Blue error screen "memory management".

Similar Questions

• blue screen with the error of MEMORY MANAGEMENT. 0x0000001A

  Separated from this thread.

  Hello

  I have a toshiba satellite c870. When I turned on my computer, I got a blue screen by reading the following:

  (blue screen)

  : (

  Your PC has encountered a problem and needs to restart. We are only collecting the error information, and then we'll restart for you. (100% complete)

  If you want more information, you can later search online for this error: MEMORY_MANAGEMENT.

  Then it restarts and I get these 2 following errors of switching back and forth between the two sound tempting to prepare auto repair. See below:

  (blue screen)

  : (

  Your PC has encountered a problem and needs to restart. We will provide for you.

  If you want to learn more, you can search online later to this error: NTFS_FILE_SYSTEM

  Then he goes to the black Toshiba Logo screen as usual and reads the following:

  preparation auto repair...

  And then it goes to another screen blue read the following error message:

  (blue screen)

  : (

  Your PC has encountered a problem and needs to restart. We will provide for you.

  If you want to learn more, you can search online later to this error: FAT_FILE_SYSTEM

  He'll then return to the Logo of Toshiba screen, then the Blue error screen (NTFS_FILE_SYSTEM), then return to the Logo of Toshiba screen and then the Blue error screen (FAT_FILE_SYSTEM). It just keeps it again and again and does nothing else. I removed the battery, removed all caps, deleted all devices USB (mouse) and pressed the power button for 60 seconds. Then I put the battery in place, pluged in the power cord and it turned on. I got the same results, as shown above. NO CHANGE! HELP PLEASE!

  Well Vista and before "XP", usually, do not use the FAT32 file system, they use, as do the new OS NTFS.

  Vista/XP can read FAT32, & can / could use, but its outdated... Memory is not really in this case, but

  you too extended the hardware capabilities of the pc.

  From this point, try to start the BIOS, the value 'advanced settings' once this done, change BIOS for any add-on

  material, save & exit.

• Satellite C660 shows blue screen (memory management)

  I have a C660-24f, which is around the age of 12 months, and I had the problem with it since I got it.

  There suddenly restart with blue screen (memory management).

  > I have a C660-24f, which is around the age of 12 months, and I had the problem with it since I got it.
  Why wait so long? You may contact Toshiba service whenever you want and ask for help, or at least for the good advice.

  Have you tried to do something about it?
  Clean installation of recovery maybe? Have you noticed this error when the laptop works with the factory settings?

• Blue error screen when indexing the files on Vista computer

  Original title: Problem Event Name:_BlueScreen__ OS Version:_6.0.6002.2.2.0.768.3__ Locale ID:_1033__

  BCCode: f4

  BCP1: 00000003

  BCP2: 872E2D90

  BCP3: 872E2EDC

  BCP4: 81E33710

  OS version: 6_0_6002

  Service Pack: 2_0

  Product: 768_1

  Before I tear off my hard drive and throw it out the window, please tell me I can recover from this error. The above error when I try to rebuild my Index. I regularly get messages "index has stopped working". I select the indexer rebuild to the original configuration. He tried to do, but stopped after the indexing of files about 1700, restarted, and then returned with the above event. I had several problems with my OS for a few days. I have run chkdsk and chkdsk/r several times. I use Norton 360, analysis tell me that all files are up to date, Windows update is performed regularly and is up to date. I was initially received an error "parameter has exceeded its normal range" train SMART. I disabled this option considered, but service to have problems with my system. Everything seems to work okay in safe mode, where I am now. I am at a loss. I have a recovery partition on my drive, but did not know what options to use. I have the installation CD Vista too, but avoided to reinstall, have done this before for another question. For any help or suggestion will be greatly appreciated. Please see my other post earlier this week, I was only partially successful with this process. Thank you very much!

  Hello

  If a PC remove all power to the system:

  Check and replace the cards, memory and cables (at both ends) actually remove and replace
  -do not just tight. Memory could be the problem, so if you have more than 1 stick swap
  in and out to see if the problem follows a stick or try the new memory. How to test
  memory in the next message.

