BlackBerry smartphones, I have a flashing red light and phone does not illuminate

Similar Questions

• Device flashing red lights r200 printer does not

  flashing red lights the printer does not

  The flashing lights are no doubt an error message from the printer for you.  See the manual supplied with the printer or the web site of the manufacturer of the printer - model support and the type of lights flashing almost certainly have a specific meaning which will clear once you know what it means.

• BlackBerry smartphones after 3 days my flashlight died - red light shows but does not illuminate.

  I got my flame long enough to set up my e-mail account and run the battery down (about 3 days). I put the phone to charge for the second time and were not able to next turn to the since then.

  I use AT & T and have the Torch 9850.

  I received Dec 25 and not really turn on or start together until Dec 28 and used 28 Dec - Dec 30 when he ran down on battery and close.  I've loaded and charged and charged and I see the red light at the top right, but nothing happens. New years BB Bold 2012 ads just rubbed salt into my new year!

  Any suggestions on how to get this restart or do I have a lemon for Christmas?

  1. remove the battery

  2 - Set your phone on the charger with the battery removed

  3 reinsert the battery

  bottom white-4 with a clock as the picture shows (not a problem)... after a while, that he will be gone and you can reuse your blackberry

  5 - let it get completely reloaded

  hope that it works because my friend had the same problem after that the battery has been completely drained!

• Smartphones blackBerry 8320 death with a flashing red light

  I had my 8320 for 5 months now... everything was fine until today.  I got a white screen with a hourglass... so I removed the battery and put it again after 30 seconds.  Then 'bam' nothing... no screen at all... just a flashing red light.  I came home and plugged in the charger, thinking that would solve it. Maybe the battery was dead, but he charged for six hours and then I got a green light, but no screen.  Help!

  Hi and welcome to the forums!

  If you have only had the phone for 5 months, you should be able to take back and get a new phone.

  I hope you made a backup and you can restore your data. If you are unable to return it, you will need to reload the operating system of the device.

  In my opinion if it can you should resume.

  You want to try to return or to load the operating system?

  Please let me know.

  Thank you

• Pavillion G7 1263-nr: HP Pavillion G7 led beside the power supply plug flashes 3 times... does not illuminate?

  Unit does not illuminate. When the Start button / stop is pressed with power cord only or with the battery and the power cord or battery only I get 3 flashes of the white LED on the side of the unit next to the power supply.

  I replaced the receiver taken power in the change of unit No.....

  I used an other (workin) power cord and adapter... no change.

  I tried another battery (work)... no change.

  I pulled the two memory chips don't... no change.

  I put the two don't chip memory in one at a time... no change!

  I'm out of solutions short of replacement motherboard which is not profitable unless I want to take a chance on a reduced opportunity to the Board of Directors.

  Only the indication of all this work are three white flashes of LED is located just next to which DC adapter/cable plugs?

  Any other suggestions/diagnosis would be appreciated.

  Thank you!

  I had to contact HP and according to them the power port led flashes 3 times after pressing the power on button, indicates a failure of the motherboard and requires a replacement.

• I have re-downloaded 7 elements and it does not accept my serial number

  I have re-downloaded 7 items and it will not accept my serial number so I'm forced to use the free trial of 30 days which expires

  Regular license http://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html

• BlackBerry smartphones which is the flashing green light?

  In addition to drive me crazy, of course. I know when it is red, I have a message, but it has been flashing all night and I had to cover only to find this morning, he's still alive! What to say? How do I turn it off?

  I think that he is here to tell you that you are in the coverage of the network.

  You can disable it by going to Options, screen/keyboard and the value ' coverage seeing: "to 'Off'.

  See you soon

  Steve

• trying to turn on my HP compaq d330 but red light flashes and a beep and nothing does not illuminate

  trying to turn on my HP compaq d330 but red light flashes and a beep and nothing comes up on help a beginner please

  You can try to remove and replace the memory and see if it works.

  If this does not work, delete all except one module of memory (if the PC has more than one) and see if the PC works normally with the chip memory. If it beeps, remove and replace it with the memory you removed and keep doing that until you find the defective memory chip.

• BlackBerry smartphones I have app world downloaded on my phone. Do I need you...

  I have app world downloaded on my phone. What I need to be updated from time to time, or is happening to me?

