Blu - Ray via HDMI

Similar Questions

• Windows Vista Pro 8 (6920 Blu - ray. HDMI, computer laptop specification Dolby theatre)

  I'm not to mess with the system if it works fine but I had a date and time modified virus that what IS of Norton did not stop. As Windows 8 Pro is at a reasonable cost, 45 books on Amazon, I'm looking to use the upgrade version upgrades XP, Vista or 7.

  But how can I be sure all features dedicated programs Acer are deferred, because they do not seem to be available on the Acer site and there is no certainty Vista restore won't work until 8 years old or any of the software pre-loaded on my BluRay 6920 Dolby theater sound system is compatible to Windows 8?

  More proactive than me all done already, and what was the result?

  Phil

  UPDATE:

  Date problem solved: I came across an article on ebay when getting a new screen for my netbook 521. It was for a battery CMOS 6920 and mentioned the date zero issue and need to change the battery every 3 years or more.

  DATE NOW MAINTAINED AND FUNCTIONALITY OF VISTA FULL RESTORED, HOORAY!

  Have tried two mechanics and this forum for a solution, why the hell does someone knows about it. Of course really, now the 6920 was demoted to essentially use of entertainment by acquiring the very portable but still hi-def output 521

  Phil

• Satellite A660-1DZ - reading Blu - ray HDMI by TVe

  I have connected the PC to a TV Philips 42 "with capacity of 1080 p and HDMI 1. 3 has control. I chose TV as the only display (Fn + F5 function) device.
  The default resolution emerged as 1920 x 1080. DVD plays without problem with the Toshiba drive group and upscaling on.

  I just bought the blu - ray disc of experience OpusArte. It loads it starts playing with the Group DVD of Corel player. Then every 3 or 4 seconds the sound is interrupted - i.e. stop and stars again. Also, the sound and vision are out of sync. It's almost as if the sound is taken off the drive in 'packages' and joins are audible.
  I can't really find the settings to change the audio - it crosses 2 stereo channels.
  If I change the resolution of the TV from 1920 x 1080 to 1280 x 720 he played okay until about two minutes before the end of an element when the noise stops and restarts all of a sudden.
  Playback on the PC without the connected TV is OK.

  I don't know what blu - ray resolution is supposed to play in, but I tried from the looks of the same photo at the same time.
  I also noticed that the PC using Intel Graphics all the time despite a Nvidia card. I bought this laptop particular, partly because he had blu - ray and HDMI capability. Also the Nvidia graphics do not appear to be used. I wonder if the processor is not dealing with the video and audio?

  Any help or ideas on this would be very welcome.

  Thank you

  Post edited by: eddyad - minor Bill to text

  Hello

  Just a question: is described general issue or you have noticed with this blu - ray OpusArte?

• How can I use a Sony Blue Ray on my Macbook Pro

  I have a Sony Blue ray with HDMI and I wanted to watch a movie on my mac, but when I use my HDMI port on my computer, the device is an empty file and the video player cannot display the dvd player.  knows there are adapters for HDMI to love at first sight, but why can't I use my existing HDMI port of pre?

  Anyway, if someone could help that would be great.

  If you are looking to play Sony's Blu - Ray discs on your computer, you can not, as the laptop is not all video input ports.

  Leo

• Laptop Wireless to the Blu - Ray format?

  I'm my BDP-S370 to the network wireless network without buying the UAW-BR100. I got to thinking, I have a laptop soon sit 4 feet from my TV. Would it not possible to connect the laptop to the Blu - Ray via USB to USB cable and accomplish the same thing as the UAW-BR100?

  I really hope that someone will answer your question because I was woundering the same

• M1530 - 8600 m GT - Blu ray - Vista 64

  Guys I have a M1530 with 8600 m GT

  I installed a Pioneer BDC-s02bk blu - ray via a connection drive external sata/usb2.0

  I am using Vista Ultimate 64 bit

  I can't read the bluray, if I run Cyperlink BD Advisor, it says my video card is not compaitable

  I tried a lot of drivers currently have installed 177.89...

  Please help - help greatly appreciated

  
  

• Blue ray does not work via the HDMI or VGA output to my TV 52 "

  HP HDX X16T-1100

  Vista 64-bit

  512 MB NVIDIA GeForce 9600 M GT (driiver 7.15.11.7948)

  HP Media Smart seems to have asked on 3-11, so I can only assume it is the latest version. Gawd knows where you fined the version number on it.

