BlackBerry Smartphones AutoPlay appears whenever Blackberry is connected

Similar Questions

• Curve Smartphones blackBerry 8520 connected to network bb

  I have a blackberry 8520 connected wireless to my ISP BT

  It will connect to the internet and allows you to surf the internet, but won't let me sign in yahoo mail. When I try the login box appears for a few seconds, then disappears behind an ad that comes immediately after it and the lock on the top of the page changes straight to an orange padlock.  I disconnected the e-mail on the pc and logged in again to see what is happening there. The exact same announcement came, but the login box was above it, allowing me to connect.

  The phone is connected to the network and works well.  I was able to connect with no problem.  The only thing I can find is now on the phone itself. Check connections, my homehub watch is on, but also shows a white dash, which means that it is not connected to the network.  I can't find anything in the help files on how to reconnect to the network.

  Can someone point my in the right direction.

  Thanks for reading and in advance for any help offered.

  Interesting. But if it is said that, just try clicking on Yes. And just, the PSK is the pre-shared key, or the wifi password.

  If it still does not respond, the solution may be to back up your phone using the BlackBerry Desktop Software and do a security wipe. To do this, go to Options > Security Options > Security wipe. Do a wipe of the application data. Once it is finished, perform a selective restore by using the BlackBerry Desktop Software and restore only the databases you need (e.g. messages, address book, calendar, etc.).

  Then you should be able to start from scratch.

• BlackBerry network connectivity

  Hello

  I have problems intermittent attempt to download data in JSON format using http. I understand, much has been written about this issue, but anyone who has used below class to connect to HTTP?

  http://www.sameernafdey.com/2009/08/HTTPConnection-over-bis-WAP-10-11-WAP.html

  I tried above class for formatting my URL and it seems to help a little, because connections are not to be allowed to fall as well.

  Here are the class-

  /**
  * NetworkUtils.java
  *
  * Note: This class is not originally written by myself. It is rather a
  * updated the version of the open source of the alias of the application
  * NetworkDiagnosticTool provided by RIM. Feel free to edit and use this
  source code, but at your own risk. As I'm not the original author of this code,
  * I'm not responsible for any problems if you use this source code.
  *
  * References:
  * 1. NetworkDiagnostic tool: http://www.blackberry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800451/800563/What_Is...
  * 2. BlackBerry Technical Knowledge Base: http://www.blackberry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/customview.html?func=...
  * 3. BlackBerry Support Forum Post: http://supportforums.blackberry.com/rim/board/message?board.id=java_dev&message.id=29111
  */

  import java.io.EOFException;
  Import net.rim.device.api.servicebook.ServiceBook;
  Import net.rim.device.api.servicebook.ServiceRecord;
  Import net.rim.device.api.synchronization.ConverterUtilities;
  Import net.rim.device.api.system.CoverageInfo;
  Import net.rim.device.api.system.WLANInfo;
  Import net.rim.device.api.util.DataBuffer;

  /**
  * NetworkUtils for Blackberry. This class provides utility functions for formatting
  * URL HTTP and Socket connections in the platform Blackberry RIM who take advantage
  * the ability of the device to connect to the internet using the SDM, BIS, WAP 1.0, 1.1
  * WAP 2.0, unite, WiFi.
  *
  For more information about the options of connectivity etc. Please take a look at the
  * great post in the Blackberry Support Forum here
  Your BlackBerry - http connections and a connection in the world.
  *
  * @author Sameer najar
  * @since August 21, 2009.
  * [email protected]
  */
  public final class NetworkUtils {}

  / * Stores carry ServiceBooks if found. Otherwise, null * /.
  private ServiceRecord srMDS, srBIS, srWAP, srWAP2, srWiFi, srUnite;
  / * Indicators showing the status of each transport coverage * /.
  Private boolean coverageTCP = false, coverageMDS = false, coverageBIS = false, coverageWAP = false, coverageWAP2 = false, coverageWiFi = false, coverageUnite = false;
  /**
  * Applies to WAP1.0 connection only.
  * It is a flag to indicate if the WAP settings should be parsed from the full book.
  * If the user provides any WAP on the InputScreen parameter, this flag is set to false.
  * TODO currently, analysis of service book is not supported.
  */
  Private boolean wapParametersUnavailable = true;
  /**
  * The constant CONFIG_TYPE_ which are used to find appropriate service books.
  * TODO now that single unit is detected in this way.
  */
  private static final int CONFIG_TYPE_WAP = 0;
  private static final int CONFIG_TYPE_BES = 1;
  private static final int CONFIG_TYPE_WIFI = 3;
  private static final int CONFIG_TYPE_BIS = 4;
  private static final int CONFIG_TYPE_WAP2 = 7;
  private static final String UNITE_NAME = "unit";

  public String formatURL (String httpBaseURL) {}
  initializeTransportAvailability();

