Bluetooth PIN

Similar Questions

• EliteBook 6930p: Bluetooth pin code

  Hello!

  I'm trying to connect my Smartphone from Huawei y360 to Elitebook computer 6930p laptop via bluetooth but Huawei asks for a pin code and I don't know what it is. I tried: 0000, 1111, 1234.

  I unpaired and re-paired them and now the laptop gives a random code that I entered the phone and now it works!

• OfficeJet h470: Officejet h470 bluetooth with lozenges of galaxy Samsung... asking to enter a PIN.

  Under settings/bluetooth on my Samsung Galaxy tablet, it detects the Officejet h470, but it asks me to enter a PIN. I have a HP bluetooth supplied with the printer, but I can't find a PIN written on this subject? He also says that I have to type the pin code on the printer, it is impossible to do!

  I have searched this forum but could not find anyone with the same problem.

  Anyone know how to bypass this?

  Hello

  Enter the default PIN Code which is '0000' (four zeros).

  If denied that reset the bluettoth settings as follows and then try again:

  1. Press and hold the power button.
  2. While pressing the Power button, press the button cancel 4 times, and then press the button repeat 6 times.
  3. Release the Power button.

  Now try to connect to the Bluettoth device using the value by default "0000" code to access again.

  Kind regards

  Shlomi

• Computer laptop compatible Bluetooth wants PIN of Photosmart C309a for twinning

  I just bought a laptop compatible Bluetooth asking you a PIN for my Photosmart C309a to mating in order to install the printer.  It seems that it is the only way that it will allow me to install the printer.  Any help would be appreciated.

  Hi, have you tried 0000 because it is likely the number of standard pins. If this is not the case, check the bluetooth menu on the printer.  It should be in the standard configuration menu, so press setup and scroll until see you Bluetooth settings.

• If connected via Bluetooth with car. Phone starts to compose himself after updating iOS 10

  After updating iOS 10: connection via Bluetooth for car, then phone (iphone more 6s) began to compose himself. My President iPhone which is not longer work well

  Hi Pharao-nael,

  I understand that after update your iPhone to iOS 10, he begins to call itself when it is connected to Bluetooth. I know it's important for your iPhone to work as expected, so I'm happy to help for this.

  Since this occurs only when it is connected to Bluetooth, the first thing you want to do is cancel the twinning of the car:
  Configure and use third-party Bluetooth - Apple Support Accessories
  

  Turn off pairing a Bluetooth accessory

  To disable the pairing a Bluetooth accessory, tap Settings > Bluetooth, find the device you want to disable the twinning, tap , and then we forget this device.

  When you forget this device on your iPhone, iPad or iPod touch, this accessory is removed from the list of available Bluetooth devices.

  Make sure that your iPhone does not seek to call itself after it is disconnected, and then you can pair the iPhone and the car again:
  

  Pair your device with a Bluetooth accessory

  1. On your iOS device, tap on settings > Bluetooth. Stay on the screen until you complete the steps to pair your accessory.
  2. Place your accessory in discovery mode and wait until it appears on your iOS device. If you don't see it, or don't know how to make it discoverable, check the instructions that came with your accessory or contact the manufacturer.
  3. Tap your accessory pair. You will have to perhaps enter the CONFIDENTIAL code or password. If you do not know what your PIN code or word password, see the documentation for your accessory.

  When pairing is completed, you can use the Bluetooth accessory with your device. You can pair several Bluetooth accessories with your iOS device. Just follow the steps above to pair additional accessories.

  Thank you for using communities of Apple Support, cheers!

• 3160 AC 7260 Intel wireless upgrade - missing bluetooth Satellite z30-b-100

  Hello

  I updated the AC wireless intel 3160 to 7260. The wlan and the WiDi work but, but bluetooth has disappeared from the Device Manager of. I tried to install the updated BOF this combo card. I can't install but the bluetotth does not work. Any ideas?
  I have red, this one sulution is by typing the PIN 51 card (it applies to version HMW). But my map is NGW 7260. I don't know what to do with this card, I can't find any PIN diagram.

  Kind regards
  István

  Dear Gladyshof,
  I can't read your post. Something wrong with the characters
  Concerning
  István

• Apple Watch to a bluetooth speaker matching

  How to pair you an Apple Watch to a Bluetooth speaker?

  Hi Timothy

  To connect a Bluetooth to your Apple Watch speaker:

  -Turn on your Bluetooth speaker in discovery / mode (follow the instructions provided by the manufacturer) coupling.

  -To your Apple Watch, go to the home screen (press the digital Crown), then press settings (the cog icon) > Bluetooth.

  -Your watch will now search for Bluetooth accessories that are in discovery / pairing mode.

