BlackBerry Smartphones cannot install Blackberry software for pc

Similar Questions

• ScanJet G4050: Cannot install full software for my scanner G4050 on Dell XPS 8900 Win 7

  When I try to install the downloaded software installation tells me that it cannot find any USB hardware or the USB drivers.

  When I plug the scanner Windows installs it and shows in display devices and printers.

  I can click on it and it will scan a picture, but gives me no control on what I might be scanning.

  I unplugged the USB cable from the scanner to the computer, removed the printer from devices and printers and tried to reinstall the software.  Still no joy.  I have no problem with other USB devices.

  Any help appreciated.

  Hello

  Thank you for using the HP Forums.

  You can try this alternative Scan software:

  HP extended Scan

  FTP://FTP.HP.com/pub/scanners/HPScanExt/HPScanExt.msi

  Once it has downloaded and installed, go to start > all programs > HP > HP Scan extended > Run "HP Scan extended.

  Let us know if it works.

• Cannot install drivers/software for AOI C4599

  I just bought an of C4599 all-in-one printer at the end of December.  I have fresh installed XP in the past two weeks.  Thru auto update, my version of XP's SP3, version 2002.  I have set up the material part (installed ink and ran through the alignment).  Now, I try to install the drivers and software.  I put the CD.  It auto run to a simple menu, where I clicked on install.  During step 1, he froze about 15% complete.  I left it alone for about 20 minutes, when I came back to her, she was still frozen in the same place.  I hit Ctrl-Alt-Del and attempted to stop the installation process.  I could finally kill him after a few failed attempts.  Since then, I can't restart installation.  I was watching via Add/Remove Programs, I have looked through the list of processes and don't see anything that stands out as a "HP" program or a process.  My CD player is set to autorun, but this disc is not, I tried to launch the "Setup" program after exploring the CD and it will not work.  The printer is not connected to the computer again (as advised in the quick set-up guide).  Please tell us how to recover from this problem and complete the installation.

  I had similar problems with the 6310.  The FAQ had me uninstall all HP software and change the startup with msconfig (even if the start was not a problem for me).  I've always had problems, so I downloaded the drivers on the site and was able to install successfully. Now my problem is trying to get all software application.  I hope this helps some anyway.

• Impossible to install the software for 1536dnf

  I need assistance with the installation!

  When I run the installer for hp 1536dnf he takes out, only one after that:

  

  I get this message:

  

  In the 'problem details' are the following:

  Description:
    Stopped working
  
  Problem signature:
    Problem Event Name:   CLR20r3
    Problem Signature 01: hpbcsiinstaller.exe
    Problem Signature 02: 3.0.3.5253
    Problem Signature 03: 4cf952f9
    Problem Signature 04: hpbcsiCommonTools
    Problem Signature 05: 3.0.3.5253
    Problem Signature 06: 4cf9529f
    Problem Signature 07: 366
    Problem Signature 08: 4e
    Problem Signature 09: System.TypeInitialization
    OS Version:   6.1.7601.2.1.0.768.3
    Locale ID:    9242
  
  Read our privacy statement online:
    http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
  
  If the online privacy statement is not available, please read our privacy statement offline:
    C:\Windows\system32\en-US\erofflps.txt
  

  I actually do not need this software for printing, because the printer works fine on the network, but I need a way to analyze things on network and if I understand the only way to do that is through this software.

  I tried to download things from the support page, and nothing works.
  I even tried the fix of AMD processor, because there seems to be a similar error, but still nothing.

  I explored the installation files, I managed to install the application called "HP LJ M1530 Scan", but it does that if the printer is connected via USB, on when it is not then I get this error:

  

  Here is my configuration, if that helps:

  

  Additional information:

  The printer is brand new, and this error occurred on first installation. And as I say, printing works fine with the network drivers, but scanning is the problem.

  Please help, love this product, but I can't use USB whenever I need scanning.

  Thanks in advance

  Milos

  Here is therefore the deal about the origin of the subject "cannot install the software for 1536dnf.

  I had to remove some drivers duplicate on my pc, so I ended up remove bad. So I deleted everything in order to install a new copy, but the same problem occurred even with the new user.

  If I well on it and eventually find a real solution.

  And it is here:

  1. Press Start
  2. In Search type: msconfigand press on enter
  3. On the general tab, select Selective startup with Load system services and load original verified boot
  4. 
     Press Ok and restart the PC

  After the reboot, you will be able to install the software. When you are finished. Do the same as above, except for step 3, where you Normal start.

   

  Cause: I think that his coliding with some software "no stock" on my PC. That one is, given.

   

• can not install the software for all in one photosmart 2610xi of disc of windows 7 pc

  I can't install the software for all in one photosmart 2610xi of disc of windows 7 pc.  Goes so far then stops and says cannot use the command "run as".  I am the administrator and logged as such.  I would like to use the software provided with to send faxes and others.  I can use the printer since the buttons on the printer and it prints from all programs... I just wanted to use this software.  Any suggestions?

