Hot Fix #972485

Similar Questions

• Must the updates and hot fixs remain on the hard drive after having been loaded? Is the information provided in the operating system?

  Must the updates and hot fixs remain on the hard drive after having been loaded?  Is the information provided in the operating system? Or do the lonely stand.

  Original title: need for disk space

  Here are the official specifications of Toshiba for your PC...

  http://support.Toshiba.com/support/staticContentDetail?ContentId=638405&isFromTOCLink=false

  All interface PATA (IDE) connectors are a standard 40 pin.

  I know that there is no restriction on the mixture of ATA drives with different speed capabilities and no restrictions on what cable you use, whether 40 wire or 80 strand (but still 40 pins).

  Faster drives will only work at the speed of the slowest car on any cable and 80 strand cables are needed to make ATA66 or higher drives run at their native speed.

  In addition, no player can work faster than the motherboard chipset permits, in your case ATA66.

  My provider of trade has still some disks 3.5 '' PATA in stock, but these are becoming harder and harder to find. Indeed, it is possible that production has ceased and that suppliers are just exhausted stocks.

  I can certainly say that, when repairs this technology were more frequent, I never had problems with discs theoretically faster on the same cable as slower drives, nor by using faster on 40 cable strands discs. In fact, of many penny pinching manufacturers (some of them major) regularly used for the optical drive and hard drive on the same cable as the motherboard has two connectors, resulting in a decrease in performance on the disk hard (although most of the people would not have noticed the difference). Sometimes, the cable would be 40 strand (understandable if you are penny pinching) and sometimes the cable would be 80 strand (laughable if you are penny pinching because they are [were] more expensive).

  Pass your question about vacant below the sound card. Unless your text confused me, this space is for expansion cards no disk drives. Space that you reference is probably to the back of the PC. Hard drives are normally located toward the front of the dedicated PC "berries". Unfortunately, I could find no photo on the Toshiba site, and still less those internal.

  Tricky

• MX7 Hot Fix?

  I have installed MX7.02 and see that there are some updates.

  If I download the file form will of ColdFusion MX 7.02 Cumulative Hot Fix 3 who catch me up-to-date on all patches?

  http://kb2.Adobe.com/CPS/402/kb402465.html

  Sorry, but this is not necessarily true (I refer to the answer, 'true', the question of csgaraglino, ' if I download the file from ColdFusion MX 7.02 Update Rollup 3, will that catch me up-to-date on all patches? ")

  No offense means for Adam, that I realize that it is easy to assume that the answer is 'true', but there is more to this question than meets the eye. Given their name, 'rollup', it is reasonable to assume that the last one has always includes all fixes from the previous.

  But in fact, sometimes the ones you want to 'jump' may have had some manual steps (additional files in the downloaded zip file that must be treated, or individual additional patches listed at the top or bottom of the TechNote for the CHF). There are examples of such manual steps in a more in CF 9.0.1, CF 7.0.2 and CF 8.0.1 CHFs.

  I had intended to write a blog entry extended to respond to this question/problem/source of confusion, and this question made me today to go ahead and post:

  http://www.carehart.org/blog/client/index.cfm/2010/12/12/cfmyths_cumulative_hotfixes

  So csgaraglino, are you referring to jump from the 7.0.2 CHF 2 to CHF 3? In this case, then of course, also a long time you did the manual comes in 7.0.2 CHF 2, you can just ask 3 CHF (but don't forget to note that it also has its own additional manual steps.) But if you're ignorant of 7.0.2 basis of CHF 3, then you need to apply the manual of CHF 1 and CHF 2 procedure - and as I explain in my blog entry, there is a SIGNIFICANCE VITALE manual fix listed in 7.0.2 CHF 2 you almost everyone should apply, to avoid a common source of leaks memory (real).

  To conclude, this concern to 'jump' previous CHFs is in fact a problem with almost every version of CF (and most CHFs). Again, see the developed ticket for more details (much more).

  /Charlie arehart

  [email protected]

  Providing CF and CFBuilder troubleshooting services

  at http://www.carehart.org/consulting

• How to apply a Hot Fix chf8010002

  Instructions for the Cumulative Hot Fix 2 for ColdFusion 8.0.1 (chf8010002) say so to use the Browse button in the coldfusion administrator system information screen.  This RDS be turned on but none of our production servers that have.  I can't find the instructions for the installation manually this fix, anyone know how?  Archive real has only a .jar, no readme file.  Thanks for any help.

