BlackBerry Z30 2 IP addresses on the T-Mobile Mobile phone network?

Similar Questions

• BlackBerry smartphones, I'm in Egypt but my Blackberry 8520 think it is in the United States - cell phone in Egypt numbers start at 0

  Hello

  I bought an unlocked phone from T-Mobile in the United States which I use with an inLuxor of sim card Etisalat, the Egypt, where I live now.  I have no problem that the following exception:

  I can't use my list of contacts to make calls because the Egyptians cell phone numbers begin with 0 and my blackberry automatically adds a sign before the number as a number of foreigh - which makes the invalid number.  So I have to dial the numbers that I use more again and again.

  Has anyone had a similar experience and can advise me how to fix this?

  Thank you in advance.

  Karin Cruz

  The smart dialing options are there if you look where I said.
  Press your green dial key to switch to the phone dialer screen and proceed according to the instructions.

• BlackBerry Smartphones send photos that I take other mobile phones.

  I would like to know if there is a way to send picutres I take with my BB to other mobile phones, instead of their email. PLEASE HELP SOMEONE.

  First download and install from here Office Manager (4.7 without Media Manager is recommended): https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22

  Then download and install the software from here: http://na.blackberry.com/eng/support/downloads/download_sites.jsp

  Then try to reload the operating system by connecting the device to your computer, open the Desktop Manager, then go to the Application Loader. This will open a wizard who travels to reload the operating system on your device. More detailed instructions can be found here:
  http://CrackBerry.com/BlackBerry-101-How-install-or-upgrade-new-rim-operating-system-OS

• BlackBerry Z10 writing new Messages - Contacts combines a Mobile phone number, home

  When I chose to compose a text Message and select by a Contact who has multiple phone numbers stored, the phone selects the telephone number of the Contact homepage default rather than their Mobile phone number. I'm doing something wrong?

  I did a little experiment, created a group with 1 contact, send a text message to the group, sms went to the house number.

  I deleted then house number (which was at the top of the list) then added a new home field. After that the number of publishing house has yet shown on the top of the list, but sms now went to the Mobile number.

• The cloud, mobile phones and save automatically.

  Hi all

  Bit of a mash of questions here so please bear with me.

  First part of my question is about 'cloud' for storage.  I'm a designer and I've never used the cloud / all cloud for storage as I always have just saved on my hard drive.  Of course, this has its limits and is not at all afraid (except perhaps not being able to access the cloud but hard drives can fail too).  People use the cloud as their main storage medium for their records?  I wonder if there is a way that when I save my work on my computer it could automatically save in the cloud (perhaps overnight auto update?) Or the other way around, I save to the cloud, then it downloads on my computer?

  Second part of my question is regards to mobile phones and outlook, which I know is not a matter of CC but I wanted opinion techno that I'm not very aware of the tech stuff.  In September, ends my mobile contract.  For now, I can get my emails on my phone (iphone 5 s) but I don't know how (or if possible) to set up my schedule so it is all synchronized with outlook.  My emails with Gmail via outlook on my pc running.  My question is: what is the best phone / implemented to reach my emails etc being synced calendars?

  Thank you!

  Links for synchronization of files that can help... all the links I have, since I do not use cloud storage

  FAQ - https://forums.adobe.com/thread/1937790

  -https://forums.adobe.com/community/creative_cloud/host_sync

  -http://helpx.adobe.com/creative-cloud/help/sync-settings.html

  -http://helpx.adobe.com/creative-cloud/kb/arent-my-files-syncing.html

  -Size limits https://forums.adobe.com/thread/1488242

  -sync and send a link http://forums.adobe.com/thread/1427516?tstart=0

  -Record ghost https://forums.adobe.com/thread/1490445 problem

  -an overview of https://assets.adobe.com/files assets

  -File sharing https://forums.adobe.com/thread/1838790

  I do not use cloud storage, I use an external enclosure and turns many readers 'naked '.

