Bluescreen error unable to start

Similar Questions

• ERROR: Unable to start Bluetooth stack service

  I seldome use features wireless to my pc before, but now that I have the wireless router I frequelty use it. Usually, I turn on the wireless switch and turned off to save the battery. I noticed every time I turn on the radio, after a few minutes, that an error message is displayed:

  BTTray

  ERROR: Unable to start Bluetooth stack service

  I don't know if what is wrong with my laptop. Please if anyone can tell me if what is wrong with this thing. Thank you very much!

  HP pavilion dv6820ee

  OS: Windows Vista editions Home premium.

  Message edited by xXxonins on 12/22/2008 05:27

  Access your product download page and reinstall the software for bluetooth under networks:

  http://h10025.www1.HP.com/ewfrf/wc/softwareList?OS=2093 & LC = on & DLC = in & CC = US & Product = 3716846 & lang = in

  then, under network connections in the network and sharing window - see if you have a bluetooth adapter that is listed.  If you do not use bluetooth, you can turn it off or you should be able to set it up properly.

  If fails it then in Control Panel, under administrative tools, Services - locate service BTtray and disable it.

  HTH

• Need help message' w/error Unable to start the s window media Interface. Make sure you have at least WMP10. »

  I downloaded WMP11 to download another program and I get this message ("unable to start the s window media Interface. Make sure you have at least WMP10. »).  This message appears when I click on the new program and it loads.  As soon as it loads the first program screen appears and displays this error message on WMP 10.  When I click ok it goes, but I can't get the new program to do anything.

  So before asking on the problem of new program, I would like to fix this so it keeps popping up.
  I'm not too calculates saavy so I need clarification.

  Thank you

  Where did you downloaded WMP 11?

  Uninstall WMP 11 and check again the issue. If it stops then reinstall WMP 11.

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=8163

• Error: "unable to start Windows XP" after recent updates

  Original title: Windows XP blocked

  Hello, I have 2 computers with Windows XP with SP2 and automatic updates. After the updates (17 June), two computers refuse to start. I get the message "Unable to start Windows XP" with different options to choose from, Mode without failure, last Configuration and boot Windows, but none of them works, he keeps just show this message even after trying in vain to restart. What can I do? Desperate enough now. Thank you.

  Hi GatoJ,
   

  Disable the automatic restart in the event of system failure of the Windows startup option to know the error originally this problem.

  Disable the automatic restart in the event of system failure

  This option prevents Windows from automatically restarting if an error of Windows to fail.

  See this link to start in safe mode startup option:

  A description of the options to start in Windows XP Mode

• Error "Unable to start properly" for LR4

  I just installed LR4 on a new laptop running Win 8.  I get the following error when I try to start LR4 "unable to start correctly (0xc000007b)" I restarted the computer after installation. Any suggestions on how to solve this problem.

  Try http://helpx.adobe.com/lightroom/kb/error-unable-start-correctly-0xc00007b.html

• HP Pavilion Entertainment Notebook dv6-2150: ERROR Unable to start Bluetooth stack Service

  In recent months, the referenced error message appears after I turned on my computer - Bluetooth stack Service cannot start.  Can someone help me?

  S

  Well I really appreaciate help especially when it's done volunteer work.

  OFF to try the solution!

  Thank you, really

• Error: "unable to start the service Object Push Profile (OBEX OPP)" when trying to transfer files from the Android phone via bluetooth

  Original title: Android mobile phone via bluetooth, I get an error on my phone.

  When I try to send a file by my Android phone to my laptop via bluetooth, I get an error on my phone saying "cannot start service Object Push Profile (OBEX OPP)". Reason: The return value is "false", but I can send files from my laptop to my phone OK.

  Hi steve3624,

  We recommend to check if there is no parameter which must be activated on your phone, then try to transfer the file to your laptop.

  We also advise to check if there are any service name Object Push Profile and start it. To do this, try the following steps:
  a. Click Start, type services.msc and press to enter.
  b. in the list of services, locate Object Push Profile service and double-click it.
  c. change the startup type to automatic and click on the Start button to start the service.
  d. click ok to apply the changes.

  For further assistance, please get in touch with the assistance of the Android team.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• STOP 0x0000008e error, unable to start or reinstall Windows XP.

