can not install the software for all in one photosmart 2610xi of disc of windows 7 pc
I can't install the software for all in one photosmart 2610xi of disc of windows 7 pc. Goes so far then stops and says cannot use the command "run as". I am the administrator and logged as such. I would like to use the software provided with to send faxes and others. I can use the printer since the buttons on the printer and it prints from all programs... I just wanted to use this software. Any suggestions?
Thank you
Hello
The installation disk supplied with the printer is not compatible with Windows 7, as the device was manufactured prior to release of Windows 7.
No matter which compatible OS are registered on the CD...
A newer version of the software for Windows 7 can be downloaded from the HP site.
Before installing the software, be sure to follow the steps below:
- Enter the control panel > devices and printers.
- Right-click on the icon Photosmart 2610 and lick to withdraw an instrument.
- Disconnect the USB cable between the printer and restart your PC.
- Follow the below installation, do not connect USB until prompted to do so during the installation of the software:
http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-76831-1&cc=us&DLC=en&LC=en&OS=4062&product=421134&sw_lang=
Kind regards
Shlomi
Tags: HP Printers
Similar Questions
-
Can not install the software for my HP Photosmart Plus B209 on Windows 8.1
I could not install the driver/software package downloaded for my HP Photosmart Plus B209 Printer on my new HP laptop w/Windows 8.1. I get an error message that the following file is missing; \AppData\Local\Temp\7zS4D84\Setup\hpzshlaut4.0... I have 3 other computers of the OS windows 7 that I had no problem with the printer using this same download driver/software package. Any help you could offer would be greatly appreciated.
Hello
Follow the steps below and check if it solves the problem:1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.
Now, try to reinstall the HP software and check if the installation goes as planned.
If the problem persists, continue following the steps below:
2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
7. run the installation file and check all difference.Kind regards
Shlomi -
I can't install the software for my printer of series e-all-in-one-hp deskjet 3070 on my mac.
Hello
I just bought an hp deskjet 3070 series e-all-in-one printer and it says that I'm unable to install the software for it because it requires 10.6 or below. Any suggestions on how to get this up and running?
Thank you
Tim
Hi Tim,.
The CD that came in the box is not intended for Lion mountain as the printer was made before the release of the OS.
You can download the latest version of the software for your operating system below:
After completign the installation, be sure to restart and update the software by clicking the Apple icon, then software updated.
Shlomi
-
CAN´t install the software for mouse Hyperion G402
I can´t install the software, whenever I get the message: 'this software is not compatible with your operating system', I made sure I downlaoded the correct software for Windows 7, 64-bit. I called Logitech and I was told that it was a matter of Microsoft. Can someone help me please?
It is not a Windows problem, but clearly something is wrong, don't know why the software is not installed for you well.
I use software LGS on Win7 64 bit for years (G13, G710 + and a new all current G502 to run on)
version 8.56.109 software atm).
-Are you logged on as administrator?
-You have downloaded LGS 8.56.109 or 8.57.145?-There is a firmware update for the G402 on the next page, which can help
http://support.Logitech.com/en_US/downloads
-You can also try to install in safe mode (press on and hold F8 - or I believe F2 on some motherboards - before Windows logo appears).
clean boot or-
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
-I see that there are several threads on the forums of Logitech about your problem however.
Assistance telephone logi is perhaps not as good as the forums.
-If no suggestions on the existing threads can help you start your own.
Maybe you've already been there, but--
and no similar problems. If the file name ends with _x64 then you obviously do not have this problems either.
.
-
I can not load the software for my 2610 HP all-in-one cd in my laptop with windows 7
How to obtain and install the software on my new laptop windows 7 to exploit my all-in-one printer 2610? I also will always be able to control the desktop of windows xp printer?
Thank you very much. Tonight has downloaded the software from the link you sent & now able to print on both computers.
-
do not install the software for PSC 2355 using windows 7
Recently upgraded my system from windows XP to windows 7. The CD with the software indicates compatibility with Windows 98, Me, 2000 & XP. I tried to use it to install the software but received a message saying that it was not compatible. Need help, is there a way to bypass the message version and install or adownload available for me to use the HP University?
Hello Milliebee,
Welcome to the Forums of HP Support! I see that you have recently upgraded your computer from Windows XP to Windows 7 and you want compatible software and download drivers for your HP PSC 2355 with the HP Director program.
Now, because you're using a newer operating system with an old printer you install software and drivers by using the OS print driver, which means that there is no download available, but the driver was built into the operating system.
To better understand, please have a look here: installation of the printer software in Windows 7 for a USB cable connection, regarding the HP Director, it is no longer available. You may be able to get some third party options that can be comparable.
I hope this helps!
Thank you
-
Can not install the software as another installation is already install
When I try to install new software, my computer says that it is already install something, but I'm not. How can I find what the computer is installed so that I can cancel it and install the software, I need?
Hello
1. what software are you trying to install?
I would say you can do clean start and then install the software.