  /**
  * The rest of this method simply tries to communicate on different transport
  * that are available. For each transport it retries 'attempts' several times if
  * an attempt fails.
  */

  / * WiFi using HTTP * /.
  If (srWiFi! = null & coverageWiFi) {}
  System.out.println ("WiFi (HTTP)" ");
  Return getWiFiURL (httpBaseURL);
  } else {}
  If (srWiFi == null) {}
  System.out.println ("No WiFi service found.");
  }
  If (! coverageWiFi) {}
  System.out.println ("WiFi coverage is not available");
  }
  }

  / * Direct TCP using HTTP * /.
  If {(coverageTCP)
  System.out.println ("Direct TCP (HTTP)" ");
  Return getTCPURL (httpBaseURL);
  }

  / * MDS using HTTP * /.
  If (srMDS! = null & coverageMDS) {}
  System.out.println ("MDS (HTTP)" ");
  Return getMDSURL (httpBaseURL);
  } else {}
  If (srMDS == null) {}
  System.out.println ("No. MDS service records found.");
  }
  If (! coverageMDS) {}
  System.out.println ("coverage of SDM is not available");
  }
  }

  / * Unite using HTTP * /.
  If (srUnite! = null & coverageUnite) {}
  System.out.println ("unit (HTTP)" ");
  Return getUniteURL (httpBaseURL);
  } else {}
  If (srUnite == null) {}
  System.out.println ("No. Unit service records found.");
  }
  If (! coverageUnite) {}
  System.out.println ("unit cover is not available");
  }
  }

  / * BIS-B using HTTP * /.
  If (srBIS! = null & coverageBIS) {}
  System.out.println ("BIS-B (HTTP)" ");
  Return getBISURL (httpBaseURL);
  } else {}
  If (srBIS == null) {}
  System.out.println ("No BIS - B service records found.");
  }
  If (! coverageBIS) {}
  System.out.println ("BIS-B coverage is not available");
  }
  }

  / * WAP1.0 usign HTTP * /.
  getWAPURL (httpBaseURL);
  If (srWAP! = null &! wapParametersUnavailable & coverageWAP) {}
  System.out.println ("WAP (HTTP)" ");
  Return getWAPURL (httpBaseURL);
  } else {}
  If (srWAP == null) {}
  System.out.println ("No WAP service records found.");
  }
  If (! coverageWAP) {}
  System.out.println ("WAP coverage is not available");
  }
  If {(wapParametersUnavailable)
  System.out.println ("enter the WAP settings");
  }
  }

  / * WAP2.0 using HTTP * /.
  If (srWAP2! = null & coverageWAP2) {}
  System.out.println ("WAP2 (HTTP)" ");
  Return getWAP2URL (httpBaseURL);
  } else {}
  If (srWAP2 == null) {}
  System.out.println ("No WAP2 service records found.");
  }
  If (! coverageWAP2) {}
  System.out.println ("WAP2 coverage is not available");
  }
  }

  Return httpBaseURL;
  }

  /**
  * Initializes the ServiceRecord instances for each transport (if available). Otherwise makes null.
  * Also determines if sufficient coverage is available for each transport and sets coverage indicators.
  */
  private void initializeTransportAvailability() {}
  Full book sb = ServiceBook.getSB ();
  Reviews [] ServiceRecord = sb.getRecords ();

  for (int i = 0; i)< records.length;="">
  {
  MyRecord = documents [i] ServiceRecord;
  String cid, uid;

  If (myRecord.isValid () &! myRecord.isDisabled ()) {}
  CID = myRecord.getCid () .toLowerCase ();
  UID = myRecord.getUid () .toLowerCase ();
  BIS
  If (cid.indexOf ("ippp")! = - 1 & uid.indexOf ("gpmds")! = - 1) {}
  srBIS = myRecord;
  }

