blue screen STOP: 0x0000007E

Similar Questions

• Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please

  STOP: 0x0000007e (0xc000001d, ox8537008 0xba4c3508 0xba4c3204) and the system would not come to the top.

  Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please

  Symptoms: Booted computer, loaded the raid drivers and showed at the start screen XP for half a second then to BSOD with a Stop error Code 0x0000007E - see also a lot of users (0xC0000001D, 0 x-, etc.) as well.

  Solution:

  1 boot from your Windows XP CD and start the recovery console. You may need to press F6 while RC loads in order to load the SATA drivers. you will have a prompt c:\WINDOWS to the console.

  2. type: CD $NtUninstallKB977165$ \spuninst (it's the update, I had to uninstall to get out of the boot loop, other updates can be uninstalled by changing the name of the directory to $NtUninstallKBCODE$, where KBCODE is the code KB)

  3. type: BATCH spuninst.txt

  4. type: exit

  Don't forget to configure your system to boot from the HD before resuming. I hope this helps. Saved me a lot of hassle today.

  -Tom Steele
  http://www.hawkandtom.com Tom Steele

• The installation blue screen: STOP: 0x0000007E (0xC0000005, OxF748E0BF, OxF78DA208, OxF789D9F08,

  Original title: cannot format the new hard drive because when I boot the system disk it stops with several STOP error.

  I am trying to solve problems with desktop Dell XPS 420 of my daughter. He started with the message 'bootmgr' trying to get the windows computer.  She ordered a new hard drive and when it was physically connected, I put put in place the disc in the computer to boot from to install windows XP, but it always comes to the blue screen with the following error: (I'm not an expert on computers so that any help must be in a very basic language).
  STOP: 0x0000007E (0xC0000005, OxF748E0BF, OxF78DA208, OxF789D9F08,
  PCI.sys-address F748E0BF base at F7487000
  DateStamp 3b7d855c

  I retried the boot and got the same error.  I check the forums online and they suggest that to go in safe mode.  I can't go in safe mode - do not have an operating system installed yet.  Some have said to change organic caching and shadowing.  I don't know how to do and I can't get into safe mode.  I don't know what to do.  Of course, the warranty was out - 2008 computer.

  Can anyone help or point me in the right direction? My funds are limited to pay Dell for the solution.  Thank you.

  MDT? Does not look good. See:

  http://www.computing.NET/answers/hardware/MDT-hard-drive/23869.html

  I still don't understand why you think that you need a new hard drive. There is nothing prevents you to install own XP on the old disk.

  If you can't find the right drivers (I don't know where to find them), maybe you can get in Dell's BIOS and change the hard drive controller affecting IDE or legacy or something like that. Then the new disc would work.

  Or you can simply put the back of an old man. You can either try to repair your installation of Windows with our help or opt to perform a clean installation.

• After the updates of Windows a blue screen * STOP: 0x0000007E

  After running only a full windows update tonight. When the machine booted up back came to a blue screen with the message next stop:

  STOP: 0X0000007E (0X805C49B8, 0XF7A742B4, 0 X 80000003, 0XF7A73FB0)

  After running through the diagnostics on all very well control, e.g. hard drive, memory, video, hardware, etc...  I can't start in safe mode, a previous state, whatever it is.

  I'm at a loss complete as to what I can do.  Any help would be greatly appreciated.

  Thank you

  Mark

  After running only a full windows update tonight. When the machine booted up back came to a blue screen with the message next stop:

  STOP: 0X0000007E (0X805C49B8, 0XF7A742B4, 0 X 80000003, 0XF7A73FB0)

  After running through the diagnostics on all very well control, e.g. hard drive, memory, video, hardware, etc...  I can't start in safe mode, a previous state, whatever it is.

  I'm at a loss complete as to what I can do.  Any help would be greatly appreciated.

  Thank you

  Mark

  UPDATE:

  I ended the disc of Windows running in the repair mode, and it fixed the problem.  Fortunately, no files have been lost!  And I started a return costs upward as well ;)

  I hope that the update will be fixed soon.

• Unable to start - blue screen STOP: 0X0000007E

  original title: STOP: 0X0000007E (0XC0000005, 0X89B16963, 0X8B76B87C, 0X8B76B578)

  I was working on my laptop Acer Aspire and suddenly my restarted windows and then leave her unable to start and just show a blue screen with the error code as STOP: 0X0000007E (0XC0000005, 0X89B16963, 0X8B76B87C, 0X8B76B578).

