Blue/Orange lights on the power button / stop does not.

Similar Questions

• Satellite P50-B-103 - light around the power button / stop does not work

  I bought this laptop a few days ago, and early on, I noticed that the light around my power button does not work.

  so now I'm in dillema it back or not?

  Everything works well, but because of the price, I expected to work correctly.

  And what is perhaps the reason for this?

  TNX

  As far as I know that the power button or to be more precise, the margin around the power button should be lit / lighted.

  In my opinion its not serious problem but if there s a problem for you and you are not satisfied with that, I recommend you contact the dealer to replace the unit.

  Greetings

• Hi all, I bought apple phone I 5s recently is the power button / stop does not. Bought in the United States, but I was shifted to the India, the works of will to guarantee in India please help

  Hi all, I bought apple phone I 5s recently is the power button / stop does not. Bought in the United States, but I was shifted to the India, the works of will to guarantee in India please help

  Ask an authorized service provider regarding iPhones, a guarantee of a country may or may not be honored in another function where you take the device.

  (143868)

• Meeting place for Dell 11 Pro 7130 power button / stop does not work

  I just bought this camera and can not get the power button to turn on the screen and off as suggested by the manual should be possible.  If I press and hold the power button then it made a stop hard and if I held down when turned off it will vibrate for a second and then turn on, but a short press does nothing when Windows is running.

  Tried short diagnostics and no problems found. Updated the BIOS to the A13, the drivers updated to the latest versions of all available installers, updated firmware screen scanner and camera. I saw a post from early 2014 with the same question where someone suggested to put it off to quick start, but that has not changed anything either. All Windows updates have been applied.

  How can I get the power button to work?

  If after trying a few things more that I decided to give at the moment and made a sweet sleep on the desktop shortcut, so I had a quick way to get at least the screen turns off. The command to execute is: rundll32.exe powrprof.dll, SetSuspendState 0,1,0

  This seems to be more than Hibernate because it should boot from the bios whenever it turns on (although the arguments given him say no to the hibernation), but it was better than nothing.

  I tested it worked a few times then rebooted the system. When I did this he decided to install updates which he said yet that all were waiting. When he started upward the power button now works.  I don't know what has changed or if the execution of the order makes a difference, but at least it works now.

• iPhone 6 s power button / stop does not work after upgrade to iOS 10

  I just upgraded my iPhone 6 s 128 GB iOS 10.0.1 and my power/sleep button has stopped working. No matter how many times he pressed or held down, it does nothing. The screenshot feature is also broken. In addition, now the home for 3 seconds button initiates a reset. Otherwise, the phone seems to work fine.

  Hello

  Try a reboot press and hold the two buttons for 30 seconds

  Until you see the apple logo.

  See you soon

  Brian

• Flashing Orange light where the Start button / stop is?

  I have an OptiPlex 3020, which was connected to an APC backup battery. The PC was on backup battery failed and off the computer. When I went to turn the computer back on it had a flashing yellow light?

  What does that mean?

  Nevermind, the problem was with my APC has no battery. When I plugged the PC on an another APC, it works fine.

• 3 peripheral USB connected to the Macbook 4.1 computer tells me to restart using the power button / stop?

  I went to record a live concert, and I need to use a single interface to record the members of the group with microphones near directly to a computer and another interface running for my model of Macbook 4.1 end of 2007, to get signals from the map of the House.

  When I plug my converter USB 3.0 AD / DA in my Macbook 4,1 - the computer sends immediately a window indicating to me to "reboot" the computer using the power button / stop. Ideas or comments about why this happens?

  I read on this forum that USB ports should work with retroactive effect, or accept USB 3.0 devices, but just use a speed 2.0?

  Thank you.

  It could be that it is a requirement of your converter AD / DA she needs to be present at a properly accessible to the OS X when startup sequence it is plugged into a USB2 port.

  Its also interesting to note that, well that peripheral USB3 can be plugged into the USB2 ports... it could be that your device may not work properly unless it is used with a port USB3... for reasons of bandwidth or even certain types of power supply.

  But to be sure...

  Which converter AD / DA are you using?

• Satellite A660 how can I turn off the light on the power button?

  Hello, I recently bought a new Toshiba A660-1FL.