  -------------------------------------------------------------------------------------------------------

  Pick up the pieces after a computer crash - includes "what to do if Windows doesn't.
  start correctly'.
  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  ================================================================

  BCCode: F4 0x000000F4

  Check and reinstall the cards memory and cables (at both ends where possible) actually remove and
  replace - do not just tight. On a laptop computer on all you can do is reinstall the memory and possibly check
  the contacts/connection to the hard drive. Memory could be the problem, so if you have more than 1
  stick swap them in and out to see if the problem follows a stick or try the new memory. Antivirus/anti-
  spyware/security programs have been known to cause or have a role in this matter.

  More general patch updates day and low level chipset BIOS drivers and other software to control.
  Also check wiring for hard drive.

  ======================================================

  Bug Check 0xF4: CRITICAL_OBJECT_TERMINATION

  CRITICAL_OBJECT_TERMINATION bug control has a value of 0x000000F4. This indicates that a process or thread crucial to system operation has unexpectedly is released or ended.

  Important info if you received a STOP Code

  If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  These actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  CRITICAL_OBJECT_TERMINATION parameters

  The following settings are displayed on the blue screen.

  Parameter	Description
  1	The Terminal object type: 0 x 3 : Process of 0 x 6 : Thread
  2	The endpoint object
  3	The name of the process image file
  4	Pointer to a string ASCII containing an explanatory message

  Cause

  Several processes and threads are necessary to the functioning of the system. As they are completed for some reason, the system can no longer function.

  BCCode: F4 0x000000F4<-- read="" this="">
  * 1241.html http://www.faultwire.com/solutions-fatal_error/A-process-or-thread-crucial-to-System-Operation-has-0x000000F4-

  -----------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes and displays information about all accidents of a table.
  Free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
  However, there are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Does not work
  tell all possible driver issues).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Blue error screen Stop 0X0000007E (0XC0000005, 0X8070194F, 0XF78DAC30, 0XF78DA12C) and when ejecting a CD or DVD

  Blue error screen Stop 0X0000007E (0XC0000005, 0X8070194F, 0XF78DAC30, 0XF78DA12C) and when ejecting a CD or DVD

  Said event system category 102 event 1003 error view

  Error 1000007e, parameter1, parameter 2 8070194f, parameter3, parameter4 f78da92c f78dac30 c0000005.

  Customer says that has happened for about a year.  Don't know it please help

  Hello

  Use BlueScreenView, MyEventViewer and other methods of troubleshooting BlueScreens
  See the responses in this thread - high two answers.

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/842fa8cf-535e-4b5d-9416-85eb31edbe6f

  ----------------------------------------------------------

  References to Vista also apply to Windows 7.

  This error (7th) is usually a driver problem and display adapter (video) driver is the most suspicious if
  It could be others. Antivirus/antispyware/security programs, major software and hardware (heat)
  questions can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my
  generic methods in the next message and then return to the if necessary troubleshooting tool.

  Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
  Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
  spyware/security programs.

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  BCCode: 7F 0x0000007E

  Cause

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
  interpret, you must identify which exception has been generated.

  Common exception codes are:

  0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.
  For a complete list of exception codes, see the Ntstatus.h file located in the inc directory
  the Microsoft Windows Driver Kit (WDK).

  Solve the problem
  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  Make sure you have enough disk space.
  If a driver is identified in the bug check message, disable the driver or check with the
  Reference of the manufacturer for driver updates.
  Try changing video cards.
  Check with your hardware vendor for updates to the BIOS.
  Disable the BIOS memory options such as implementing caching or shading.
  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
  (the address of the exception) must identify the driver or function that caused the problem.

  If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
  has been launched with the /nodebug switch... This problem should occur infrequently. If it occurs repeatedly,
  Make sure that a kernel debugger is connected and the system is booted with the/debug switch.

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  Hardware incompatibility. Make sure all new hardware that is installed is listed in the
  List of Microsoft Windows Marketplace tested products.
  Service system or driver faulty device. A service driver or defective peripheral system can be
  responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
  and IRQ conflicts can also generate this error.
  If a driver is listed by name in the bug check message, disable or remove that driver. Disable
  or remove drivers or services that have been recently added. If the error occurs during startup
  sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
  Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
  in Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third remote
  control program. If this software is installed, you can remove the boot of the computer service
  by using the Recovery Console, and then by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the
  device or the driver that generated the bug check 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You should also
  Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
  For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or
  Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
  BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
  space, reduce the number of files on the disk drive hard target. Find and delete any temporary
  the files that you do not have to have files hidden Internet, backup application and .chk files files that
  contain fragments of file saved to disk scans. You can also use another hard drive with more drive
  free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  BCCode: 7F 0x0000007E<-- read="">
  * 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-

  -------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes and displays information about all accidents of a table.
  Free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
  However, there are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Does not work
  tell all possible driver issues).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Need help with the Blue error screen.

