Cannot install printer software

Similar Questions

• Cannot install new software because XP has said that there is another current installation

  I try to install the new software of the printer and it stops telling me that there is an another current facility and cannot install new software until the current instalation ends.  She does whenever I try to install new software.  He did it with zune, Quicken, etc.

  Hello

  1. have you you can all changes on the computer before this problem?

  Check if the problem persists in the clean boot state.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

• OfficeJet Pro 8620: Cannot download printing software

  I just downloaded the HP Easy Start software for my printer on HP web site without problem.  Running the software to set up my printer it starts to download the crucial software.  After downloading for a while, it displays the following error message, "cannot install the software.  Cannot download the software.  Check your network connection and then try again. »

  

  This message has initially started after 6MB were downloaded.  However, whenever I hit OK and the download began immediately to treat once again, the number of MB are needed until the message occurs an increase slightly.  It seems to increase by 1 MB, whenever I have reprocessed the download.

  There is no apparent problem with my connection to the network.  All other programs and devices connect to the network without problem.  I'm operating a 27-inch iMAC late 2014 with 4 GHz Intel Core i7 processors and 32 GB of DDR3 memory.  The OS is El Capitan Version 10.11.1.  My router is a Capsule 3 TB.

  Hello

  Try to install the software via Software Update as follows:

  http://support.HP.com/us-en/document/c04510394/

  Then, install the HP Easy Scan application below:

  https://iTunes.Apple.com/us/app/HP-easy-scan/id967004861?MT=12

  Please let me know the results, the steps above provide all the features, exactly as does HP Easy Start.

  Shlomi

• I get a "cannot install printer because a policy has been enabled on your computer that blocks NT 4.0 driver ' how can I install my printer?

  I have a HP Pavilion dv6500 running Vista 32 bit. I just bought a new printer, a HP Photosmart C4640, when I tried to install and connect I get a message indicating that it cannot install printer as a policy has been activated this block driver NT 4.0. I have run all updates of software and drivers, but still get this message. I've been at this for almost a week now. I've been doing the HP race with regard to aid. I am VERY fusturated at this point and desperately need help. What should I do to make this work?

  Hi jessheffernan2003,

  This problem occurs because Windows Vista does not support the installation of kernel-mode printer drivers. Windows Vista only supports installing user mode printer drivers.

  To work around this problem, try to get and install a printer driver as a user on the Windows NT 4.0 computer. If you can not get the particular user mode printer driver, try to get a driver printer in user mode compatible with the kernel mode printer driver which is hosted on the Windows NT 4.0 computer. To get a printer driver updated for the print device, contact the manufacturer of the printer.

  For more information about your hardware manufacturer, visit the following Web site:

  http://support.Microsoft.com/GP/vendors/en-us

  Note: Microsoft provides third-party contact information to help you find technical support. These details may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.

  For more information, see the link below:

  Error message when you try to connect to a printer in Windows Vista: "the printer driver is not compatible with a policy enabled on your computer that blocks NT 4.0 drivers.

  http://support.Microsoft.com/kb/931719/

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Failure to install printer software package

  Hello. Am I the only person having this problem? The printer I have is an all-in-one Officejet 8500 Pro Wireless (A909g). My operating system is windows 8.1. I downloaded the software OJ_AIO_P8500_A909_Full_Win_WW_140_408 and on 2 of three of my computers when I run the program and click 'install', I get a pop information window telling me that the program does not find a file. Then I have to close the program that I can not go any further. The pc alone it will run on is my Sony vaio laptop running windows... wait, 8.1?

  Has anyone, same HP, you have a solution to this problem? Are there any new installation of software from 2012 programs?

  Hi Phil_boy,

  Welcome to the Forums of HP,

  I see that you have a problem with the installation of the printer on your computer Windows 8.1.

  I have a few steps we can browse.

  First of all, please make sure that you have the printer power cable connected directly to a wall outlet and not a bar/power strip. Here is a document that uses a LaserJet printer for example, but it is intended for HP products in general. Please click the link which explains the problems when connected to an uninterruptible power supply/Strip/surge protector power.

  I have also found a document that addresses for the installed printer in Windows 8.1, a Message "System cannot find the specified file" is displayed on the computer.

  Please do not hesitate to write me again if you have any questions or concerns.

  See you soon,.