  However mind, lighting of the multimedia keys, if I work in the dark.
  In the Bios, I could disable the led lighting, but the on/off switch is always lighting, which distracts me when I'm working.
  This laptop has two power LED, so the lighting power is in my view, unnecessary.

  My question is: How can I turn off the light on the power button?

  Hello

  The power button led cannot be disabled.
  It s there if the laptop is turned on.
  The lighting in the BIOS option only controls the multimedia keys...

  Welcome them

• the light on the power button does not work. How can I activate it?

  HP pavilion dv7

  Windows 7.

  the light on the power button does not work. How can I activate it?

  If the key light is not lighting up, then more than likely that the LED is just out for your power button. If the laptop is still under warranty, you can it be repaired or replaced, but as long as its not causing you any serious issues, I worry too much with it.
  
  BRAVO is just a system we use to say thank you to informative messages.

• Satellite S50T-A - button / stop does not

  Hello

  I am running Windows 8.1. After that most recent Windows Update and then restarted, the computer froze to the Toshiba start screen. Fan went into overdrive and so I pushed the power button / stop.

  Now, seems dead - button / stop, black screen, no its HARD drive is unresponsive. Only signs of life are power and battery LED on the front of the computer. Press and hold the power button for more than 10 seconds do nothing.

  Any ideas?

  Hello

  Stop switch force (hole) is available at the bottom of the laptop.
  In the case of PC freezes, do not start or a power failure, which can be fixed by pressing the power button for 10 seconds (force shutdown) and now, use the stop switch to force

  I found this info in this document of FAQ from Toshiba
  [The stop switch of strength (hole) for models with one main battery fixed | http://aps2.toshiba-tro.de/kb0/TSB3C03JR0000R01.htm]

  A short feedback would be greatly appreciated.

• Nitro V15 - button / stop does not stop is

  Hello

  I bought a Nitro V15 Windows 10 and when I press the power button, nothing happens at all. I saw that there is a "Acer power button" app installed that allows to stop or power standby extended. My power settings are defined in a way that the power button should hibernate the computer is running on battery or so that the charge. If I hold it for 3 seconds, then it requires has cut (no not a good closing) then the button works - and of course when you start the laptop, it works fine.

  How can I get the original from the rear switch functionality?

  I don't understand why the power button functionality has been removed?  We recently bought one Acer laptop (not a Nitro), and who has the same problem. So I guess it's one thing to Acer.

  Thanks for any advice in advance!

  Fiper / All,

  I just got the message that is the (indicated in bold) below Acer support team:

  "Thank you for contact Acer support.
  In regards to your concern, the settings that are currently installed on the system is the best settings to use. Basically, Windows 10 you can click the start (Windows logo) and it has the ability to shut down or restart, etc. This will allow you to close all programs before you shut down the system and avoid system problems.
  By pressing the power button for 1 second mark the system hibernate so you can still use it on a while later while all applications that you left behind are where you left them. However, if you like, you can go back to the power settings and adjust the settings (press the power button / stop) change to stop instead of Hibernate. "

  I knew only by pressing the power button for 3 + seconds force a full stop and I was not aware that by pressing for 1 second not hibernation or anything that can be defined in the power settings. It works perfectly.

  I recommended that they consider finding a way to clarify this point for Acer laptops users, like after a week of searching on Google, I can confirm that I was not not only know this one second by pressing option.

  IronFly, thanks for trying to help!

  Kind regards

  Dundy

• Start button / stop does not work

  Here's the thing:

  I bought the OfficeJet pro 8600 last year.

  Everything was ok until this month one (September 2014) after 13 months of use.

  All of a sudden the power button no longer works, I mean, I can no longer turn the printer unless I unplug him the decision-making.

  I followed all the instructions on this thread (http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/officejet-pro-8600-plus-won-t-shut-off... and have my unresolved problem.)

  Its firmware version is CKP1CN1435AR. The latest version on the HP site is CLP1CN1322CR. I downloaded it but I could not install because it presented the status does not apply.

  I would like a concrete solution from HP support. If it is a firmware issue, please tell me where I can download a functional.

