WAAS 4.5 and Citrix - real field experience, anyone?
Does anyone have experience in the field (a network of real customers, not a lab environment) of implementation of the AO Citrix on WAAS 4.5?
- What scale of optimization is achieved?
- Questions or problems?
- Is it really as seemless, as suggested by Cisco/Citrix?
- In short, it's rock?
We have more than twenty boxes of WAVE in 4.5.1. Sites running Citrix XenDesktop via a WYSE terminal see an average of 65% discount. WYSE Terminals more we more reduction seems to be. (More current data cached). XenApp traffic is optimized. We ran 4.5.1 since December 9, 2011 with no problems. We run it on SRE - 900L, 274, 474, 574, 594, 674, 7341 & a vWAAS-CM. Everything was stable.
You will need affect the classifier of Citrix ICA full optimization. (TFO/DRE/LZ).
Boring oddity in this regard is that all classifier Citrix traffic comes under the name of the desktop app "remote." So if you have RDP/3389 traffic that is not optimized and you have Citrix/1494 optimized traffic. It will be reported under the same name of the application, what makes your reports are displayed with an optimization lower. If you try to be creative and just rename the classifier of Citrix to use another name for the Application and follow, the acceleration of acceleration/monitor/ICA report will not display your ICA traffic. You must let the Citrix ICA traffic classifier keep the name of the "Remote Desktop" application and rename all the other air that use desktop remotely to something else. We used "Remote Desktop - other". Version 5 and later as 4.5.5 should solve the problem. Traffic classifier of Citrix will be marked with a unique Application name.
Hope this helps
Tags: Cisco DataCenter
Similar Questions
-
Flash CS5 glitch with setChildIndex and dynamic text fields?
Since the upgrade to CS5 to have two distinct problems.
I have a clip with 5 images. When I'm on frame 3 (main game) and I use the command setChildIndex on one on-screen element existing on the framework itself, the item in question will now be added to permenantly stage and will persist through the management remaining (end and end the game). This behavior was not present in the project until I converted it to CS5. If I remove the setChildIndex command, the on-screen elements stop their depth of sorting (as your would expect) and they bleed is more in the next section, which is at the end of the level.
I also have problems with a dynamic text field. It is currently set to don't not selectable, but when you hover over the field it shows the symbol for the pointer of your mouse cursor, and when you click it, a highlight of small block appears to the left or to the right of the field. You cannot change the contents of the field, or even select them, but if you try a small black mark selection appears at the end of the field. I destroyed and recreated this field, and the bahavior seems to remain the same.
Any other experience of these questions, or something similar with CS5?
using any actionscript code that adds a DisplayObject instance to the list of display (including the definition of its index) has always caused this behavior. which is expected.
to remove this item use removeChild() or removeChildAt().
to disable the cursor changes during a textfield, assign the property mouseChildren of the parent of the textfield property to false.
-
After the last update Acrobat, when using send & track to an e-mail recipient, I am unable to use the SPACEBAR in the subject and the content fields. Acrobat is also unstable, having fallen a few times during editing documents, specifically trying to save these changes.
I restarted my computer desk Win7 twice and it seems to make little difference.
Hi Mark,
Today we released a hotfix that resolves this problem on space/line jump does not work in the transmission and the railway. If you're not already updated to the latest patch, simply open Acrobat and visit help > check for updates to apply this hotfix.
More details about this release and bug fixes is available here: https://helpx.adobe.com/acrobat/release-note/acrobat-dc-june-02-2016.html
Please give it a try and let us know.
Thank you
-ashu
-
Hi guys,.
When you type information in a form in the DC or Pro Player I can enter text with fields of text etc and then save, close and return later to change the form. However once I use the function "Fill & Sign" to sign the document, and then save, it locks the file and all other fields become editable. Is there a way around this to remove this feature where it becomes locked and instead allows me to change the form after a signature is applied and saved. All the security properties of the form are on 'admitted', there is no restriction. Even though the document is locked all the properties remain still as 'authorized '.
The signing is FINAL. You cannot sign a PDF paper advance. Complete and save, do not sign.