  BES
  If (cid.indexOf ("ippp")! = - 1 & uid.indexOf ("gpmds") ==-1) {}
  srMDS = myRecord;
  }
  WiFi
  If (cid.indexOf ("wptcp")! = - 1 & uid.indexOf ("wifi")! = - 1) {}
  srWiFi = myRecord;
  }
  Wap1.0
  {If (getConfigType (myRecord) == CONFIG_TYPE_WAP & {cid.equalsIgnoreCase ("wap"))}
  srWAP = myRecord;
  }
  Wap2.0
  If (cid.indexOf ("wptcp")! = - 1 & uid.indexOf ("wifi") ==-1 & uid.indexOf ("mms") ==-1) {}
  srWAP2 = myRecord;
  }
  Unite
  {If (getConfigType (myRecord) == CONFIG_TYPE_BES & {myRecord.getName () .equals (UNITE_NAME))}
  srUnite = myRecord;
  }
  }
  }
  If (CoverageInfo.isCoverageSufficient (CoverageInfo.COVERAGE_BIS_B)) {}
  coverageBIS = true;
  System.out.println ("State of coverage: BIS-B - online").
  }
  If (CoverageInfo.isCoverageSufficient (CoverageInfo.COVERAGE_DIRECT)) {}
  coverageTCP = true;
  System.out.println ("State of coverage: COVERAGE_DIRECT - online").
  coverageWAP = true;
  System.out.println ("State of coverage: WAP 1.0, 1.1 - online").
  coverageWAP2 = true;
  System.out.println ("State of coverage: WAP 2.0 - online").
  }
  If (CoverageInfo.isCoverageSufficient (CoverageInfo.COVERAGE_MDS)) {}
  coverageMDS = true;
  System.out.println ("State of coverage: MDS - online").
  coverageUnite = true;
  System.out.println ("State of coverage: unit - online").
  }

  If (WLANInfo.getWLANState () == WLANInfo.WLAN_STATE_CONNECTED) {}
  coverageWiFi = true;
  System.out.println ("State of coverage: Wifi - online").
  }
  }

  /**
  * Gets the type of a ServiceRecord config with getDataInt below
  @param record A ServiceRecord
  * @return the ServiceRecord configType
  */
  private int getConfigType (file ServiceRecord) {}
  return getDataInt (balance, 12);
  }

  /**
  * Gets the type of a ServiceRecord config. From 12 as a type returns the configType.
  @param record A ServiceRecord
  @param type dataType
  * @return configType
  */
  private int getDataInt (ServiceRecord Records, int type) {}
  DataBuffer buffer = null;
  buffer = getDataBuffer (type of record),

  If (buffer! = null) {}
  try {}
  Return ConverterUtilities.readInt (buffer);
  } catch (EOFException e) {}
  Returns - 1;
  }
  }
  Returns - 1;
  }

  /**
  * Utility method to getDataInt()
  */
  private DataBuffer getDataBuffer (ServiceRecord Records, int type) {}
  data Byte [] = record.getApplicationData ();
  If (data! = null) {}
  DataBuffer buffer = new DataBuffer (data, 0, data.length, true);
  try {}
  buffer.readByte ();
  } catch (EOFException e1) {}
  Returns a null value.
  }
  If {(ConverterUtilities.findType (buffer, type))
  return the buffer;
  }
  }
  Returns a null value.
  }

  /**
  Construction of a direct url TCP of the baseURL supplied by the user
  * @return A url with direct TCP settings
  */
  private String getTCPURL (String baseURL) {}
  String url = baseURL + "; deviceside = true;
  String AFN = ""; inputs.getEfTcpAPN ();
  String username = ""; inputs.getEfTcpAPNUser ();
  String password = ""; inputs.getEfTcpAPNPassword ();
  If (apn.length () > 0) {}
  URL += '; APN ="+ AFN;
  }
  If (username.length () > 0) {}
  URL += '; TunnelAuthUsername ="+ username;
  }
  If (password.length () > 0) {}
  URL += '; TunnelAuthPassword ="+ password;
  }
  Back to url;
  }

  /**
  Construction of a url MDS of the baseURL supplied by the user
  * @return A url with parameters MDS
  */
  private String getMDSURL (String baseURL) {}
  return baseURL + '; deviceside = false;
  }

  /**
  Construction of a url of the unity of the baseURL supplied by the user
  * @return A url with the parameters of the unit
  */
  private String getUniteURL (String baseURL) {}
  return baseURL + '; deviceside = false' + ";". " ConnectionUID ="+ srUnite.getUid ();
  }