  ... Brad

  stop the CF server service, copy the jar to your equivalent of c:\JRun4\servers\cfusion\cfusion-ear\cfusion-war\WEB-INF\cfusion\lib\updates re - start the server in CF service.

• VIsta Home Premium SP2 Hot Fix KB947821 - not install, up to 80% and then freeze it

  Hello

  I hope someone can help me?

  I ran Microsoft Fix it update after having problems with my PC Acer Aspire T671 - SB7Z and got a report a windows update error ref

  0 x 80070057 (+ date and time).  Found that this could be solved by installing KB947821 hot of difficulty.  I tried to install, happened at about 80% and then frozen.

  Struggling to figure out what to do next to resolve this problem.

  Welcome the thoughts and ideas.

  R

  Microsoft recommends an update to 947821, try to download the

  Update on your desktop, then open it. Here is the link...

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

• Security application problem hot fix wsconfig.jar

  Hello
  I am running CF 7 version 7,0,2,142559 and tried to apply a fix to URL:
  
  http://www.Adobe.com/support/security/bulletins/APSB07-02.html
  
  I have saved the old wsconfig.jar file and have uploaded a new. I've renamed the new wsconfig.jar file and copied over the old (this is not mentioned in the instructions, but it seems logical to do). I started cmd and cd C:\CFusionMX7\runtime\lib\ folder and I entered the command:
  
  Java - java - Dtrace.ci = 1 - jar wsconfig.jar - upgrade - v
  
  I have an error message:
  
  'java' is not recognized as internal or external command operatable program or batch file
  
  Event if I try to check the version of the old wsconfig.jar file I have the same error message.
  Just to mention that my CFIDE folder is on the other drive (D) where my website is running from.
  
  What I am doing wrong?
  
  Thank you
  b.
  

  Hi Adrien,.
  See this post:
  http://www.Adobe.com/cfusion/webforums/Forum/MessageView.cfm?forumid=1&CATID=143&ThreadId= 1232155 & highlight_key = y & keyword1 = wsconfig % 2Ejar

  I fixed it!
  First of all, I've added to the variable path path of real access to the java.exe but no luck with the fix.
  Simply put, I copied the java.exe file in the same folder as wsconfig.jar and have run the command successfully! Be sure to rename the downloaded jar file and copy it to the former. Ignore the little jar file decompression in the post above (link).
  Good luck.
  b.

• HOT FIX 204655 HAD NO PASSWORD, BUT REFUSES TO OPEN WITHOUT ONE.

  Lost the all PROGRAMS list on the start menu.  Orderly hotfix.  E-mail came with blank password (i.e. extraction without password) - but it won't work without the non-existent password.

  Hello

  · This 941248 patch are you referring?

  See: how and when to contact Microsoft and Support Customer Service: http://support.microsoft.com/kb/295539

• I ran Hot Fix. Now most of my options in the Panel disappeared

  I have Vista Home Edition - 64-bit with SP2

  The only Control Panel options I have are Java, NVIDIA of Mail, QuickTime. All the Vista ones disappeared. He saw Calassic on the left. Nothing happens when I click it.

  Hi TrevorMars,

  ·         Are what patch you referring?

  I suggest you to check and clean the boot if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  I hope this helps.

• FIXIT GETS 16977921-2147023836 ERROR CODE

  After I recovered my system, I spent the last month download stuff against MS.  In desperation, I tried the FIXIT.
  It gets the error code: 16977921-2147023836 and help it.

  I can't most install .NET FRAMEWORK 2.0 and its SP 1 thereto.  The last attempt was an error: '.. '. could not connect to the database... "It was fun because my other mistakes were more like"... software does not correspond to the correct level... ". "or something like that.  Trying to get the levels of software to match, I installed a gazillion iterations of F.. NET here's what's on my system poor and tired:

  MS XP Media Center Edition (it gets errors all the time and I would delete it, if I were brave or more stupid that I am).
  Version 2002
  Service Pack 3

  THAT IS TO SAY 8.

