Files\Research In Motion\BlackBerry WebWorks SDK for TabletOS 2.1.0\jre
  AirAppTemplates
  AirAppTemplates
  C:\Program Files\Research In Motion\BlackBerry WebWorks SDK for TabletOS 2.1.0\bbwp\blackberry-tablet-sdk
  ext
  C:\my_debug_token.bar
  
  

  You can now load your app on a debug-enabled BlackBerry device without having to sign

• Outlook express does not error _ code download new emails 0x8007000E

  Outlook express does not error _ code download new emails 0x8007000E

  out of memory?  a lot of memory!

  Go to file | Identities and setup a new identity.  Then when it works very well, use a file | Import | Messages to bring them from the old identity.  This gives a basis for new and incompetent messages and should fix things.

  Steve

• To run all the applications of the laptop or install download applications works does not error message indicating that the application is not valid "win32.exe or win32.application.

  To run all the applications of the laptop or install download applications works does not error message indicating that the application is not valid "win32.exe or win32.application.

  Hello m.velentino,

  Not sure if you are still having the error message isn't valid win32.applicaiton.

  Get the error: not a valid 32-bit application can have several origins:
  I have listed some of them below.

  The file is corrupted, bad or missing.
  -If the hard disk is damaged or hurt it cause work programs to fail, either because not all data can be read from the hard drive the program is damaged on the drive. Run scandisk and defrag on the hard disk to check for potential errors.
  -If you run the program from a shortcut on the computer, verify that the program is still on the computer. In some cases if the program is no longer installed on the computer, you can get this error.

  File is not designed for your version of Windows:
  -If you try to run a program that is not designed for your version of Windows, you can get this error.
  -Although many old programs designed to work in older versions of Windows will work with new versions of Windows, unfortunately, not all programs will not work.
  -If the program is an MS-DOS program more former start program or Windows, you can get this error.
  -If the program is designed for a 64-bit version of Windows and you are running in a 32-bit version of Windows, it will not work and generate this error.

  File is a virus, worm or other malicious program file.
  - This error can be generated by a file that is a virus, worm, Trojan horse or other type of malware file. Often, this will result because the antivirus installed on the computer will not allow the file to install or run. Try to analyze the file to check, it is not a virus or infected.
  -If the file has been checked and is clean, it is always possible that the virus protection program or a another program installed on the computer is at the origin of questions during installation or execution of the program. Start the computer in Mode safe and try to run the program. start the computer in Mode safe will be that nothing is running in the background that could cause this problem.
  
  Hardware incompatibility.
  -If you get this error during the installation of a program, it is also possible that the CD-ROM drive or the drive that you are installing the program from is not compatible with Windows or has drivers that are not compatible with Windows.
  -Download the latest drivers for your CD player or other of the manufacturer of the computer or the manufacturer of the equipment. (Microsoft does not pilot for other materials)

  Let us know if these suggestions help you.

  Marilyn

• BlackBerry Smartphones Blackberry 8520 wiped and does not show error 507

  Hi, I recently wiped my blackberry 8520 OS with BBSAK and started to install another OS, in the process, the USB cable somehow has been disconnected and installation has failed. Now the phone just to start, turn on for about 3 seconds shows nothing and then turns off. It does not show same error 507. Help, please

  Hello and welcome to the community!

  You may need to use these tips:

  • KB10144 How to force detect the BlackBerry smartphone using the Application Loader
  • KB27956 How to recover a BlackBerry smartphone from any State
  • http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry

  Good luck and let us know!

• BlackBerry® Q10 Q10 email does not

  I got my Blackberry Q10 for a few months and was in love with it... until recently when I started having issues by e-mail.  Currently, I'm completely unable to send mail from my POP3 e-mail address business - which completely defeats the purpose of having a smartphone.   I updated the software, rebooted or shut down cellular and wifi... nothing seems to work.

  I receive emails on my smartphone and send using GMAIL, but I can't send through my POP3 server.   My email works fine on my desktop.  What is particularly annoying, is that it does not give an error message does not seem to do anything.  NO checkmark, just an envelope which makes it look like a sent email received.

  Anyone else having this problem?  Any resolution?  Please, I want to continue to support BB but I need help.

  Welcome to the forums,

  Your SMTP has a password as on an update, it is common for passwords does not restore?

• BlackBerry Facebook Newsfeed Z10 does not not on Z10

  Hey guys - need help!

  I noticed a number of posts here over the past days on the application Facebook does not the news correctly. I had this problem for about 2 days, right to the point (literally) when he suddenly started working again without my nothing at all.

  Does anyone have an idea what is happening?

  The error on the screen indicates a connection failure, but all other screens are available to you (your own profile page, other pages of profiles users FB, settings, etc.), it just does not connect to the news.

