BlackBerry Smartphones Blackberry 9800 - file access slow - Please HELP

Similar Questions

• When I download java comes up with error 25099 decompression of files has failed Please help

  WHEN I DOWNLOAD JAVA ERROR HAPPENS 25099 FILE DECOMPRESSION FAILED PLEASE HELP

  Hello

  You get this error message when you download java or installing it?

  Read the following article that may help you.
  Error: 25099 during Java installation
  http://www.Java.com/en/download/help/error_25099.XML

• BlackBerry smartphones restart problem... Please help

  can someone tell me please how to restart my curve 8520?

  I have app updates, but cannot enter into my world of app until I have to reboot the device.

  He told me to hold down the power button, but all that is to disable the fone.

  can someone please help me because on my screen saying that I've updated knowing that I can not update the icon thing makes me want to throw the phone on the wall

  Thank you!!!

  fufuH wrote:

  makes me want to throw the phone on the wall

  Well, that might restart the device for once and for all!

  Perform a simple reboot on the BlackBerry this way: with smart BlackBerry poweredphone, remove the battery for a minute and then reinsert the battery to restart. A reboot in this manner is prescribed for most defects and errors of operating system, and you will lose any data on the device doing so.

  You can also press ALT + rightSHIFT + delete all three at the same time, to initiate a reboot.

  You will find thousands of messages here in the forum describing how this reboot is done.

  Good luck.

• Java download the file is damaged, please help

  When I try to install the latest version of java, I get the message "Download file C:/Users/Derek/AppData/Locallow/Sun/Java/jre1.6.0_21/jre1.6.0_21-c-l.msi is corrupt" I tried redownloading the file again and I still get the same message, I'm out of ideas, please help.

  Thanks for your help, I tried your solution and unfortunately it did not work.  I went on the website and it wasn't much of a help either.  However, I found the solution to my problem!  I don't know if this would be the same for everyone, but when I went to download the latest version of Java once more on the site, I clicked "RUN" instead of "SAVE", after it's over, I installed the download and it was not the mistake bad guy who kept occurring. : D

• My computer hp pavilion laptop runs very slow please help

  I bought a computer hp laptop pavilion g6 with i3 4 GB of ram and 1 GB graphics. It is only 9 months old and I've used it about 50 ~ 70 times alone. And now, it is very slow. I installed only 26 programs and no any program is larger than 1.5 GB but now it is running very slow and am very lag. So please help me what should I do?

  Open the troubleshooter of Performance
  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  Optimize Windows 7 for better performance
  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Ways to improve your computer's performance
  http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-your-computers-performance

• Redirection problem of record Smartphones blackBerry on my Bold 9900, please help

  Hello world

  I wonder if you guys can help me. I have BB bold 9900 and reconciliation works only to unread and read messages, but if I move any email or delete my Outlook, he won't have the effect on my BB device.

  Help, please.

  Thank you

  Bezi

  Thank you for your help,

  My problem solved,

  Solution:

  in the BlackBerry, need to go to messages and select options then display and action one finally check the "hide messages from field' and save it.

  Oh, Lool had after a few hours to play with the options.

  Thanks again,

  Bezi

• BlackBerry Smartphones cont enter email or texts please help!

  Hi, im abit new to BlackBerry and phone was doing well, this afternoon, I can not get into my emails or text messages, I can click on the icon for the two but so it's like it has frozen on me, and I have to press the button red power of appeal to get the icon! not sure if I've done something, but been trying all afternoon and no luck, if anyone can help me I would be very grateful.

  Thank you very much

  Hi and welcome to the forums!

  Try a traction battery (hard reset) as a first step.
  Thank you

  Bifocals

  KB02141 How to reset a BlackBerry smartphone

  No data will be lost when you do the following: remove the battery while the device is activated.
  Remplacer replace after one minute, let the device reboot 1-3 min, see if the problem is corrected.

• BlackBerry Smartphones Blackberry curve does not charge PLEASE HELP

  Hi can some one give me the phone number for the blackberry customer service as my blackberry phone will not charge tried 3 Chargers on it and the battery won't charge I'm looking for a number of customers with this problem you can call can anyone help me hear

  Hello!! I guess, you must contact your blackberry device provider to verify the physical delivery on a device... Try to find for your particular provider by Googling & get the number of treatments c, then simply call

• BlackBerry Smartphones can't run BlackBerry Protect... Please help...