  Docking station USB3 with fan to swap disks http://www.amazon.com/StarTech-SuperSpeed-Docking-Station-Cooling/dp/B0055PL2YI or http://www.newegg.com/Product/Product.aspx?Item=N82E16820147511

• BlackBerry Z30, an error occurred during the installation of the software

  Hi all, hope someone can help. I have a new Z30 which does not seem device for Outlook synchronization. When I remove/open email on the device, it does not have the same on my Outlook on the PC, but it does not vice versa (i.e. When I remove/open an email on my Outlook on my PC's did the same thing on the device). In order to solve this problem, I thought download drivers/software may help, but when I try to do it I get an error "an error has occurred during the installion of the software. Some of the previous versions of the software installation files cannot be deleted. Make sure that no other application is using these files. I'm went into Control Panel and tried to remove the old version but cannot find all programs installed RIM or Blackberry. Am I missing something here? would be very grateful if someone could help that may have had a similar problem? Thank you, Hannah

  Starting from the hub, select the overflow menu down/right 3 points. Then settings > display and Actions. This screen offers a framework for "delete On". If this is set to 'Hub' only, then the behavior is as expected... change the setting you want.

  You can also try remove and reinsert the account from scratch... sometimes that helps things.

  Unless... you found "it is a working device"... If by that you mean that this is a BES compatible device, then you should work with your BES administrator.

  Good luck!

• BlackBerry Q5 how can I change the id on my phone blackberry

  I don't remember my old password and I have more I'm a new I had e-mail but doesn't let me do it on my phone? Can someone help me please

  Yes. In addition, you will not be able to restore the backup of the old file to backup the device with a new BBID BBID. Here's a knockout who explains:

  http://www.BlackBerry.com/BTSC/KB31317

• BlackBerry Smartphones Can an update of the storm directly by phone?

  Sorry to bother you all again, but I seriously think that there is a problem with my storm is updated via my laptop.

  Given that the phone is connected to the net, is it possible to update directly instead of via the laptop?

  Thanks in advance

  OLA

  No, it is not possible.

• BlackBerry Smartphones Blackberry app world does not appear in my mobile phone while using it in Saudi Arabia

  Dears

  blackberry app world icon diappeared everything uses a Saudi sim card please help I need to download the new bbm

  Hi Ziko99,

  Please take a look at the following article for assistance with the BlackBerry App World on your BlackBerry Bold 9780 smartphone missing icon. 'BlackBerry App World icon is missing after upgrade to BlackBerry App World 4.0.0.63 to 4.0.0.65' http://bbry.lv/SPblgT

  I hope this helps.

• Need a driver to be able to read the SIM mobile PHONE for Windows 7

  Need a driver to read card GSM Sim for Win7 64 bit. There seems to be a lot of scam software available, so I would get help here. Thank you

  Original title: gsm reader app

  Need a driver to read card GSM Sim for Win7 64 bit. There seems to be a lot of scam software available, so I would get help here. Thank you

  You need hardware to read first.  Most of the material will allow you to read a GSM SIM card fine.

  ~ 3 to 15 USD.

• BlackBerry Smartphones not connect to the e-mail address of the server

  1.i cannot connect to my BlackBerry9360Curve to the e-mail address of the server.

  2. keyboard light are off permanently

  Could someone help me? This is my first experience with BB

  Hello viale149!

  Welcome to the community

  Here are some links to help get started you on your phone, you can check.

  BlackBerry Tips and tricks

  BlackBerry 101

  BlackBerry battery Saving Tips

  Regarding the questions of your phone, please start by removing the battery while the device is activated as this version fixes common software problems. For e-mail, please ensure that you have your carrier Blackberry data Plan and it is active. Go to the configuration of the home screen icon, and select e-mail accounts.

  Ron

  Ron

• BlackBerry Z30 Wifi - connected but no internet

  Hello!

  I m new to Blackberry and just received my Z30 (that I really like a lot!)

  I still have a problem with the wifi connection. I managed to connect to my wifi router. In the settings, I see that the connection is active. The signal is good.