  When I put a Blue-ray disc in the smart software HP Medic works very well. I can see and watch the movie. When I try to connect my TV via VGA or HDMI I see that the menus and the HP Media Smart interface. There is just a black screen where the movie should play.

  The thing works very well for a regular DVD via HDMI or VGA... problem seems the disc blue ray only.

  Thoughts?

  Nevermind I got it. There are two ways to fix.

  The TV as the primary monitoring, or extend the desktop to the 2nd monitor.

• New Blu - Ray HDMI sound problem

  Whenever I play a most recent blu - ray with the Mediasmart DVD application disc, I get only sound through my speakers laptop even if my TV is plugged into the HDMI port and I can say that the port is the current output device into the cursor of the mouse on the sound icon on the taskbar.  I updated the driver program and its Mediasmart as much as I could.  If I play an old blu - ray or DVD, the sound comes out of the TV very well.  In addition, any other application that uses sound works fine too.

  I tried the suggestion of HP in the FAQ where they tell me to put the "SPDIF (Digital out via HP docking station)' as the default in the sound control panel device.  But I don't get all the sounds for any application to do this.  I've noticed that the SPDIF device using IDT audio codec high definition, which is the only sound driver that I can update.  The NVIDIA HDMI output device which is under it in the control panel uses the NVIDIA High Definition audio instead, and I don't know how update if necessary.  Any suggestions?

  BTW, I use a laptop HP HDX 16 with Vista Home premium 64-bit.

  Message edited by nodakjoe on 08/24/2009 22:34
  Message edited by nodakjoe on 08/24/2009 22:35

  I had the same problem.  Here's what worked for me:

  Remove the drive blueray disc.

  Reboot the laptop.

  Turn on the TV and select it's an HDMI input.

  Connect the HDMI to the TV cable to the laptop.

  The display shall transfer to the TV (laptop becomes black)

  Open the Mediasmart drive.

  Select DVD

  Open "Settings" (the gear symbol)

  Click the tab "Audio".

  Select "HDMI passthrough" and apply.

  NOW, put the blueray disc in the drive.

  Give it some time to start on its own.

  (Note; If you try to adjust the "settings" with a disc in the drive, or without going through the HDMI cable connected, the "HDMI" passthrough not appear as an option.)

  Now that I have followed this procedure, I got no additional problem. TV audio plays, not the laptop, and I can use my home theater sound system to take the "audio" television and he takes in my cable box (and increase the volume of the TV at the bottom).

  I hope this helps. I was pulling on my hair until I discovered this. Let us know if it works for you.

  Message edited by hd1 on 2009-08-25 09:39

• TV can not see blu - ray Sony BDP-S5100 player connected by hdmi

  How can I get my LG TV to recognize my drive blu - ray Sony BDP-S5100, connected by a hdmi cable high speed.  Television can see my fine decoder, but cannot see the BDP-S5100, showing instead a "NO SIGNAL" message.

  I spent the HDMI cables, HDMI, and always the cable box ports is recognized but not Blu - ray player.

  Twice the Sony Blu - ray player has managed to get his screen on the TV for a few seconds and then back to 'NO SIGNAL'.

  Tried the STOP button - on the player! -for a little more than 10 seconds.  Nothing.  Everything off, then back up again.  No difference.  Because the Blu - ray player is not appear on the screen, I can't change any settings in this topic.

  Help?  I need clarification.

  Thank you

  Derrick

  You can consult this article for troubleshooting steps.

• You can play itunes from a computer via a Sony blu - ray with a wi - fi connection?

  I would like to listen to the playlist on my desktop that is connected to a wireless router. Can my blu - ray receive and play this music? How do I configure this?

  Thank you-

  Cindy

  You can set up your computer as a DLNA server and access playlist from iTunes in the Blu - ray player using the DLNA feature. iTunes software can stream music using the Digital Living Network Alliance (DLNA) technology if it is connected to a file-sharing application.