  /**
  Construction of a url BIS-B of the baseURL supplied by the user
  * @return A url with parameters BIS-B
  */
  private String getBISURL (String baseURL) {}
  return baseURL + '; deviceside = false; Not implemented since it is only available for RIM ISV partners
  }

  /**
  Construction of a url the baseURL user-provided WAP2.0
  * @return A url with parameters WAP2.0
  */
  private String getWAP2URL (String baseURL) {}
  return baseURL + '; deviceside = true' + ";". " ConnectionUID ="+ srWAP2.getUid ();
  }

  /**
  Construction of a url the baseURL user-provided WiFi
  * @return A url with WiFi settings
  */
  private String getWiFiURL (String baseURL) {}
  return baseURL + '; interface = wifi. "
  }

  /**
  Construction of a WAP1.0 url from the baseURL supplied by the user
  * @return A url with parameters WAP1.0
  */
  private String getWAPURL (String baseURL) {}
  String url = baseURL + "; deviceside = true;
  String gatewayIP = ""; inputs.getEfWapGatewayIP ();
  String gatewayAPN = ""; inputs.getEfWapGatewayAPN ();
  String gatewayPort = ""; inputs.getEfWapGatewayPort ();
  String sourceIP = ""; inputs.getEfWapSourceIP ();
  SourcePort string = ""; inputs.getEfWapSourcePort ();
  String username = ""; inputs.getEfWapUser ();
  String password = ""; inputs.getEfWapPassword ();
  If (gatewayIP.length () > 0) {}
  URL = url + ";". " WapGatewayIP =' + gatewayIP;
  wapParametersUnavailable = false;
  }
  If (gatewayAPN.length () > 0) {}
  URL = url + ";". " WapGatewayAPN ="+ gatewayAPN;
  wapParametersUnavailable = false;
  }
  If (gatewayPort.length () > 0) {}
  URL = url + ";". " WapGatewayPort ="+ gatewayPort;
  wapParametersUnavailable = false;
  }
  If (sourceIP.length () > 0) {}
  URL = url + ";". " WapSourceIP =' + sourceIP;
  wapParametersUnavailable = false;
  }
  If (sourcePort.length () > 0) {}
  URL = url + ";". " WapSourcePort =' + sourcePort;
  wapParametersUnavailable = false;
  }
  If (username.length () > 0) {}
  URL = url + ";". " TunnelAuthUsername ="+ username;
  wapParametersUnavailable = false;
  }
  If (password.length () > 0) {}
  URL = url + ";". " TunnelAuthPassword ="+ password;
  wapParametersUnavailable = false;
  }
  /*
  If (inputs.getCfWapEnableWTLS ()) {}
  URL = url + ";". " WapEnableWTLS = true;
  wapParametersUnavailable = false;
  }*/
  If (wapParametersUnavailable & srWAP! = null) {}
  Back to url;
  } / * Not implemented * /.
  else {}
  Back to url;
  }
  }
  }

  the code creates 'only' the correct one to use connection suffix, it does not take care to use them or close the connection.
  Maybe your code does not correctly clean on the rise?

• AutoPlay does not illuminate when connect you camera

  original title: AutoPlay

  Hello! I have a problem with a camera Fuji Finepix J12 and is that when I connect the camera to the PC via the USB of the PC bleeps port as if he found something being plugged, but no AutoPlay appears and there is no sign of the drive in my computer. If I Plug one of my readers, flash etc. they show all with Autoplay and show in my computer. So annoying because it seems like this device which is the problem, but it worked OK in the past. In the AutoPlay list Finepix J12 watch. Help, please

  After turning on the camera and pressing the button for approx. 1 second reading, that the PC should recognize the camera automatically, Fuji FinePixViewer should start automatically if it is installed and load photos window is displayed, otherwise you can try to uninstall and reinstall the software, please refer to your manual.

  When there are a lot of images stored in the memory card, it takes time to display on the screen of your PC. In addition, it may take some time to import images or you may be unable to save pictures. In this case, use a picture memory card reader.

  I hope I could help

• How can I disable the 'Open with' window that appears whenever I start?

  My desktop pc using Windows 7 Home Premium. For years, I want to start with nothing default opening. Each time, the choice of what to open were made manually by me.

  For some reason that I don't understand, one day after start-up, this 'Open with' window appears. Under "Choose the program you want to use to open this file," the indicated file was my name. (I replaced the one here with the word "Me.")

