Windows xp blue tooth detects the keyboard and the mouse, but immediately removes both

Similar Questions

• HP 860-NL100 want Phoenix Desk: 860-NL100 HP Envy Phoenix office not detect a keyboard and a mouse

  Hello
  Why when I try to install windows 7 64 - bit PC does not recognize the keyboard and mouse?

  The place in the bios they work properly.
  Thank you Marco.

  Spoiler (Highlight to read)

  Thank you

  Spoiler (Highlight to read)

• Windows 7 system can detect the mouse click event

  Hi, I have a user with a fresh install/update of Windows 7 64-bit. For some strange reason, it continually records clics.2 seconds in duration. We tried to restart, replacing the mouse and even unplug the mouse entirely without any change in behavior. Anyone know what may be causing this? This machine was installed Friday (today is Monday) and worked perfectly all day Friday.

  Hello WindowzNoob,

  Thanks for posting your query on Microsoft Community forum.

  As you mentioned that this computer is a new installation of Windows 7, so there might be a chance that the drivers are not updated. Then I suggest you to update all the drivers of devices from the link provided below and see if it works for you.

  Before you update the drivers, you try to run the troubleshooter under construction for hardware devices.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Now if you're talking about drivers then you can follow the steps described in the following Microsoft article and see if it helps to update the drivers.

   

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows/update-drivers-recommended-links#update-drivers-recommended-links=Windows-7

   

  Automatically get recommended drivers and updates for your hardware

  http://Windows.Microsoft.com/en-in/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

   

  If the problem persists, try to update the drivers from the manufacturer's website and if you can't find it, please provide us with brand and model of your computer and we will help you find the latest driver available.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• How do I pair the Phillips with Window 7 blue tooth headphones in computor

  How do I pair the Phillips with Window 7 blue tooth headphones in computor

  amalrajc

  See if this will help.

  Add a Bluetooth device

• "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".

  Original title: when setting up Windows Media Center, I get the error message: "IR hardware not detected".

  I have an internal TV Tuner that has been installed by HP, when I bought recently a "computer build-your-own." (According to the control panel Device Manager, my tuner is a Win TV HVR 1290, made by Hauppauge). The computer came with Windows 7. While installing Windows Media Center, after setting up the TV Signal (on channel 3) I am able to see a video thumbnail on my computer screen. I am also able to change the channel using my remote control U-Verse (not the Windows remote control supplied with the computer). So far so good! I then hit next and get the following message: "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".  After you receive this message, the installation procedure is completed. I called HP that support intalled the tuner. They had not the slightest idea what to do. I then called Hauppage customer (manufacturer of TV Tuner). They said that I need to plug one end of the IR Blaster cable that shipped with the computer in a slot in the back of my computer (they told me which slot). They said so to run the IR all the way cable to my cable box and the other end of the cable to my cable box of band. They said it was necessary to be able to use my Microsoft Remote to instruct the box to change channels (cable IR stuck on the box). I told her that I did not use the Microsoft Remote, I could change the channel with my U-verse remote (that I preferred to use anyway). He said that it took the cable on the band decoder in order to remove the error message and the installation of Windows Media Center. I then called U-Verse technical adapter who informed me of their set-top boxes (made by Cisco Systems) do not have the ability to receive signals IR IR Blaster cable (or any othe IR signal source). Microsoft is apparently not understand how U-Verse set-top boxes are designed to work and sells a product incompatible remote control/IR. My question is this: How do I set up Windows Media Center, in order to avoid getting the error message "IR hardware not detected" when you install Windows Media Center and just use the remote control of the U-Verse that I prefer to use in the first place. Once understand you this point, please send the information to HP, At & T U-Verse and others. Thank you.

  Ron, I have something for you!

  and for all the people who have this problem :)

  Hi, I had the time of IR not detected in Windows 7 Ultimate with a TV wonder 650 card and a box of digital adapter from Verizon for my PC... Go on the road to installation and after the Media Center channel search, choose manual configuration. Choose the aerial signal (I aso picked after this analog) l. After he sought more, he finds no channels.  Do not be afraid. Just accept it and go to the main settings page in the Mediacenter. If I remember correctly, then select TV Guide. Choose Add channel. I added the channel 3.