  I'm having problems with the Blue error screen at startup which said "less than or equal Driver_IRQL_not. He entered the State of memory dump & black screen after that.  Nothing was abnormal after checking all the drivers in windows 7 Edition Device Manager Home premium. I'm really lost as to what causes it? My computer is a toshiba satellite laptop computer P840 pourrait-someone ' a please advise me on this matter. Thanks in advance for your patience.

  Dear Zigzag3143,

  I finally managed to fix the problem by the chance. I had discovered that this problem was caused by the sypnatics of the laptop touchpad driver. Uninstalled A & reinstall it with the correct driver from the laptop manufacturer websites. Did not expect that it is the cause of all the problems. Thank you for your valuable advice.

• Satellite L675D: Blue error screen after upgrading to Windows 8

  Hello

  I recently updated my laptop to Windows 8 Toshiba and whenever I use it, after 5-10 minutes, I get a page of the Blue error screen and restart the laptop.

  The problem is really annoying.

  I discovered that if I plug the battery charger, the phone works normally, but I want to solve the problem correctly.

  What should I do?

  I m wondering about your model of laptop. What cell phone do you have exactly?

  Regarding your question:
  I would like to get this right, with the battery it works ok, but when the AC adapter is plugged, it crashes?

  What happens when you connect the front adapter from the laptop would be turned on?

  How have you installed the Windows 8? Move the laptop Win 7 to Win 8 or have you installed Windows 8 clean system?
  Are installed all the drivers Toshiba Windows 8?

  Another idea:
  Go to Windows 8 Device Manager and uninstall the device called compatible ACPI control method battery
  Restart the machine and check how it works.

• Satellite M30: Blue error screen - how to diagnose what it is?

  I have a hardware problem, but I'm not sure of the exact nature. Even if I look like the hard drive or something to communicate with her.
  About two weeks ago, I started to notice performance problems when loading something from the internal hard drive: overall function of the computer (such as the movement of the mouse, mp3 playback) became embarrassed when the hard drive was loading (economy was less of a problem).

  This was NOT the case when loading data or execution of programs from a disk usb external hard. Today, I got a blue screen informing me that this accident was probably due to new hardware or software, followed by a physical memory dump and a severe judgment. I restarted the computer, but had the same problem after the login screen.

  Trying to boot into safe mode does not work either and after some tests it never got to the login screen more - a few seconds after the beginning of boot there was a flash of a screen blue, followed by an immediate halt.
  In any case, I used the recovery dvd - rom product but the problem is still there, which means that I can start now but I get the same blue screen every hour at least (seems to correlate with usage).

  Instead of running off to buy a new hard drive I want to be sure this is the problem (alone), and not a problem of motherboard or what have you.

  Where my question: how I can diagnose what's wrong with my laptop?

  Hello

  Well, if you n t have no experience in hardware or laptops so it of not easy to locate the fault.
  As jmatthews says you can try to check the Blue error screen. If you google around you will find also information about this error massage.

• "blue error screen", while using the web camera program

  Original title: available RAM

  I need 256 and I get a blue error screen when I try to run the program for a Logitech webcam.  How can I determine the amount of RAM available on my computer?

  Hi Bauerwoods,

  1. Did you the latest changes on the computer?
  2. What is the error message on blue screen?
  3. What is the name of the program that caused the blue screen on the computer?
  4. What is the model number of the Logitech webcam?

  See the articles below and check if it helps.

  How to set performance options in Windows XP

  http://support.Microsoft.com/kb/308417

  RAM: Add memory to your computer

  http://www.Microsoft.com/athome/Setup/addmemory.aspx

• Computer laptop crash with the Blue error screen, locale ID: 4105, BCCode: 4A

  Original title: screen blue Usb_bugcode

  NEED HELP!