  Thank you

  Hello

  The installation disk supplied with the printer is not compatible with Windows 7, as the device was manufactured prior to release of Windows 7.
  No matter which compatible OS are registered on the CD...

  A newer version of the software for Windows 7 can be downloaded from the HP site.

  Before installing the software, be sure to follow the steps below:

  1. Enter the control panel > devices and printers.
  2. Right-click on the icon Photosmart 2610 and lick to withdraw an instrument.
  3. Disconnect the USB cable between the printer and restart your PC.
  4. Follow the below installation, do not connect USB until prompted to do so during the installation of the software:
     http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-76831-1&cc=us&DLC=en&LC=en&OS=4062&product=421134&sw_lang=

  Kind regards

  Shlomi

• Impossible to install the software for printer AIO C6250

  Whenever I try to install the software for my printer C6250, I get an error message saying "unable to find a specific file" the file is C:\Users\DrAnth-1\Appdata\Local\Temp\7zS5FBE\setup\... \blocksysus.

  I can't find this file on my computer.  The installation stops and I'm back where I started.

  Can someone help me?

  Tony, you updated to Vista? To run the cleaning brush to make sure that we get rid of everything left on the software. Heres how:

  Of the Original installation CD:
  1. Insert the CD in the drive and then cancel Setup
  2. open my computer and click right then on the CD from the drive and select open
  3 open the Util folder
  4 open the CCC folder
  5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe
  6. once the uninstall is complete, restart the computer
  7 run the Accessories\ System Tools Disk Cleanup
  8. download and install the latest version of Adobe flash player
  http://www.Adobe.com/support/flashplayer/downloads.html
  9 download drivers and full software features
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-76043-1&cc=us&DLC=en&LC=en&OS=4063&product=3308554&sw_lang=
  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:
  1. type % temp % in the field of race
  2. Locate and open the folder starting with 7z (example: 7zS2356)
  3 open the Util folder
  4 open the CCC folder
  5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe
  6. once the uninstall is complete, restart the computer
  7 run the Accessories\ System Tools Disk Cleanup
  8. download and install the latest version of Adobe flash player
  http://www.Adobe.com/support/flashplayer/downloads.html
  9 download drivers and full software features
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-76043-1&cc=us&DLC=en&LC=en&OS=4063&product=3308554&sw_lang=
  10. run the download to reinstall the printer

  Let me know if this solved your problem.

  Thank you!

  Sean

• HP 15r-250tu: cannot install the drivers for the new laptop

  Hi expert, I bought a new laptop from hp 15r-250tu. I installed windows 7 ultimate (64-bit) service Pack 1. Cannot install the drivers for my laptop.i IAM downloaded all the drivers available on the site of hp for this model laptop.i tried to install them in the order as the mentioned error messages, but get that my phone does not support these drivers. Please answer me with links of driver and sequence to install. Thank you.

  Hello:

  Use the W7 x 64 drivers for the HP 250 G2 on your model except file BIOS, firmware, wireless and bluetooth.

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5449369&swLangOid=8&swEnvOid=4059

  Wireless:

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943827&swItemId=ob_149229_1&swEnvOid=4058

  Bluetooth:

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_149791_1

• In my portable automatic update, cannot install the update for windows Vista (KB972145) he gave the Code 80004005 error message and the second time error code 8007000D

  In my portable automatic update, cannot install the update for windows Vista (KB972145) he gave the Code 80004005 error message and error code 8007000D twice. How can you help me solve this problem

  0X8007000D ERROR_INVALID_DATA

  Try to manually download the update and installation
  http://www.Microsoft.com/downloads/en/results.aspx?FREETEXT=KB972145&displaylang=en&sType=s_basic

  It will not appear in your history after a manual installation, but it will show the updates installed in view area. TaurArian [MVP] 2005-2010 - Update Services

• Cannot find the software for my ms wireless laser mouse 8000

  Cannot find the software for my ms wireless laser mouse 8000

  I don't know why you posted this in the forum Office XP, so I moved it to Windows XP 'Hardware and drivers' forum.

  You can find the drivers for the Wireless Laser Mouse 8000 here: http://www.microsoft.com/hardware/en-us/d/wireless-laser-mouse-8000

• cannot install update security for Windows XP (KB2686509)

  cannot install update security for Windows XP (KB2686509)

  Hello, gsfl Jg,

  Open Windows Update and check if KB2686509 and KB2676562 are or are not installed.

  When you tried to install the update, you would have received an error code.  Please return this zip code which lies in Windows Update.

  Why this update is offered again several times?

