Blue tooth problems

Similar Questions

• blue tooth problems "Code 43" HP Envy Touch Smart 17

  I have a HP Envy Serial [edited by Moderator] product EBA11VA #ABA. I can't connect to my phone via blue tooth. I tried to download the latest driver, and when I go into my control panel and check it out, it reads,

  Intel® wireless Bluetooth® 4.0 + HS adapter

  Windows has stopped this device because it has reported problems. (Code 43)

  Can someone help me please?

  Thanks in advance.

  Excessive salvation,

  Welcome to the HP Forums!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you have a problem with Bluetooth.  I suggest you The HP Support Assistant to ensure that all updates are done running. Here is a link to the driver for your system and software page. HP ENVY 17-j070ca Notebook PC drivers. You will need to select your OS that you did not give it and click Next.  Now click on the network. Download the driver appropriate for your system and install.  If the problem remains, open the device handle and right-click on the Bluetooth adapter. Uninstall, now scan the events for the hardware changes, this should install the latest driver for it.

• BlackBerry Smartphones Arggggh please help me! Blue tooth problem, no one seems to want to answer.

  I checked online for any available information, and this is my last resort.

  I have a hands-free kit car Blue Ant ST3 Bluetooth paired with my Blackberry Torch 9800. Before that, I had a Blackberry 9000 "BOLD" paired with it. The BB "BOLD" to reconnect with the ST3 unit as soon as he came into the range. I swear blind that the torch too did for on the first week I got it. My ISP (Vodafone Australia) Blackberry support centre now tells me, it's NORMAL that every time I want to connect my unit ST3, that I have to turn off Blue Tooth, on the Blackberry Torch and then turn it back on so that it will connect. Certainly, it cannot be good. Is it?

  My phone says I have the latest firmware and OS available too BTW.

  TIA,

  Biggy.

  BT Goto in connection and selecrt your device, see if it is confidence

• iPhone 5 s to connect with blue tooth in the car for hands-free calling does not connect to the speaker, it works very well with the iPhone 5. How to solve this problem?

  IPhone 5 IOS 9.2 (13 c 75) I can log in my car with Blue Tooth to make phone calls, but it does not connect to the speaker. To establish the connection with the car, the procedure has been completed correctly. With the iPhone 5 it works perfectly correct.

  How to solve this problem? Is there someone who has the same problem?

  Howdy,

  Thank you for using communities Support from Apple.

  I see you try to get your iPhone to interface with the stereo in your car via Bluetooth.  For setting this up, please follow the steps below.

  If you use Bluetooth

  1. Consult the user manual of your car stereo to get the procedure to a Bluetooth device.
  2. On your iOS device, drag up to open Control Center, then press ontwice to turn on Bluetooth and turn it back on.
  3. Restart your iOS device.
  4. On your iOS device, Cancel the twinning of your car radio. On the screen of your car désapparier your iOS device and any other device. Restart your car and your iOS device, then pair and connect again.
  5. Update your iOS device.
  6. Install the updates to the firmware of your car radio.
  7. If you still not connect, contact Apple technical support.

  Help to connect your iPhone, iPad or iPod touch with your car radio

  See you soon.

• Inspiron 5720 Blue tooth audio problem

  I tried two different audio devices to connect to my 5720, the most recent being a TDK Sound Cube V513. The device is installed, but there is no playing audio through the cube.

  I could send sticking to my cell phone and my blue tooth mouse works fine.

  Any suggestions?

  Hi lgehring,

  Ask you to try following the underside of measures that could help:

  1. click on start

  (2) system in the search box and press on enter.

  (3) in the Device Manager, Bluetooth radio detection screen.

  (4) then right-click on Bluetooth, then uninstall it.

  Note: If Bluetooth is not here then there may be under other devices with a yellow exclamation point, which means that the driver must be installed correctly so uninstall isn't necessary

  (5) now you can use the link and update drivers Bluetooth:

  http://Dell.to/193rqWx

  Select the right operating system and download Bluetooth drivers under the network tab according to the type of wireless card.

  Do not respond with your findings.

• Blue Tooth Mouse pairing attempts failed on Mac mini after several months of service

  Hello support team,

  My attempts pairing Blue Tooth Mouse (for my "Easy blue Typhoon" made in Germany) are retained is NOT on my Mac mini once I used the 'Typhoon BlueEasy' mouse for several months in good pairing function combined with my Mac mini.

  Already I changed the batteries (which are not emptied) for rechargeable batteries (filled 100%) now - but this does not solve the problem of coupling:

  

  The easy blue Typhoon is not damaged/broken - it works fine on my other devices.

  I think that all of a sudden the 'mini Apple Mac system' blocked matching by some unknown reason.

  Jona li

  -

  You said "it works well on my other devices".

  The other device are on and have Bluetooth turned on?

  If the mouse BT is pairing with other devices?

• Pavilion 2 detachable x: no blue tooth not more. Win 10 of Pavilion x 2

  
  

  Remove the Chuck and let windows find and reinstall a driver

  solved my problem with the blue tooth. It is back and functional!  With one Advisor to Mrstenter in another case,

  This problem is solved!

  Strange as if little has changed in the way Windows resolves its problems since the mid-90s, when I was an active windows user. Brute force seems to be the solution to everything.

  Thanks Mrstenter.

