BlackBerry smartphones no internet or mms by using fertilizers don't talk with my blackberry.

Similar Questions

• Internet problems: can't use it in safe mode with networking

  original title: Internet problems

  My computer connect to internet wireless whenever I turn on my laptop; However, I still can't access internet. I have to go to safe mode with networking to get internet. What can I do? My Xbox is connected to the internet with no problems at all.

  Hi Aaron,

  What antivirus do you use? Since you are able to connect mode without failure, it leads me to believe that this is caused by a program that you run which restricts navigation. Try to disable all antivirus software and try to get online.

  Just note that it's always a good idea to always have an antivirus running. But not more than one at a time can cause problems.

  I hope this helps.

• Settings MMS for blackBerry Smartphones and Internet for 9700

  Can anyone help with MMS and Internet for Bold 9700 parameters on the network of Virgin Mobile Australia? I am able to browse internet through Opera mini using APN: VirginInternet but no luck with MMS? Solves them this problem or is it true that Virgin does not support Blackberry devices.

  Hello and welcome to the community!

  On BB, access to a range of services is enabled by the existence, on the device, the appropriate Service books. Service books are delivered to the appliance by the network of carriers... but, normally, only for these models of specific device that takes the network carriers supported and none support BB all models. If, as you think, your carrier supports no. BB models, then you can't expect their network to offer the Service books, which means that these services that require some SBs won't work, which includes MMS. But only they can answer the question of whether to their network supports the BBs at all and your specific model BB in particular number.

  Good luck!

• HP Pavilion 15 t issues with Internet connectivity can be used under Windows 8

  So I just got my new HP Pavilion 15 t-e000 CTO Notebook PC last week, it runs Windows 8 & amp; It is a 64-bit.
  
  The only problem I've had is to stay connected to my wireless Internet. The connection stops at random intervals saying 'Limited' instead of 'connected '. I have to constantly disconnect and connect to my WiFi. It's particularly frustrating when I am trying to download something that lasts longer than a few minutes because the Internet connection cuts, and I have to start the process.
  
  I tried pretty much every "difficulty" people have posted that worked for some people. No luck for me. Sometimes it seems that he will stay connected and then I try to connect to a web page or download something and it turns off again.
  
  -Turn off the "Allow computer to turn off this device to save power" under power management in the properties of my wireless connection section... DID NOT WORK
  
  -By using the command prompt to reset the network card... DID NOT WORK
  
  -Running the network and Internet, and convenience stores something... Didn't WORK * update: if I run the connection test network via the HP help/support on my desk Center, while the connection says Limited, I get the notice that the 'default gateway was not available"and the router has been handed over to zero and issue fixed, etc. BUT if I run the test, while the connected said wireless, the test still says there is no problem. And although the test 'fixed' the issue, it does not because the Internet always cut again.
  
  -Updates Windows has installed new updates several times... DID NOT WORK
  
  -Forget the wireless network and set up as a new... DID NOT WORK
  
  -With the help of my computer right next to my wireless router... DID NOT WORK
  
  Used wireless router is: Cisco Linksys Wireless-G 2.4 GHz router to wide band as well as our network is WPA with a security code. We also have an Internet DSL SpeedStream thing (sorry, I don't know what it's called). The Compatibility Center said that this router is compatible with Windows 8. Other computers running Windows 7 and Windows Vista, iPhones, iPads and all work fine.
  
  My laptop uses Intel Centrino Wireless - N 2230 and the light is on and it still says ' device working properly "in the properties.
  
  For any help or suggestion would be greatly appreciated because I am at my wits end.
  
  Thank you

  Therefore, it seems that my problem with the limited Internet connection has been resolved. I didn't use my computer for two days and this afternoon, when I turned it on I was still having problems. However, I went to the HP Support Assistant, and it appeared that I had a few updates to download and install, so I let him do his thing. It took awhile because the Internet kept cutting out, but once the update for the wireless Intel have finally set, my connection is REMAINING CONNECTED. Finally!

  I don't know why when I went into the properties wireless it says "device working properly ' and when I tried to update the driver it says"your driver is the latest version"or something else.

  I suggest you just go to the HP Support Assistant and updates in the section "Updates and the updates of". It was a bit random, but touch wood my looks of problem connecting wireless to be gone.

  Hope this helps

  P. S.

  Here is a screenshot of what the HP Support Assistant (this is the logo of big question mark) main screen looks like:

  

• How can I go on the internet from my PC using AppleTV computer?

  How can I go on the internet from my PC using Apple TV computer?

  You need to clarify your question.