  Original title: XP will not start or reinstall.

  I have XP as my OS and I can't start normally, safe mode, format or reinstall.

  Normal startup is not found.

  Safe mode comes up with different drivers missing ex.\windows\system32\DRIVERS\iaStorV.sys.

  Council of recovery is not usable, put it back, stops and stops at blue screen with:

  stop: 0xc0000008e (0xf90de75c, 0xc0000005, 0xf95189a8, 0x00000000)

  Setupdd.sys - address f95189a8 base at f94f1000, datestamp 41107c8f

  Hello

  You can check in the BIOS (Basic Input Output System) if the CD/DVD drive is set as the first priority in the boot sequence. If this isn't the case, set the CD/DVD drive as the first priority in BIOS and then try to boot into the Recovery Console.

  Note: Changing the BIOS / chipset can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/chipset can be solved. Changes to settings are at your own risk.

  Then, you try to run chkdsk from the Recovery Console and check if you are able to boot to the desktop.

  At the Recovery Console prompt, type which Suits, and then press ENTER:

  CHKDSK [/ p]: [/ r]

  Note: At first, try to run chkdsk/p & check if it helps. Later, you can run chkdsk/r.

  Reference: How to install and use the Windows XP Recovery Console 

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I get the error "Unable to start the service" on attempts to run administrative tools (including the Services application) when logged in as an administrator?

  A large number of menu selections is affected, including the 'computer management', 'Event Viewer', 'Services' and 'System Configuration'.
   
  I tried to clean a computer that was thus invaded by unwanted applications and the services that it was unusable.  I applied several sets of Windows updates until it has been fairly stable, then lightened through the Services application services, changing many services 'automatic' to 'enabled' or 'disabled '.  I suspect that some service necessary for the performance of the foregoing has been inadvertently stopped.  (None that he was '' strongly recommended '' or '' recommended '' do not turn off or the description seemed to make a requirement, but...)  I don't know how to confirm this theory, identify the missing service or reactivate a service without the Services application.

  I got lucky.  I called a local, independent computer store.  Their support staff (after confirming that I had an appropriate Windows license) told me that if the computer came with a disk for Installation of Windows Vista, there is probably a partition to start installation on the hard disk, I could get to with a special touch at the beginning of the start-up phase of the BIOS.  It flashed by so quickly that I missed my chance, so I put off the power while trying to boot Windows.  On my next attempt, I missed again (even if I managed to spot the key combination - F11).  But when he arrived at the start-up phase of Windows, he offered me a chance to run the system restore which was banned when I was logged in with an administrator account.  I had to go back a ways, but I found one who would start and was able to complete cleaning of the machine and make it to a usable state.
   
  Thanks to all who responded.
   
  Oh, and it seems (according to my conversation with the service of the local computer store) that my fatal mistake was by disabling the service allowing you to promote its own security.  Apparently an administrator account is not the rights needed to perform most administrative functions without it; If disabling the service gets you into a nearly unrecoverable state.  A hint of that in the description of the service, or even a total ban on deactivation, would be a good idea.
   
  -Kevin

• I have a dell xps with vista and get the error "unable to start windows.

  I can then choose the launch startup repair or start windows normally.  as soon as I clicked launch startup repair, he says that it is not able to PC repair.  I tried to enter safe mode, it restarts, flashes a blue screen and takes me to start the reboot system again.  I tried to run a recovery from a previous version of my sw windows (via the options in advance in the Startup Repair menu), but this does not solve the problem of boot loop.  I can get to a c prompt, but that's all.  I prefer not to use the dell factory image restore and losing all my files.

  today

  Run dell diagnostics

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&CS=19&l=en&s=DHS&docid=DSN_A9E3A15597A04AFBB02EE16785D39C5C&isLegacy=true

  Data recovery

  1. remove the hard drive and it slave in another computer

  2 buy or borrow a USB disk drive hard put in yout case then plug it into another computer and read the hard drive like this

  3. try Knoppix

  http://www.Knopper.NET/Knoppix/index-en.html

  BUT this method 3 depends on your hardware in the computer that failed

• Re: Error: unable to start Bluetooth stack service

  I have a HP Pavilion Dv7-2111TX laptop, I have wrong came running 'CCLEANER' to things well arranged and it seems to have removed or changed the Driver or the registry. I deleted my laptop since Bluetooth devices and restored several times, computer says device correctly paired and ready to use, but every time I try to send pictures via Bluetooth, "Sending failed". Unfortunately, I've never backed up the hard, so there is no Restore Point. Any suggestion would be appreciated.