  Hello

  I am using BlackBerry Protect. I am able to download and install the application on my BB 8220, but when I try to use it I get a message saying that the application is not compatible with BB Enterprise Server. I do NOT use BB Enterprise Server. I tried to uninstall / reinstall the application several times, but I still have exactly the same message. Can anyone help with this issue? Thanks in advance... Eduardo

  Hello, finally I changed my device for a BB 8520 and BB Protect seems to work fine now. The only problem I have now is that my new location of the device could not be identied by BB Protect. The rest of the functions work well. Thank you

• Smartphones BlackBerry 8350i texting issue (telus) Please help!

  I'm really tired of hearing about a fix in the works for the question to send SMS to the 8350i on the telus network.  I can not yet send a text or determine the sender of a text.  its been a couple of months with this another great phone, but I'm close to throwing it away.  someone at - he heard or know a specific date when this issue of texting can be resolved?  I can't yet believe that telus and or rim can not solve this problem, they understand that there are entrepreneurs who use the microphone and need a smartphone?  Maybe if they actually did one that worked, well, they would be surprised at the overwhelming sales of such a device.

  lose faith in my bb, anyone has the answers?

  I had a co-worker who was texting with the 8350i, but if they just recently shot I'd be upset too!

  Hmmm... Well, this is the exact reason, I went to bell and came down to the MICROPHONE... TELUS is not up to date MIKE phones and are not planning on this subject.  I'm not sure why they think that mike users aren't looking for smart phones that can text?

  in any case, the solution is to leave the MIKE network.

• BlackBerry Smartphones Pinch zoom stopped working suddenly - please help

  while I was using the torch and all of a sudden the pinch zoom feature has stopped working (or rear) - ideas? I thought maybe I hit a series of keys to cut the setting?

  I can zoom in/out via a double tap on the screen, or by using the mouse

  Did you take out the battery?  If this isn't the case, that give a try.

• the i tunes library.itl file is locked on a locked disk, no permission to access it please help!

  I tried to uncheck the read-only thing, but it won't work

  I need itunes!

  Hello

  1. What is the exact error message?
  2. when exactly you get this error message?
  3. don't you make changes on the computer before this problem?

  Try to take possession of the library.itl file and check.

  You can also try to contact Apple support team for assistance on this.

• Time loop writing file of Rio - please help

  Hello world

  I'm writing the data collected on the 32 channels of a module 9205 to memory on board a Rio-9074.  This isn't the final requirement of the application, but this is the first simple step.  Both the FPGA Vi and Vi of the host are attached to this post.

  Writing to the file produced inside the while loop, so that the outside while segments of loop files from time to time (this segmentation is a requirement of our application).  I have attached a sample file of release in this post as well (the output file opens in wordpad).

  In the output file, the second and the third column is a timestamp with fractional seconds.  The lead time is 5 Hz, but if you see the first lines in the output file, you will notice that it sometimes jumps an iteration of the loop - the timestamp, from 0.6 s to 1 s instead of s 0.6 to 0.8 s.  This occurs regularly throughout the file.  No idea if this due to a physical limitation of the hardware, or the clock, or if it's because of something in my program?  If you could please take a look at my program and help me optimize my screws or give me suggestions on why this delay occurs, I would really appreciate it.  Please let me know if you have other questions too, and I will answer them immediately.  Thank you!

  P.S - Writing on an SD card on a 9802 using these programs also causes the same problem.

  Good afternoon Derrick.

  The following link describes the RT FIFO that I mentioned in my previous post.  It is the method you want to follow to get the data from your host RT to your PC so that you can save data to the PC.  It is a method of choice (when it is an option) because of the increased storage capacity of a PC (in general) and the requirement of transformation to write in the file on the host of the RT.

  FIFO in real-time for deterministic data transfer screws

  http://zone.NI.com/DevZone/CDA/tut/p/ID/3934

  Alternatively, you can use something more similar to the example of "RT FIFO Communication.lvproj", found by searching FIFO in the Finder for example of NOR, to log on to the host of the RT.  Remember that you want to change this example; you don't want to write to the file in a timed loop because your hard drive / memory flash access is not deterministic.

• Windows 7 DMP files included BSOD Please Help!

  For last 1-2 weeks have BSOD on my pc. I reinstalled Windows 7 Home Premium several times. A few days after each re - install Win 7 I start receving BSOD. I formatted my disk, partitions, etc. I just need to solve these BSOD. I've included below DMP and Dump WhoCrashed logs files. In these papers he suggests that my drivers could be the cause of crashes of theses. Let me know what is wrong in the comments below.

