BlackBerry smartphone how to set the Auto Mode bedside when loading?

Similar Questions

• BlackBerry smartphone how to set the phone lock and password

  I have a new "BOLD" of BB and have forgotten how to program the phone to lock automatically after not used to say 5 or 10 minutes.

  You don't say what model # of "BOLD", so these may vary...

  Options > Security > password.

  Set the password and the amount time to before the device itself is locked.

• Satellite M70-159: how to set the APM mode on the HARD drive?

  Hello.
  I have Toshiba M70-159 and I have problem with my HARD drive. My power to drive (FUJITSU MHV2060BH) down from 2 to 5 min... I put in Toshiba Power Saver "Never."
  I now read http://www.fel.fujitsu.com/support/disk/manuals/m60_product_manual.pdf and I see maybe APM I put.
  How can I configure Mode APM?

  1.11 advanced Power Management (APM)

  The hard disk automatically switches to the mode according to energy saving the
  setting the APM mode under the inactive state.
  The APM mode can be selected with a number of sector register of ALL
  Control FEATURES (EF).
  The disk complies with the three types of modes of the APM which a command
  from the host is necessary.
  EN = 05 h: enable APM
  SC = C0h - FEh: Mode-0 Active Idle? Idle low power
  SC = 80 h - BFh: Mode-1 idle assets? Low power idle (default)
  SC = 01 h - 7Fh: Mode-2 inactive assets? Low power idling? Standby
  EN = 85 h: disable APM (Game Mode-0)
  Active Idle: The head is in a position of extreme inner disc
  Middle. (VCM Lock)
  Overview of the unit
  1-14-C141-E224
  Low power Idle: the head is unloaded the disc.
  The spindle motor.
  Standby: the motor stops.
  In Mode APM-1, which is the default APM mode, operational status moves until it
  Finally reached "low power idle."
  Table 1.7 Advanced Power Management
  APM mode
  Idle assets
  (VCM Lock)
  Idle low power
  (Unloading)
  Standby
  (Spin-off)
  Mode-0 0.2 to 1.2 s min. 15 s/o
  Mode-1 0.1 to 0.2 sec 10.0 - dry 27.5 n/a
  2 mode 0, 1-0, 2 s 10.0 - dry dry 27.5 10.0 - 40, 0
  When was the maximum period during which the hard disk waiting for orders
  exceeded:
  Mode 0: Mode shifts affection Active Active Idle in 0.2 to 1.2 and low
  Inactive power in 15 minutes.
  Mode-1: Active status to Active Idle mode in 0.1 to 0.2 seconds and
  low power idle in 10.0 - 27, 5 seconds.
  Mode 2: Active status to Active Idle mode in 0.1 to 0.2 seconds and
  low power idle in 10.0 - 27, 5 seconds. After 10, 0-40, 0 seconds in
  Low power idle mode goes into sleep mode.
  Note:
  The default values for these settings are reflected in the values of WORD 91 of the
  Command IDENTIFIER. In addition, APM mode is initialized with the Mode-1
  (the default) to power off.
  The above mentioned is time until the transition to each mode of power based on the point
  that the reader becomes a State of waiting for order.

  How can I set Mode APM to disable EN = 85 h: disable the APM (Set Mode-0)

  Where do I put? Please help me.

  Hello

  You can use either the Toshiba Power Saver that controls also the APM mode or you will remove him this tool and then you will use the Windows power management.
  Here, you can change the settings for the APM mode.
  Unfortunately the other options to disable the APM Mode are not known to me.

• How to set the timeout of read when using channelReader.ReadWaveform?

  I'm using a USB-6210/a. data acquisition, and it works fine until I have to take a longer than 10 s waveform.

  When I take a longer than wave form, I get the error 200284, "some or all of the requested samples are not yet acquired.  To wait for the samples become available use longer read timeout... »

  No problem, I thought, I'll just put a longer period.  I searched through the documentation, and the timeout only I found was the watchdog timeout.  When I wanted a longer value, I get code 200452 State - specific property is not supported by the device or is not applicable to the task.

  I use the code in the example AcqVoltageSamples_IntClk.2008 .net with c# in Visual Studio 2008, .net 3.5 sp1.

  How to set the timeout so that ReadWaveform() is not the time?