  I tried to run in safe mode, then even I tried all the options available in the Advanced menu to restart that we get after pressing F8 but just fails. Repair of the system showed the error Impossible to repair in the same way his unable to restore and unable to start with last successful boot setting.

  Kindly let me know what to do I have lots of important data in my hard drive that I don't want to lose.

  Hello

  Unless the drive itself is completely fried the data on disk can be recovered by putting the hard drive
  in another computer as 2nd or a case of external hard drive using a USB connection - then the data
  likely to be backed up or copied to other media.

  Of course, the major problem is that the system does not boot even in Safe Mode.

  Setup/settings (BIOS/CMOS) often F2 so screen shows that it boots CD/DVD on the 1st in the boot order-
  Start with a Windows 7 disc and try the Startup Repair tool. Also, try restoring the system from there. (Don't forget to)
  Set the boot order to when.)

  Those who cannot not helped at all and will need you the help of a real computer store (no leeks and)
  Displays a BestBuy or other stores) or system manufacturer support.

  =================================================================

  Here are the usual methods to troubleshoot the bluescreens if you have access to some and still have a
  problem.

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot the BlueScreens - top 3 answers.

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  -----------------------------------------------------------------------------------------------------------------

  The system has RAID? If so, it is very suspicious.

  This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
  may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
  can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
  methods in the next message and then return to the if necessary troubleshooting tool.

  Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
  Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
  spyware/security programs.

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  BCCode: 7F 0x0000007E which is also 0x1000007E

  Cause

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
  interpret, you must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

  For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
  the Microsoft Windows Driver Kit (WDK).

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the
  • Reference of the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
  (the address of the exception) must identify the driver or function that caused the problem.

  If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
  has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
  Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  • Hardware incompatibility. Make sure all new hardware that is installed is listed in the
  • List of Microsoft Windows Marketplace tested products.
  • Service driver or defective peripheral system. A service driver or defective peripheral system can be
  • responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
  • and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable
  or remove drivers or services that have been recently added. If the error occurs during startup
  sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
  Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
  in Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third remote
  control program. If this software is installed, you can remove the boot of the computer service
  by using the Recovery Console, and then by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the
  device or the driver that generated the bug check 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You should also
  Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
  For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or
  Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
  BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
  space, reduce the number of files on the disk drive hard target. Find and delete any temporary
  the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
  contain fragments of file saved to disk scans. You can also use another hard drive with more drive
  free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="">
  * 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-
  -------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes and displays information about all accidents of a table.
  Free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
  However, there are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Does not work
  tell all possible driver issues).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows 7 clean install fails with ACPI.sys and error blue screen stop: 0x0000007E.

  I'm trying to do a clean install of windows 7 Professional (32-bit) on my laptop ASUS X61SL. Initially there was Vista Home Premium (32-bit) running on this laptop.

  After the start of the boot and windows 7 by loading files and starting windows comes the blue screen saying:

  STOP: 0x0000007E (0xC0000420, 0x8EB256C6, 0x8A386640; ox8A386170)
  ACPI.sys - address 8EB256C6 base at 8EAD7000, Datestamp 4CE78F21
  I tried an update of the BIOS already and a full erase of the disk which has been recommended by the ASUS support. Nothing worked, and not even the ASUS support has other ideas how to get Windows 7 to run.

  OK, how much RAM have you?

  I found this information:

  However, I remembered seeing something on the Internet about Microsoft 64-bit being unhappy with 4 GB of ram during the installation process of the systems... .then I got 2 GB of ram and the installation went OK! I will give the memory later.

  Source:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/a-clean-install-of-win-7-fails-with-acpisys-and/edca086c-D798-4b78-805d-301dcc8535a0

  I know - you try to install the Win7 SP1 32 bit only, but you can try it.

  LC

• Whenever I start my computer, I get a blue screen STOP: 0X0000007E.

  I have Windows Vista Home Premium on an IBM Thinkpad T60p.

  I can start my computer in safe mode and log on and use some applications.
  Sometimes I can access the login (in normal mode) screen, sometimes even not far away.
  I get the error code is always:
  STOP: 0X0000007E (0XC0000006, 0X81CFFB72, 0X8B5BA930, 0X8B5BA62C)
  Please tell me how to fix this or that Microsoft help me.

