Blue screen of death with the computer restarts

Similar Questions

• We had a power outage in our area, the computer was on and running, got the blue screen of death with the following: __0x000000C2, 0 x 00000043, 0xD6C61000, 0 x 00000000, 0 x 00000000 BAD POOL CALLER

  We had a power outage in our area, the computer was on and running, got the blue screen of death with the following:
  0X000000C2, 0 X 00000043, 0XD6C61000, 0X00000000, 0X00000000 BAD POOL CALLER

  If you have not saved your data and you want to start the computer with Linux Livecd such as Knoppix and copy your data files on an external hard drive. It is a precautionary measure before the step follows because things happens. ;-)

  Then do a repair installation.

  http://www.michaelstevenstech.com/XPrepairinstall.htm

  If the repair installation does not work, test the equipment to ensure that none have been damaged during the blackout and then do a clean install of Windows.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
  http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - what you will need at hand

  If all goes well, no equipment was damaged during the shutdown. Consider buying a power supply (battery backup). APC and Belkin are good; for a computer, simply spend about $60. MS - MVP - Elephant Boy computers - don't panic!

• HP deskjet 1510: blue screen of death with the installation of the printer

  I installed a new HP 1510 about 3 weeks, no problem... then there's 5 days started to have the blue screen of death (BSOD) on & above.   Several hours and attempts to update other drivers, I uninstalled the printer, did a system restore and it worked fine. No BSOD more.

  Waited 2 days, for sure - then reinstalled and the same thing all over again.  So have uninstalled and reinstalled 3 times.

  Ran malware and virus program and nothing came. At the end of my mind - help, please!

  I solved the problem by moving to a port 2.0, restore to an earlier time, and then reinstalling.

• Blue screen of Windows XP, the computer continues to restart, can't get into safe mode, will blue screen with installation as disk, can enter the CMOS?

  Restart Windows xp continues and in the end, the blue screen of death leaves the following error: 0X0000007B (0XF78D2524, 0XC0000034, 0x00000000, 0x00000000) can anyone help?

  If your machine is blue-screening after booting from the XP installation disk, it suggests that your problem is with the hardware rather than auto-run.

  I recommend taking your machine to a local service shop, unless you are confident enough rooting in the bowels of your computer.

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

• Problems with the blue screen of death (when my computer is shut down)

  I get a blue screen of death on occasion, when shutting down my computer (Windows XP, Dell Vostro). It started happening after I installed the latest version of the Synology NAS software. This is the message: BCCode: 100000d 1 BCP1: BA3F1F20 BCP2: 00000002 BCP3: 00000008 BCP4: BA3F1F20 OSVer: 5_1_2600 SP: 3_0 product: 256_1. Additional technical information: C:\DOCUME~1\admin\LOCALS~1\Temp\WER4098.dir00\Mini021112-01.dmp and C:\DOCUME~1\admin\LOCALS~1\Temp\WER4098.dir00\sysdata.xml.

  Not sure if it is related to the installation or if it is another problem. Any advice would be appreciated.

  The minidump file showed a DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1) referencing the usbccgp.sys (common class generic Parent Driver USB):

  BUCKET_ID: 0xD1_CODE_AV_BAD_IP_usbccgp+ 1f20

  The spoolsv.exe (print spooler service) is the process that crashed.

  You have recently installed a USB printer?

  In any case there may be a problem with the USB stack in Windows XP Service Pack 3 so I recommend you to install the following fix can correct a problem of 'timing' of USB that can be useful for the error you receive:

  http://support.Microsoft.com/kb/969238

  There is a link at the top of the article to request the hotfix.

  There was a driver of Synology (busenum.sys) loaded during the crash, but it does not appear to be involved in the accident.

• Safari gave me a blue screen of death, calling the Microsoft blue screen of death after installing Adobe flash player. The van is responsible for me to a Microsoft third-party technical support I did not trust anyone at - he had a problem with Adobe flash

  Safari gave a blue screen of death after downloading Adobe flash player do not have access to in-house. Big sign telling me that my computer from Microsoft was blocked and to call this number that was, according to the individual, I spoke, a third party provider working for. Microsof. Everyone knows this. I do not trust them especially when they declared they wanted to log into my calculation. Is there one resolution other than OS X Recovery?