-
Lock and unlock, some fields in a form
Hi, we need create a form that can be filled by a client, with the exception of a couple of fields that must be read-only. Then, we want to be able to unlock and fill, these fields when we receive the form in return by the customer.
The process should look like this:
- Client fills out the form, with the exception of the fields read-only
- Client sends the form to us
- Unlock us the fields read-only and fill
- Client gets the return form (with the read only once more locked fields)
I was googling and found indications that it is possible to achieve with javascript and a button. Is there a javascript Wizard out there who can help me?
Thanks in advance!
Set the fields read-only (or even under the name hidden) and then use a button (it can be transparent, so that ordinary users won't find it easily), with the following code:
If the fields are defined in read-only:
this.getField("Field1").readonly = false; this.getField("Field2").readonly = false; this.getField("Field3").readonly = false;
etc.
If the fields are hidden:
this.getField("Field1").display = display.visible; this.getField("Field2").display = display.visible; this.getField("Field3").display = display.visible;
etc.
-
Copy and paste multiple fields at the same time?
Is it possible to copy and paste several fields at the same time as in the employment history section or reference to an employment application?
Hello Glenn,.
You can right click on the domain and select 'Copy field' and can then slide it into position suitable in the document so that in the preview page.
Let me know if that helps!
Kind regards
-Usman
-
View running vmware and Citrix XenDesktop
Hello
Is it possible to run vmware view and citrix xen desktop on a single vmware vsphere host?
That's a test environment.
Yes it is possible.
André
-
Microsoft Application Virtualization (APP - V) and Citrix
Our company has creative cloud for teams and I'm trying to deploy the application using Microsoft App - v and Citrix Xenapp.
I followed the instructions to create a package for InDesign. I used this package to sequence the application App - v. Successfully, I can publish the application on our Xenapp server and deploy the application through Citrix.
The problem I have is when the application is launched through Citrix, the user is presented with a screen that indicates the license has expired and offers the possibility to buy, to run the test or goto the creative cloud login screen. If you click on the button to open a session, you can connect on creative cloud and the application runs as expected.
What I need if for the purposes of presenting only the logon screen without having to click on the license error screen.
A someone has encountered this problem and found a fix for this problem?
Thank you
Derek
It took a bit of debug licenses Adobe purchasing process, but we have found a solution.
When you open a session to creative cloud, a set of license information files are created for your login to c:\program files (x 86) \Common Files\Adobe\SLCache. We found that, if these files are deleted from the App - V package after sequencing, but before creating a final package, the software will ask correctly you for connection instead of bring a license expire message.
When adding the procedure described on the technet forum I could successfully the entire sequence and deploy it in a citrix environment.
-Derek
-
Get the value of the drop-down list (selectedIndex) and the text field - does not
Hi all
I'm trying to find and change the values selected by the user using a drop-down list and text field. Here's the code.
