BlackBerry smartphones exceeding the limit of characters while sms SMS?

Similar Questions

• BlackBerry smartphones increase the length of characters in SMS Messages

  I have the 8830 curve and am limited to 160 characters when sending a SMS.  Is there a way to increase that amount or do it in a second SMS auto debit?

  Hi and welcome to the forums!

  160 is as good as it gets!

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB15293&sliceId=SAL_Pub...

  Thank you

  Don't forget to adjust your thread. Put the check mark in the green box containing your answer! Thank you

• BlackBerry smartphones change the alert tone when receiving SMS

  How can I change the alert ring tone when I receive a text message? I can change my ringtones for calls, but does not know where he change of text

  Never mind. just found

• Content of the Message of Smartphones blackBerry exceeds the limit

  I got an error message: the content of the Message exceeds the limit while trying to send a 2 MB video by mms.  What I am doing wrong?  I sent before and they went thrus.  HELP Please!

  Hi and welcome to the Forums!

  Given that the MMS is a service of voice at the level of your supplier, you must contact them for assistance.

  Good luck and let us know!

• #5.3.4 size of message header exceeds the limit

  Hello!

  We get this our customers bounce error message when trying to send emails to our newly built Ironport C370 box.

  Here is the error message;

  «The following message to [email protected] / * / was released.»

  The reason for the problem:

  "5.3.0 - another problem mail system 552 - '#5.3.4 message header size exceeds the limit.

  Hope is that delivery status Notification will help to identify what is talking about the problem.

  Appreciate your kind reply on how to solve this problem.

  Best regards

  Ruveni

  Hi Ruveni,

  Please see our following article knowledge base that explains this error and provide the solution for it.

  Message bounces back with "552 message #5.3.4 size header exceeds the limit.

  http://tinyurl.com/2yw579

  I hope this helps!

  Kind regards

  Félicien

  Customer Support Engineer

• 907 invalid cod exceeded the limit of the number of OS 5 bytes

  Hello

  I do face-down issue with jad installation from a Web server. I put all my files of cod with a jad file in our weserver. and appealed to the jad file. After a few seconds, the message as below. The same thing works with phone OS 6 version, but not with the OS 5

  907 invalid cod exceeded the limit of the number of bytes

  Thank you

  RAM

  If you are testing on simulators on the same PC running the same MDS Simulator, the article on connection limits may apply.

  Sorry beat me to it, I've never had the OS 5.0 browser throw up his hands on a download I created it, that the OS 6.0 browser was fine with.  The size of your files is not huge.

  If you really want to count the MDS Simulator out run, start the WiFi on the 5.0 OS simulator (manage connections--> set up the Wi - Fi network, you follow the nose, and then start the WiFi on the device), then change the configuration of the default browser (--> Advanced--> browser Options) in the Hotspot browser.  Stop the MDS Simulator and see if you can still browse.  Then, try the download again.

• Bugs blackBerry smartphones? the 9810 torch?

  Hello

  I've been playing with my new torch 9810 and now the battery seems to be draining like crazy (up to 10% after having just three hours hanging out, not a single call done) - and some programs play AND I get a message indicating that the camera photo and video camera are in use although I'm not using the.

  Is there a virus on this thingy? -How do I know? has someone hijacked my camera to spy on me?

  a little paranoid, hoping for help!

  Thank you

  Hello and welcome to the community!

  I recommend that you try to start safe mode:

  • KB17877 How to start a smartphone BlackBerry in Mode safe

  It will take several attempts to get the combination of keys ESC (press/release/hold) OK, so be patient. When properly in Safe Mode, see what happens.

  If the behavior continues, then well... think what happened just before this behavior started? A new application? An update? A theme? Something else? Think carefully that the slightest change can be causal... and try to undo all that was.

  But if the behavior continues mode without failure, you may need to consider more drastic measures - WIPE, OS Reload, BBSAK Wipe/Reload and the process of reloading OS 'skeleton '. To prepare, you should be sure that you have a full backup of your PC... Please see the Backup link in my sig auto on this post for instructions.