  Odd, works now, but I'd like to know what the problem was / is.

  Peace and Love

  Hey jonniewaps,

  Welcome to the community of BlackBerry Support Forums.

  Thanks for the post.

  I am pleased to hear that the problem is solved.  This can result from an error in connection to the Facebook API servers.  If it happens again please let me know.

  See you soon.

• Smartphones blackBerry device software upgrade, does not (Bold 9930)

  Bold 9930, Verizon,.

  Everything was going well 5 hours ago. Backup and synchronization with Desktop Manager and everything was good. I clicked on the 'Device upgrade' link. He me everything first download and install the new Desktop Manager software. This seemed to work properly. Then it downloaded the new software device and conclusive to upgrade of the unit.

  7.1 bundle, 2705 (v7.1.0.991 platform 5.1.0.678)

  The Setup program indicates that the new software has been installed, and then it seems to want to reboot the device. The device never returns, ends with an App error 606.

  I loaded the cool device software, without change. Removed Software Desktop, loaded fresh, then loaded a fresh device software, without change.

  I tried to load my old device software but the Desktop Manager will not allow him.

  I reloaded software device 3 times, always the same behavior, always the same error at the end.

  I'm out of ideas.

  Any help?

  Hello and welcome to the community!

  brunostyle wrote:

  I tried to load my old device software but the Desktop Manager will not allow him.

  This bit is quite unusual... done correctly, you can force any OS on your BB package as long as it's your exact model number. So I'm not sure if you're really using all the good stuff... so, even if a lot of this will be redundant, please examine carefully for subtle tricks do you need to... done correctly, this can heal the situation. But any errors on the way (not ignored, stage not completed correctly, etc.) invalidates the whole process and translates the automatic process of support and limited to only the OS packages currently supported by your specific carrier.

  The easiest way is, on a PC (you can not do on MAC):

  (1) make sure that you have a current backup and your BB complete... you can find the instructions at the link in my auto-sig below.

  2) uninstall all the BB OS packages from your PC,

  (3) make sure you have the BB Desktop Software already installed

  • http://us.BlackBerry.com/software/desktop.html

  (4) download and install on your computer, the BB OS package you want:

  • http://us.BlackBerry.com/support/downloads/download_sites.jsp
  • If all you want are the levels of BONE, it is first sorted by carrier - the carrier supports, your search will be fast. However, some carriers are much slower than others to release updates. To really get the package up-to-date OS for your BB, you need to dig through and find all businesses that support your specific model BB and then compare the BONE levels they support.

  5) remove all copies of the SELLER on your PC. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

  • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
  • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

  6 (a) to change your level of BB OS installed (at level or lower), you can run the Desktop software and connect your BB... the software should offer the operating system package you have installed on your PC.

  6 (b) or, for recharging your BB OS level installed as well to change, work around the Desktop software and use the CHARGER. EXE directly, through step 2 in this process:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-device-software/how-to-reload-your-operating-syste...
  • Note Although written to "recharge" and the storm, it can be used to upgrade, downgrade or recharge any BB device model - depends on the operating system package you download and install on your PC.

  If, during the process of 6a or 6 b, your BB has an error '507', simply unplug the USB of the BB cord and reinsert it. do nothing else... This should allow the installation to continue.

  You can also study the use of BBSAK (bbsak.org) to perform the wipe what he is capable.

  You can also try the "skeleton OS Reload procedure" in an attempt to circumscribe the precise causal element:

  1. Load your OS "bare bones"... If everything is optional, do not install it.
  2. If the behavior is immediately, then try another OS with step 1
  3. If the behavior does not immediately, then run for as long as necessary to make you to be sure that the behavior will not occur.
  4. Add one more thing - no matter how tempting, one.
  5. If the behavior does not immediately present, and then runs for long enough to be sure he won't have the same problem
  6. Repeat steps 4 and 5 until all things are responsible or the behavior presents

  When the behavior shows up, you know the culprit... the last thing you have loaded.

  If the behavior doesn't re-present, then you know that step 1 or 2 cured it.

  If the behavior has anything, then you have probably a problem of material level for which no amount of OS or software can heal.

  You may also use these tips:

  • KB10144 How to force detect the BlackBerry smartphone using the Application Loader
  • KB27956 How to recover a BlackBerry smartphone from any State
  • http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry

  If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

  • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

  Good luck and let us know!

• Bug in blackBerry Smartphones: 9790: Wikitude does not and can not be upgraded

  Bug: 9790: Wikitude does not and can not be upgraded

  Priority: Low (assuming that no one will use Wikitude now anyway)

  Severity: low

  Note: I understand that this is not an application of RIM, but it is an application preinstalled in BlackBerry Bold 9790, so please take care of this. I tried to document the issue as much as possible.