  You cannot access your computer of the ATC but you can homeshare personal media from the PC on the ATV.

  The ATV does not have an Internet browser, that you access online content via apps designed and supported by the content owner.  However, you can AirPlay since an other iDevice on the ATV, or using third party software like air parrot on non Apple safari browse i.e. mirror the display on the ATV and iPhones...

• my internet radio stops every 10 to 15 minutes and I have to update it again and again. The same thing with my action also voip internet phone while iam using it

  my internet radio stops every 10 to 15 minutes and I have to update it again and again. The same thing with my action also voip internet phone while iam using it

  Hello
   
  (1) what version of Windows are you using?
  (2) remember to make changes to the computer before the question?
  (3) what browser do you use for Internet Radio?
  (4) what do you exactly mean by the loss of the webradio?
  (5) on which site you want to play the radio?

  (6) using WIndows Media Player to listen to Radio Online?
   
  See also a few following articles dealing on VoIP.
  Troubleshooting VoIP
  http://TechNet.Microsoft.com/en-us/library/ff849747.aspx
  How IP phones connect to the network
  http://TechNet.Microsoft.com/en-us/library/gg425740.aspx
   
  Get back to us with more information on the issue so that we can better help you to provide the resolution.

• my internet is slow I use a box of mifi varisen can someone tell me what to do to make it faster

  my internet is slow I use a box of mifi varisen can someone tell me what to do to make it faster

  Hello

  1. don't you make changes on the computer before the show?
  2. using Internet Explorer or another third party browser on the computer?
  3. have you installed Verizon software on your new machine?
  4. what operating system you are using on the computer?

  
  If you use Internet Explorer on the computer, then you can see the steps in the link and check.

  Why is my Internet connection so slow?
  

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

  Also check out the link for more information.
  How to increase the speed of navigation: 7 ways to work faster on slow connections
  http://www.Microsoft.com/atwork/remotely/connections.aspx

   

• Once I used internet I can't use any other program. I have to restart my computer to be able to use the computer again.

  I use internet often and everything works OK. After I log out, I can't use any other program in my computer, Google Earth, Microsoft Office, Microsoft Works, etc., the computer can not open any program. The only thing that works is the Start button, but no program works. Any suggestions will be greatly appreciated.

  Hello
   
  1. What is the error code displayed when programmes fail to open?
   
  2. What were the recent changes of hardware or software that are performed on the computer before the question?
   
  Please follow the links below to solve the problem.
   
  Method 1
  
  Start your computer in a clean boot and check for conflicts with third-party software.
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  
  http://support.Microsoft.com/kb/929135
   
  Note: please follow step 7 of the article mentioned above to start the computer normally, once completed the necessary troubleshooting.
   
  Method 2

  If you still encounter the same question please you start a computer in safe mode with network and check.

  
  

  Note: in case you have a wireless connection you will need to perform additional steps to connect to the in safe mode with network wireless internet.

  Start your computer in safe mode with network.

  
  

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Method 3

  Scan you computer for infections.

  Microsoft resources and advice for the removal of malicious software and viruses (Microsoft Security Scanner)
   
  http://support.Microsoft.com/kb/2671662

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
   
  I hope this helps.

• How the installation and from D-link DES-1024r program to the internet so I can use 2 PCs on the internet

  How the installation and from D-link DES-1024r program to the internet so I can use 2 PCs on the internet

  "Why can´t I share my Internet connection on multiple computers if you use my D-Link switch or hub?

  "If you connect directly to a cable or DSL modem, you will need a router to share your Internet connection or a computer using ICS (Internet Connection Sharing) or Proxy." Switches and hubs don't allow you to share a single IP address to multiple computers.

  Another solution is to contact your ISP and buy additional IP addresses for each additional computer. "

  D-link support found here: http://www.dlink.com/products/default.aspx?pid=DES-1024D&tab=3

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I connect to internet on my laptop using idea NET setter dongle it says the bad pool caller and will restart and restart

  Mr President, whenever I connect to internet on my laptop using idea NET setter dongle it says the bad pool caller and will restart and reboot... Here is the link to dupmp files https://onedrive.live.com/redir?resid=97d7886e9c3f12c6 mini! 104 & authkey =! AEE9bFVyH3uOKNg & ithint = % 2czip

  Hello

  Bugcheck 1000007E, {ffffffffc0000005, fffff8028a66f060, fffff8801b01b5c8, fffff8801b01ae00}

  WARNING: Unable to verify timestamp for ewusbwwan.sys
  ERROR: Module load completed but symbols can be loaded for ewusbwwan.sys
  Probably caused by: ewusbwwan.sys (ewusbwwan + 2bb5)

  ewusbwwan.sys dated 31/05/2011 driver Huawei Technologies Co.. Your USB dongle driver
  or a device attached to it.