  Here is the code:

  privateAnalogMultiChannelReaderchannelReader;

  privateAnalogWaveform awf;

  publicList GetWaveForm()

  {

  Try

  {

  Task getWaveform = newTask();

  getWaveform.AIChannels.CreateVoltageChannel (Channel,"", TerminalConfiguration, RangeMinimum,

  RangeMaximum, AIVoltageUnits.Volts);

  getWaveform.Timing.ConfigureSampleClock ("", SampleRate, SampleClockActiveEdge.Rising,)

  SampleQuantityMode.FiniteSamples, NumSamples);

  getWaveform.Control (TaskAction.Verify);

  channelReader = new AnalogMultiChannelReader (getWaveform.Stream);

  AnalogWaveformdata = channelReader.ReadWaveform (NumSamples);

  AWF = data [0];

  samples As new List();

  for (inti = 0; i)

  returnsamples;

  }

  catch (DaqExceptionexception)

  {

  MessageBox.Show (exception. (Message);

  }

  List of l = newList();

  return l;

  }

  Thank you

  Curt

  Hi Curt,.

  Here is a Knowledge Base that can help you to set the timeout setting in your code:

  The property using Timeout of DAQmx task in Visual Studio

• How to set the size of default when page scan document in

  How you set the default page size in the analysis in the document

  I found the answer in the Acrobat/kb/scanning-letter-size-documents-results-in-legal-PDF

  It's in PDF format by Scanner > Scan button click Options customized to the right of the name of the scanner.

  From here he choose Show the Scanner's Native Interface.   Then choose the correct page size

  which is shaded on so I couldn't choose.  It worked in all cases.

  I have Acrobat XI and Photosmart HP 7520.   Thanks for the replies.

• How to complete the list of values when loading screen

  Hi all
  
  I have a list of values based on another field (ANOTHER_FIELD).
  
  for example
  Select the value d, r
  from table_name
  where id =: ANOTHER_FIELD;
  
  ANOTHER_FIELD has a default value.
  
  But when the screen is opened to the list of values does not have the default value and the values list is empty.
  Just when it is filled with submission of the form, the list of values.
  
  Please tell me how can I complete the list of values when loading screen.
  
  Thank you!

  Hello

  It depends on how you have defined the default value for ANOTHER_FIELD.

  I always set my default settings using a calculation, that runs before header, on the element that defines the value using a static assignment, but to ensure that the calculation is dependent on the order of the day being NULL - try this

  Andy

• Wipe data security blackBerry Smartphones - how to restore the mail application?

  Feature: BB Torch 9800.

  Provider: t-mobile.

  I had problems with my gmail set up.  I could not send / receive.  Message "blocked service."

  I did a Wipe of security under option.  Now, my Mail app icon is gone.

  If I go into setup - mail accounts, I see the Internet mail option.  It asks me to enter the account of the company, I do not agree.

  1. how to restore the Mail app?

  2. is it possible to do a hard reset of the device to factory default as a new phone?

  3. wonder if I can use this BB torch for email via Wifi only (not the cell provider data service) as an iPod Touch?

  Thanks for your help!

  Hello and welcome to the community!

  email_dc wrote:

  1. how to restore the Mail app?

  With a strong carrier network (for example, not only WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2, each should result in a message from your BB... Please wait just before moving on to the next step):

  1) register HRT

  • KB00510 How to register a BlackBerry smartphone with wireless network
  • Please wait a 'registration' message reach your Messages application

  2) Remove and return Service books

  • KB05000 Remove the maintenance book for the BlackBerry Internet Service email account in the BlackBerry smartphone
  • If you do not have access CMIME, continue deleting
  • KB02830 Send the directories for the BlackBerry Internet Service
  • Please wait "the Activation' Messages, one per already configured e-mail account, arrive in your Messages. If you have not already configured email accounts, please wait 1 hour.

  3) restart

  • With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot-~ 5 minutes...
  • See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  I hope that will move things again for you! If this isn't the case, then you should contact your mobile provider for formal support.

  email_dc wrote:

  1.

  2. is it possible to do a hard reset of the device to factory default as a new phone?

  There are several methods (which, BTW, no I believe to be useful to your situation):

  • KB16307 Actions performed by the BlackBerry smartphone during the removal of the user stored and application data
  • KB14058 How to delete all data and applications in the smartphone BlackBerry using the security option wipe
  • KB31291 How to reset a BlackBerry smartphone to factory using BlackBerry Desktop Software Settings
  • KB29847 How to charge a BlackBerry smartphone without using the BlackBerry Desktop Software

  email_dc wrote:

  1.

  2.