  Hello world. Could someone help me please! My phone hangs with the Blue error screen, and it does on a daily basis. I tried to find a solution online but nothing seems to work. Here are the details:

  I have a laptop with Windows 7 Edition Lenovo Home premium (Service pack 1). RAM: 4 GB. 64-bit OS. Intel Core i3-3217U CPU @ 1.80 Ghz

  And here's the problem:

  Signature of the problem:

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 4105

  More information about the problem:

  BCCode: 4A

  BCP1: 0000000074EC2E09

  BCP2: 0000000000000001

  BCP3: 0000000000000000

  BCP4: FFFFF88002A84B60

  OS version: 6_1_7601

  Service Pack: 1_0

  Product: 768_1

  Files helping to describe the problem:

  C:\Windows\Minidump\043015-13057-01.dmp

  C:\Users\Jimmy\AppData\Local\Temp\WER-855899-0.SysData.XML

  Can you please put step by step directions? I'm not very good with computers, and it's really frustrating! I tried to remove and reinstall the usb drivers but that didn't do anything. I read the other threads on the similar error but couldn't find a solution. Thanks for your support!

  Could this be something to do with a monitor Samsung that I use?

  KD > lmvm sports

  start end module name

  fffff880 '075da000 fffff880' 075e2000 SPORTS (postponed)

  Image path: \? \C:\Windows\system32\Drivers\SSPORT.sys

  Image name: SSPORT.sys

  Timestamp: Fri Aug 12 00:07:32 2005 (42FBDA34)

  Sum: 0000D 894

  ImageSize: 00008000

  Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

  SSPORT.sys 32-bit Port claim Driver of Samsung Electronics

  Samsung ML-1430 series Samsung ML-1430 series USB001 unavailable

  You need to update or remove a SSPORT.sys. Zig - zag pointed out to you earlier. Please uninstall this printer and related software.

  Type device manager in the search above the Start button box and press ENTER. Find and right-click on the device and click on uninstall from the drop-down list. Restart your computer.

  Select the hotkey Windows key + R, type Appwiz.cpl and press ENTER . Place the cursor on Samsung, right-click and select Uninstall from the menu drop down. Restart your computer.

• my computer shuts down randomly and blue error screen "100000ea".

  Original title: my computer shuts down randomly and blue screen before closing down.

  my computer shuts down randomly and blue screen before closing down.

  the error message is generated after that reboot is:
  Signature of the problem:

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 1033

  More information about the problem:

  BCCode: 100000ea

  BCP1: FFFFFA800826AA20

  BCP2: 0000000000000000

  BCP3: 0000000000000000

  BCP4: 0000000000000000

  OS version: 6_1_7601

  Service Pack: 1_0

  Product: 768_1

  Files helping to describe the problem:

  C:\Windows\Minidump\071512-98311-01.dmp

  C:\Users\Paras Desai\AppData\Local\Temp\WER-767228-0.sysdata.xml

  Read our privacy statement online:

  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:

  C:\Windows\system32\en-US\erofflps.txt

  Hello

  Blue error screen is mainly related to the driver problem. However, it might be also due to hardware problems. The blue screen error message may or may not contain useful information but the file record of emptying to the smallest set of useful information that may help identify why your computer behaves as such. You can read them by installing the Windows debugging tools and follow the instructions in this article.

  How read partial memory dump files that Windows creates for debugging:

   

  http://support.Microsoft.com/kb/315263

  Note: The article mentioned above also applies to Windows 7 full version.

  Or post the screenshot us for clarity on the issue.

  Consult the following link which contains information about how to download files mindump:

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

   

   

   

   

  Method 1:

   

  Step 1: Start the computer in Mode safe.

  Reference:

  Start your computer in safe mode:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

  Step 2: If you are not faced with the same problem in Mode without failure, you can do a clean boot to eliminate any influence from third parties.

  A clean boot allows you to check if startup item or services to third-party application is causing this issue.

  Reference:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:

  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.

  Method 2: This error could be due to bad video drivers, video card drivers updated on the Web site of the manufacturer.

  Reference:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3: SFC scanner.