• OfficeJet Pro 8600 Plus: Officejet Pro more than 8600 - cannot install printer on Windows 10

  I have upgraded from Windows 7 to Windows 10 and CANNOT install the printer.

  After the upgrade, the HP software prompted me to reconnect to the printer.  I chose for a wireless connection.

  The process hangs / locks the screen shown on the picture below.  I have tried just about EVERY related solutions posted in the community and have come-up-small.

  Did anyone else out there having the same problem?

  

  hjs_19... Thanks much for the reply.

  I was finally able to solve the problem using 'Reset this PC' in Windows 10 - see pictures below.

  My system has been corrupted somehow.  I don't know what was the cause, but the system works better than ever now (Lenovo T430 8 MB of RAM).  The process of 'Reset this PC' purged MANY foreigners "tricks" of the machine.

  

  

• Cannot install printer Canon MP640 USB to Satellite L500

  I tried to install a Canon MP640 printer with USB on the two Satellite L500 connection and A300 - after installation of the software I get the message "USB Device" not recognized - the L500 running Windows 7 the A300 runs Vista - printer * done * on an old desktop PC with XP - cable settings and printers are good!

  I downloaded the latest Canon drivers, reinstalled, etc. - when I plug the USB I get the message - "USB device not recognized".

  I ran a Canon MP270 successfully both L500 and A300 previously.

  > installing the software, I get the message "USB device" not recognized - the L500 running Windows 7 A300 runs Vista - the printer works on an old desktop PC with XP - then the parameters of cable and printers are good!

  Are you sure the printer software you have installed on two laptops (with Win 7 and Vista)'s Win 7/Vista compatible and supported?

  I mean you have tried the software on the computer running Win XP as s ok but in your case, I would like to ask the manufacturer of the printer if the printer software is 100% compatible with Windows 7 and vista OS.

  Welcome them

• Cannot install HP Software Solutions for C5550 on Vista

  I recently bought a new Photosmart C5550 all-in-one printer. I spent two full days, try to install the software on my Vista desktop. After countless hours on the phone with technical support to get the same results (fatal error & Windows Installer problems), I was told to contact the computer manufacturer. Another two hours on the phone with tech support and was told to reinstall Windows. I've done reluctantly. I received all of the updates in my installed security software and then tried the printer... same results as before reintsalling Windows. I tried to reformat once more, updates installed and then installed the printer drivers & software before installing security software. It actually installed and worked very well.  Last week, I discovered that there is an updated driver and software of the printer so I decided to install it, don't think not that I would have the same problems. Is it installed perfectly on my laptop (which she had done before), but would not install it on my desktop. After another few hours in line with the technical support I uninstalled all the software and printer drivers & stop all unnecessary processes (including security software), but still no luck. I am now without a printer on my desk and can't figure out what to do. I don't want to have to reformat again and try to install. I wonder if I uninstall my security software if it works because the printer seems to install without security software installed. Any help will be appreciated. Thank you!

  Just to update, I registered & re-recorded MSI before installing since that was the error message that I kept getting.

• Cannot install printer solutions Center

  for a week I tried everything to install my all in one printer (F2400).

  That's what I do:

  I have uninstall all files via congurationscreen (remove programs)

  Clean computer with avg pc tuneup and regcure

  I run install (as admin) witch downloaded folder has been chosen for me by hppiw program

  During the configuration phase it is following error:

  Appdata/temp/TzS1867/hpzsetup.exe

  "irreparable error during installation"

  and the program says it automatically uninstall files, but they are always in the hp folder.

  printer and scanner work fine, but there is no solution Center.  There is no file .exe for solutioncenter in

  ProgramFiles/hp/digital imaging/bin

  I tried all possible solutions on the web, but nothing will.

  This link is no longer valid

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-77737-1&LC=en&DLC=en&cc=us&...

  I can do more / I've done wrong?

  This link is no longer active

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-77737-1&LC=en&DLC=en&cc=us&...

  Hey @brommmmm,

  One thing we know for sure is that your computer and the printer doesn't seem to like. I think that there are problems with your registry that are causing all these different errors, especially since the error log for the program installation continues to point to the registry key: HKLM\SOFTWARE\Hewlett-Packard\Install\ {BCDD692B-17 2D-440-9A1B-501C71D72CC8} for permissions problems. I have a little more suggestions to solve these problems in System.