  Could be a nuisance pilot. Update your drivers manually looking at system manufacturer and
  Sites of the manufacturer of the device.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Im trying to install windows XP on a hard disk nine and im getting a blue screen Stop: 0x0000007E

  Stop: 0x0000007E (0xC0000005, 0xF748E0bF, 0Fx78DAZ08, 0xF78D9F08)
  PCI.sys - address f748E0BF base at F7487000, Datestamp 3b7d855c

  Hi martydh,

  Thanks for posting. This message is often caused by incompatible hardware. Please remove and unnecessary for PCI cards, cards AGP/PCI-E, external devices and use only the minimum amount of RAM you can. After doing this please try reinstalling the operating system. Also check with the manufacturer of your motherboard OEM or PC to see if it's updated controller drivers, that you can use.

  I hope this helps! Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Blue screen - Stop: 0x0000007E (0xC0000005, 0xF77AF756, 0xF7A0A430, 0xF7A0A12C)

  Original title: need help with Stop: 0x0000007E (0xC0000005, 0xF77AF756, 0xF7A0A430, 0xF7A0A12C)

  Can someone telll me how fix an error that says "Stop: 0x0000007E (0xC0000005, 0xF77AF756, 0xF7A0A430, 0xF7A0A12C)"?

  If the message under your STOP error message indicates this (probably not):

  WUSB54GCx86.sys - address 92 D 89498 base at 92D7c000, Datestamp 45c04cc9

  So the response from Microsoft support technician can help you.

  If the message under your STOP error message indicates this (most likely):

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED

  So the response from Microsoft support technician is not worth reading.

  If this is the case and you have an AMD processor, you must look at this article:

  http://support.Microsoft.com/kb/953356

  If we knew what was your system brand and model and a few other details when you made your initial post or someone have asked a few questions, you would have probably solved this problem in one or two cycles of message, but now 6 days.

  It is the shame that the MS Answers forum does not ask for any kind of information system when a new question is asked and we know absolutely nothing about your system.

  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

• Blue screen: STOP 0x0000007e (0xc0000005, 0xb585d083, 0xba4c74ac, 0xba4c72a8)

  Original title: STOP 0x0000007e (0xc0000005, 0xb585d083, 0xba4c74ac, 0xba4c72a8) an idea how to solve this problem?

  Working on a dell desk top... no idea how to solve this problem?

  Perhaps the problem then. SP3 was recently installed on it? If it was you have to maybe do this

• Blue error screen Stop 0X0000007E (0XC0000005, 0X8070194F, 0XF78DAC30, 0XF78DA12C) and when ejecting a CD or DVD

  Blue error screen Stop 0X0000007E (0XC0000005, 0X8070194F, 0XF78DAC30, 0XF78DA12C) and when ejecting a CD or DVD

  Said event system category 102 event 1003 error view

  Error 1000007e, parameter1, parameter 2 8070194f, parameter3, parameter4 f78da92c f78dac30 c0000005.

  Customer says that has happened for about a year.  Don't know it please help

  Hello

  Use BlueScreenView, MyEventViewer and other methods of troubleshooting BlueScreens
  See the responses in this thread - high two answers.

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/842fa8cf-535e-4b5d-9416-85eb31edbe6f

  ----------------------------------------------------------

  References to Vista also apply to Windows 7.

  This error (7th) is usually a driver problem and display adapter (video) driver is the most suspicious if
  It could be others. Antivirus/antispyware/security programs, major software and hardware (heat)
  questions can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my
  generic methods in the next message and then return to the if necessary troubleshooting tool.

  Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
  Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
  spyware/security programs.

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  BCCode: 7F 0x0000007E

  Cause

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
  interpret, you must identify which exception has been generated.

  Common exception codes are:

  0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.
  For a complete list of exception codes, see the Ntstatus.h file located in the inc directory
  the Microsoft Windows Driver Kit (WDK).

  Solve the problem
  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  Make sure you have enough disk space.
  If a driver is identified in the bug check message, disable the driver or check with the
  Reference of the manufacturer for driver updates.
  Try changing video cards.
  Check with your hardware vendor for updates to the BIOS.
  Disable the BIOS memory options such as implementing caching or shading.
  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
  (the address of the exception) must identify the driver or function that caused the problem.

  If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
  has been launched with the /nodebug switch... This problem should occur infrequently. If it occurs repeatedly,
  Make sure that a kernel debugger is connected and the system is booted with the/debug switch.

