BlackBerry Smartphones spam and not the removal of Blackberry

Similar Questions

• Problems with printer c309g print not and not the removal of the queue

  
  

  Deletes the printer in Control Panel > printers.  Now, add back: 1. make sure the printer is powered on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing.
  2. click on > start > Control Panel > printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Choose No.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.

• I accidentally created an email acct, how I remove to the newest one and not the former?

  Entally created an acct email, how do I remove to the newest one and not the former? And I get e just on the other.

  Play the 'e' (email?) to the old account first. You can drag and drop.

  To remove an account from Thunderbird:

  Tools | Account settings| < select the unwanted account > |

  Down at the bottom of the left pane, Account Actions , and then click remove account.

  Both accounts use POP? This could explain why new messages appear in the new account, but not the former.

  It might help to post your Thunderbird settings data: Help. Troubleshooting information. Clear the checkbox "include account names. Click on "Copy text to the Clipboard", then paste (ctrl + v) into your next post here.

• Lenovo K900 - displaying only and not the contacts when I call

  Hello, I bought my K900 phone a few days ago in the shop in India. When I dial a contact or a contact trying to call me, only numbers and not the name of the contact on the phone. Help, please

  Hello, the issue of the sorted mate. I did return the contacts, remove the phone and them even once, Voila - restored to work like a jewel

• HOW 'to LOCK"or close CERTAIN CELLS... and not the overall sheet

  "ROS" with Safari 9.0.1 and OS X EL Capitan 10.11.1

  I would like to "bolt" of certain cells, new should not be changed... and not the entire sheet...

  Possible or not?

  How?

  Thanks for help

  gymsclos

  You can lock an entire table, but not to individual cells in a table.  An effective way to organize your document would be to enter data in a table that is unlocked and have results of the calculations in a separate table that you lock to prevent accidental changes. You can have several tables on a single sheet.

  SG

• WHY MY NEW EMAIL SEND MESSAGES IN THE FOLDER TO SEND IT AND NOT THE INBOX FOLDER? PLEASE HELP ME

  I must have changed something I shoud not have.  I was messin around to change things and it didn't work.  Now all my emails new message in the sent folder and not the Inbox?

  I'd appreciate any help you smart people can give me :)

  Check your message rules and see if you set up a message rule to shunt the in this folder.  It would be valuable to know what e-mail program, you are using and what version of Windows you have.  It is very difficult to give a useful answer when these information are not known.

  Steve

• When I send an email, it appears in my own Inbox and not the sent folder.

  emails sent appear in the Inbox clean.

  When I send an email, it appears in my own Inbox and not the sent folder.  Even if the box is checked, staging elements to move to the folder sent sent.  Any thoughts?

  Go to file | Identities and establish a new identity.  Then add your e-mail account.  When this works, then use a file | Import messages to import from the old identity.

  If you do not OE, then after return e-mail you what program use.

  Steve

• How can I change the cursor in an individual account (and not the owner) a computer to my client?

  How can I change the cursor in an individual account (and not the owner) a computer to my client?

  Hi MichaelConner1,

  You can keep the individual mouse for each user account on the computer.

  Log on to each user account and then change the mouse pointer scheme using the link below and check if it helps.

  http://www.Microsoft.com/enable/training/WindowsXP/pointerscheme.aspx

• My printer only prints the name of what his impression and not the body of the page or the content of the information

  Printer prints only name form and not the information.

  Hi paulminitello,

  What changes did you?
  You are able to print the test page?

  I suggest to reinstall the printer and then check if it helps.

• Can I shrink a logical drive and not the extended partition to a bare metal restore to a smaller drive?

  The current configuration is a Dell T310 with a S300 controller, with all locations 4 hot filled with SAS drives.  The operating system is SBS 2008 (2008 Server/Vista), I intend to change the controller of S300 (software) controller, a controller (hardware) H700.  My concern is that the H700 brings readers a little smaller in size.