  Hello!

  AppWorld not, my knowledbe, auto-updated. But RIM has released version 1.1.0.15 AppWorld... it is highly recommended to be on this version.

  If you need help, then come back on these forums (http://supportforums.blackberry.com/rim/) and create an account so that we can provide direct assistance.

  See you soon!

• I have a desktop hp pavalion and it does not start

  Hello everyone my name is Damuto123456 and I have a hp pavilion Tower, and for some reason, it won't work. When I press the power lights on the tower it itself lights but nothing will load. also this morning, I came to see that it was on the system repair mode because it was able to start. later in the day I had returned to check on the PC and there was a blue screen or as many of you know a BSOD blue screen of death, and he was stuck on this subject if I stop the PC. After that I started it upward and the only thing that would go out of the lights and the fan would run like crazy.  and the worst was that it would not even go through the steps of a computer startup. and my OS is windows 7 so could someone please help me I have very important data on this computer. the model is hp pavilion elite m9715f PC with processor AMD phenom X 4 9650, 8 GB of system memory, HDD 750 GB, blue-ray and recorder player super multi DVD, an ATI Radeon HD 4350, w - lan, built in tv tuner, a 15-1, a hp pocket media drive Bay card reader, an easy backup button hp and a personal media drive hp bay are the elements of the pc

  Davide muto

  It was 3 months since my computer broke down and I did everything you guys said, but in my conclusion that the motherboard computers died, so I plan on a new computer and plug in the hard drive and I will spare all the good parts that I can use and perhaps add to my new computer so thanks for your help guys. Cordially Damuto123456

• BlackBerry smartphones, I have no document to go and I have just updated to OS 4.5

  Hello!!!

  I just updated my OS and I don't have the documents to go application, can I download it or what I can do to get this application?

  Thank you!!!

  Alex

  Thanks for the input, I solved this problem by installing doc. go to Office Manager in Add/Remove from the application center

  Thank you very much!

• I have a router Linksys WRT54G, a flashing power LED, and it does not connect what either. I downloaded a bin file from Linksys, but cannot open it. Can anyone help? I try to get another computer running for my children. Thank you

  The router will not connect to my computer. He repeats to me check the connections. They' fine rev.

  Hi Tweetytewe,

  This occurs on cable connections and wireless? If this happens on cable connections and wireless and your Windows installations are fine, you should contact linksys support to receive the best support.

  http://www.linksysbycisco.com/US/en/support.

  I hope this helps. Let us know if you have any questions.

  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Screen of the blackBerry Smartphone is no longer automatically stop when the phone is not used

  I have a Verizon 8830.  I have the side switch programmed to lock the device.  In the past, when I blocked the device, the screen would turn off after 2 seconds, which would save battery.  Now, when I lock it, the display turns off after two seconds but then it turns back on.

  I can get it to decrease intensity with backlight settings, but I can't have to go completely dark.  As far as I know, I have not changed any settings.

  Any ideas?

  It fixed the old-fashioned way... I did a hard reset.  It works again.

• Some of my videos blackBerry smartphones can be sent by e-mail and some may not

  I have the email or MMS option some of my videos but others the only option I have is to send via bluetooth.  Why is this?

  And the size is the same thing?

  Because the size limit is about 3 MB

• BlackBerry Smartphones Desktop Manager 4.7 for BB "BOLD" - Roxio does not recognize the SD Media

  I use the latest (version 4.7) Desktop Manager but Roxio will not recognize the SD card inserted in the phone.

  I tried (2) Micro SD cards with data on them both.

  The phone recognizes both cards and I can access the files via telephone.

  I forgot one option in Roxio?

  Hi and welcome to the forums!

  Please tell us what type of PC OS you use. (Windows 2000, XP, Vista)

  See if you can access the support card without using Desktop Manager.

  Fix the USB on the BB and the PC. Do not use the Desktop Manager.

  Go to 'My Computer' on the PC and the BB will be displayed as a flash drive.
  Then you can "drag and drop" files on the BB.
  Use the following settings in the option of "BOLD":

  Card support ON

  NONE encryption mode

  (Storm AND "BOLD" only) Media Transfer Protocol

  WE support mass storage

  Auto enable mass storage support when it is connected TO
  Thank you

  Bifocals