  There are hundreds of these sites to scam out there. Nothing has been installed on your Mac, or even downloaded to. The goal of each of them should Miller get so much money that you're ready to spit. Good thing you cut them and not give them access to your Mac.

  The usual simple solution is Force Quit Safari. Hold down the SHIFT key, and then restart it. The SHIFT key tells Safari don't not to load the previous sites.

• I got the Blue Screen Of Death with Stop: 0 x 00000024 (5898 0x86D4, 0xC0000102, 0 x 00190203, 0 x 00000000)

  Original title: Help, I got the blue screen of death!

  Can someone help me please? Whenever I turn on my computer, it goes to the BSOD. I tried the last settings that worked, but he went to the BSOD too! In addition, safe mode it won't work goes to the BSOD as well. Nothing works. I have to go to a computer store to fix it, or is - it possible to fix it at home? Please help immediately!

  The BSOD I get says:

  A problem has been detected and windows has shut down to prevent damage to your computer.
  If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: disable or uninstall all utility defragmentation or anti-virus disk backup,. Check the configuration of your hard drive and check the updated drivers. Run CHKDSK /f to check for hard drive corruption, and then restart your computer. Stop: 0 x 00000024 (5898 0x86D4, 0xC0000102, 0 x 00190203, 0 x 00000000)

  Hi TheCookeNinja,

  I suggest you run the check disk (chkdsk) of the Recovery Console & check if you are able to boot to the desktop correctly.

  Step 1: To start the Recovery Console, you can follow this link.

   

  To start the computer and use the Recovery Console

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_overview.mspx?mfr=true

  Step 2: At the Recovery Console prompt, type the following command and then press ENTER:

  CHKDSK [/ p]: [/ r]

  Note: At first, try to run chkdsk/p & check if it helps. Later, you can run chkdsk/r.

  Reference:

   

  How to install and use the Recovery Console in Windows XP

  http://support.Microsoft.com/kb/307654

  I hope this helps.

• I get the Blue Screen of Death on my computer.

  Original title: Blue Screen Of Death

  A brief description of your problem or your question under the title: I am faced with the BSOD

  Complementary in the body description The owner of this computer said that it does not have anything or noticed something that can cause the BSOD move every time the computer is turned on. It takes a minute or more for the computer down, it loads correctly and the office and each program can be used before it crashes.

  Error messages that are displayed.

  Is it repeatable? It always happens. I don't have to open or something to make it happen.

  Include a description of your system, it should include information that you can find using the basic tools ( Speccy & Belarc( )

  The operating system  Windows 7 Ultimate Service Pack 1 (build 7601) 32-bit

  The processor, orCPU 2.60 GHz Intel Pentium G620, 64 kilobyte primary memory cache, cache 512 KB secondary memory, 3072 KB tertiary memory cache, ready for 64-bit, multi-core (2 total), only not hyper-thread

  Thevideo card ?

  The amount of RAM memory 4.00 GB, 3.40 GB usable

  Other devices HID compatible con device
  Control del compatible con & HID device
  Entrada (x 3) USB device
  Teclado [Keyboard] HID device
  Compatible con mouse HID
  Concentrador raiz USB (x 2)
  Compuesto USB device
  USB storage device
  (X 2) Generic USB hub
  Volumen Generico Snapa
  

  If a particular software package is the question understand the developer and version number.

  Particularly important.  What Malware (Anti Virus) you are using and what version.  I don't know at the moment, I am currently in Mode safe.

  DMP and MSinfo32:

  http://1drv.Ms/1RsSWJw or

  https://onedrive.live.com/redir?RESID=70C323F259998CA5! 1962 & authkey =! ACBVNJzmO3eqehM & ithint = the file % 2czip

  The minidump file showed a KERNEL_MODE_EXCEPTION_NOT_HANDLED_M (1000008e) stop error caused by the eamonm.sys:

  BUCKET_ID: 0x8E_eamonm+ 1487f

  ekrn.exe is the process that crashed.

  The eamonm.sys and the ekrn.exe are components of ESET NOD32 antivirus.

  As the eamonm.sys seems to be an older version try the NOD32 update to the latest version.