  Some examples of file sharing applications (Media Server):

  • Windows Media Player
  • Software VAIO Media Server
  • Media Server DLNA Serviio
  • Twonky suite
  • EyeConnect UPnP AV Streaming media

  Instructions for the Computer Configuration such as DLNA server are mentioned on the technical support article below:

  http://www.KB.Sony.com/selfservice/documentLink.do?externalId=C1019860

  NOTE: Not all Blu - ray players are compatible DLNA. To see if your player is compatible DLNA, check the features that are available through the manuals/Specs/warranty section after you enter model # Blu - ray drive in the link mentioned below:

  http://eSupport.Sony.com/us/p/select-System.pl?model_type_group_id=1

  If my post answered your question, please mark it as "acceptable Solution".

• Blu - Ray with external TV

  I have a HP Pavilion dv7-1175nr with blu - ray disc player.  The player is a blu - ray movie very well to the laptop screen.  However, when I connect my plasma tv 720 external resolution via hdmi port, I get an error message when you try to play blu - ray movie.

  The error is:

  The content is protected

  The content is not allowed to play in the current display mode.

  Can someone help me understand what the problem is?  I'm sure I have a configuration problem, but that he cannot understand it...

  Thank you...

  You must turn off the computer screen, then it will work.

• Toshiba 42WL67Z - no picture via hdmi and vga

  Hello

  After a power outage, my 42WL67Z (Regza LCD) no longer displays a picture via hdmi and vga.

  The computer receives a TV signal, it detects the screen when connected and offers the usual option (duplicate or prolong the display, screen resolution), but no image is displayed.

  The OSD works well.

  Ideas?

  > Ideas?

  I think that you first need to connect to another device (DVD player, Blu - Ray player, etc.) on television and must choose the right channel to enter the settings.
  If TV continues not to receive all the signals of such device, it means you have a hardware problem.

• Satellite L775-13D: how to get full screen, Blu - ray playback on TV

  Hello
  I want to play DVD bluray s directly from my laptop to my 42 in LG plasma. I can connect via HDMI, but a small part of the sides and the bottom are cut on the TV. How to make the image plays on my TV without quality loss, as if I had a Blu - Ray player connected to my TV? I hope someone can help

  Thank you
  Geoff

  When this happens peak appears on TV only?

• Problem reading with film in Blu - ray 3D on Satellite P750 / 02Q

  Hi all, I recently bought the laptop Toshiba 3D (P750 / 02Q). In my attempt to watch a movie on Blu - ray 3D, he failed twice. I received a message 'is not capable of reading 3D screen connected to your player. On the other title 3D Blu - ray, they say somethng in the lineage of I don't have a 3D player.

  I use the WinDVD pre-installed for Toshiba, version 10.0.5.822
  On the NVIDIA site, in the section "Download the Drivers", the current version of the driver installed in my computer after completing a sweep, is 267.44. There is a new driver available for NVIDIA GeForce GT 540 M 275.33.

  I'm not sure if this wil solve my problem. I also hesitate if I need to contact support for drivers certified for my laptop Toshiba. The P750 / 02Q is a recent model of liberation and I find very little support on the mytoshiba site.

  Hello

  I found a few Toshiba FAQ s on 3D technology:

  3D videos on your internal LCD or external 3D via HDMI port TV
  http://APS2.toshiba-tro.de/KB0/TSB0B032B0000R01.htm

  Since it is an Australian model of Toshiba, I suggest check this Toshiba driver page:
  http://www.MyToshiba.com.au/support/computers/satellite/P750/psay3a-02q001/download?OS=25

  Here you must update the driver display and Toshiba Video Player

  Take a look here also:
  Impossible to play 3D BD movies
  http://www.MyToshiba.com.au/support/item/436

• DTS - HD and Dolby TrueHD audio via HDMI or S/PIDF. Is this possible with HPE-140sc?

  I have an audio DTS - HD and Dolby TrueHD via HDMI or S/PIDF of blu - ray movie? I request because the Nvidia homepage not listed this support function for gtx260 (http://www.nvidia.com/object/3d-vision-requirements.html) and the homepage of Reatek'a is the same for ALC888S (http://www.realtek.com.tw/products/productsView.aspx?Langid=1&PFid=28&Level=5&Conn=4&ProdID=141).  What kind of problems is if there is no support in the HPE-140sc for Dolby TrueHD or DTS - HD audio? 3D-Cinema compatible reading is necessarily I can't find reading compatible sound card 3d video. Is the cheapest solution in this case buying gtx460 if I want to get DTS - HD and Dolby TrueHD audio?

  Pether, I don't think it's possible with the GTX260.