  Thank you

  Mike Read

  DMP files:
  https://onedrive.live.com/redir?RESID=40F0655702713F9A%21176

  Data sheet:
  Motherboard:
  -All Series, ASUS, ASUSTeK COMPUTER Inc., Z87.-k.
  CPU:
  -GenuineIntel Intel (r) Core i5 - 4670 K CPU @ 3.40 GHz Intel586
  Graphics card:
  -GeForce GTX 660 ti
  RAM:
  -8 GB company unknown.<-------Ran memtest="" 86="" on="" this="" ram,="" no="">
  Hardrives:
  -C = disk 128 GB SanDisk SSD drive
  -Drive(Gaming/storage) E = TOSHIBA 2 to 7200 RPM 64 MB cache

  WhoCrashed reports:

  Saturday, may 10, 2014 3:55:02 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\050914-5023-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Bugcheck code: 0xA (0xFFFFF6FCC8078408, 0xFFFFF80002CE089A, 0x2, 0x0)
  Error: IRQL_NOT_LESS_OR_EQUAL
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that Microsoft Windows or a driver in mode accessed kernel memory paged at DISPATCH_LEVEL level or above.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Saturday, may 10, 2014 3:36:38 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\050914-10405-01.dmp
  This was probably caused by the following module: ntfs.sys (Ntfs + 0 x 4211)
  Verification of error code: 0 x 24 (0xFFFFF8800B088068, 0xFFFFF8800B0878C0, 0x1904FB, 0xFFFFF80002DBEB05)
  Error: NTFS_FILE_SYSTEM
  file path: C:\Windows\system32\drivers\ntfs.sys
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT file system driver
  Bug control description: This indicates there is a problem in the NTFS file system.
  The accident took place in a standard Microsoft module. Your system configuration is perhaps incorrect. Maybe this problem is caused by another driver on your system which cannot be identified at this time.

  Saturday, may 10, 2014 3:33:49 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\050914-28782-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Verification of error code: 0 x 34 (0x55F, 0xFFFFFFFFC0000420, 0 x 0 0 x 0)
  Error: CACHE_MANAGER
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that a problem has occurred in the file system cache manager.
  This could be a case of corruption of memory. The corruption of memory more often happens because of software errors in the defective drivers buggy, not because of RAM modules.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Saturday, may 10, 2014 3:29:40 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\050914-5912-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Bugcheck code: 0x1A (0xFFFFFA800339B0A0, 41790, 0 x 0 x 0, 0xFFFF)
  Error: MEMORY_MANAGEMENT
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that an error occurred serious memory management.
  This could be a case of corruption of memory. The corruption of memory more often happens because of software errors in the defective drivers buggy, not because of RAM modules.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Saturday, may 10, 2014 2:49:28 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\050914-54974-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Bugcheck code: 0x1A (0xFFFFFA80033A5C30, 41790, 0 x 0 x 0, 0xFFFF)
  Error: MEMORY_MANAGEMENT
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that an error occurred serious memory management.
  This could be a case of corruption of memory. The corruption of memory more often happens because of software errors in the defective drivers buggy, not because of RAM modules.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Saturday, may 10, 2014 2:40:44 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\050914-8829-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Bugcheck code: 0x1A (0xFFFFFA8003335C10, 41790, 0 x 0 x 0, 0xFFFF)
  Error: MEMORY_MANAGEMENT
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that an error occurred serious memory management.
  This could be a case of corruption of memory. The corruption of memory more often happens because of software errors in the defective drivers buggy, not because of RAM modules.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Saturday, may 10, 2014 2:37:22 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\050914-5506-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Bugcheck code: 0x3B (0xC0000005, 0xFFFFF80002ABDAC5, 0xFFFFF88009801810, 0x0)
  Error: SYSTEM_SERVICE_EXCEPTION
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Saturday, may 10, 2014 2:32:51 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\050914-7753-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Bugcheck code: 0x1A (0xFFFFFA8003389BE0, 41790, 0 x 0 x 0, 0xFFFF)
  Error: MEMORY_MANAGEMENT
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that an error occurred serious memory management.
  This could be a case of corruption of memory. The corruption of memory more often happens because of software errors in the defective drivers buggy, not because of RAM modules.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Hello

  We have three controls compatible bug:

  MEMORY_MANAGEMENT (1A)

  This indicates that an error occurred serious memory management.

  Error checking 1A, {41790, fffffa800339b0a0, ffff, 0}

  - Parameter 1 of the bug check is 41790 indicating a page table was corrupted.
  