  You may also use these tips:

  • KB10144 How to force detect the BlackBerry smartphone using the Application Loader
  • KB27956 How to recover a BlackBerry smartphone from any State
  • http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry

  Good luck and let us know!

• If my word document is Ko 106480 how can I convert it into a PDF file if it exceeds the limit of 100 MB

  If my word document is 106 480 Ko how can I convert it into a PDF file if it exceeds the limit of 100 MB

  Get Acrobat and you won't have these limitations.

• Immediate change in the limit of characters of the text field?

  I have a PDF form that I try to do more foolproof. When a user enters his credit card number, I want to check the first two numbers to see which kind of card it is (Visa/MasterCard/American Express) and select the radio suitable for them, as well as limit the number of digits that can be entered in the credit card number field. I found it for the most part, but it seems that change the limit of characters (charLimit) in the card number field is not actually take place until focus leaves the field, then comes. Here is the code I have so far, in the property Custom hits Script on the tab Format for this field:

  event.rc = /^\d*$/.test(event.change);
  
  
  var thisField = event.target;
  var amexTest = /^3[47]/;
  var mcTest = /^5[1-5]/;
  var visaTest = /^4/;
  var firstTwo = event.value.slice(0,2);
  var ccButtons = getField("Credit Card Buttons");
  if (amexTest.test(firstTwo)) {
      thisField.charLimit = 15;
      ccButtons.value = "AMEX";
  } else if (mcTest.test(firstTwo)) {
      thisField.charLimit = 16;
      ccButtons.value = "Master Card";
  } else if (visaTest.test(firstTwo)) {
      thisField.charLimit = 19;
      ccButtons.value = "Visa";
  }
  

  It seems that my code pasted a bit cut off near the end for a reason, but I think that it is enough to show what I want to happen. Because this script is executed at every keystroke, and then after the first two characters are typed, I want to limit the number of characters for what is appropriate for this type of card. This should help a little to what people mistyped their number. However, as I said, the change isn't actually place until focus leaves and enters this area.

  What can I do to make the immediate change?

  I don't think that you can not do it like that, but you don't need to. As you are already using a script of the event in the sequence of keys, you can check the length of the text and then reject the strikes if it is too long.

• 4012 [1211140]: exceeded the limit for connection cache - how can I solve this problem

  "" "QUOTE-2016-11-18 09:40:48.680000 UTC - 4012 [1211140]: exceeded the limit for connection cache: imap://[email protected]@imap/ writes" rel="nofollow">-mail.outlook.com:993/select>/Drafts 09:40:48.680000 2016-11-18 UTC - 4012 [1211140]: queues url: imap://[email protected]@imap/ writes "rel="nofollow">-mail.outlook.com:993/select>/Drafts 2016-11-18 09:40:48.680000 UTC - 4012 [1211140]: seen play queue url: imap://[email protected]@imap/ writes" rel="nofollow">-mail.outlook.com:993/select>/Drafts 2016-11-18 09:40:48.680000 UTC - 4012 [1211140] ': creating instance of Protocol to play queue url: imap://[email protected]@imap/ writes "rel="nofollow">-mail.outlook.com:993/select>/Drafts 09:40:48.680000 2016-11-18 UTC - 4012 [1211140]: proposed url = drafts folder for connection has to wait = FALSE can run = FALSE-EXTRACT

  Excerpt from log file showing the problem.

  Have been using a Hotmail account by using IMAP on Thunderbird for a long time without problem. Then BANG. 02:00 and it refuses to work. TB message is 'server xxxx offline. The server may be down or there may be a network problem. »

  Problem with google, a lot of people seems to have. Usually involves the connection cache limit. Located on logging - you can see the result above. Connection cache limit. Set it to 1. No help.