  Step 1: Uninstall your printer software and drivers

  Step 2: Run the CCleaner on your computer to fix registry issues:

  CCleaner

  Step 3: Unlock hidden Admin account:

  1. Open the display Start again by clicking the Windows start at the bottom of your computer screen icon or by selecting the Windows button in the bottom left of your keyboard to the right of the Ctrl key.
  2. Once the splash screen opens, type command prompt
  3. Once the result of the search for the command prompt appears, do a right click on it and "run as administrator"
  4. Once the command prompt opens type: net user administrator / Active: Yes and press ENTER.
  5. Then, restart your computer
  6. When your computer turns back on, you should be able to log in to the new administrator account that appears. This account will not have a password on it.
  7. If your computer will automatically connect to your normal spending users user account and log on to the administrator account.

  Step 4: Install printer:

  1. Once you are logged into the new account administrator download and run the installation of your printer: HP Deskjet F2400 all-in-One series Full Feature Software and Driver
  2. Start the installation of your printer.
  3. Once the printer installs successfully log on the administrator account and log in to your normal user account. The printer should now be installed on your normal user account.

  Step 5: Disable the hidden Admin account:

  1. Open the display Start again by clicking the Windows start at the bottom of your computer screen icon or by selecting the Windows button in the bottom left of your keyboard to the right of the Ctrl key.
  2. Once the splash screen opens, type command prompt
  3. Once the result of the search for the command prompt appears, do a right click on it and "run as administrator"
  4. Once the command prompt opens type: net user administrator / active: No. and press ENTER.
  5. Then, restart your computer

  Please respond and let me know if everything works now. Fingers crossed!

• LaseJet M1530 MFP: Cannot install printer multifunction LaserJet M1530 on Windows 10 drivers

  I tried to install the downloaded driver software from http://support.hp.com/us-en/drivers/selfservice/HP-LaserJet-Pro-M1536-Multifunction-Printer-series/3... for my multifunction printer drivers LaserJet M1530 on my new windows 10 Pro o/s, but it has always failed with the message below. Restarted my laptop and I tried installing several times, are the same mistakes. Also, I installed the old drivers from the CD supplied with the printer, the same error as shown.

  The drivers is not compatible to Windows 10? Any suggestion to solve this problems?

  

  Hello @chrislim2888,

  It is a great place to get help! I read your post and see that you are unable to install the printer on the computer Windows 10. Thank you for providing all the information and the screenshot. I want to help you solve this problem.

  I have provided with steps to unlock the hidden administrator account and the installation of the printer on this account to see if this will help this situation.
   
  Note: Do not connect the USB cable until you are prompted during the installation.

  • Go to your Start menu and in the box "search programs and files", type CMD.
  • CMD will fill as an option to search above, just right-click on it and "run as Administrator".
  • Once opens in CMD (command prompt), type net user administrator / Active: Yes and press ENTER.
  • Then, close CMD and then restart your computer.
  • When your computer is on the newspaper in the new account which should show. It will be called Administrator and will not have a password on it.
  • If your computer automatically connects to your account after the restart then go to your Start menu and click on the arrow next to 'shutdown' and choose 'change user '. Now log on to the administrator account, that we have just released.
  • Under the administrator account, install the printer software.
  • Immediately after connecting the USB cable, follow the steps described in this paper: A Fatal Error displays during Installation of the software. This should resolve this error message.
  • Test the printer.
  • To disable the Admin account start at step 1 and type net user administrator / active: No..

  How is the printer connected?

  Please click the 'Thumbs Up' to thank me for my efforts! If this helps you resolve the problem you are experiencing, please click the "accept as Solution. Keep me posted. Good luck!

• Update to Windows 7 RTM failing - error 80070652 - cannot install new software or run Windows Update successfully.

  I upgraded from Win 7 RC for Win 7 RTM on my 64-bit machine from Dell and started installing all my software.  Everything was fine until I started Windows Update and had a list of 15 updates that needed to be done.  Several have had agreements that I had to accept, he wasn't the normal process of "update in the background.  I had to leave and is concerned to let the process of continuous updating on its own and potentially hang, so I cancelled it.

  Since then, I can't install any software or to upgrade my system.  Updates fail with the error message "WindowsUpdate_80070652" which seems to be undefined.  In some cases, I get an error message another installation is running and the current installation or update cannot be performed until the end of the current installation.