  Windows updates are revived until the update is installed on your computer. If this update is already, perhaps an installation failure has occurred. Check log files to install KB for the error codes. For example, the log file of installation KB for this security update would probably "C:\Windows\ KB2686509.log"
  For more information about how to resolve these problems, click on the number below to view the article in the Microsoft Knowledge Base:

  958051 (http://support.microsoft.com/kb/958051/) you receive a "0x8007F0F4" error code when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site

  What should I do if the installation of this update fails with the error "0x8007F0F4"?

  If you receive the "0x8007F0F4" error when you try to install this security update, follow these steps:

  1. Open the Faultykeyboard.log file that is located in the folder %windir%. This log file contains information about the registered keyboard layout files that are not in the folder % Windir%\System32. The log file will resemble the following:
     Keyboard1.dll.\Layoutfiles\keyboard2.dll C:\Windows\System\Kbda1.dll

     Note In this example, the first entry is just a file name. The second entry includes a relative path with the name of the file. The third category includes a full path of the file.

  2. Copy the files that are listed in the Faultykeyboard.log log file in the System32 folder.

  Note Contact Microsoft technical support if you can't find the Faultykeyboard.log file.

  http://support.Microsoft.com/kb/2686509

• I can't install the software for my printer of series e-all-in-one-hp deskjet 3070 on my mac.

  Hello

  I just bought an hp deskjet 3070 series e-all-in-one printer and it says that I'm unable to install the software for it because it requires 10.6 or below. Any suggestions on how to get this up and running?

  Thank you

  Tim

  Hi Tim,.

  The CD that came in the box is not intended for Lion mountain as the printer was made before the release of the OS.

  You can download the latest version of the software for your operating system below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-107189-2&cc=us&DLC=en&LC=en&OS=219&product=5068754&sw_lang=

  After completign the installation, be sure to restart and update the software by clicking the Apple icon, then software updated.

  Shlomi

• Cannot install new software because XP has said that there is another current installation

  I try to install the new software of the printer and it stops telling me that there is an another current facility and cannot install new software until the current instalation ends.  She does whenever I try to install new software.  He did it with zune, Quicken, etc.

  Hello

  1. have you you can all changes on the computer before this problem?

  Check if the problem persists in the clean boot state.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

• Error - Lifecam3.60.exe is not a valid Win32 application. Failed to install the software for Microsoft VX5000 webcam.

  Original title: impossible to install the software for vx5000 webcam.

  I tried to download with Firefox; the first time it shut down my computer, the second time, he showed, it was the download of files, but after an hour more, I let down, then switch to IE.

  I tried to install Microsoft vx5000 webcam software in win xp.  has no charge. I then downloaded last update 3.6 Lifecam and I get the message "Lifecam3.60.exe is not a valid Win32 application.   What to do next?

  Hi golferfrankholeinone,

  You can follow this link and check if it helps.

  Troubleshooting, install the Intellipoint or IntelliType software, LifeCam.

  Hope the helps of information.

  Please post back and we do know.

• Windows needs to install driver software for your DCC

  I installed the double mod. Windows Vista Ultimate & windows 8.1. When I started to pass on my laptop running windows Vista, it takes 5 minutes to open a session and message displays Windows needs to install driver software for your model of control abstract CDC (ACM)

  I don't understand how I can solve this problem.

  Thank you

  Try this link.

  https://social.technet.Microsoft.com/search/en-us?query=dual%20mode%20driver%20SOFTWARE%20CDC%20abstract%20control%20model%20$ $ACM & ac = 5 #refinementChanges = & pageNumber = 1 & showMore = false

  In addition, with some PCs, you can select boot options, with dell, the F12 key to start the pc. Also, try this link for dual

  Starting the OS.

  https://social.technet.Microsoft.com/search/en-us?query=dual%20mode%20pc%20startup&AC=6#refinementChanges=60&PageNumber=1&showMore=false

• Cannot install printer software

  Try to install the software for the new printer and it does not allow me to. I changed our main account user to the Administrators group and rebooted the computer and the error msg still appears when I try to install the software that I am not an administrator. I even tried to disable UAC temporarily to allow installation and the error msg always comes to the top. Any suggestions? Tried to create a new user to be admin, but it would not allow me to create.

  When you go to run Setup, right-click on it and select run as administrator from the context menu; you will need to provide your credentials for administrator (user name and password).

  Kind regards

• Cannot install drivers etc for HP deskjet F4580 on Windows Vista

  Try to install the software for hp deskjet F4580 get the following: error 'write to c:\windows\installer\1397b.msi. MSI.NET error Fatal 40 "Device Manager there are results for windows 7, but I have VISTA.

  Salvation (IEM),

  Here is a solution I found in another thread:

  http://social.answers.Microsoft.com/forums/en-us/w7hardware/thread/1a7011a0-7370-4368-86BA-800d9d1b55ea

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.