  I can not re - test, simply because I don't know how to install the old version. So, these are the steps that I went to join bugs:

  (1) have a 9790 Bold with the BlackBerry OS 7.0 as it was officially sold

  (2) Upgrade Bundle 2466 (7.0.0.609 Platform 9.16.0.77)

  (3) fully upgrade all official software from RIM AppWorld (Protect, Facebook, etc)

  (4) to set the phone to use location services

  (5) launching Wikitude

  YOU CAN SEE:

  Wikitude starts and appears the window ' Version is no longer supported. " Please update"and the OK" "button.

  6) click on the OK"" button.

  COMMENT: Wikitude closes and opens the browser with the URL:

  http://blackberrydl.Mobilizy.mobi/Wikitude.jad

  Two buttons appear: 'Download' and 'Cancel' and box "application Set permissions."

  (7) check them "Set application permissions" box (same end-test result is observed with this box unchecked)

  8) click on the Download"" button.

  You can observe: window: "Wikitude: Wikitude GmbH contains a module called Wikitude.» A module with this name already exists in the application "Wikitude". If you continue "Wikitude" will be replaced by Wikitude:Wikitude GmbH. proceed? »

  Buttons 'Yes' and 'No' appears.

  9) click on the Yes"" button.

  Observe: Download process begins, download file with a size of 4366 KB

  You can observe: after the success of downloading a new window appears with the message 'Error' and 'Ok' and 'Détails' buttons

  10) click on the button "Details".

  You can watch: new window with the message "Invalid COD" appears and buttons "OK" and "copy".

  11) click on the OK"" button.

  You can observe: the window is closed and "Wikitude" application is not installed.

  Thank you! Problem solved. Here's what I did:

  (1) Wikitude uninstalled

  (2) installed from AppWorld Wikitude

  Result: Wikitude runs successfully

  (clear the cache of the browser and try to download browser do not work)

• BlackBerry smartphones get Images does not

  Hello, all. Until a few days ago everything worked properly. Now when I want to download the images in an email, nothing happens. It does not even show the download icon. And the possibility to get the Images went unless I have move to the text gross and back or leave the email and open again, but there is still nothing if I try to get pictures once again. Thanks for any help!

  Perform a simple reboot on the BlackBerry this way: with smart BlackBerry poweredphone, remove the battery for a minute and then reinsert the battery to restart. A reboot in this manner is prescribed for most defects and errors of operating system, and you will lose any data on the device doing so.

• BlackBerry smartphone touch screen does not work, 2 phone... Torch = junk

  It's my 2nd my first Torch torch touch work stoppeed and ATT sent me another...

  Now this torch touchscreen stopped working, so far, I did a reboot hard and soft...

  now I can do a factory reset or downgrade...

  IM starting to think that the torch is undesirable.

  Well, I talked to ATT tech support and I actually finally got through to BB and they open a case and gave me a number of good ticket for 3 days...  The first tech support was a dunce and she told me that 7 hours was taken long to upgrade software, so she told me to unplug and re install...  That solves nothing, only bricked my torch, even though she was right about one thing 7 hours is far too long, but it does not solve anything...

  then I recalled in support of BB using my ticket number... and here I actually spoke to somebody who knew what he was doing...  We connected through desktop remotely, and he guided me...

  He told me to never update device software when the software asks you to update...  I told him, I was getting a white screen and it says App Error 200...  He told me that we have a clean wipe and install everything new facility...  He has directed to the site from ATT and I DL the latest peripherique.246 software...  Then after it DL'ed I installed;...

  then he had me to connect the device again AND GO INTO PROGRAMS CAN record B\LACKBERRY

  then find charger, here, he had me select the apps I would like to, and then click Next...

  then after 5 minutes it finished loading, he then told me to wait another 10 minutes for the device to reboot and then my torch works!

  If anybodys touchscreen doesn't work more or torch is made of bricks, I highly recommend doing this procedure...

  I called BB again and had them send me an email for accurate insrucions, so I recorded in case this happens again... Here it is...  Keep in mind first you need access to the ATT site will link you to the site Web de Blackberry and then DL file then open and install and do the following...

  Check that the device client software is installed on their computer, or it won't work.
   