• blue screen of death with cold clone of the linux server

  We have an old Dell Poweredge 2550 running Red Hat 3 Server and we try to use the CD to boot more later/more cold clone to p2v it.

  It stops on the CD, and then after that it shows a loading progress bar get us a blue screen of death (bsod) with the following error

  STOP c000021a {fatal system error}

  The system process Session Manager initialization done in unexpected ways with the State of 0xc000026c.

  The system has been shut down

  It's hard to detect the controller raid PERC or something? We have since tried to use the stand-alone converter from PC software and point it to the Linux box to see if that process works a bit better, which seems to take too long.  I just want to know what happened in the case where the stand-alone converter process decides to vomit on his shoes.

  Thank you all,

  Brian

  Session manager errors are rare with PE - is the CD ok? -, it starts in a virtual machine?

  have you tried other CD of coldclone?

  This redhat machine has dark material?

  as low range or hi-end video cards

  ___________________________________

  VMX-settings- Workstation FAQ -[MOA-liveCD | http://sanbarrow.com/moa241.html]- VM-infirmary

• Blue screen of death after the update installed at startup upward.

  I have windows xp sp3 after installed updates don't know which ones, because the installed when I stop and 52 of them there I now get a blue screen of death which says:

  Stop: c000007b {bad image}

  The application or DLL? \c:\windows\system32\winsrv.dll is not a valid windows image. Please check this against your installation diskette.

  I can't go to the safe mode get the same error and same with the last known good configuration. I can't even to safe mode command prompt, system, or debug mode recovery still giving me the same error. I repaired windows 3 times already and the same thing happens each time after that some update that I don't know he messes all this. Give me advice. I have antivirus Iola system mechanic. I think just to wipe the entire disk and do a clean install if you do not have anything else to tell me I'll do it, but I don't know if that even the problem will be solved because there seems to be a problem of windows software update. I also notice from the internet explorer 7 installed it stops working a few flashes upwards on you whenever you try to open it up if it's maybe part of the problem too. I do not plan to let internet 7 install go into all this time.

  Install the updates one at a time or 5 at the time may not be a bad idea.  Then when it breaks watch you and see if one of those is eager to replace your winsrv.dll file.

  You said you DO or DO NOT have to System Mechanic configured to run at startup?  Sometimes after installation of the updates, who see the new files (and if they are obsolete), can interpret the new legitimate files to be a threat.  If you could get started and uninstall that (at least temporarily) that would eliminate this possibility of this equation of many variables.

  The Dell has a number of service tag sticker and if so what does it say?  You can search for things by service number

  You should make a bootable CD of XP (no XP media required) Recovery Console.

  You see, Microsoft support engineers won't tell you how to do this either - since there is not an article of KB Microsoft Bing and link to.

  If you have a SATA drive, which will give you another challenge because you need to maybe get into BIOS and temporarily change the disk other than SATA configuration mode so the Recovery Console will be able to see, replace the suspicious winsrv.dll file, change the SATA drive and reboot...

  First, do the XP Recovery CD of Console and if you are able to use a system of work to ensure that the CD you made at least boots (you don't have to "do" something with it), which would be a good thing.

  Here's how:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

• Blue Screen Of Death with Windows Vista

  I am running Windows Vista and after trying to update a NVIDIA Geforce driver, my computer will not start at the top and comes up with the "blue screen of death/Disconnections. Initially it started, but icons were very large and I could finally get the right size. Thought that there was a problem with the driver compatibililty and deleted driver (I think), not knowing that I would not be able to find the original driver. Restarted and it is when I got the dreaded "BSOD" and knew with my computer knowledge, I was in trouble. Tried to reboot and then restart with the Windows disk, with the same results. Past to start in safe mode, normal mode, etc... and does not boot in any mode, when eneter is pushed (of your choice) Unit acts as if it starts successfully, with the small bar down Center of screen scrolling as it should, but then the BOSD rises. Support, not much luck, worked with NVIDIA replaced card video, restarted, same result. Need help please.

  Hello

  Here's a problem similar to yours that I help a CO-OP with.

  See if it helps you too.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/unable-to-successfully-boot-syste-after-trying-to/14523396-5c88-4460-A29E-87d03fa00074

  See you soon.