  3. wonder if I can use this BB torch for email via Wifi only (not the cell provider data service) as an iPod Touch?

  N ° of BB devices lack a complete email client on them. Instead, they depend on the BIS service to provide messaging functionality. BIS is active when you have also listed Internet/personal email where you currently see only Enterprise. All services of BIS, are sent to the device via data carrier network... contact them are therefore the right approach to discover why their network is no longer to deliver to you the services that you pay for.

  Good luck and let us know!

• BlackBerry smartphone how to install the new language? == > french

  By mistake I delete all my blackBerry Bold 9900 formulations.

  Rest than English.

  I would add yet another language ==> french example...

  In desktop software, I don't have in Applications: "Language and support of entry" to choose...

  Hello and welcome to the community!

  The easiest way is, on a PC (you can not do on MAC):

  (1) make sure that you have a current backup and your BB complete... you can find the instructions at the link in my auto-sig below.

  2) uninstall all the BB OS packages from your PC,

  (3) make sure you have the BB Desktop Software already installed

  • http://us.BlackBerry.com/software/desktop.html

  (4) download and install on your computer, the BB OS package you want:

  • http://us.BlackBerry.com/support/downloads/download_sites.jsp
  • If all you want are the levels of BONE, it is first sorted by carrier - the carrier supports, your search will be fast. However, some carriers are much slower than others to release updates. To really get the package up-to-date OS for your BB, you need to dig through and find all businesses that support your specific model BB and then compare the BONE levels they support.
  • Use this KB to help you choose the good alternative OS to include the language you want:
  • • Article ID: KB05305 Location of support for BlackBerry smartphones

  5) remove all copies of the SELLER on your PC. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

  • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
  • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

  6 (a) to change your level of BB OS installed (at level or lower), you can run the Desktop software and connect your BB... the software should offer the operating system package you have installed on your PC.

  6 (b) or, for recharging your BB OS level installed as well to change, work around the Desktop software and use the CHARGER. EXE directly, through step 2 in this process:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-device-software/how-to-reload-your-operating-syste...
  • Note Although written to "recharge" and the storm, it can be used to upgrade, downgrade or recharge any BB device model - depends on the operating system package you download and install on your PC.

  If, during the process of 6a or 6 b, your BB has an error '507', simply unplug the USB of the BB cord and reinsert it. do nothing else... This should allow the installation to continue. During the process, when it presents you with the screen of the things Application Loader to install on your device, make sure to develop options and select all items that relate to your desired language.

  Once the operating system is loaded, you can proceed with the activation of the language you want and restoring your backup (on the device).

  If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

  • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

  Good luck and let us know!

• BlackBerry Smartphones how out of the loop of ID

  My old BB Bold died on me - and I mean dead. No discount to zero and even the Desk top manager doesn't recognize it. I bought a Torch 9800 has changed the SIM card and it worked fine, until it came to the e-mail set up. I could remember my user name but not the password. I duly clicked 'forgot password' and back came the answer password sent to your B'berry. Probably at my "BOLD" dead. Because I can not access my mail to set the address on the new torch, because I need the password, I'm stuck here. I went to the site of B'berry ID, punch in the username and they too want to sent me a password to my address B'berry. I tried my service provider to get the password. Once more sent to my address mobileemail. They do not provide access to my address mobileemail, web-based as well as possibility of password recovery was released. I tried to go back and recreate a new user ID. No problem until I come to the e-mail address, how I threw because the address is already in use - no surprise, except that I can't use it.

  Is there someone who can suggest a way out of this? Short of renouncing the B'berrys and the purchase of an another smart phone providers.

  PVW

  Thank you very much for your promt reply. I tried your advice/suggestions, but without success. I can only conclude that your point about the dangers of use BIS for the was/is the real pitfall BBID enamel only. My provider has been particularly useless and made disparaging remarks about the problems caused by the so-called B'berry accounts 'package '. The megastore where I bought my BB Bold faithful a few years before, is more about B'berrys and were unable, rather reluctant to help. Europe becomes a wilderness of B'berry. So, I think after 10 years of happiness of Blackberry and three days of effort wasted his defeat in face of time and switch to another system.

  Thanks again for your help. You can't win them all; as the proverb says.

  PVW

• BlackBerry smartphone how to add the security certificate

  Hey can someone please tell me how to install a certificate of security on my BB, a particular WIFI connection. I loaded the certificate on the memory card, but it fails to open/install.

  HI and welcome to the Forums!

