BlackBerry Smartphones Blackberry 8520 does not charge when the battery is empty

Similar Questions

• Dell Precision M6500: Reference DELL M6 500 computer laptop does not charge when the work and no start-up when which

  Laptop DELL M6 500, do not load when the work and no start-up when which

  just bettry lights blink when phone on Exchange when I plug laptop tap, on bettry

• Satellite A30 161 does not work when the battery is installed

  Hello

  I have a problem with my Satellite A30-161. The laptop works perfectly without the battery installed. With the battery installed and the AC adapter plugged the power supply and battery (light orange) are turned on.

  When turn on/off, as soon as WXP loaded the battery light turns off and the laptop turns off. With battery only laptop does not start. There is no dirt on the heat sink and it doesn't seem to be a problem with the connector DC and power lights still on.

  Any ideas?

  Hello

  This behavior is not easy to give an accurate diagnosis, but according to your description, I assume that there is a problem of electronic power supply. Just using special diagnostic tool, it is possible to check if there is a problem serious.

  To be honest, I don't think you can do it alone. The only thing you can try is to test it with new battery. Maybe you should contact the service authorized in your country. talk with them and you will see what they say.

• Satellite L10-104 does not start after the battery totally empty

  Hello

  After leaving the laptop the weekend without the charger, the battery was totally empty. So I plugged back it it to charge the battery for a day.

  Now, when I press the power button the Green LED at the front lights up for about 3 seconds - nothing else is happening. No HARD disk does appear, no noise from fan coooling, nothing on the screen.

  Does anyone have ideas, what I could do to make it work again?

  Thank you

  Christian

  Hello

  Remove the battery and unplug the AC adapter from the laptop.
  Wait a little (1 hour) and then reconnect the two parts.
  Then try turning on the laptop computer. Maybe it helps

  If this will not help, then a hardware problem might be possible
  In this case the RAM modules must be verified in the first step.

  See you soon

• Satellite Pro L20: battery not charge when the power adapter is connected

  Hello

  all advice appreciated.

  I had a Satellite Pro L20 for about 18 months. Recently, battery does not charge when the power adapter is connected. The battery light starts yellow (which means more liberated, I think?), then will both green, the machine sat for awhile. However the ACPI often said that AC is "offline."

  There are two recent occurrences that coincide with this problem, I try to eliminate:

  1. my friends rat chewed by the feeder for pets! Power is Mobile OK insofar as he fled sector - the rat seems to have simply chewed by the outer cover (I see some threads, but I think that is just a shield, although I'm not an electrician).

  2. I put the laptop in hibernation for the first time. That seemed to mess up the system a bit, which was what initially drew my attention to the problem. This question is a bit complicated because I'm under Linux (Xubuntu).

  I updated the drivers etc from windows when I bought the laptop. Never had any problems until now and have been running linux for centuries. Also, I have mainly the laptop the power supply turned off, but do not remove the battery (is that really a problem these days?)

  I obviously need to replace the adapter, but is - it is likely (and how I can check) that the battery was borked until?

  see you soon
  Chris

  First, please check if the other are lit.
  If the AC led and power led are on the adapter sector is ok and it provides the power to the laptop.

  > The battery light starts yellow (which means more liberated, I think?), then will both green, the machine sat for awhile
  If the battery LED is yellow, this means that the battery is not fully charged and if the Green led changes then recharging is caught and the battery has been recharged.

  So I really don t see any problems with the charge process.

  Maybe the battery is old and so you cannot use it for an extended in such a case only the replacement of the battery could help.

• HP Pavilion G6 computer 1093SA laptop does not charge when I plug in the power adapter

  HP Pavilion G6 computer 1093SA laptop does not charge when I plug in the power adapter

  The battery is dead. When I try to turn on the laptop by plugging the AC adapter does not charge or led power LED does not turn on. But when I press the power button, the power, the indicator flashes and turns off (when power adapter connected).

  (1) I tried the press and holding the power button for 30 seconds after removing the battery & AC adapter / CC.

  (2) I tried to change the power adapter too.

  The problem is that it is.

  Your advice is very much appreciated.

  Thank you best regards &,.