  The strange thing about all this is that, according to your product specifications, you do not have Bluetooth and I can't find drivers for Broadcom to your models support page?

  http://support.HP.com/us-en/document/c01820313

  Use this driver for the HDX/dv8 machines, it is very up-to-date and work. If all goes well, it will solve the problem.

  http://www.hphdx.NET/FAQ/tabid/62/TID/9/CID/6/default.aspx scroll down until you come to Broadcom 2070 Bluetooth, version 6.3.0.6300

  It is here the direct link to the file as well.  ftp://ftp.HP.com/pub/SoftPaq/sp50001-50500/sp50180.exe

  Save it on the desktop and install it from there, not in a temporary folder. After installing the driver back to Services and to ensure that the two are set to automatic and that they are started.

  You can also try to go back as far as you can restore Windows or lat Windows choose the restore point.

  

  Have you tried to restart the two services and the start of your machine?

• UdaterUI.exe error "Unable to start application" stack application Visual studio 2012

  Someone else make a mistake after assigning an application with Visual Studio 2012 and SQL Studio 2012 stack.   After taking different post, I got rid of the "invalid license".   Now, the appstack works but takes 5 to 10 minutes to open a session and I get error udaterUI.exe.   According to google its related Mcafee that is not installed on the provision of VM, concerning a fact, I tried to create the appstack with and without Mcafee, but the same results.   I also follow all the best practices.   To be clear, the app stack sorta works once you click OK to the error, but like to get rid of this error all together.

  Windows 7 32

  volumes of App 2.10

  Visual studio 2012 u5

  SQL Studio 2012

  

  In fact, found the solution... McAffee VSE 8.8 needed to be patched to version 6.

• Adobe first elements 9 error "unable to start the program as .dll is missing...". "

  How can I fix it?

  What operating system do you use? Have the program used to work? On the same operating system?

  Did you manually went to Windows Update to ensure you have all the updates, including non-critical updates install automatically?

  Have you ensured that you have the latest Quicktime, by the requirements of the program?

• Satellite P200HD-1DV: the error event to the startup-unable to start a DCOM Server

  Whenever I restart it is extremely slow and in my opinion, caused by the following 2 errors that appear in the system as event ID 10000 event log:

  Unable to start a DCOM Server: {7160A13D-73DA-4CEA-95B9-37356478588A}. Error: '2 '.
  Happened at the start of this command:
  C:\windows\system32\igfxext.exe-integration

  Unable to start a DCOM Server: {078AEF33-C48A-49F7-AFF3-A0EE810BFE7C}. Error: '2 '.
  Happened at the start of this command:
  C:\windows\system32\igfxsrvc.exe-integration

  I think they are Intel drivers, but have failed to find a cure for this problem.
  Other than a real slow start it seems no problem.
  Am that I the only one having this problem and everyone know the cure?

  So, you understand where the problem is but why didn t you have installed graphic drivers intel one another? I mean, you know where is the problem and you can correct it.

  Otherwise, if a reinstallation does not help, it would be better to completely recover your system to eliminate the problem.

  Greetings

• Error BTTray: Unable to start Bluetooth Stack Service

  I have an Envy 17 3D (product number: LV045UA #ABA). Recently, shortly after startup, I get an error to the effect that there is a BTTray error as it is unable to start bluetooth stack service.

  I use a Bluetooth Logitech mouse and the mouse continues to work. Befire I started having error, periodically that the mouse could be suddenly disconnected and I must initiate a discovery of the mouse with the Bluetooth discovery mechanism.

  Usually after the rediscovery of the mouse, I would have no other episodes for several days with a new day evey bootup. The error is only a recent development, but the episodes of disconnecting long enough.

  I'm not even sure that the two are linked, and I watch inconsequential number BTTray. However, I want to solve this problem of BTTray error until something of consequence occurs.

  Kind regards

  S.M. Cohen

  Hello

  Please reinstall the driver for Bluetooth module and this problem will be solved.