  -Choose your Bluetooth speaker when it is shown.

  -If asked, enter a password or PIN.

  More information:

  Use the Bluetooth with your Apple Watch - Apple Support Accessories

• HP Officejet Mobile Printe 100: Bluetooth pairing

  I have a LG-D500 4.1.2 android. feature phone that I'm trying to pair it with my new 100 HP mobile printer.   The bluetooth of phone detects the printer and then ask a PIN as 0000 or 1234.  None of these base pins are accepted by the pairing process.  Need help to get matching conducted, or a way to get around, so I can use this printer on the road.

  I also installed the application "Printshare.  So, I'm ready to go.  Just I have to get this dang thin pin situation.

  Hello

  The ships of the printer with a predefined access key that is set to six zeros '000000', tyoing this password should allow to connect to the printer.

  If you encounter problems, you can also reset the Bluetooth settings as follows, a reset will set the password as "000000" as the default:

  http://support.HP.com/us-en/document/c02643374/

  Shlomi

• iPhone 5 s will not play with lightning cable 30 pin to the Apple Dock to stereo is there a setting I need to change?

  I'm an iPhone 5 to 30 pin docking station with a 30 Apple stem to connect to cable of the lightning. The audio is not played through the docking station. He plays on the speakers of phones. Is there a setting on the iPhone I need to change? The stereo docking station works with my old iPod 30-pin. I turned off Bluetooth and it did not help. I use the Amazon music app. It's iOS 9.2.1 podcasts will also not play through the docking station. Music and podcasts will play through the cable that connects the docking station for stereo if plugged into the headphone. However the sound is not as strong or as good.

  Can you connect the speakers to the phone via Bluetooth docking station?

• Detection of Services by satellite A665 Bluetooth error

  Hello. I have an A665 Satellite. One month, I used the logitech V470 bluetooth mouse. These last two days, the bluetooth Wizard cannot connect with the mouse or any bluetooth device. After a search for devices, the wizard recognizes the different devices in the range, but when I select one and try to connect, a service discovery error every time. Any help will be appreciated.

  Try the following:

  > Click right icon Bluetooth
  > Options...
  > Assistant
  > Uncheck 'Enable Auto search devices' and 'automaton PIN code entry ".
  > Click 'Apply' then 'OK '.
  > Remove the icon of the mouse (mouse configured, if it exists) in the Bluetooth settings window
  > Click on ' Bluetooth > Options... '. "in the Bluetooth settings menu
  > Security > custom level >
  > Check the item to Mode: 'forced link security level '.
  > Click 'OK' and 'Apply' then 'OK '.
  > Remove the batteries from the mouse for a few seconds
  > Press the pairing at the bottom of your mouse for a few seconds
  > Click "New Connecton" in the Bluetooth settings window.
  > Continue with the installation. (Enter the proper PIN code if you use the mouse for example '0' or '0000' or what ever the manual mentions)
  > Continue until installation is complete

  Turn off again put security if the installation was successful.

  > Click on ' Bluetooth > Options... '. "in the Bluetooth settings menu
  > Security > custom level >
  > Deselect the fashion element: 'forced link security level '.
  > Click 'OK' and 'Apply' then 'OK '.

• Satellite L755D - Connect via Bluetooth not accepted AirTrack speakers?

  I try to connect my soundbar via Bluetooth. Soundbar detects my PC.
  I use the Bluetooth Wizard, and it also detects my soundbar, AirTrack E550.

  But when installing speakers, I get a message that my device is not accepted?
  Can someone help me with this problem?

  Bluethhoth Stack for Windows by Toshiba, version v8.00.06 (T) is installed.

  My PC: Satellite L755D

  Hello

  I think that must be the PIN code while trying to connect the two devices.
  If you will be asked to go through the code, you must put 0000 (4 x zero)
  You can only connect a BT (portable) device that supports the A2DP (AV) features.

• How to use Bluetooth?

  I want to just send and receive files on my laptop, how do I do this? It keeps telling me to plug in the device. So I plugged my phone by USB, and it's always tell me to plug in the unit. The only way I can now send files is USB, but I would prefer Bluetooth.

  Using the LV is very simply.
  For two months, I have LG BL40 new chocolate GSM and I use it with Qosmio X 300.
  Here is the use of mobile phone with laptop not using BT:

  # Activate the WLAN using the WLAN switch on your laptop (LED orange must be turned on)
  # Activate the BT module by using the FN + F8 key combination (maybe this will start installation BT module first). Wait until the BT equipment is installed correctly
  # Activate the BT on your mobile phone
  # Click right mouse on the BT symbol in the taskbar and select the option Add a new connection
  # The new connection wizard will open. Leave the express mode option and click NEXT. When the phone is found and displayed in the window to go again to the NEXT. Confirm the pin code and your phone will be connected to your laptop.
  # The new icon will appear in the window settings Bluetooth. Click with the right button of the mouse and select the Connect option.
  # You can now use your mobile phone as modem.