  Reference:

  System File Checker (SFC) scan will replace the missing or corrupted system files on your computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7:

• Windows 8 freezes and gives the Blue error screen every hour approximately

  Hello guys. I have a problem with my system: windows 8 freezes and gives the Blue error screen every hour or more. usually it freezes, displays a blue error screen (clock watchdog timeout knode or not handled exception or something on a system request), I force restart it, and then it happens again (sometimes 3 - 4 times in a row, then it will be fine for another time). Here is the link to my dump leader : https://www.dropbox.com/s/uv27xr54esjlen0/MEMORY.DMP?dl... . The machine I built myself: amd fx 8350, card mother m5a97, dvd - r, 1 ssd, 1 hdd, PSU 500w, gtx 650 ti video. Also, here is a report of CPU monitor ID: https://www.dropbox.com/s/k1ma0m6maap404q/HWMonitor.txt... . I have already done all the windows, direct x updates and drivers and ran ideas
  If anyone has advice like how to do to solve this problem, please help me because I'm going crazy.

  Thank you.

  AS

  DMP file is corrupted and useless.  Please reconfigure your system for dmp files small as described in this wiki

  
  
  Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found at here

  If you have any questions regarding the procedure, please ask

  Please provide us with your administrative Event Viewer logs by following these steps:

  Press Win + 'R' and type eventvwr > enter

  Expand custom views
  Click the administrative events
  Right-click Administrative events
  Record all events in custom view as...
  Save them to a folder where you will remember which folder and save it as Errors.evtx
  Go where you saved Errors.evtx
  Make a right click Errors.evtx-> send to compressed (zipped) folder of->
  Download the .zip for Onedrive or a file sharing service file and link to it in your next post

  *

  If you have updated to win 8.1 and you get the error message " " " the system cannot find the specified file" it is a known problem.  The work around is to change the registry.  If you are not comfortable doing this DON'T.  If you are, save the key before making

  Press Win + 'R' and enter regedit

  
  Navigate to:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Channels. Delete "Microsoft-Windows-DxpTaskRingtone/analytical.

  
  

• Windows XP will not load past the Blue error screen

  Hi, wondering for a while if someone can help me...

  My xp system will not load past the Blue error screen that is displayed when the computer stopped suddenly or inadequate.

  No matter what are the measures that you choose to take (safe mode, the most recent configurations... etc) the system will just beyond the blue screen on the windows logo download page, where the loading bar moves about 10 seconds before returning to the blue loading page.

  So far I have tried to leave the computer as long as an unused months while I was abroad, remove the battery for varying amounts of time and leaving the computer as long as a day.

  In the absence of a recovery disk, I have no idea how to do to return to the form and would like to receive advice or suggest, keeping in mind I'm not a computer genius (if had'nt you may have guessed). Preferably, without losing my element pictures and videos stored on the hard drive, but it's just preference.

  Thank you, Jay

  Hello

  It does not seem good friend if the Windows operating system does not start even using safe mode, then I don t think you will be able to run the operating system without new OS reinstallation. :(

  To back up data from the HARD drive I recommend that you connect the internal HARD drive to external USB HDD controller and a backup of the HARD drive on another computer.

  Then you could try to reinstall the operating system on your laptop using the Toshiba Recovery CD

  See you soon

• Windows XP Service Pack 2 is installed correctly, and then on reboot I get a blue error screen or green

  Windows XP Service Pack 2 is installed correctly, and then on reboot I get a blue error screen or green.

  The only way that I could finally restart, was safe and then I restored to before I installed SP2.

  WinXP SP2 must have been installed more than four years ago.

  If you haven't installed SP2, you could not possibly have a functional application of the antivirus installed so see...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Follow the instructions in this post of mine in another forum (to-the-letter & in order!) to restore your computer to a State course: http://aumha.net/viewtopic.php?f=62&t=44636

  If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/xprepair/threads

  Wish I had better news for you.  Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• My Pc fires up to the home page and then the screen turns white, blue error screen

  When the screen is blank I have to manually turn off and restart several times before it will work.

  can someone help an old age pensioner please.

  Hello

  1. the question occurred once more after you've done a system restore?

  2. What is the full and exact error message?

  If you still get a blue error screen, I suggest you refer to the articles and check if that helps:

  You receive a random "0x0000008E" error message on a blue screen in Windows XP

  http://support.Microsoft.com/kb/827663