  .NET framework:
  1.0 hot Fix
  1.0 (KB2742607) security update
  1.0 (KB2833951) security update
  1.1
  Customer profile 4
  4 scope (KB2487367 and KB2656351)
  Pack 4 mult-target

  When it comes to Media Center that gets consistently errors:
  MC, 2005 edition
  Rollup MC (KB873369)
  MC 2005 (KB888316)

  IN SUMMARY:
  My goal is to get the crazy 'a security update for Windows XP (KB973768) before I become.  All these other facilities were in a floundering trying to heal
  This failure.
  I hope that there is enough detail to give a clue as to where the bat to someone hurt.
  Thank you for any assistance you can provide.

  Roger,

  If you have installed .NET 3.5, then you already have the layers of version 2.0 and 3.0 since 3.5 is based on previous versions. It just adds new features each time.

• fix 157708

  I have service pack 2 for windows xp 64-bit, there is a problem with the code of the interface of the service pack 2 causes installthat the CPU to go to 100% hot fix 157708 is supposed to fix but onle with service pack 3... MS supports is supposed to get the fix for service pack 2, but I can't communicate with them.

  Thank you

  Hello 1red1,

  1. don't get us the good patch number.

  2. what exactly is the problem?

  Unfortunately, support for SP2 stopped.

  I suggest you try to install SP3, then check:

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717

  To download:

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=5b33b5a8-5e76-401F-BE08-1e1555d4f3d4&displaylang=en

  Kind regards

  Savan Microsoft technical support.

• Captivate 9.0.1.320 should he the Captivate 9.0.0.223 fix?

  I recently installed the 9.0.1.320 Captivate after getting a new laptop.

  I have Captivate 9.0.0.223 on my old laptop with this fix: Hot fix for Adobe Captivate 9 questions

  I still have to do this fix for Captivate 9.0.1.320 or the hotfix is already installed in this updated version?

  Hot fix is incorporated in the patch.

• Cannot install the ColdFusion Builder 2 fix

  I'm trying to install ColdFusion Builder 2 Hot Fix. At the launch of the InstallAnywhere program I get this message: cannot run the desired program. Please get another copy of the installer and try again. "Does anyone have a solution?

  Can you please rename the following Setup program, and then try to install?

  Adobe ColdFusion Builder 2 fix 1.exe

  Thank you

  Krishna

• Satellite M70-148 - power on problem after hibernation

  Hello:
  Sometimes, I have a problem I can not turn on after hibernation. The fan starts, but the computer does not start again. I can only turn off again by pressing the button for a few seconds. When I remove my power cord and press the power button, I am able to start up. I can solve this?

  I've been on the internet looking for a solution and found this description of the problem, which is exactly what I have, but unfortunately there is no solution.

  "
  I'll explain the problem in detail, right after hibernation or standby IF you press power button / stop it goes blue led fan starts, HD led lights, led battery, power adapter led (if its connected) and a cd player make it sound as if he looking for a CD, and THEN stopped fan HD led turns off, no sound from CD, leaves u with button only works / stop led on, a pretty frustrating blue

  After waiting, u eventually gave up, turn it off by prolonged pressure on the button / stop and then no matter wut u do, simply starts only even the sounds and the leds as mentioned above, nothing on the screen as if its dead! No logo, no nothing.

  Give him a time (about 15 min with battery connected, or 5 minutes or less with the battery) press the button, IT U - GO, works perfectly!

  same case with the judgment but not always as put into hibernation and sleep (but once made wake-up from standby mode!), but most of the time after the judgment, you have to wait 15 min!

  No memory connected USB flash or something else!

  I have installed winXP pro SP2 above and installed the drivers and the Microsoft HOT fixes too, but the problem remains.

  I also made recovery from the CD of restoration which follows, also not good!

  I noticed that if you disconnected the battery the appliance needs less time to wake or boot. about 5 min.

  what kills me, is that the device works perfectly and I love it! I've had this problem with her!

  So what I need to know is the following: is there anyway to weather course if it's a hardware or software problem?

  its not easy to go to service local cuz its in another city! I need to try first what it takes to fix it on my own!
  "

  Thank you for your time!