  For data transfer using wireless file transfer option. You can see this option, if you click with the right button of the mouse on the BT symbol in the taskbar.

  All that s.

• Problem Pairing device: Bluetooth virtual keyboard (VKB) detection of service failed

  Hi, I could use help to determine the cause and the solution to a problem I have. I want to associate this with my Toshiba Tecra M4-S435 keyboard. The laptop has an internal module installed, "Cambridge Silicon Radio, LMP (V: S) 02:0490." I installed the last 5.10.01 (T) BT stack. I have several other paired devices, but this one is the original questions.

  The unit is in the discovery as a keyboard VKB (it supports HID and SPP); I want to use the HID profile. In the authentication dialog, the VKB beeps, who is his warning that a PIN can be typed into the unit, but to hit the enter key, a dialog box informs me that "Detection of Service Failed". I've seen similar problems posted on the manufacturer's website, but I have not seen any resolution.

  Any help is greatly appreciated.

  Hello

  I m not an expert from BT, but if you have several other devices with your laptop coupled, then everything is ok with your Tecra M4 BT stack and the machine.
  It seems that there is a compatibility problem with your external virtual Bluetooth keyboard.

  Either the Toshiba BT stack does not support this VBK and service or the firmware of this device allows a few worries
  However, in case I would recommend contacting manufacturing virtual Bluetooth keyboard for more details.
  Guys should more known on own products as simple Toshiba here users in the forum.

  Good luck

• Portege 4010 Bluetooth - connection for samsung and motorola phones probs

  I have a portege 4010 with bluetooth. I am trying to connect to our two phones - a samsung sgh-e370 (newish) and a motorola V600 (2 years). Both have BT I downloaded and installed the latest Tosh BT stack (4.0.something). Shows Device Manager four drivers of tosh in BT - all are OK. I have allowed the discovery and allow the connection on the tosh. I did the same thing on the phones. When I run the "Add new connection" Wizard on tosh, he finds two phones and they appear under the devices section in BT Manager with the names I gave them on real phones. However, neither picked up phone tosh and showed no tosh by asking the numbers of pins on the phones.

  The net result is I now two phones display in BT Manager, but if I click on is and choose use log I recover the error "connection failed".

  If I try to find the portege using the phone, the samsung it is but motorola doesn't have. I can't get the motorola to twin with the tosh - it just says "unable to pair up with the portege.

  Any help gratefully received.

  RJ

  Hello

  I don't really know what is the problem in your case, but I did this a few times with my Motorola RAZR V3 and it works fantastic. The whole was finished for 1 minute. I hope that you do it in the right order, but I am writing to you the steps I did:

  1 activate the Bluetooth using the FN + F8 key combination
  2. install the new hardware if necessary (some of them)
  3. start the Bluetooth stack
  4 turn on the Bluetooth on the mobile phone (discoverable)

  5. Select the Express mode > next
  6. choose visible device listed in 'Bluetooth device list' > next
  7 choose to identify passkey (1234)
  8. Enter the key in the mobile phone. Twinning will be success

  I did it on this path, and now I can send all documents in my Tecra. If you want to use as a modem, you must do this:

  1. after peeling going on Next and configure the internet connection
  (provider number) > finish
  2. the new connection will be created in the Bluetooth stack utility
  3. you can start the numbering with double click or click with the right button of the mouse and choose 'connect '.

• Satellite U400: Problem connecting Bluetooth & PCsuite

  Hello

  I have a little problem with U400 and Ericsson C510 attempts to connect by bluetooth.
  Installed a new bios, bluetooth stack 6.10.10 (T). The bluetooth stack sees C510 but when he tryes said pair "Detection of service failed.

  When I try to pair devices PCsuite 5.009.00 it goes further.
  Suite PC give me the code PIN and C510 request entry, but when I confirm the PIN in the C510, PCsuite returns the error "pairing failed, you want to repeat?

  This time C510 apears in the window 'see devices in the options bluetoothstack...' but PCsuite sees C510 and BluetoothStack or...

  Thank you in advance.

  Hello

  I had a similar problem with Satellite P200 and my mobile phone from Motorola. Yesterday I installed the latest version of stack 6.40.02 BT (T) and all of a sudden, everything works fine.

  Please install the last pile of BT of http://aps2.toshiba-tro.de/bluetooth/ and try again.