  BugCheck C2, {b, fffff8029f4f8380, 0, fffff8029f4f8b90}

  WARNING: Unable to verify timestamp for c:\windows\system32\drivers\ewusbnet.sys
  ERROR: Module load completed but symbols can be loaded for c:\windows\system32\drivers\ewusbnet.sys
  Probably caused by: c:\windows\system32\drivers\ewusbnet.sys (ewusbnet + 2353)

  c:\windows\system32\drivers\ewusbnet.sys Ditto pilot.

  This driver update.

  Resolution of the blue screen in Windows 8/8.1 errors
  http://Windows.Microsoft.com/en-CA/Windows-8/resolve-Windows-blue-screen-errors

  ========================================================

  Check with HP Support, their drivers and documentation online and ask in their forums
  on known problems. Updated BIOS, drivers of low level chipset and on-board major
  and drivers of separate devices (see methods of updating driver below).

  BiosVersion = F.03
  BiosReleaseDate = 07/09/2012
  SystemManufacturer = Hewlett-Packard
  SystemProductName = PC HP Pavilion Sleekbook 14
  Family = 103C_5335KV G = N L = CON B = HP S = PAV X = Null
  SystemVersion = 087F1000003B5900000310100
  SystemSKU = C0P30PA #ACJ
  BaseBoardManufacturer = Hewlett-Packard
  BaseBoardProduct = 18F9
  BaseBoardVersion = 82,12

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  -----------------------------------------------------------------------------------------------------

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded: run DriverView - set the VIEW to hide
  Microsoft drivers - update those without drain in their names. (Also update BIOS and)
  low level chipset drivers.)

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now click on
  Driver update (this can do nothing as MS is far behind the certification of drivers) - then right
  Click on - uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Windows 8/8.1 - hardware and drivers
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Windows 8/8.1 - Why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  Windows 8/8.1 - what happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  ----------------------------------------------------------------------------------------

  Tests of memory intercept all errors such as memory do not match (possible even for sticks
  seemingly identical) and when the faster memory is placed in system behind the slower memory.
  So it is best to Exchange also sticks in and out to check for those, even if all the tests of memory do not
  show a problem.

  To test the RAM here control - run 4 + hours or so.<-- best="">
  www.memtest.org

  For the Windows Memory Diagnostic tool.

  WinKEY + W - type in the search-> memory box - find the top Memory Diagnostics tool
  list - and follow the prompts.

  How to run the tool in Windows 7 Memory Diagnostics (and 8/8.1) - in Windows 8 8.1
  the name is "Windows Memory Diagnostic".
  http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

  ======================================================

  After doing ALL the updates you can and if the problem persists, run DriverVerifier.
  (Remember to use the methods Windows 8 posted at the top of the first answer above).

  Driver Verifier can help find some BSOD problems:

  Using Driver Verifier to identify issues with Windows drivers for users advanced
  http://support.Microsoft.com/kb/244617

  How to solve the problems of driver in Windows Vista or 7.
  http://www.WinVistaClub.com/T79.html

  Using Driver Verifier
  http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspx

  How to use Windows drivers check Manager to solve problems and identify the Driver questions
  http://www.YouTube.com/watch?v=_VwIDD9xngM

  Driver Verifier
  http://www.techsupportforum.com/2110308-POST3.html

  Using Driver Verifier
  http://www.faultwire.com/solutions/using_driver_verifier.php

  How to use Windows drivers check Manager to solve problems and identify the Driver questions
  http://www.YouTube.com/watch?v=_VwIDD9xngM

  You can disable the driver verifier
  http://support.Microsoft.com/kb/244617

  WINDOWS key + X - RUN - type-> auditor/reset press ENTER to disable

  BlueScreenView lets you know if there is a driver specified in the error message. Also check with
  MyEventViewer at the blue screen.

  If DriverVerifier creates a minidump upload it and post the link here so we can analyze.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Internet is required to use photoshop mix

  Internet is required to use photoshop mix

  You need to download and then connect you. But I think it's everything you need to connect.