ChangeRevDetails(); function ChangeRevDetails(){ var myDialog = app.dialogs.add({name:"Enter copyright information"}); // var monthlist = col1.dropdowns.add('myList', undefined, myList); var col1 = myDialog.dialogColumns.add(); var col2 = myDialog.dialogColumns.add(); col1.staticTexts.add({staticLabel:"Month:"}); col1.staticTexts.add({staticLabel:"Year:"}); col1.staticTexts.add({staticLabel:"Rev. no.:"}); var myList = [ "January", "February", "March", "April", "March", "April", "May", "June", "July", "August", "Sepetember", "October", "November", "December" ]; var myMonth = col2.dropdowns.add({stringList:myList, selectedIndex:0, minWidth:100});//{minWidth:100}); var myYear = col2.textEditboxes.add({editContents:"2013", minWidth:100}); var MyRev = col2.textEditboxes.add({minWidth:100}); var RevMonth = (myList [myMonth.selectedIndex]); var RevYear = myYear.editContents; var RevNumber = MyRev.editContents; var RevToReplace1 = RevMonth +", "+ RevYear; var RevToReplace2 = RevMonth +", "+ RevYear + " Rev. " + RevNumber; var myResult = myDialog.show(); if(myYear.editContents == "") //entry is "" { alert("Please enter some text into the contents field."); ChangeRevDetails(); } else if(myResult == true) //user entered datas { alert (RevMonth); alert (RevYear); alert (RevNumber); alert (RevToReplace1); alert (RevToReplace2); app.findGrepPreferences = NothingEnum.nothing; app.changeGrepPreferences = NothingEnum.nothing; // grep find/change app.findGrepPreferences = app.changeGrepPreferences = null; app.findGrepPreferences.findWhat = "[\\l\\u]+?\\s?\\d{4},?\\s+[\\l\\u]+\\.*\\s+\\d+"; app.findGrepPreferences.appliedParagraphStyle = app.activeDocument.paragraphStyleGroups.item("Back page"). paragraphStyles.item("Legal_7/9"); app.changeGrepPreferences.changeTo = RevToReplace1; app.changeGrepPreferences.appliedParagraphStyle = app.activeDocument.paragraphStyleGroups.item("Back page"). paragraphStyles.item("Legal_7/9"); app.activeDocument.changeGrep(); app.findGrepPreferences = NothingEnum.nothing; app.changeGrepPreferences = NothingEnum.nothing; } else //implies user clicked cancel { myDialog.destroy(); } }
The problem is, it does not take the value that the user selects in the drop-down list and the text field. It takes the default value as "January" and the year is '2013' as these two values are given as selectedIndex:0 and editContents: "2013". I compared the coding with a few other scripts work as well, but it does not work. I added several alert boxes to check the value we get.
In addition, search for it and change also does not work. Please help me on this. Thank you.
Kind regards
Bachi. D
Change the order of dialogresults:
...
var myYear = col2.textEditboxes.add ({editContents: "2013", minWidth:100});}) var MyRev = col2.textEditboxes.add({minWidth:100});) Ditto var = myDialog.show (); If (myYear.editContents == "") //entry is «» { Alert ("Please enter a text in the content field."); ChangeRevDetails(); } else //user entered if(myResult == true) datas { var RevMonth = (myList [myMonth.selectedIndex]); var RevYear = myYear.editContents; var RevNumber = MyRev.editContents; "var RevToReplace1 = RevMonth + ', '+ RevYear; "var RevToReplace2 = RevMonth + ', '+ RevYear + 'Rev' + RevNumber;
...
did not have a look for the problem of change to find
-
Does anyone know if you are required to purchase a license for the office and Citrix, if you access Adobe Acrobat by these two methods?
The EULA from Adobe, you are allowed to install and activate the software on up to two computers, virtual or physical...
There is also a special section on this page about the products of Adobe Acrobat X on Citrix deployment.
-
copy and paste multiple fields is broken Acrobat Pro 9.2 - 9.4
I have updated forms pdf contract for over a year now using Acrobat 9 Pro, many forms with many areas. I copy the previous contract pdf fields, then paste them into the revised contract pdf and then organize the fields a little bit here and there as needed. Up to 30 fields both by the form.
Something changed last week, Acrobat 9 Pro for Windows and also Acrobat 8 Pro for Mac, both only allow me to copy and paste a field at a time now.
Versions Mac and PC worked a week or two ago. Someone please tell me this is a known issue and in the queue to be fixed.
Where can I submit this bug in addition to this forum?
THX
g
It normally works for me with Acrobat 9.4 Pro, Windows and Mac.
You see this with all the forms, or a few?
You can report bugs here: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
-
Average click boxes, and text entry fields are noted
I create several CBT intended to show users how to navigate a new software. When I record, I choose the demonstration and training modes. For the part in training mode, I have several click boxes, and text entry fields. At the present time, when the user clicks on or between text, it has to click in the right place or enter the correct answer to move forward, otherwise a failure caption appears that says something to the effect of 'should have clicked here, please try again.' They try again and go to the next slide. When the training section is marked, everybody gets 100%.
I was wondering if it is possible to create a user click in the wrong place or enter the wrong answer and still be able to advance to the next slide. So, not everyone would have a 100% automatic.
Thank you!