  This is a Ko that may be useful:

  KB13355 How to load a certificate of security of network on a BlackBerry smartphone

• BlackBerry smartphone how to restore the default version device software?

  Hi, I just update my software for device to BlackBerry Handheld Software v4.6.0.477 (EastAsia) BBB that OPTUS. But its totally different with the default version. I can't use Internet via Blackberry web browser using hotspot. It think there should be a lot of wifi and the application of 'download' and 'Instant Messaging' folder are lost! with the default version, when the first time I turn on the handset, there's MSN Messenger, Facebook, Myspace... etc in the folder "Download". Also I can't put more, my "Enterprise activation" required e-mail account, but I just that at the first time I've set up the handset, can I set up mail account everything I love. I'm not a business user. Anyone know how to restore the default device software version? If I can't restore back, anyone knows what version of the device software is better?  or how to fix this?

  BTW: I got my BBB a year ago. This is the first time I try to update the device software.

  Thank you very much!!

  BIS = BlackBerry Internet Service. Here is the OPTUS BIS site

  https://bis.AP.BlackBerry.com/HTML?brand=Optus

  See if you are able to connect to it and try what I suggested. What version of the software do you have on the camera before? You could try downgrading to this version. Different carriers have different versions of the OS, so I can't say what that yours was before the update.

• BlackBerry smartphone how to change the email account on blackberry 8900

  Hi all

  I installed my yahoo e-mail address on my BB 8900, some days before, I changed the password of my yahoo email address of the PC, now I can not receive or send e-mails form BB, I tried to update the new password in the BB, but I have no idea on how to change the e-mail account on BB 8900 , I will be very appreciated if it someone help me solve my problems.

  Concerning

  alobaydee

  Connect to your BIS account:

  Here, find and edit your yahoo account. Either change the password, or simply delete the account and re - add new.

  Go to the Personal Email Set Up icon and sign.

  Your desktop PC: http://www.blackberry.com/btsc/KB02830
  North American carriers - scroll down to select your carrier
  Carriers worldwide - find your operator from the list

• BlackBerry smartphone how to set up POP Mail

  I have a new Bold 9700. I'm new to the blackberry and for the life of me I don't see how to set up POP mail or internet access through my 3 G connection. all my other phones, I had in the past, when I incerted my social insurance card, I would get 3 SMS and all I had to do was save them and my internet was put in place. but my Blackberry has never these messeges. is it possible to set up my access to 3 G Internet and my POP mail? all I can find is an option to set up an Enterprise Server, and I don't have another option that all the books say I should have? any help anyone can offer woud be great. Thank you in advance.

  AA7KN wrote:

  Thanks for the info. you're right, I probably have a Blackberry account through my provider of the support cell. I didn't know this until I bought this phone. I love on the phone, except that I wish RiM would have included courier pop and internet through the cellular provider without the need to have a special account. It's expensive and with the extra cost, I don't want to activate the account. Thanks again for the info.

  AA7KN

  Hello

  It is unfortunate that you did not know this before purchase... a pity indeed. But, be aware that BB provides some unique items that are for the customer BB companies don't. For example, carriers must install and maintain a unique infrastructure that is only for their BB customers. As a result, they may charge extra for these services. It is regrettable that they have not revealed these facts you advance... oh, it's the companies that control the price... no RIM.

  Good luck!

• How to set the auto complete in Windows Mail

  How can I define the "full" automatic function in Windows Mail to use the Windows Messenger Contact list?

  WinMail remembers only 29 addresses.
   
  How to delete registration completion email in Windows Mail
  http://www.Winhelponline.com/articles/245/1/how-to-clear-the-email-auto-complete-entries-in-Windows-mail.html
   
  How to remove an address from the list of AutoComplete in Windows Mail
  http://email.about.com/od/windowsmailtips/Qt/et_del_autocomp.htm 

• BlackBerry smartphone how to install the Asian language pack

  does anyone know how to install the Asian language pack?

  whenever I go to my service provider to download software

  RIM asking all possible information, including what company I work for.

  I just want to download a software that supports the languages of Asia and people told me to do it from the blackberry site, but I can't do it because of this reason.

  Hi nellamtnz1207,

  I think don'nt there is a problem in there, it's a required field before RIM privicy policy

  Download all software RIM, you have to fill.

  Good luck

  Prince

  Click 'Like' If you want to thank someone.
  If problem resolves mark message (s) as a 'Solution', so that others can use.