  Zia

  Dear customer,

  Welcome and thanks for posting your question on the Forum of Support HP

  It seems that you are not able to turn on the laptop and tried to solve the problem

  Please perform steps listed to find out if it is a hardware or software problem below:

  1. remove all cables and devices, disconnect them and try to turn on the device

  2. check the LED light situation and ensure the action of the spring button / stop is normal

  3 Exchange with a well known power cord and the AC adapter

  4 Pack no adapters are available, check if the power adaptor is slightly warm

  Note: This will give us an indication that the power adapter could be good

  5. do you know if the laptop was in battery or power adapter when you used the last time

  Note: Make sure that there is no spill of liquid or cutting

  6. check if the Port of the AC adaptor is loose/broken

  Note: If the laptop is not on even with a power adapter well known, this confirms the hardware failure with the system board or power DC Circuit

  Hope this helps for other queries to answer the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP

• While the loop does not stop when the two values are equal using equal to comparitor

  Hello world

  I have a really, really strange bug. I have a LabVIEW VI that change a chain on a power supply. I have a start and a stop voltage and use a while loop to increment the device. For example if I want to scan from 1, 2V to 2.2 V in 0.2 V incremements, the program will end when "The current tension" = "stop the tension." And it works very well!

  However, when I start - 3 V and want to stop to say-0.8 (new in 0.2 V incremements) the program does not stop when "The current tension" = "stop the tension." I checked with the probe close to what should be the end of the race and - 0.8 V goes both of the entries ' equal to ' comaprison operator, but that his can't trigger a real result.

  It's very strange for me. Espeically as if I'm going - 0.8 V to-2 V but decrement of-0.2 V, the program stops correctly!

  I am very confused!

  See you soon!

  Search on: comparison of floating-point numbers

  The second thread is particularly relevant. This discussion was 2009, but you can find that the same "bug" being reported to enter the end of the 1980s.

  Mike...

• C50-A-19 t satellite does not start with the battery mounted

  OK, first post here.

  I see similar questions coming, but as they are never QUITE the same, I am that posing in a new thread.

  I left my Satellite from one day to the next (do not remember if I had put off, or he simply had 'gone to sleep', but it has been connected to the grid).

  When I got to reboot, I got a power light on, but screen blank (black). After reading a few similar complaints on the internet (via another laptop!), I tried to remove the battery and power from the grid.
  This worked well (I write him in this state right now).

  But whenever I put the battery and try again, it will fail in the same way.
  I tried this company "press and hold power for 30 seconds" without success (but I'm not 100% sure of the EXACT procedure actions sequence).

  I have a few questions:

  (1) I take the laptop away from my office - is there a problem with everything just works like this (i.e. of the grid, with no battery inserted) indefinitely?

  (2) in any case, I want to solve the problem.
  If the battery has run COMPLETELY flat, and that the laptop can not it lights but also operate normally?

  Alternatively, is probably that the battery has not experienced a catastrophic failure and simply needs to replace?
  If so, I'll just buy a. BUT...

  What I don't want to do, is to pay for a costly spare battery, to find that it was actually another factor at the origin of the problem, and I'm back to square one and out of Pocket!

  Any advice would be welcome.

  Thank you

  Mike

  Hello

  According to your assignment, in most cases, you use the laptop connected to the power adapter but no battery. Is this correct?

  First we need to know that if the AC adapter is plugged in, the laptop should work correctly with - and without inserting the battery.
  If you unplug the AC adapter, the laptop should automatically switch to battery power. In this case, it is important that the battery is pretty cool power to provide the power for the laptop.
  In case the battery is empty, the laptop will not light.

  I recommend to insert the battery plug the power adapter and charge the battery for a longer period of time.

  You should also check if the battery is recognized by the Windows system and the battery charge indicator (battery in the taskbar icon) shows the State of battery charge.

  In case the battery is fully charged and the laptop does not work using the battery power only, you should test the new battery.
  If new battery does not solve the problem, s for laptop hardware needs an audit.

• I want to make my laptop plugged in, but do not load when the battery reaches 95%. How can I do?

  H !!!

  I want some help to train you...

  There are growing problem in many portable of peoples that their laptop shows connected but does not support...

  But it's not my problem.

  My problem is just the opposite of it.