  If it's a hardware problem, please tell me we can I acquire spare parts, after the warranty period has expired, can I fix it myself (I'm an electronic engineer). If you know that it's a hardware problem, you must know which component is defective and will save a lot of my work if you tell me where can I buy a new one, instead of telling me to take my printer to an HP support.

  Thank you in advance,
  Stanley

  To the right.

  Finally, I managed to find the cause of a malfunction of the power button on the printer.

  It is not necessary to connect the printer directly to the output. It is not necessary to reset. It is not necessary to update its firmware.

  When you use the printer, I noticed that when I raise the front panel by pressing the button located to the right and pulling the Panel upwards, the light on the power button is off.

  When lowered the Panel, the light on again.

  So obviously, I concluded that the operation of the power button was based on mechanical moving parts work perfectly.

  I pressed the power button and the printer still does not close. So, I pressed the front against the printer and to the left. I heard a sound like a click.

  I pressed the power button and the printer turns off again.

  I repeated the process several times with the same result.

  Then I realized that simply lower the Panel was not enough for the power button work.

  After having lowered the Panel, press it against the printer and a little to the left until it almost imperceptible click.

  In doing so, the power button works perfectly.

  I hope this can help owners of this printer, once HP has not helped.

• my computer has the power, but it does not start.

  my computer has the power, but it does not start. crancking for several minutes, after that it will quickly be able to record and then it starts again. Also, he asked once to restore to an earlier date that I did. He worked for a night, but come back to the same thing. Help!

  Hi moozer_890

  
  1 during how long have you had this problem?
  2. have you updated display drivers installed on the computer?

   

  Method 1 :
  To resolve the problem, you can see if the uninstall and reinstall then the display driver-
  Also check if you have any exclamation point or cross the marks on the sides of display devices listed in Device Manager.

  a. click Startand then click Control Panel.

  b. click system and Maintenance, click Systemand then click on Device Manager.
  Note If Control Panel is in Classic view, double-click System, and then click Device Manager.
  If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  c. in the Manager device, expand display driver, display devices, right-click and then click on Properties and on the driver tab, click Uninstall.

  d. When you are prompted to confirm that you want to remove the device, click OK.

  e. restart the computer.

  After the computer restarts, the drivers will be installed automatically.
  
  Method 2:

  If the problem persists I suggest you to check if you install the latest updated driver on the manufacturer's Web site, then check.

  You can also check out the link below and check if you get an updated video driver. You can install updates in optional updatesvideo card driver.
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  I hope this helps.

• How paste an accordion MENU navigation on a mobile scrollbar page and make it work properly? Like I can't pin, I keep it at the top of the page with scroll effect 0. It collapse, shows the menu buttons but does not close back up once reached the

  How paste an accordion MENU navigation on a mobile scrollbar page and make it work properly?

  Like I can't pin, I keep it at the top of the page with scroll effect 0.

  It collapse, shows the menu buttons but does not close back once it reaches the anchorpoint.

  Appreciate your help. Thanks.Guess I need to find another solution. Am an artist and don't know anything about coding.

• TouchSmart 610: TouchSmart 610 lights. I have a set of 5 beeps with a yellow light above the power button.

  I keep my office earlier this morning with the entry of the normal shutdown process. When I went to reactivate tonight all I get is a set of 5 beep with a yellow light flashing above the power switch. Repeat this five times then beeps stop and only yellow continuous flashing. I can hear and feel the hard drive running. I tried to unplug the power supply and then plugging, but the same thing happens. If I push and hold the power button on, it sounds like the hard drive stops and restarts. The normal blue light comes on for a few seconds then turns off and is replaced by the yellow flashing light. All you have no idea as to what may be the issue?

  Hello:

  Normally 5 beeps means there is a problem with the memory.

  I suggest that you remove and reinstall the memory modules and blow up if this doesn't fix the problem, if your PC has two memory modules, an and see if the beep disappears.

  If this is the case, remove this module and specify the first condition in you removed and if the beep begins once again find the defective memory chip.

  If it is not, remove the module and put the other in you deleted and if the ringing stops, you have found the faulty memory chip.

  Then replace the faulty memory module by one with the same specifications.

  If the ringing continues despite trying these steps, and then either the two chips of memory are bad (unlikely), or the motherboard has a problem.