• Qosmio G25: blue screen of death in the course of watching TV

  I also get the blue screen of death (Qosmio G25) and without apparent reason. I just watch a HD channel for an hour and it just hangs at random while the TV was going on. His crashed a few times before that too. But the strange thing is that I never changed anything, I just watched TV and went to the blue screen with the code everywhere.

  Does anyone else have this problem?

  Kind regards
  Stephen

  Hello

  AFAIK the Qosmio G25 was designed for the American market.
  All laptops that end in 5 are for the U.S. market.
  However, it is not easy to say why it happens.
  I assume you are using the image of Toshiba's own operating system.
  I checked the driver Toshiba U.S. page and found a few drivers.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_modSel.jsp?

  You can check that you have installed driver TV tuner driver and BIOS versions.
  Maybe a BIOS update will help you.

  But the blue screen of death is usually due to the fault of hardware or software serious dysfunction.

• Blue screen of death with BCCode: 116

  Hello

  Recently, I started receiving a lot of DBO. I usually get it after watching a video.

  Here are the details that I received on the subject.

  Signature of the problem:

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 1033

  More information about the problem:

  BCCode: 116

  BCP1: FFFFFA800CDFE010

  BCP2: FFFFF8800435B738

  BCP3: 0000000000000000

  BCP4: 0000000000000002

  OS version: 6_1_7601

  Service Pack: 1_0

  Product: 768_1

  Could someone give me some suggestions in how to solve the problem?

  Thank you

  Lisa

  Original title: blue screen of death

  for been link... duh!

  https://onedrive.live.com/redir?RESID=1B529A733D6D2EB3! 148 & authkey =! ALPyIEgs1AIRK5Q & ithint = % 2chtm

  Lisa

  Lisa

  No worries I do it all the time.

  These accidents are related to your video driver (yours is 2012) I remove it and install the driver on most recent available (at least 2014 if not most recent)

  

• New pc get a blue screen of death on the second day

  minidumb of the https://www.mediafire.com/?vgl8td4pz34t6zp file

  Hi, my name is khalid I just bought a laptop from HP Envy 15 15 - j002ex of the local store in Saudi Arabia.

  IM on windows 8.1

  the second day I bought this laptop I get problems with wireless screens and the blues of death.

  and now I get blue from different mistakes as screens:

  • CARNIANI driver corrupt
  • bad pool header

  I've had so many blue screens its boring

  I took the pc in the store they said it would take 2 weeks to diagnose the problem and it's too long I need the laptop for exams and finals.

  I really need your help, thank you

  Hi TeeShirtArtist,

  I saw your post on the BSOD and I'll be happy to help you. With the error you found it is usually connected to a corruption of driver any. There are two things that you can take a look. First, go to your device manager and uninstall a device at a time and restart your computer, and which causes Windows to check for an update and install it. Do this for all devices in the Device Manager.

  The other method is installed the drivers from HP web page. I have the link below. Again, I recommend to make a time to see if you still get the BSOD.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4158&LC=en&cc=us&DLC=en&sw_lang=&product=6545666

  Thank you

• Blue screen of death and the message to STOP 0 x 00000019

  I looked at the answers to the questions on the blue screen error stop 0 x 00000019 but nobody seems to not have exactly the same message I receive. I imagine that in the media, the details are specific to each problem. My message is STOP: 0 x 00000019 (0x00000020, 0X84DEBD40, 0X84DEBD58, 0X1A030001) and occurs whenever I try to access my CD/DVD drives. Once I've extracted the disc and turned off I can restart the computer as usual. The message does not seem to be recognized by MS Help lines. Someone at - it ideas please?

  Hello
   
   
   
  1 does when a particular CD is in the drive?
   
  Let us, uninstall and reinstall the DVD/CD drive and check.
   
  Method 1.
  a. Click Start, click Run and then type devmgmt.msc and press ENTER.
  b. in Device Manager, go to the CD/DVD drive and right-click on it.
  c. choose uninstall.
  d. restart the computer and check.
  Note: It will automatically re - install the drive during the reboot.
  Reference:
  How to manage devices in Windows XP
  http://support.Microsoft.com/kb/283658
   
   
  Method 2.
  Also, I would ask allows you to verify that the event viewer records on this issue.
  Reference:
  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.