  Since my Verizon box has no IR for the computer, I added the channel 3 for the media Center and I change the channels with my Verizon remote. All my stations in the Verizon box go to Channel 3.

  The story here is so, for some reason any Windows detects that only my box channel signal TV and you must manually configure the media center on the air, then go to settings and add the channel you want in the guide.

  Why the guide TV control which channel you can tune is beyond me, but the scanner locks all channels, it does not detect. they must be added manually in the guide.

  My TV works and looks okay now.

  It actually works!

  the only problem is that it is not in HD

  but there is something

  
  

• Windows 8 blue tooth does not connect devices

  Hi, Windows 8 blue tooth does not connect devices

  1 - Adding devices is interrupted and the phone always appears offline.
  2 and in the bluetooth icon (bottom right of the screen) the option 'allow a device to connect' is never on/available.

  I tried with multiple devices and they are all perfectly between them, has never worked with the computer! Who have already tried with the (uninstalled) disabled antivirus and it worked too!

  Hope you will reply soon

  Best regards

  JPCR

  Hi JPCR,

  It seems that Samsung has not yet released the compatible Bluetooth drivers for Windows 8. So, you can try to install the drivers in compatibility mode and check out. Here is the link where you can download the drivers for Windows 7.

  http://www.Samsung.com/us/support/owners/product/NP300E5A-A01UB

  Follow the steps to install in compatibility mode:

  a. right click on the driver installation file and select Properties and then tap or click on the compatibility tab.

  b. check the box run this program in compatibility modof e.

  c. press or click the menu drop down and select a previous operating system, and then tap or click OK.

  Reference:

  Make the programs more compatible with this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  Let us know the results.

• Windows could not automatically detects the network proxy settings

  Recently, I noticed a triangle appearing little attention with my network icon in the taskbar. When I right click and solve problems, it comes with this message. Windows could not automatically detect the network proxy settings. My internet has been really slow lately, but I wonder if there is a problem with my network? or is - something that my ISP has set?

  (This message is intended for all problem reports)

  Check the Internet Options (Internet Explorer tools or configuration panel / /Connections Options tab / LAN Settings and make sure that Proxy Server is not checked even if you use Firefox.)  Check the settings in Firefox Tools / Advanced connections / settings (should be use system proxy settings or no proxy).

  Search for malware, especially using malwarebytes.

  Try these commands in this order in an elevated command prompt.  Not the first first, then reboot and try.  If still bad, try the second.

  netsh winsock reset
  netsh int ipv4 reset

  If they do not help, please after the output of a command ipconfig/all-order

• Windows 7 will not detect THE routers wireless, including mine.

  Windows 7 will not detect THE routers wireless, including mine. I inserted the cd of restoration of the system, and after that he picked up no internet. No, even if I connect it with the wire! Help!

  Hello

  Thank you for contacting Microsoft Community.
  Is properly installed wireless adapter driver?
  Go to start-> type devmgmt.msc-> press on enter. In the Device Manager window, expand network adapters. You should be able to see a list of network adapter as Ethernet, Bluetooth, etc. Make sure that you can find the adapter wireless from the list. If so, double-click it. Properties windows will be open. On the general tab, under device status, if it shows that the device is not functioning properly, please remove the case, locate the wireless network card and make sure the connections of antennas are coneected correctly. If even a connection is not properly connected or damaged, you cannot connect to any WiFi network.
  Response if the issue is not resolved.

• Window can not automatically detects the network proxy settings

  Original title: window could not automatically detect the network proxy settings
   
  Windows network diagnostics says constantly "" window could not automatically detect the network proxy settings"" How can I fix it I have a Windows laptop, 8 and I can't use the internet, most of the time, but the internet bars are full and there is no yellow triangle with a! next to him.  Usind Ethernet instead of WIFI makes not much difference if you please, help.

  

  

  Hello Sarandeep Singh,

  Thanks for your reply Sarandeep. Now, this problem has been resolved. I that follows the steps of: https://support.microsoft.com/en-us/help/15287/windows-why-can-not-get-connected ( run Networking command after using the convenience store network )

  Thanks again.

• "windows 8 cannot automatically detect the network proxy settings."