  Contact Microsoft technical support. They were absolutely * no need, just make the assumption that the error lies between the keyboard and the Chair. They had me remove the Treasury Board account and recreate it. Which it won't, as it bangs against the connection cache limit. They say Thunderbird problem and refuse to help more. Help, please.

  Issue can be closed.

• Player error: there was an error opening this document.  The size of the file exceeds the limit...

  The total error is: there was an error opening this document.  The size of the file exceeds the limit and cannot be saved.

  

  I don't think that player had a size limit?  The file is only a few hundred MB.

  Does anyone have an idea what could be causing this error?

  -Richard.

  Is it a document online or local?

  If online, see http://answers.microsoft.com/en-us/windows/forum/windows_xp-hardware/error-0x800700df-the-file-size-exceeds-the-limit/d208bba6-920c-4639-bd45-f345f462934f

• BlackBerry Smartphones why don't my characters the show SMSing left?

  I have the 9900 and I don't get free texts, so I need to know the number of characters I have left.

  All phones tend to show it.

  Is this a setting turned off?

  I answered my own question.

  Found here:

  Link to Crackberry

  It shows that you have only 15 characters left... and the countdown, you get to that.  But until you do, it does not show... keeping the own screen.

• Switching devices blackBerry Smartphones using the Desktop Manager

  I just got my Torch 9800 replacement since my first only the battery was drainning (apparently a common problem).

  Until I returned my old Torch 9800 I backed up and also used the device switch option in Desktop Manager. When it asked me to connect the new device, I unplugged the old camera, he took to the shop orange and then plugged my new camera.

  Then an error has occurred and asked me to update the software on the new device. I did it... and then when I use switching devices, it asks me to connect the current device but the problem is... I don't have the camera more.

  As I backed up all the data, I did a restore. He restored most of the data, but it has not restored my apps.

  Any idea on how I can do?

  I hope it is interesting all that.... and I get a better battery life this time!

  Hi and welcome to the Forums!

  Ah... never mind. While the device switch Wizard can indeed move a few apps, the backup/restore process does not have applications. So, in the State you are in, you must go to the source of your applications and re - get them. If you by AppWorld, the process is very smooth:

  • KB17625 How to install or transfer has already purchased apps from BlackBerry App World for BlackBerry smartphone

  If you have from other sources, then you should see if these sources are a simple way for you. I hope you have good record of all your activation keys... and some will indeed have to be regenerated some developers to attach the key on the BB SPINDLE, which is now different since you have a new device.

  Good luck!

• Errors of blackBerry Smartphones My World ' year error occurred while updating your application list.

  Whenever I select my world of the web page, I'm prompted for my blackberry id username and password, if I get the right user name and the password that it continues to ask me for my credentials, everywhere else looks that I am enrolled in fine with my code. On my Blackberry, I get the error "year error occurred while updating your application list" when I opened my world. I contacted Rogers for support and they told me that I have to contact Blackberry

  Edit: I already tried ALT RST. And I tried different phones as well. Using a different ID for Blackberry works fine.

  Rogers took a week to move to the Blackberry on that. It was a bug in version 3 of App world that they felt was set at 4, I am now the 2nd person to report in the last two weeks.

  Basically, I've had too many blackberries and too many applications in my App World and the list is time when pulled.

  So his way for BB to developers to get fixed.

• BlackBerry smartphones enter the username associated with this smartphone

  When I login with my ID blackberry an apper message telling to enter the user name associated with this smartphone

  Please help me

  In fact, it is not likely to help... to refer:

  • KB28429 "Please enter the username associated with this smartphone" appears by connecting to BlackBerry App World with a BlackBerry ID using a smartphone BlackBerry 7

  To paraphrase, what this means is that there is already a BB ID associated with this BB, and there is only one way to change the association ID BB to BB:

  • KB26694 How to change the BlackBerry ID on a BlackBerry smartphone or BlackBerry PlayBook Tablet

  Whereas a WIPE seems drastic, it is nevertheless the only way to change the ID of BB BB is associated.

  Good luck!