  

  I never asked this window will open after startup. It appeared for the first time without having done me anything. I do not think that I have all the files with my first name only, so I closed the window and ignored.

  But the window open whenever I start. Don't need or want to be, I keep closing and ignore him.

  Soon, not one, but two of the pop-up appeared. Then THREE.

  For several years, the three windows double as above appeared whenever I start.

  Don't know how or why it began. Don't know which program is causing it. Don't know how to stop it.

  Anyone recognize this window? Do you know which program is causing it to appear after startup? Do you know how to disable? Is there a trick to disable three of them?

  (1) is the window 'Open with' above now a default pop-up window after startup that cannot be disabled without the registry editor?

  No, the "open with" isn't a local default value.  You see it because something - probably malware - tried to configure your computer to start a process at startup time.  Windows, however, does not recognize the name of the process (i.e. the file name) as an executable program so it asks you to specify which program to use to open the file.

  No, you don't need to manually edit the registry to resolve this problem.

  (2) there is no program in Control Panel I can open that has a simple toggle to turn it on or off?

  No, there is no program in Control Panel you can use to solve this problem.

  Here's how fix you the problem.

  A. the easy way (doesn't unless you are very lucky)

  • Click the start ORB, all programs and then scroll down until you find "Startup" and click on it.
  • If you see that anything that gets filed that you do not want to start when you log on to "Start", right click and delete.
  • If you do not know what the items listed and are reluctant to delete something you don't understand not (a very good policy to follow), list all the elements in your next reply and someone here will try to advise you.

  B. the way a little harder (that almost always works)

  • Download here Autoruns.zip (this course is that you download from a Microsoft web site)--> http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx
  • Right-click on the downloaded file and select "extract all".
  • Go to the folder where the extracted files are located (this should have been opened for you by default), and then double-click on autoruns.exe
  • Wait until the program has finished scanning (look at the bottom left corner) and then select the 'connection '.
  • Look in the column titled 'Image path' for a line that includes whatever it is that appeared as the 'file' in the original pop-up window.
  • If you find a line with the same name in there, uncheck the box at the left end of the line, close Autoruns and restart your computer.
    • If the ToolTip no longer displayed, you can (a) do nothing do or Autoruns (b) re - run, find the line you're not controlled and right click > delete it.
  • If you cannot find a line with the name you're looking for...
    • Click on the "all" tab
    • Click file, and then click search, then enter the name and click "next".
      1. If a line is found, right click and select 'copy '.
      2. Paste the line in your next reply here
      3. Press F3 to find the next instance and repeat steps 1 and 2 until no more bodies are found (if there are several rows, you can open a Notepad window and paste the lines temporarily here)
      4. If you are reluctant to publish anything with your name in it, change the lines to replace your name

• Whenever I have connect my system, the error message 'C:\Users\Dell\AppData\Roaming\mapnc.dll' does not exist.

  Whenever I have connect my system, the error message appears which displays

  "There was a problem starting, the specified module could not be found."

  and sometimes,.

  "C:\Users\Dell\AppData\Roaming\mapnc.dll" is not exist.

  How can I solve this problem? Please help me. The information system is given below,

  Name of the operating system Microsoft Windows 7 Ultimate
  Version 6.1.7601 Service Pack 1 Build 7601
  Manufacturer of operating system Microsoft Corporation
  System model Inspiron N5010
  System Type X 86-based PC
  Processor Intel (r) Core i5 CPU M 460 @ 2.53 GHz, 2528 Mhz, 2 Lossnay, 4 logical processors
  A09 BIOS Version/Date Dell Inc., 19/10/2010
  SMBIOS Version 2.6
  Physical memory (RAM) installed 4.00 GB
  1.86 GB available physical memory
  5.85 GB total virtual memory
  4.47 GB available virtual memory
  2.93 GB page file space
  Paging file C:\pagefile.sys

  Avira Antivirus Premium is also installed on the system. The error message from the last weak. However, the system had no no ill effect after that.

  Hello

  Thank you for writing to Microsoft Communities.

  1. have there been recent changes to the computer before the show?

  Please go ahead and follow the steps mentioned from the link and later a update on the State of the question.

  Method 1: Try to start the system in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Method 2: If the issue does not exist in Mode safe mode then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 3 in the link provided to return the computer to a Normal startup mode.

  Please follow these recommended steps and post if you still experience the problem.