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  Hardware incompatibility. Make sure all new hardware that is installed is listed in the
  List of Microsoft Windows Marketplace tested products.
  Service system or driver faulty device. A service driver or defective peripheral system can be
  responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
  and IRQ conflicts can also generate this error.
  If a driver is listed by name in the bug check message, disable or remove that driver. Disable
  or remove drivers or services that have been recently added. If the error occurs during startup
  sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
  Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
  in Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third remote
  control program. If this software is installed, you can remove the boot of the computer service
  by using the Recovery Console, and then by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the
  device or the driver that generated the bug check 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You should also
  Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
  For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or
  Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
  BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
  space, reduce the number of files on the disk drive hard target. Find and delete any temporary
  the files that you do not have to have files hidden Internet, backup application and .chk files files that
  contain fragments of file saved to disk scans. You can also use another hard drive with more drive
  free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  BCCode: 7F 0x0000007E<-- read="">
  * 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-

  -------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes and displays information about all accidents of a table.
  Free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
  However, there are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Does not work
  tell all possible driver issues).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• A blue screen (Stop error) has been reported. The message contains the error details.

  Hello Hello.
  can someone help me why this error is coming.
  I use a laptop lenovo.
  Error details:
  product-windows stytem, operating
  ID-1003,
  source-system error,
  version - 5.2.
  sysmbolicname-ER_KRNLCRASH_LOG,
  error code %1, %2 parameter %3, parameter3 %4 parameter 4 %5 2 parameter1

  A blue screen (Stop error) has been reported. The message contains the error details. An event with event ID 1001 might also appear in the event log. This matching event displays information about the specific error that occurred.

  Concerning

  Chandra Murali

  .net developer,

  HYD.

  Hi Murali,

  ·         What is the random question?

  Try the following.

  Method 1: Check for memory questions

  Microsoft Online Crash Analysis - windiag

  Method 2: Updated with the latest chipset and other computer device driver updates. Log in the Web site of the manufacturer to do the same thing.

• Windows xp blue screen stop: 00000024

  Title: original windows xp blue screen

  had a blue screen with stop:

  Hi steveshepherd,

  (1) since when are you facing this problem?

  (2) remember to make changes?

  (3) what happens when you insert the Windows XP CD?

  You can follow the steps provided by Karena R in the link below, which relate to this issue

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/blue-screen-stop-error-0x00000024-while-booting/196033b0-fbe9-45dd-abbf-889291d0d133

  Kind regards

  Ajay K

• Blue screen stop: c00002 / a (fatal system error)

  Blue screen stop: c00002 / a (fatal system error)

  the windows login process ended unexpectedly with status 0xc0000005 (0x00000000 0x00000000) the system has been shut down.

  I have dell windows XP home service Pack 3 computer.

  I had a problem with security thinkpoint and called microsoft and after they had me take measures running a couple different scanshttp://live.sunbeltsoftware.com/download VIPRERescue andwww.eset.com virus more microsoft had click me start, run and type in the press temp ok delete all files, run and type prefetch and delete all the files, run %Temp% remove all the files then empty the trash restart and everything should be ok.

  the computer starts fine until I stopped and tried it begins again, same blue screen problem, I went to safe mode and don't start running and temp, prefetch and %Temp% remove empty the Recycle Bin and restart and computer ran fine, after the 2nd screen blue again.

  I'm now working on the computer and if I press start, run make temp, prefetch and % temp % and delete and empty the trash before turn me computer turned off it will start very well, if I don't do the temp, prefetch and %Temp% steps that I will get the blue screen at the start.

  How can I solve this problem and get rid of the blue screen for good message?

  Hi C_O_A_C_H_11,

  Perform the last known good and then restart your computer and check if you receive the error message. You can check the link below:

  How to start your computer by using last good known Windows XP Configuration:http://support.microsoft.com/kb/307852

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• blue screen * STOP 0x0000000A in Windows XP

  blue screen error message: * STOP 0x0000000A (0xFF1701F0. 0 x 00000002, 0 x 00000000, 0x80536A1C) win xp home edition

  Around my house (less than 100 feet I can't use / the view high tower or net - only 'safe mode' whenever I start it (under each variable with or without battery) I get the error message blue screen (see above) - outside of the area of 100 feet, lap top works fine... perfect, starts every time;) HP lap top xp home ed works very well... (I can't use it at home or within 100 feet of my house via especially blue screen message)

  blue screen * STOP 0x0000000A (0xFF1701F0. 0 x 00000002, 0 x 00000000, 0x80536A1C) xp home ed

  You get the following BSOD:

  Bug Check 0xA: IRQL_NOT_LESS_OR_EQUAL

  This indicates that Microsoft Windows or a driver in mode accessed kernel memory paged at DISPATCH_LEVEL level or above.

  Please download the files dmp from the Windows\Minidump on your Skydrive folder (copy the dmp first on your desktop, otherwise you can not download them) and post a link here, so that we can look at landfills. Perhaps we see the cause.

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/