  Well, there's not much to do. You have some many possibilities. Check your installed BIOS version and compare it with the version on the Toshiba site.
  If there is a newer version so you can try to update the BIOS. But please be careful.

• Stack of BT 5.10.02 running on Windows 2000

  Hello

  I am facing some problems with the battery of Toshiba Bluetooth on Windows 2000 Service Pack 4 to the hands-free function.

  Version of BT stack that I use is 5.10.02.

  It takes at least 2-3 attempts to match or headphones.
  Restarting the machine on the headset is disconnected, it conforms.
  A few times the BT manager stops responding when matching.

  Is it any patch to fix this problem?

  I tried to install the hot - fix Q818801, but it has not solved the problem.

  Hello

  can I ask you which machine should you? Is this pile of BT that you´ve downloaded especially for Windows 2000?

  It would be interesting since BT under Win2000 stuff is such a question...

  Please, give more information about your computer, configuration, etc. + the exact helmet device which you want to connect to your machine.

  THX

• Satellite A40 - 10 - D drive: for code error is not found

  HELP PLEASE!

  I really need help to fix errors on my system.
  A few moments ago I accidentally deleted the DVD player + / optics to my laptop, and when I go to my computer, it's not here?
  The sys. tells me that the D: drive is not found, and the disc has been removed without preparation and cannot be found, error code 10.

  What this means, as I tried to update the BIOS and it didn't need, and I can't find a driver for the A40 Satellite from Toshiba.
  In addition, drivers seem to be ok and the boxes are checked in the device management, even if the optical drive has sometimes a yellow exclamation?
  Tried the recovery disc and no luck.
  Also the drive does not work now, because it does not read discs!

  Here is the Spec for the computer, as well as the summary for error messages. Reallr wouild appreciate any help on this please...

  My computer science - general

  Please wait while the information gathered...

  100% (collecting Local disk information)

  Refreshing the screen
  Specifications
  TOSHIBA
  System model: Satellite A40
  BIOS version: TOSHIBA Version 1.50

  Operating system
  Microsoft Windows XP Home Edition
  Version: 5.1.2600
  Service Pack: 1.0
  Location: C:\WINDOWS
  PID: 55277-OEM-0011903-00111
  Hot Fix: Q817606

  (Vivid RAM) memory
  Capacity: 2 GB

  Here is a list of the Dr. watson error reports that appeared the donation system.

  January 25, 2009 Service Control Manager the Application Management service terminated with the following error: the specified module could not be found.

  January 25, 2009 atapi the device, \Device\Ide\IdePort1, did not in the expiration time.

  January 25, 2009 Cdrom driver detected a controller error on.
  January 25, 2009 atapi the device, \Device\Ide\IdePort1, did not in the expiration time.
  January 25, 2009 Service Control Manager boot start or system start (s) what follows could not load: Cdrom
  January 25, 2009 PlugPlayMa swim the device ' S I t A D D - M R - 6! 1 '' ' (IDE\CdRomT_S_I_A_D_D-R_M_S_-_ 6! 1 '___1 #3' 423362730283321372620202020202 020202020 ___\3) disappeared from the system without first be prepared for removal.

  January 31, 2009 Cdrom driver detected a controller error on.

  January 31, 2009 Service Control Manager boot start or system start (s) what follows could not load: Cdrom

  January 24, 2009 Applicatio n error Faulting application helpctr.exe, version 5.1.2600.1106 failing module kernel32.dll, version 5.1.2600.1106, fault address 0x0001a67a.

  January 25, 2009 MsiInstall product Re: ParetoLogic DriverCure - 1722.There error is a problem with this Windows Installer package. A program run as part of the Setup did not finish as expected. Contact your provider to support personal or package. Action DeleteScheduledTask, location: C:\Program Files\ParetoLogic\DriverCure\D riverCure.exe, command:-deletetask

  January 25, 2009 Applicatio n Hang Hanging application switch.exe, version 0.0.0.0, hang module hungapp, version 0.0.0.0, hang address 0x00000000.

  Hello

  Akuma is right. I tried to find Microsoft document about this, but somehow the old links no longer work.
  In any case, after removing the Upperfilters and Lowerfilters optical drive should be recognized correctly again and you can use it again.