  The typical arrangement of Dell's diagnosis, followed by a recovery partition partition (E :), followed by the system partition (C :), followed by a partition with a logical volume (d).  If I use Diskpart to shrink the D: 'partition', he let me with free space, not allocated.  Thus, it effectively reduces the logical drive, and the extended partition stays the same size as it was, with no way to reduce it.

  The question is, if I shrink the logical D: drive and not the extended partition and then get backups of the system, I'll be able to a bare metal restore on the smallest virtual disk of the H700?

  That's what I did:
  -Released the S300 controller and 4, 450 GB, 15 000 rpm Cheetah RAID-5
  -Replace the controller H700 and 2, 2 TB 7200 RPM in RAID-1 Constellations

  Results:
  -Eliminates the possibility of falling on a disk space issue when restoring
  -Increased the amount of available disk space.
  M ' left with 2 free hard drive for future expansion bays.

• Transferred file xp laptop visa vidio. Has received the record of voice only and not the vidio

  Transferred video files from xp to laptop of visa.  A received voice only and not the video file.  Now, I have that video file without sound on the xp and visa phone only plays the sound.  How can I fix it?

  Please repost your question in images and video Forum at: http://social.answers.microsoft.com/Forums/en-US/vistapictures/threads where people who specialize in graphics issues, including partial transfers (sound or video only) will be more than happy to help you with your problem.

  Good luck! Lorien - MCSA/MCSE/network + / A +.

• When you rename a file highlights only the name and not the name extension.

  Hi all

  When I rename a file, it highlights only the name part of the file name and not the name extension.  I need the name of entire file highlighted when I rename a file.  Where is the setting to change this?

  Thank you

  Pete

  Hi Pete,.

  Engineers also writes a blog on why they made this change, but to prevent millions of calls to support technical questions "I renamed my file and now it no longer opens.
  It might be possible to change this behavior with editing the registry, but I couldn't immediately find a reference to such a value.
  However, I have a workaround.  I usually press F2 to rename a file (I'm a lover of keyboard, hate having to use the mouse).  So I click on F2, then if I need to select both file extension, I can make one of these:
  • Press Ctrl-A
    or
  • Press SHIFT - end

  I generally use the method of shift - end because it's closer where my fingers are already on the keyboard (I'm a lover of keyboard, but I'm too lazy).  Hope this helps at least a little.

• Start menu music link to my music and not the music library?

  Can I do the start menu links to music, documents and videos show my user folders for these items, rather than the folders in the library?
   
  Here is a picture to better understand: http://i.imgur.com/71Ro6.jpg

  I want to link the music to actually view the items in my music folder and not the folder 'my music '.

  He cannot do.  It can show the folder that then flies on to display the content when you hover over the name of the folder [XP-style].

  Just to make sure that we are not misunderstanding each other - set the start menu entry to be "Show in form of a menu" rather that "display as a link" on start, do a right click, properties, customize.

• Windows 8 apps and not the store opening.

  Windows 8 apps and not the store opening. They all have respectively written on their tiles Microsoft.Windows___... But all working apps on another user account.

  What I found on the menu START, the tiles are special, if you copy the shortcut of STORE from another computer of Windows 8 and paste into the folder C:\ProgramData\Microsoft\Windows\Start start\program. It will become available in all applications, you can then choose to pin it back at the BEGINNING.

  We'll find all THE APPS click with the right button on an empty part of the Metro user interface.

• Overflow of the header and not the foot

  Hello

  I use a multiline text field.  With the mask set on B, I have more than 1024 characters at any given time.  When reading data from an XML in the field. It prints several pages. I know overflow is not supported for MultiPage a multiline text field, but the overflowing of header... and not the footer?

  Is this a bug or am I missing something?

  Thank you very much

  Hi Sid,

  Please ensure that you have enabled the copy options of overflow in header and footer. Also please check multiline properties can cover, can develop.

  Please give abs, abs in the page footer section and activate the copy of overflow for this article and try it.

  Please let me know if you need any additional details...

  Thank you

  Senthil Kumar