Mary
P.S. I should also mention that I am using Captivate 4.
Hello Mary,.
As I wrote in my first response, simulation training is not intended to be marked. You should really start with a simulation of assessment to avoid having too many change thereafter.
Have created a lot of assessments used in examinations (do not use an LMS, but this is not necessary) and my students would have been very happy if they could all have scored 100%.
Enough joking. How you have configured the settings for the click boxes, text entry boxes, buttons? I give them only 1 attempt, never show failure, success, or legends of suspicion. As both actions for success or failure, I put in 'go to the next slide. The evaluation progresses so what was the action of the user, correct or incorrect. And the score will be awarded only if the user has performed the correct action. It works fine, really. If some actions need to be repeated several times, sometimes I will put the note of some of them to 0.
Really think you can change the training simulation to work as an assessment, in the future it would be best to start with the last mode, possibly in combination with a demonstration or a training simulation.
Does that help? My assessments are in Dutch, otherwise I could send you an example.
Lilybiri
PS: Be careful with the email reports, it does not always all right.
-
I'm having issues get notifications on my iPhone and my Apple Watch. Anyone know of a solution for this?
Difficulty what for? What "issues" are you having?
-
Since the upgrade to Yosemite to El Capitan, my life is a misery! I use the software Adobe CC - well, I DID it! Nothing works anymore. I have to Forcequit all apps and nothing loads... anyone?
I have all the latest upgrades.
My operating system is El Capitan 10.11.3
I have Adobe CC 2015 Illustrator, InDesign and Photoshop. None of them will launch, open or close.
My mac is so slooooowwww. I'm sitting for 3 days I look at a spinning wheel. Can anyone help? My roof looks inviting at the moment!
running CC2015 10.11 and it is compatible with El Capitan, so the question is what else is on your system that may be the cause of the problem:
Please run a report of etrececk and post the results here
This will give us one overview of what else is running on your system
If you are currently using any anti-virus Mac you must uninstall it immediately from your system. See web developers page for instructions
If you currently use one "own my ' or 'custodian' of products you must remove them from your system immediately.
Restart and reset the PRAM
How to reset the NVRAM on your Mac - Apple Support
and in the meantime if you need to use CC I suggest you try the following
start in safe mode and run CC
Try safe mode if your Mac does not end commissioning - Apple Support
or Create a NEW account administration and the boot into that and run CC
and see if either of these procedures to help.
and if you must go on your roof with a lounge chair, some Bob Marley albums, not a note.
-
I get this error "Flight Simulator could not load some program files and will now close" - does anyone know how to solve?
Hello
I suggest you to please follow the steps described in the following articles and check if it helps.
"Invalid product key" error in Microsoft Games, MapPoint, or Streets & Trips
http://support.Microsoft.com/kb/812467
How to get a new product key for Microsoft Games for Windows, Streets & Trips, or MapPoint
http://support.Microsoft.com/kb/973457
Let us know if it helps!
Maybe you are looking for
-
How can I remove iCloud album iTunes?
How can I delete an album iCloud or iCloud songs on iTunes? I never used iCloud and never downloaded icloud, but today discovered what seems to be a U2 album in my iTunes. There is a symbol of a cloud to each song (see photo). I have never downloaded
-
while I was asleep last night my computer restarted itself, as it often does... when I woke up my avatar and mood have disappeared, the option "do not disturb", I am using has been reset to 'online' and my chat history missing for everything except 2
-
Although I've owned a mac for years, I started using Time Machine a few months ago only. For two weeks, I said that my backup disk was full. Today, I got the message that the backup failed and that yesterday was the most recent upward. a double click
-
preparation of a Macbook Pro for return to society
Hi am back my company Macbook pro that has been with me for a while and to check that I followed the correct procedure with respect to my personal data? so far, I have: deleted my folder of the computer updated the software to El Captain (from Snow L
-
Is photos deleted - possible to recover?
I inadvertently deleted my pictures when I was doing a backup. He said that it was too big for the trash while they have been erased. I restored to the previous day, but only the files have been restored. Is it still possible to recover?