  Several times a day on my new Windows 8 I get the message "Windows could not automatically detect the network proxy settings." I then use the troubleshooting tool that detects the parameter and am back in business, but why should I have to do every hour or so? After being on the Windows Support, the same problem is triggered, but responses are always to Windows 7, nothing about Windows 8.  Sometimes the message is "the default gateway is not available. Using a wireless connection and had no problem at all when you use Windows 7, it's only been 8 download it has become a pain. Anyone out there have the answer please?

  Hi Chris,

  Thanks for posting your question on the Forums of community of Microsoft.
  Description of the question, we understand that you get "the default gateway is not available" error when access wireless network.
  Let us move forward and help the issue.
   
  If you could answer a few questions that would help us resolve this problem:
  1. don't you make changes to the computer before the show?
  2. What is the brand and model of the computer?
   
  Here is a link that you can follow to resolve the problem:
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-za/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1
   

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• Can not switch to OSX Recovery Mode: looking for the keyboard and magic mouse

  I'm trying to reset my end 2012 Mac Mini 2.3GHz/i7/16GB to factory settings to try to get the machine a new lease on life.

  However, when I try to enter in Recovery Mode (in now command ⌘ + R when the system starts up), the machine will stop to a screen showing the instructions to turn on a magical keyboard and Magic Mouse.

  I have a trendy apple (USB) keyboard and a USB mouse is connected.

  How can I activate these entries, or how can I pass this screen looking for a keyboard/Magic Magic Mouse?

  [I guess one option is to use a magic mouse or a magical keyboard - I have in my office - but it is not sensible that you need them to access recovery mode].

  Thank you

  Got my Magic Mouse of the office, got into recovery mode. Surprised, you need a Magic Mouse, and who does not have a USB mouse to the recovery mode!

• My iMac cursor is stuck in the upper left corner of the login screen and I can't move it and now I can't use my iMac. What can I do? My iMac is a 27-inch 2014 release (one thin without retina display) and uses the keyboard and wireless mouse.

  My iMac cursor is stuck in the upper left corner of the login screen and I can't move it and now I can't use my iMac. What can I do? My iMac is a 27-inch 2014 release (one thin without retina display) and uses the keyboard and wireless mouse. It runs OSX Mountain Lion (not sure which version) and is a model 27 inches.

  have you tried to change the batteries in the mouse?

• I want to connect a keyboard and a mouse to a work of will the Microsoft Wireless Optical Desktop 1000 Wii?

  I want to connect a keyboard and a mouse to a work of will the Microsoft Wireless Optical Desktop 1000 Wii?

  Hello

  The Microsoft Wireless Optical Desktop 1000 offers freedom wireless and access touch to web and email facilities. RF wireless functionality gives you the freedom to sit and relax.

  It works with a radio frequency and unable to connect to WIFI.

  It will be useful.

• "A required CD/DVD device driver is missing. If you have a driver floppy disk, CD, DVDm and USB flash drive, please insert it now. Roman Si the windows installation media is in the drive, you can remove it for this step. »

  When I try to install window 7 ultimate my Windows vista ultimate, the spectacle of the window the following error message "a required CD/DVD device driver is missing. If you have a driver floppy disk, CD, DVDm and USB flash drive, please insert it now. Roman Si the windows installation media is in the drive, you can remove it for this step. "I have the"TSSTcorp CDDVDW TS - L632H ATA Device"CD/DVD-ROM drive, and and it come preinstalled with no driver disk.  So is there a solution to the problem?

  You could try to copy the contents of the DVD to a folder on your hard drive. Then start the installation from there.

  (I've seen a post or two during the upgrade to Windows 7 64 bit of Vista 32 bit). Could just be a funky DVDROM drive problem. Copy of the files should ignore the issue.

  I hope this helps!

  Mark <> Microsoft Partner

• installed a keyboard and wireless mouse and the mouse works fine, but the keyboard types the wrong keys! Any ideas? Thank you

  installed a keyboard and wireless mouse and the mouse works fine, but the keyboard types the wrong keys! Any ideas? Thank you

  Wired or wireless - is usually not serious unless the wireless can get more interference.  If the keyboard is close to the receiver which is connected to the computer and you get the strikes hurt - my suggestion is to try first the keyboard on another computer.

  To do this, * not * require you to install specific drivers.  Simply unplug the combo of a computer and in the other and see if the keyboard works correctly.  Then, you can troubleshoot from there.