  But on the top bar, I still see the 3G icon (instead of the wifi icon). I also received a message that my wifi has only limited access to internet.

  I know the router works, because all my other devices (for example the laptop I m typing this message on) do not have access to the internet.

  Are there special settings, I have to check on my blackberry z30?

  I found the wifi settings advanced with a lot of technical information about the wifi connection - which, this information, if I post to help solve my problem?

  Thank you very much for your advice!

  Try to go to settings network connections and disable data services and then try to reconnect to the wifi

• Help: Why the IP addresses change in a multi-router Home Network (Wrt320n, wrt54g2)

  I am trying to update my routers and computers at home. Previously, I had a router connected to the internet with a wireless G and an another wireless router connected to the external router with another wireless G network. The external wireless network was used to play games and the internal network has been used for all the other stuff TIVO, access points of impression, computers, etc. The external network had 192.168.1.x ip addresses, and the internal network addresses are 192.9.2.x used routers were linksys wrt54g and wrt54g2. Everything worked.

  So I bought a Linksys wrt320n and put in place that the external router. However when the internal router is connected to the external router, the ip addresses of the devices connected to cable networks and wireless to the internal router are numbered 192.168.1.x instead of what I expected (192.9.2.x). This resulting in the Buffalo Access Point and the access HP Points not being seen in the network. In addition, if I disconnect the internal router to the external router, after reboot ip addresses are what I expect.

  Of course, technology has changed or I was very lucky. But why are the IP addresses internal changed/performed by the external router? I watched as each private network between them.

  Any recommendations? I hope that there is a setting I can change to fix this. Any help is appreciated.

  1 192.9.2.0/24 is a subnet public IP, which is owned by Sun Microsystems. It isn't a private IP address subnet available for private use. I recommend you change the subnet to a private inside 192.168 IP subnet. *. *. With the IP subnet, you use currently, you can access these public Sun IP addresses if you need them...

  2. what you write seems to me as if you connect the internal router with an external router LAN port. With your configuration, you must connect the internet port of the router internal to an external router LAN port.

• Profile Manager - failed to install the remote access profile in the domain environment & multi-Active Network Directory

  Hi all

  I am a COMPUTER administrator for a college and I am trying to fix what seems to be the last hurdle in getting the Profile Manager works correctly.

  I worked for a while now trying to get the Profile Manager capable of pushing the device and profiles for Mac in our group network environment. I was able to operate intermittently, but not often. Most of the time I'm unable to install the remote management profile.

  When you try to install the remote management profile, I give myself one of the two errors-

  The first error is:

  The Installation of the profile failed.

  The «TeleManagement (com.apple.config. » profile (Server.FQDN.mdm:GUID) "could not be installed because of an unexpected error < MDMResponseStatus:500 >

  (Obviously server.fqdn and GUID are placeholders for their actual values)

  

  The second mistake is:

  The Installation of the profile failed.

  Failed to contact the Protocol SCEP server to ""http://server.fqdn: 1640/CEP / "."

  

  The server Mac OS X 10.11.4 works

  OS X Server is version 5.1

  Client Mac is for most running 10.10.4

  Here's a quick run down on the environment and the steps I have already taken to solve the problem.

  • The network is an Active Directory with several networks multi-domain environment. I mainly work with two different networks, each associated with one of the two areas.
  • The Mac server hosting the Profile Manager is a Mac Pro. The two network cards is used, each on one of the two networks. The Mac server is joined to the domain in the primary forest.
  • I opened all the ports and IP ranges for Apple's Push Notification service for two on our firewall and tested networks between the two networks to ensure that the AFN is accessible.
  • I created a static DNS entry for the server in the DNS zone for the main domain. I also have a separate DNS zone for the DNS record for the interface on the secondary network. I also confirmed that Macs see the correct IP address of the Mac server for their network.
  • I tried to change the settings for network access for the Profile Manager. The first error seems to happen when the Profile Manager are restricted to the network the Mac client is not connected. This same error also occurs if I open Manager profile access to "all networks".
  • I have experiemented with the different certificate types. In general, I use the self-signed certificates that are generated automatically. In this scenario, I install the profile Trust first (which works seamlessly regardless of network or domain). I also tried to use a certificate for Code signing signed with our own CA to sign the profile of remote management. The same errors will occur no matter what certificates are used.
  • The second error occurs when the access profile manager is limited to the same network that is connected to the Mac client
  • I ran Wireshark captures on several client computers, as well as on the Mac server interfaces and haven't seen any traffic blocked or rejected that seemed related to the Profile Manager
  • I've deleted and rebuilt my OD master
  • I also scoured newspapers for clues Profile Manager and haven't found much
  • In addition, I have also studied the problem and error codes/etc widely and have not found a lot of useful information
  • I don't know there are any other troubleshooting steps I took as well, but I've been question bout this for awhile and I don't remember everyone.