  Melissa

• Re trying to use the wired keyboard Standard with Bravia Internet TV KDL40EX640

  I tried to use a wired keyboard Standard with the KDL-40EX640 moderators to confirm and did not work. What I am doing wrong? Plugged into the side USB. I tried both connect the USB keyboard before and after the Tv turned on. Got on the screen "USB device connected" tried on Internet browser. Went to Yahoo and tried to use the keyboard directly on Yahoo or through the text entry screen. Tried to use it in the URL.  NOTHING NOTHING NOTHING.  HELPPPPPPPPPPPPPP!  Thank you.

  Hi na,.

  USB keyboard cannot be used with TV kdl-37V5500 also. USB port on this TV is designed to connect USB mass storage devices to access media files.

  If my post answered your question, please mark it as "acceptable Solution".

  Thank you for your message.

• I want to use my camcorder panasonic SC-with v720 good hdmi as a webcam how do I do that

  Subject: I want to use my camcorder panasonic SC-with v720 good hdmi as a webcam how do I do that

  I was looking for a good webcam (video camera) that I can use to spread my webinars.

  I can't find on the website of apple that works well with my macbook so I can use it in quicktime, Skype, facetime, google den, jam Webinar, goto webinar etc.

  If you know that a good webcam please let me know.

  Then I found an article on the internet how to use your own video camera as a webcam.

  But you must have some sort of converter video thunderbolt Blackmagic Design UltraStudio datalogger of 150 dollars.

  I don't understand that, my camcorder has my mac book has hdmi hdmi why isn't is possible to connect them so that I can use my camcorder as a webcam.

  My panasonic SC-720v is also compatible with imovie.

  Please who can help out me.

  Greetings

  Conrad

  The Netherlands.

  By the present the link which connect a video camera with the crush blabla UltraStudio recorder of Blackmagic Design Mini converter

  https://Ozar.me/2014/03/using-HD-camcorder-Mac-webcam/

  I think that the HDMI on your Air port was released only to screen external which is why you need the converter.

• I play world of warcraft and use a program called ventrilo to talk with other players. the problem I have is my game sounds can be heard

  I play world of warcraft and use a program called ventrilo to talk with other players. the problem I have is my game sounds can be heard.
  Vista makes my headphones 'speakers', so when I use a program called ventrilo to talk with other players in my game sounds are heard through ventrilo. My headset is a headset/microphone generic plug-and-play.

  When I run not WoW, I can hear my own voice through the headset speakers when I talk.

  I want my headphones to work so I can hear my friends talking and the sounds of the game, but I don't want the game sounds to be filtered on the server for voice chat

  Any help would be much appreciated. I asked the same question to Geek Squad and their response has been to try to charge me $49.99 + tax for one of their "agents" can remote in and fix it. Do not use them unless you have: P

  Hey CassiusVa,

  Welcome to the Microsoft Answers Forum!

  Since when are you facing the issue?

  Can I know the version of Ventrilo you use on your computer?

  It may be that World of Warcraft focuses on your audio hardware.  You can try to reduce the audio settings in WoW to see if this makes the use of Ventrilo better.  It may also be a driver problem.  I would check to make sure that you have the latest drivers for your audio device.

  Use the following steps to ensure that the audio drivers are up to date.

  1. connect to the Internet.

  2. click on start and enter the Device Manager in the start search field.

  3. click on the plus sign next to sound, video and game controllers.

  4. right click on the name of the sound material and select software update of the driver...

  5. click on search automatically for a driver updated and wait for Windows to update the driver software.

  6 Windows checks a remote Web site to see if the update of the driver software is available.

  * If an update is available, let Windows install the update.

  * If an update is not available, proceed to the next step.

  7. once the update is successfully installed, test the microphone.

  Please follow the steps below and check if you still have questions echo.

  Go into Ventrilo Setup and select mixer for the sound card, which will be the audio input (as determined by the "Input device" option) device. This will populate the Mux and line options. Normally it would take only a Mux. It is possible that you may have many options of the line. Go ahead and select "Microphone" or anything that is appropriate for the input line and then click OK.

  This should solve the problem.

  Please note that you select mixer, mux and line will allow the "Hardware Volume" slider This gives you the control hardware on the audio input signal and is the best way to control how strong you are. Setting the cursor to halfway better seems to work for most people, but it will be hardware and system load.

  You can also browse the links for more information on ventrilo and try to contact them if the problem persists.

  http://www.Ventrilo.com/FAQ.php

  http://www.Ventrilo.com/about.php

  http://www.Ventrilo.com/dlprod.php?id=1

  Let us know how it works.

  Kind regards
  Technical support of Microsoft-yama.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Can I use Siri new Apple remote with my Apple TV 3rd generation?

  Can I use Siri new Apple remote with my Apple TV 3rd generation?

  No. not compatible.