  3: kd > dt nt! _MMPFN fffffa800339b0a0
  + 0 x 000 u1:
  + 0 x 008-u2:
  + 0 x 010 PteAddress: 0xfffff6fb'40000050 _MMPTE
  + 0 x 010 VolatilePteAddress: 0xfffff6fb'40000050 empty
  + lock 0 x 010: 0n1073741904
  + 0 x 010 PteLong: 0xfffff6fb'40000050
  + 0 x 018 u3:
     + 0x01c UsedPageTableEntries: 0xffff
  + 0x01e VaType: 0 ''
  + 0x01f ViewCount: 0 "
  + 0 x 020 OriginalPte: _MMPTE
  + 0 x 020 AweReferenceCount: 0n128
  + 0 x 028 u4:

  UPTE has fallen below zero, which implies usually a driver caused the corruption (or faulty RAM memory).

  System_service_exception (3B)

  This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
  
  This error has been linked to the excessive use of expanded memory and resulting from user mode graphics drivers enjambment and passing data incorrect of the kernel code.

  Bugcheck 3B, {c0000005, fffff80002abdac5, fffff88009801810, 0}

  3: kd > fffff80002abdac5 ln
  (fffff800'02abdac5)   nt! ExpInterlockedPopEntrySListFault16 |  (fffff800'02abdad0) nt! ExpInterlockedPopEntrySListEnd16

  The exception is produced in nt! ExpInterlockedPopEntrySListFault16.

  PAGE_FAULT_IN_NONPAGED_AREA (50)

  This indicates that invalid system memory was referenced.

  Bug control 0 x 50 usually occurs after the installation of a faulty hardware or installation failure of material (usually associated with defective RAM, either main memory, L2 RAM or RAM video cache).

  Another common cause is a defective system service installation.

  Antivirus software can also trigger this error, as can a corrupted NTFS volume.

  ---------------------

  Run Memtest for NO LESS than ~ 8 going on (several hours):

  Memtest86 +:

  Download Memtest86 + here:

  http://www.memtest.org/

  Which should I download?

  You can either download the ISO pre-built you want to burn to a CD and then boot from the CD, or you can download the automatic installer of the USB. What this will do is format your USB drive, make a boot device and then install the necessary files. Both do the same job, it's just you that you choose, or you have available (be it CD or USB).

  Note that some older generation motherboards do not support USB boot, your only option is CD (or floppy if you really wanted to).

  How Memtest works:

  Memtest86 writes a series of test patterns for most of the addresses of memory, reads the written data and compares it to find errors.

  The default pass is 9 different tests, varying in the modes of access and test data. A tenth test, bland, is selectable in the menu. He wrote all the memory with zeros, then sleeps 90 minutes before checking to see if the bits have changed (perhaps because of refresh problems). This is repeated with all those for a total time of 3 hours by pass.

  Many chipsets can report RAM speed and timings by SPD (Serial Presence Detect) or EPP (Enhanced Performance Profiles), and some even support changing the expected memory speed. If the expected memory speed is overclockee, Memtest86 can test that memory is free of error with these faster settings.

  Some hardware is able to report the status of the "PAT" (PAT: active or PAT: disabled). This is a reference to the Intel performance acceleration technology; There may be the BIOS settings that affect this aspect of memory synchronization.

  This information, if it is available for the program, can be displayed via a menu option.

  Other questions, they can most likely be answered by reading this excellent guide here:

  http://Forum.canardpc.com/threads/28864-FAQ-please-read-before-posting

  Kind regards

  Patrick

• 2011 27 "iMac running very slow - please help

  Hello, I know it's an old computer, but it makes no sense as to why it is slow. When I got it, it was fast as lightning, now he struggles to keep Chrome and Photoshop open at the same time. I have reset the PRAM and SMC a couple of times, no results. The fans do not run particularly fast, and it's never really too hot. It's very slow start as well, and most of the time that I hesitate to open anything at startup for 5-10 minutes for fear of this gel horribly.

  OS X Yosemite

  10.10.5 version

  iMac (27 inch, mid 2011)

  Processor Intel Core i5 at 2.7 GHz

  4 GB 1333 MHz DDR3 memory

  AMD Radeon HD 6770 M 512 MB graphics card

  I'm free to Go 602,21 Go 999,35. Is not as if he reaches its peak to storage, and it's not as if it was a bad computer. Checked for anti-virus, so nothing has jumped to the top. Love insight as to why this iMac has become a potato.

  Thank you

  scripttion

  Please download and run a report of EtreCheck and then copy and paste the results into your answer.

  https://etrecheck.com

  That should reveal the reason why your Mac is slowing down.

  Otherwise, it's just a guessing game.

  Personal data is shared in the report

  One thing you can try since it is slow to start. Open System Preferences > users and groups > login items. Delete a connection point at the time, and then restart your Mac to test.