  I restarted my dozens of machine time and then immediately began installing or upgrading windows - without success.

  Any suggestions would be greatly appreciated.  It seems that there is a dead plant that does not block updates and installs.

  Jeff

  It is not an error "undefined":

  WindowsUpdate_80070652 = ErrorClientUpdateInProgress ERROR_INSTALL_ALREADY_RUNNING
  The program to be upgraded is may be missing or the patch may update a different version of the program

  You could always...

  Launch a collateral request for assistance free Windows Update:
  https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

  ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

• Cannot install all software: error: an application not valid win 32

  I can't install any software and so or troubleshoot using microsoft fixit tool as they don't install it, analyses using malwarebytes and nothing came, iam at wits end.tried to use scandisk and cannot open it because of win 32 error and run as admin does not work either.

  Original title: the user interface have a pad with windows home premiun thinj lenovo and when I try to click on an icon I have an application not valid win 32

  Hello

  This problem may be caused by one of the options below.

  1. the file is corrupt, missing, or bad.

  2 file is not designed for your version of Windows.

  3. the file is a virus, worm or other malicious program file.

  4. incompatibility of hardware.

  Step 1: Check if the problem continues in a new user account.

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Step 2: If the problem does not persist in a new user account, then refer to the following article to fix a corrupted user account.

  Difficulty of a corrupt user profile: http://windows.microsoft.com/en-US/windows-vista/fix-a-corrupted-user-profile

• Cannot install printer Canon MX 726

  Installation. Support 5101. asking for the removal of material on door-under the front flap RH, there a small black sqare, if it was like really stuck rempved on? Also impossible to download the disc.

  Hello

  If this isn't a driver problem there is a problem of setting or material and you
  need to contact Canon.

  As Canon OEM is responsible for the good operation of the printer and their
  drivers provided. Check with Canon support, online documentation, and
  drivers.

  Good luck, you need to update or reinstall the latest driver.

  Canon - PIXMA MX726 - software and drivers<- select="" your="" version="" of="">
  http://search-au.canon.com.au/canon__au_en__au_en/search.x?q=&ie=utf8&cat=0&d=DOWNLOADS%09Windows+10+%28x64%29&ct=Support&imgsize=1&pdf=ok&zoom=1&hf=category%09zubaken&cf=model_sm%3APIXMA+MX726&modelName=PIXMA+MX726&ref=search-au.canon.com.au&pid=w6YmqOMtBhRIscFoO5ivxA..&qid=Af7zzD9H48oQ1mI8d_B4lRC7j2s5IqGL&pagemax=30&page=1

  This is the USA and Australia similar aura.

  Canon - Support and drivers USA
  http://www.USA.Canon.com/Cusa/support/consumer

  Canon - Support - contact us
  http://www.USA.Canon.com/Cusa/consumer/standard_display/contact_us_consumer

  Canon - Windows - Vista and Windows 7 support
  http://www.USA.Canon.com/Cusa/consumer/products?pageKeyCode=windowsSupport

  Canon printer - page local confirmation - could be from another region.
  http://pdisp01.c-WSS.com/OS/

  ====================================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Error when you try to install QuickTime: another installation is being run-cannot install new software

  Original title: another installation is being run-canot install new software.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I can't identify what software is running. I had this problem in recent weeks. It cannot install QuickTime.
  Thank you

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi marvinsadovsky,

  ·        What is the exact error you get when you try to install QuickTime?

  ·        You are able to install any other application?

  You try to install QuickTime by starting the computer in a clean boot state, because some background programs may interfere with the installation process. To put the computer in a clean boot state, follow the link below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot install printer

  Hi there I downloaded hp print driver and couldnot install printer as file window that don't know what it is I might have uninstall a program that took the missing prn file or / file prn but initially every time computer I see yellow signal in tools sysdtem Device Manager tried to restore the computer but restore has been checked , I don't know how, but here it is.

  can you help me please

  Hi there I downloaded hp print driver and couldnot install printer as file window that don't know what it is I might have uninstall a program that took the missing prn file or / file prn but initially every time computer I see yellow signal in tools sysdtem Device Manager tried to restore the computer but restore has been checked , I don't know how, but here it is.

  can you help me please

  http://michaelstevenstech.com/XPrepairinstall.htm