  1. click on the start menu
  2. go in my computer
  3. go in: C:/Program Files/Common Files/Research in Motion/Apploader
  -If its 64-bit windows, it will be C:/Program Files(x86) /Common Files/Research in Motion/Apploader
  4. double-click on "loader.exe" (it may be called "loader" according to windows settings)
  5. a window opens saying "welcome in the application loader wizard." Click next
  6 next, where it is written 'Connection' to ensure that either "USB - PIN:" or "USB - PIN: UNKNOWN" appear. ""
  7. click on next. It take a while to connect to the device and then view the Application selection screen.
  -L'application selection screen will be a list of application control.
  -Items that are checked will be installed, if they do not already exist on the device.
  -Items that are not checked will not install, and if they already exist on the device they will be deleted.
  8. ask the customer to scroll through this list and check all applications they know they would like on their blackberry.
  9. once everything looks good, click Next.
  10. click on the Advanced button.
  11. make sure that 'remove all previously installed applications' and "Delete all application data" is checked.
  12. click Next.
  13. If loader.exe asks you if you want to automatically back up and restore data, select "do not automatically backup and restore."
  14. click Next and then finish
  15 advise the customer that this process can take anywhere from 20 to 40 minutes, and everything they do during this time is to ensure that the blackberry is connected. The first time that their blackberry starts after this process, it will stay on the screen of the hourglass for about 10 minutes, nothing to worry about.
   
  Once the client can see the home screen of their blackberry, they're OK disconnect.
  The customer will have to re - turn on their radio, they can do so by going to manage connections > select Mobile network

  Sincerely,

  Sarah
  BlackBerry customer support
  Research In Motion Limited
  Tel:
  NA toll free: 1-877-255-2377
  UK toll free: 0808 100 7466
  Europe: + 44 1753 558400
  Around the world: + 1-519-888-6181
  E-mail: [email protected]
  Web: www.blackberry.com

• BlackBerry Smartphones camera works does not suddenly

  Hi all

  I tried to take a picture yesterday to find that when I select the camera on my phone, I have just a white screen and the camera icon is gray shaded and cannot be hired?

  I always get the flash and geo tagging icon / scene mode icons and I am able to use them simply not capture icon.

  I had a range of different messages arrived saying that another application is using the camera etc and when I select video camera I get the message "the camera is use by another application, cannot start the video camera viewfinder."

  I ran the self test (which was a bit pointless) and he has just confirmed that the camera was not working.

  I tried to pull the battery with the phone on, but that does not solve anything.

  At my phone plugged on charge last night and when I woke up this morning and turned on I checked the camera again and it seems to work!

  I could take a picture and then I just got the blank screen again and were not able to make it work again since.

  I have not recently added all the apps or made any changes to the phone and it seems to have happened completely at random, as I did nothing extraordinary.

  I would really like to solve this problem without having to delete and re install the OS if possible but its is not in good shape.

  BlackBerry Torch 9800

  6.0 bundle 2647 (v6.0.0.600, platform 6.6.0.223)

  Look forward to any help that anyone can provide.

  Thanks for the tips, but for some reason any 9th / 10th (I lost count) battery pull I've done seems to have done the trick.
  Left the battery for an hour and the camera has been authorized since!
  Appreciate your response and good advice

• BlackBerry Curve 9300 Smartphone does not start. Stucks at the splash screen

  Hello

  I have a brand new Curve 9300, and within a week he is a. I updated its OS to version 6, and it worked perfectly.

  When I tried to configure my email, he asked automatically updated with the installation of my e-mail service provider software. I chose just ok. I received three warning messages, which I don't know exactly but it was something may not work correctly (with respect to the difference in version). I just kept facility, and he asked to reset.

  When I restarted the laptop, it goot stuck to the start screen. Then nothing! The thin status bar below fills BlackBerry logo until either full, nothing happens. When I wait more long (a few minutes), I get a message on a white screen with a small font with "App Error 606", with an option to "RESET".

  I took out the battery and restored a few times, nothing different.

  Notes:

  • The LED does nothing, except for a single red wink when it restarts
  • The keboard seems to be sensitive. I get the Alt and shift indicators at the top right when I press on the
  • The power button does not appear to cause any response

  I appreciate your help.

  Edit: Desktop software indicates that the device is not connected, even if it is attached to the USB cable.

  Edit: The combination Alt + Shift + Delete causes the system to go to a blank white screen with this "app" error mentioned above

  You use BBSAK or JL_Cmder to wipe the device and then load the operating system on the device. Follow the instructions here:

  http://www.BlackBerryFAQ.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F

• BlackBerry smartphone App World does not connect to the App World Server

  • Carrier - Verizon
  • Curve 8330
  • OS 5.0.0.230
  • App World 1.1.0.23
  • BIS

  After loading App World on my curve, the program will load, but does not connect.  I get the error "BlackBerry App World is had problems to connect to the server BlackBerry App World.  Check your network connections, and then try again. "My network connects aren't working very well and all the other programs have NO problems to connect to their servers.

  Uh, Yes?

  but really, nevermind.  the last reslease for app world works fine.