• Blue tooth with Sony headphones

  My headset to connect with my Dell desktop computer, but not with my HP pavilion laptop. The two are running Win 10 updated

  Bought and installed Blue tooth USB ADAPTER. problem solved

• Pavilion g6 2320 tx: I can't send files on blue tooth

  my laptop model is pavilion g6 2320 tx. The factory installed OS has been version.later for 64-bit windows 8 I updated my os to 64-bit windows windows store 8.1 version. After the update I can't send all files on blue tooth on the other equipment, but I can receive files from other devices.

  I tried to reinstall the driver but it has not resolved my problem.what should I do?

  Hello:

  See if the latest version of the driver W8.1 BT works for you...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-139921-1&cc=us&DLC=en&LC=en&JumpID=reg_r1002_usen_c-001_title_r0014

• connect my lack of headset blue tooth, shows ofline but not pared, no signal

  my Bluetooth headset want to play he matched it still shows no signal, blue tooth mouse works

  Hi John,.

  To help you better, please answer these questions:

  1 operating system Windows are you running?

  2. what happens when you try to connect the Bluetooth headset with the computer?

  3 you get a specific error message?

  4 did you do changes on the computer before the show?

  I suggest you follow the provided methods to solve the problem.

  Method 1: Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method2: Remove and reinstall the device:

  1. click the Start button, select Control Panel, click hardware and soundand then click Bluetooth devices.

  2. Select the device that does not work, then click on remove.

  3. click on add, press the reset button on the unit (or make it discoverable following the manufacturer's instructions), check the box my device is set up and ready to be found and then click on Next.

  4. If the device is not found, repeat the previous step. When the device is found, select it, and then click Next.

  5. follow the remaining instructions in the wizard.

  6. make sure that the device is on and that the batteries should be replaced.

  7. make sure that your computer's Bluetooth adapter is attached and put on the market, and that the device is turned on and discoverable. If you don't know how to turn on discoverability, read the instructions provided with the device or check the manufacturer's Web site.

  ·    Make sure that you have installed the device using the appropriate program. If this isn't the case, reinstall the device.

  Note: also update the latest drivers.

  See the following links for more information:

  Add a Bluetooth device to your computer

  
  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  Connect to Bluetooth and other wireless or network devices

   

  http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

  Change settings for a Bluetooth compatible device

  
  

  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device

  If you need help with the Windows operating system, just tell me and we will be happy to help you.

• I cannot connect hp pavilion labtop 2000 fx for I - Phone 3 16 GB via blue tooth

  I cannot connect hp pavilion labtop 2000 fx for I - Phone 3 16 GB via blue tooth

  and not even with connection cable USB

  Hi removed Abu Qorah,

  1. are you able to connect the iPhone to other phones or another computer via Bluetooth and usb with no problems?

  2. you receive messages or error codes?

  You can see the Apple support article and see if it helps:

  iOS: device not recognized in iTunes for Windows

  Hope this information is useful.

• Headset blue tooth error Windows 7

  Hello, I was wondering if someone could give me some advice. I can't get my blue tooth headset to work with Windows 7... It tells me that I must get the drivers, but when I try Windows update it says I'm current and the site Web of the manufacturer told me that generic drivers Microsoft blue tooth should work. Blue tooth module working properly and put the head works with my other Vista computers, I am at a loss of ideas. I also tried to install the Broadcom drivers after reading similar problems being laid down by these acts, but the head game still does not work. The head set connect and appears under devices, but the icon of troubleshooting... I think that's all I can remember at the moment, any help or ideas on how to solve this problem would be greatly appreciated...

  Thank you

  P.s. I'm sorry if this is a repeat post, but I saw all the others like it in my search

  Post here for assistance, please: http://social.answers.microsoft.com/Forums/en-US/w7hardware/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows xp blue tooth detects the keyboard and the mouse, but immediately removes both

  Just installed windows xp and having trouble with the blu-tooth now the keyboard and mouse

  Hi Bruce,.

  1. What is the brand and model of your keyboard and bluetooth mouse?

  2. What Service Pack is installed on your computer?

  If you have Service Pack 2 installed on your computer, I suggest you to follow the steps from the link and check if it helps.

  How to troubleshoot Bluetooth detection and connectivity issues in Windows XP Service Pack 2

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

• My laptop computer blue tooth is not working...

  Hello

  I hava hp g62-363tu notebook pc with win 7 64 bit. the bluetooth icon is shown on tast bar but its not found or search no matter what cell phone blue tooth its drivers are perfectly set up and its bluetooth hardware id is BTH\MS_BTHPAN. can someone tell me why is this. It is a hardware or driver problem?

  Hello

  Uninstall the bluetooth drivers and restart the computer... After reboot, you can download the drivers again, but I don't know what bluetooth adapter you have in the laptop... To address this directly to run Windows updates and check.

  After the windows updates you can also run HP Support Assistant for pending updates...

  Here is the link to download the drivers... most likely the broadcom bluetooth...

  Broadcom 2070 Bluetooth Software and Driver

  Ralink/Motorola Bluetooth adapter driver

  Here's another Post that will help you find the appropriate hardware id...

• Blue Tooth devices send this: "an error occurred while Windows saves your settings..."

  When I click on the check box "Discover tour in the Blue Tooth devices of control panel section, it returns a message error"an error occurred while Windows saves your settings'... and the box will not remain. Try to connect to a Palm tree for blue tooth. What should do?

  Hi SirEverCiber,

  Follow the steps in the section "Advanced troubleshooting steps" in this article to resolve the problem:

  How to troubleshoot Bluetooth detection and connectivity issues in Windows XP Service Pack 2

  Note: The steps in this article are applicable to the other Service pack versions of Windows XP as well.