  That's a strange thing - I had it working for Mac on the main network and the domain. However, I discovered that the Mac on the secondary network and the field was unable to download the profile of remote management. This is when I started to change the Profile Manager, access network, which eventually introduce the problem on Macs connected to the primary/field of experimentation network. Change access return settings in Profile Manager does not restore functionality for pimps who worked.

  Another thing odd in this test scenario all - Mac on the network high school/area would not install remote profile unless management I temporarily moved it to the main network (I do not untie / reassign to one the main domain on these Macs) I could get the profile of remote management to install and then pushing profiles has worked. Even more strange, it's the Mac that I had to move temporarily secondary network to the main network to allow remote management profile install only works always as long as the Profile Manager are restricted to the secondary network and 'the Mac'. However, Macs in the same room, on the same network in the same field, using the exact image even get the errors described above.

  The only thing I have not yet done is delete/reconstruction Profile Manager. I would really like to avoid this if possible. Solutions that involve something like Casper or other software integration AD for Macs are also a non-starter.

  I'm happy to elaborate if necessary. I appreciate the help.

  Okay, I think I can find the root cause.

  Before this discovery, I had completely rebuilt Profile Manager. Now, I managed by pushing the management profile remote for Mac in the two fields/networks. However, many of them still refuse to install remote management profile.

  Macs who encounter the problem are all were imaged using NetRestore using an image captured from an another similar iMac. IMac even that was used to build the image has now been reassigned in a test of Mac. I found that when you attempt to register one of the Mac who had received this image it shows already as "registered" when you go to "mydevices" on my Mac server. I also noticed that they all have the serial number of the test Mac when viewing their "register". Among the issues of Macs, I activated the lock of the device from the page "mydevices" for the so-called problematic Mac registered (showing the serial number of the iMac used to create the image) and it locked the iMac used to create the image - not the Mac issue.

  This tells me that the CID (or Mac equivalent) is set on the Mac CID used to create the image for all of the Mac said image was deployed to. If it's a Windows box I have a sysprep prior to deployment or could perform a rearm after the fact. I am unaware of how to perform similar functions in OS X.

  I tested also since on some Macs that do not have this image, and they are able to register and install the profile of Managing remotely with success.

  If anyone has any suggestions on how to reset the CID (the computer ID) under OS X, I'd appreciate it. Thank you.

• An iPhone Unlocked verizon 7 will work with the T-Mobile network?

  I expect to buy an iPhone 7. I am currently using T-Mobile, but I'll probably use CDMA-based network when I spend my winter in China. Anyone know if an iPhone Unlocked verizon 7 will support the T-Mobile network? Thank you very much

  If you look at the following:

  http://www.Apple.com/iPhone/LTE/

  iPhone 7 seems to have 2 different CDMA models:

  model A1660 (CDMA) iPhone 7

  model A1661 (CDMA) iPhone 7 more

  and 2 different models of GSM:

  Model A1778 iPhone 7

  Model A1784 iPhone 7 more

  My guess is that the models of Verizon (CDMA) do not work on the T-Mobile GSM network. Data connection does not work at least LTE. Not sure about the voice. T-Mobile and AT & T models may support data LTE in both networks.