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
I suggest you follow the steps indicated by twinklingsky as dated April 20, 2010 from the link below.
-
Can not install my new HP All In One printer
Original title: CANNOT INSTALL a PRINTER ALL-IN-ONE COST of HP 5610
EVRY TIME I TRY TO INSTALL A FRSH HP5610 ALL-IN-ONE PRINTER, I GET THE MESSAGE AFTER
NO MISSING DLL FILES, SLBCSP, SCCBASE, GPKCSP ENUM I DOWNLOAD AND TRY TO INSTALL NOT NO CHANCESee if it helps:
Error blocks the installation of the HP printer driver: sccbase.dll, slbcsp.dll, gpkcsp.dll and Enum
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/error-blocking-HP-printer-driver-installation/5c7910a1-1b4b-404F-875e-12e092b07db1 -
Can not find the driver for my Ethernet controller HP laptop Pavilion 15 PC, Windows 7 64 bit
Hi there guys!
I searched like crazy for the right device for my Ethernet controller.
I found the device for my wireless so my wireless works now, that's what I use now the hollow a friend to this post. But we were to look with different programs "driver finder" and hollow the entire site of google and the manufacturing research and lookting pit these threds but I found no maby sulations failed...
I got a laptop HP Pavilion 15 running Windows 7 64 bit SP1. Original, it is Windows 8 Basic but as much, I don't like him and he retired. Everything works fine now just that it cannot find the software for the Ethernet device. I've been downloading different version of what I found, but none works.
I would be so grateful for your help!Hello:
This model ethernet driver should work.
-
Windows 7 - can not install the updates for my computer
Cannot install upgrads on my computer
DDzajko
Try to download it manually from http://www.microsoft.com/downloads
Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updatesOther suggestions:
Reset Windows Update components:
http://support.Microsoft.com/kb/971058
http://support.Microsoft.com/kb/883825Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: sfc/scannowThis will check for any breach of integrity
Restart your system
In addition, you can temporarily disable your Antivirus during installation.
Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP
-
can not install the updates to all the
I reset my computer to the settings factoruy and reinstalled everything with a ram upgrade and now I can not get windows to download updates.
I reset my computer to the settings factoruy and reinstalled everything with a ram upgrade and now I can not get windows to download updates.
Did you manually install SP2 and SP3 first?
Refer to this post similar to yours:
http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/how-can-i-get-Windows-Update-error-x8024400a/35ba7694-c9b2-4043-a4c0-777d4b7736dc -
My CD player is more listed under "my computer so I can not install the software."
I have a mobile Pavilion 6700 using Vista. I need to reinstall my printer but can't find my disc. Is it possible to find? I don't have the disks because the software has been editing.
Yes he's here thank you very much!
-
I can not install the software on the second PC
I have a subscription to the CC license, but when I try to install the program on a second computer, Adob offers me to buy again, why?
Hello
Please check the help below document:
Applications creative Cloud back in test mode after an update until 2015 for CC
Kind regards
Sheena
-
I run Windows 7 (64-bit version) and can not install the scanner for a M175nw MFP driver
... and we have tried all the advice from HP (reboot & restart installation; check printing spoller; download S/W of resettlement HP & attempeted etc..) The utility of Diagnostic Scanner - properly! m ' informs that no software is detected...
Heeeeeeeeeeeeeelp, please
Hello navinesnej
Looks like it could be a fatal mistake to MSI. Please, try the procedure described in the article below.
-
Error 1310 can not install the software
I can't reinstall Adobe Pro 9 on Windows Vista Ultimate 32. I get error 1310. Write to file:C:\Config Msi/991a42.rbf. Make sure you have access
in this directoryhttp://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads
They will help you with your question to Adobe in the Forum Vista programs at the above address.
See you soon. Mick Murphy - Microsoft partner
Maybe you are looking for
-
USB devices not seen on Satellite Pro A60
Hello I'm having a problem with my laptop Satellite Pro A60 running Windows XP Home: it is simply not to see all devices at all. Devices (USB, fan keys) are to be supplied with electricity, but I can find no trace of them on the computer anywhere. It
-
Printer udskriver justeringsside sealing gang printeren will accompany, inden PCeren will accompany. How can stop denne fejlstart?
-
updates for ms office 2007 student do not settle
updates for ms office 2007 student do not install, error code 646. Vista is the operating system.
-
Upgrade of RAM for Pavilion g6-2006sq
Hello I recently bought a Pavilion g6-2006sq and I want to upgade the RAM. I want to know what type of ram can I use. What is the maximum size and how fast. I want to install 4 GB kingston value ram 204 1333 mhz part product PIN KVR1333D3S9/4 G and w
-
After that I deleted a playlist, they still appear on my Fuze
The "rocket" is in MSC mode, I use .m3u playlists and playlists that I deleted (am entered and removed the .m3u file) are always shown as empty playlists on my screen of playlist on the "rocket". is it possible to fix this?