  I want to make my laptop plugged in but not in charge when the battery reaches 95% how can that I do?

  Hoping answers from you...........................................................................................................

  Original title: Performance and tools

  JNMilan,

  It is not possible. You must use a third-party software to do or contact the manufacturer.

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Back to us for any problem related to Windows in the future.

• Re: Satellite Pro L670 - can I turn off the sound when the battery is empty?

  Hello

  Is it possible to disable the bios beep when the battery is empty or the laptop's Hibernate?

  I have a Toshiba Satellite Pro L670.

  Even when the sound in Windows is turned off the laptop do a annoying sound.

  Thank you!

  Maybe it sounds silly, but I put t understand why that should be disabled. When the battery reaches the critical battery level you will be informed about this and portable must be connected to the power running or you have to save your work and turn it off.

  Do you really want to work until the battery is completely discharged?

  Anyway, AFAIK this notification level BIOS cannot be disabled.
  Let's see if someone else is better informed than me.

• BlackBerry Smartphones Blackberry curve does not charge PLEASE HELP

  Hi can some one give me the phone number for the blackberry customer service as my blackberry phone will not charge tried 3 Chargers on it and the battery won't charge I'm looking for a number of customers with this problem you can call can anyone help me hear

  Hello!! I guess, you must contact your blackberry device provider to verify the physical delivery on a device... Try to find for your particular provider by Googling & get the number of treatments c, then simply call

• Call the native browser blackberry OS6 does not work when you use this line Browser.getDefaultSession () .displayPage (url);

  Hello

  I need to invode a native browser showing a Web site using the code below

  Browser.getDefaultSession () .displayPage (url);

  She works in OS5, but does not work for the OS6. Please, someone knows how to solve this problem, too much to guide me

  regards + thank you

  codemobiles.com

  Oh, thanks for your response. (the browser is not called, there is nothing happen)

  Hoowever, the problem is resolved. That's my problem forget to add the "http://" in the url.

  regards + thank you

• HP ENVY Notebook PC m6: HP Envy does not charge while the laptop is turned on.

  Hello

  Well, I'm having some trouble loading with my HP ENVY. My laptop does not load as I'm with her. It will charge, but it does charge when the laptop is closed and sometimes if it has locked and disabled.  I don't know if it would be the battery or the power supply? Maybe something internally?

  Key points

  * Battery charge does that when the lid is closed (sleep mode). **

  * If I close the lid and plug in the charger, the light indicates orange and the battery will deliver to load almost exhaustive *.

  * If I open the lid before the orange light changing to white, battery icon always says: _ % available (plugged in, does not support). **

  * I tried to waste the battery. I removed the battery and the AC adapter is plugged in. I tried to turn on the laptop or don't put in place *.

  I don't have to replace anything yet. I was hoping to find out if anyone has had this happen to them before.

  Thank you

  Maggie

  Hi there @mdeely,
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you have a problem with the battery not charging. I'll be happy to help you.

  Please report the number of complete product from your computer. Check out the following, if you need assistance with this information.
  How can I find my model number or product number?

  When I enter the product number, I'll get the documents to your computer.

• ITunes does not recognize when the Ipod is connected. Help

  I have an ipod classic and only recently (Christmas 2015 day) itunes has ceased to recognize when my ipod is connected to my laptop. However, I know I tried three cables work because the ipod screen shows that it is connected and my laptop opens the file for my ipod, but this does not add to the music on it. How can I my itunes to work again?

  Thank you.

  

  It's what charge my laptop when I connect my ipod instead of loading of itunes.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Keyboard dock does not charge on the propeller

  I had the power drain from the dock, there remains 5% tablet.  When you try to load with tablet in dock, to restart, it would say error fan of keyboard dock, press F1 to continue.

  Only problem is that the dock was dead and don't react only not to the presses.  Loaded my Tablet plugged directly on the charger overnight which worked well but an hour now in charge just the dock and nothing.

  Does anyone else have this problem until the word is supported?

  Looks like I solved my problem, reset the battery with the hole of a paper clip on the back.  Took a few tries, having to go back really in there, so I was worried about it, but then the LED on the "Thinkpad" logo blinked, restarted with the tablet to dock and now work.

  Word to the wise, do not completely drain the battery of the dock