• How to create (or delete) a new tag for a Web site, so that his tag appears (or does not appear) whenever I restart Firefox?

  How to create (or delete) a new tag for a Web site, so that his tag appears (or does not appear) whenever I restart Firefox?

  See this - https://support.mozilla.org/en-US/kb/How%20to%20set%20the%20home%20page

• The Firefox HELP tab keeps appearing whenever I open the application or a new window. Firefox 3.6.28, Mac OS 10.4.11

  The Firefox HELP tab keeps appearing whenever I open the application or a new window. Firefox 3.6.28, Mac OS 10.4.11

  Ah, apparently it's reading I wanted as long as home pages; When I reset my homepage it started working right.

  Thank you

• Bright magnet "|" appearing whenever I click.

  When someone types in message boxes, address bars, etc. a flashing "|" is displayed to indicate that you can type here. This blinking "|" appears whenever I click on a page now. If I just click on the text or an image, the | appears on this subject (or next to it in the case of images). This only happens in Firefox and seems to occur only on things that can be highlighted. How can I disable this?

  You're in caret navigation mode, if you press F7 it activates / deactivates the slider switch navigation mode.

• How can I stay connected to my internet? Whenever I have connection I reconnect to my internet

  Original title: internet access
  How can I stay connected to my internet?  Whenever I have connection I reconnect to my internet

  Hi oulimatou,

  Here's a beautiful walk through for troubleshooting network connection problems:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows?SignedIn=1

  b Eddie

• I keep getting "parameters of research 1.2.1 appearing whenever I try to open a document.

  I keep getting "parameters of research 1.2.1 appearing whenever I try to open a document.
  Could you get it someone please let me know how to get rid of. I tried to go to Control Panel Add/Remove Programs, but it cannot be deleted.

  Kind regards

  Richard

  Hello Richard,.

  Welcome to the Microsoft Answers Community!

  Looks like you have malicious software installed on your machine. Here's a post by Vincenzo Di Russo who will lead you step by step in a process to clean your computer of malware.

  How to get rid of malware

  After having been cleaned to your system, you should have an antivirus installed on your machine. Microsoft provides a free solution with Microsoft Security Essentials.

  Hope that helps.

  Steven
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• MS Photo Gallery, how can I activate the "do not show this again" when the dialog box appears whenever I try to download a picture to another location?

  How can I activate the "do not show this again" when the dialog box appears whenever I try to download a picture to another location?

  The dialog box that appears frequently when I try to convert or download photos, shows the shadow of this question - I want to make it active until the times dialog box stops appearing I scroll the photo folders.

  Thank you

  I got the last part of what you wanted, which was simply not the message

  The key is that you have to allow this program through your windows firewall.

  Go to your look for the windows Firewall Control Panel,

  There should be a list to allow a program through windows firewall, look at the top left.

  If you feel safe doing this, vlc is not one that I would feel safe with, but to you, it has a function to browse to find the program to be added to your trusted list or access through your firewall.

  Still, it may give you a warning but could release the message?

• I would like to know how to remove the box/cursor information dialog box that appears whenever I have stop my mouse on an object.

  I would like to know how to remove the box/cursor information dialog box that appears whenever I have stop my mouse on an object.

  Have you tried to uncheck both options via Control Panel / folder Options / View?

  "Displays the size of file in folder tips".

  "Display descriptions pop - up for folder and desktop items"

• How to stop the pictures I deleted to no longer appear whenever I am downloading pictures?

  How to stop the pictures I deleted to no longer appear whenever I am downloading pictures?

  You need to remove out of the removable disk when finished
  Download them - windows doesn't automatically.
   
  --
  Noel Paton
  CrashFixPC
   
  Nil Carborundum Illegitemi
  www.crashfixpc.co.UK
   
   

• C:\Windows\SysWow64\CScript.exe appears whenever my computer starts. Is there a way to prevent that from happening?

  C:\Windows\SysWow64\CScript.exe appears whenever my computer starts. Is there a way to prevent that from happening?

  M. Shivkumar, I also encountered this problem, and after following the instructions given by Linney, I've isolated the problem to the boot service "CheckNDISPort", which was linked to the MTS MBlaze program on my computer. It is not a virus, nothing to worry about. You can stop this from happening by disabling the boot service called 'CheckNDISPort' in the tab, start the System Configuration utility. It is not to damage your computer if you keep it checked.